在RockyLinux 9.3环境中采用RPM模式部署Oracle 19C

范振勇2024-04-19 0:07

在RockyLinux 9.3环境中采用RPM模式部署Oracle 19C

用途

在开发数据库系统时，可以验证功能是否与Oracle的表现一致，验证正确性和兼容性

限制

  1. 虚拟机安装，CPU 2*4 内存16G 磁盘100G
  2. 目标生产环境是RHEL 9.X，学习环境采用Rocky Linux 9.3
  3. 选择Oracle版本是长期支持版19C
  4. 只验证基础的功能，可以禁用CDB PDB
  5. 安装的Oracle只需要功能验证不用于生产环境，也不进行性能测试

查找资料

  1. bing上查找资料，一般找到的安装Oracle的资料是CentOS 7.x,8.x，而9.x的比较少，找到：
  2. 直接查找官方文档

准备环境

安装虚拟机的过程不再赘述，安装后需要做的准备工作如下：

  1. 关闭防火墙
shell 复制代码 
#检查防火墙状态
systemctl status firewalld.service 
#关闭防火墙
systemctl stop firewalld.service 
#禁止开机启动防火墙
systemctl disable firewalld.service
  1. 关闭SELINUX
shell 复制代码 
vi /etc/selinux/config

编辑内容：

#SELINUX=enforcing  #注释掉
SELINUX=disabled  #增加

存盘退出，下次重新启动后生效。如果想使配置立即生效，执行：

shell 复制代码 
setenforce 0
  1. 配置域名
    采用修改/etc/hostname的方式，重启后生效
shell 复制代码 
vi /etc/hostname
oracle19c.learning.cn
  1. 配置域名解析
shell 复制代码 
vi /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.154.19 oracle19c oracle19c.learning.cn
  1. 配置软件源
    事先将rocky linux 9.3的ISO mount到/mnt/rocky9/
shell 复制代码 
vi /etc/yum.repos.d/rocky.repo
[baseos]
name=Rocky Linux $releasever - BaseOS
baseurl=file:///mnt/rocky9/BaseOS/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9

[appstream]
name=Rocky Linux $releasever - AppStream
baseurl=file:///mnt/rocky9/AppStream/
gpgcheck=1
enabled=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
  1. 准备Oracle RPM
  1. Linux共享Windows目录
    为了节省Linux的磁盘空间，直接在Linux中访问Windows下载的rpm
  • 在Windows中共享保存rpm的文件夹，如名称为//192.168.154.1/Oracle
  • 在Linux中链接Windows的共享
shell 复制代码 
mkdir -p /mnt/oracle
mount -t cifs -o username=xxxx,password=yyyy //192.168.154.1/Oracle /mnt/oracle

请把"xxxx","yyyy"换成实际的用户名和密码

部署Oracle预安装RPM包

按官方文档，安装 Preinstallation RPM时会：

  1. 解析Oracle Grid Infrastructure和Oracle Database所需的依赖项,并自动下载和安装对应的RPM包
  2. 创建oracle用户，将其加入新创建的oraInventory (oinstall)和 OSDBA (dba)组中
  3. 按Oracle数据库预安装RPM程序的建议设置sysctl.conf、系统启动参数和驱动程序参数
  4. 设置硬和软资源限制 Linux进程资源访问限制
  5. 根据内核版本设置其他推荐参数
  6. 在Linux x86_64和Linux aarch64机器的内核中设置numa=off
bash 复制代码 
dnf install -y /mnt/oracle/19c/oracle-database-preinstall-19c-1.0-1.el9.x86_64.rpm
Last metadata expiration check: 0:01:14 ago on Wed 17 Apr 2024 12:02:20 PM CST.
Dependencies resolved.
======================================================================================================
 Package                              Architecture  Version                  Repository          Size
======================================================================================================
Installing:
 oracle-database-preinstall-19c       x86_64        1.0-1.el9                @commandline        33 k
Installing dependencies:
 chkconfig                            x86_64        1.24-1.el9               baseos             161 k
 gssproxy                             x86_64        0.8.4-6.el9              baseos             108 k
 initscripts                          x86_64        10.11.5-1.el9            baseos             210 k
 keyutils                             x86_64        1.6.3-1.el9              baseos              72 k
 ksh                                  x86_64        3:1.0.0~beta.1-3.el9     appstream          879 k
 libXxf86dga                          x86_64        1.1.5-8.el9              appstream           20 k
 libaio-devel                         x86_64        0.3.111-13.el9           appstream           10 k
 libdmx                               x86_64        1.1.4-12.el9             appstream           16 k
 libev                                x86_64        4.33-5.el9               baseos              52 k
 libnfsidmap                          x86_64        1:2.5.4-20.el9           baseos              60 k
 libnsl                               x86_64        2.34-83.el9.7            baseos              77 k
 libverto-libev                       x86_64        0.3.2-3.el9              baseos              13 k
 nfs-utils                            x86_64        1:2.5.4-20.el9           baseos             425 k
 rpcbind                              x86_64        1.2.6-5.el9              baseos              56 k
 sssd-nfs-idmap                       x86_64        2.9.1-4.el9_3            baseos              42 k
 xorg-x11-utils                       x86_64        7.5-40.el9               appstream          106 k
 xorg-x11-xauth                       x86_64        1:1.1-10.el9             appstream           36 k

Transaction Summary
======================================================================================================
Install  18 Packages

Total size: 2.3 M
Installed size: 7.5 M
Downloading Packages:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                            1/1 
  Installing       : libnfsidmap-1:2.5.4-20.el9.x86_64                         1/18 
  Installing       : ksh-3:1.0.0~beta.1-3.el9.x86_64                           2/18 
  Running scriptlet: ksh-3:1.0.0~beta.1-3.el9.x86_64                           2/18 
  Installing       : libdmx-1.1.4-12.el9.x86_64                                3/18 
  Installing       : libXxf86dga-1.1.5-8.el9.x86_64                            4/18 
  Installing       : xorg-x11-utils-7.5-40.el9.x86_64                          5/18 
  Installing       : xorg-x11-xauth-1:1.1-10.el9.x86_64                        6/18 
  Installing       : libaio-devel-0.3.111-13.el9.x86_64                        7/18 
  Installing       : libnsl-2.34-83.el9.7.x86_64                               8/18 
  Installing       : keyutils-1.6.3-1.el9.x86_64                               9/18 
  Installing       : libev-4.33-5.el9.x86_64                                  10/18 
  Installing       : libverto-libev-0.3.2-3.el9.x86_64                        11/18 
  Installing       : gssproxy-0.8.4-6.el9.x86_64                              12/18 
  Running scriptlet: gssproxy-0.8.4-6.el9.x86_64                              12/18 
  Running scriptlet: rpcbind-1.2.6-5.el9.x86_64                               13/18 
  Installing       : rpcbind-1.2.6-5.el9.x86_64                               13/18 
  Running scriptlet: rpcbind-1.2.6-5.el9.x86_64                               13/18 
Created symlink /etc/systemd/system/multi-user.target.wants/rpcbind.service → /usr/lib/systemd/system/rpcbind.service.
Created symlink /etc/systemd/system/sockets.target.wants/rpcbind.socket → /usr/lib/systemd/system/rpcbind.socket.

  Running scriptlet: nfs-utils-1:2.5.4-20.el9.x86_64                          14/18 
  Installing       : nfs-utils-1:2.5.4-20.el9.x86_64                          14/18 
  Running scriptlet: nfs-utils-1:2.5.4-20.el9.x86_64                          14/18 
  Installing       : chkconfig-1.24-1.el9.x86_64                              15/18 
  Installing       : initscripts-10.11.5-1.el9.x86_64                         16/18 
  Running scriptlet: initscripts-10.11.5-1.el9.x86_64                         16/18 
Created symlink /etc/systemd/system/sysinit.target.wants/import-state.service → /usr/lib/systemd/system/import-state.service.
Created symlink /etc/systemd/system/sysinit.target.wants/loadmodules.service → /usr/lib/systemd/system/loadmodules.service.

  Running scriptlet: oracle-database-preinstall-19c-1.0-1.el9.x86_64          17/18 
  Installing       : oracle-database-preinstall-19c-1.0-1.el9.x86_64          17/18 
  Installing       : sssd-nfs-idmap-2.9.1-4.el9_3.x86_64                      18/18 
  Running scriptlet: oracle-database-preinstall-19c-1.0-1.el9.x86_64          18/18 
  Running scriptlet: sssd-nfs-idmap-2.9.1-4.el9_3.x86_64                      18/18 
  Verifying        : chkconfig-1.24-1.el9.x86_64                               1/18 
  Verifying        : libverto-libev-0.3.2-3.el9.x86_64                         2/18 
  Verifying        : initscripts-10.11.5-1.el9.x86_64                          3/18 
  Verifying        : rpcbind-1.2.6-5.el9.x86_64                                4/18 
  Verifying        : libev-4.33-5.el9.x86_64                                   5/18 
  Verifying        : sssd-nfs-idmap-2.9.1-4.el9_3.x86_64                       6/18 
  Verifying        : gssproxy-0.8.4-6.el9.x86_64                               7/18 
  Verifying        : nfs-utils-1:2.5.4-20.el9.x86_64                           8/18 
  Verifying        : libnfsidmap-1:2.5.4-20.el9.x86_64                         9/18 
  Verifying        : keyutils-1.6.3-1.el9.x86_64                              10/18 
  Verifying        : libnsl-2.34-83.el9.7.x86_64                              11/18 
  Verifying        : libaio-devel-0.3.111-13.el9.x86_64                       12/18 
  Verifying        : xorg-x11-xauth-1:1.1-10.el9.x86_64                       13/18 
  Verifying        : xorg-x11-utils-7.5-40.el9.x86_64                         14/18 
  Verifying        : libXxf86dga-1.1.5-8.el9.x86_64                           15/18 
  Verifying        : libdmx-1.1.4-12.el9.x86_64                               16/18 
  Verifying        : ksh-3:1.0.0~beta.1-3.el9.x86_64                          17/18 
  Verifying        : oracle-database-preinstall-19c-1.0-1.el9.x86_64          18/18 

Installed:
  chkconfig-1.24-1.el9.x86_64          gssproxy-0.8.4-6.el9.x86_64          initscripts-10.11.5-1.el9.x86_64
  keyutils-1.6.3-1.el9.x86_64          ksh-3:1.0.0~beta.1-3.el9.x86_64      libXxf86dga-1.1.5-8.el9.x86_64
  libaio-devel-0.3.111-13.el9.x86_64   libdmx-1.1.4-12.el9.x86_64           libev-4.33-5.el9.x86_64
  libnfsidmap-1:2.5.4-20.el9.x86_64    libnsl-2.34-83.el9.7.x86_64          libverto-libev-0.3.2-3.el9.x86_64 
  nfs-utils-1:2.5.4-20.el9.x86_64      oracle-database-preinstall-19c-1.0-1.el9.x86_64     
  rpcbind-1.2.6-5.el9.x86_64           sssd-nfs-idmap-2.9.1-4.el9_3.x86_64  
  xorg-x11-utils-7.5-40.el9.x86_64     xorg-x11-xauth-1:1.1-10.el9.x86_64                 

Complete!

注意：安装完成后重新启动系统，确认所有的系统参数已经应用

验证预安装RPM的工作成果（不是强迫症无需关注这一部分）

  1. 检查依赖项，执行命令
shell 复制代码 
dnf repoquery --requires oracle-database-preinstall-19c-1.0-1.el9.x86_64.rpm
/bin/sh
/etc/redhat-release
/usr/bin/bash
bc
bind-utils
binutils
ethtool
glibc
glibc-devel
initscripts
ksh
libaio
libaio-devel
libgcc
libnsl
libstdc++
libstdc++-devel
make
module-init-tools
net-tools
nfs-utils
openssh-clients
pam
policycoreutils
policycoreutils-python-utils
procps
psmisc
smartmontools
sysstat
tar
unzip
util-linux-ng
xorg-x11-utils
xorg-x11-xauth

显示所有的依赖项，说明在部署预安装RPM过程中，检查3个文件和31个rpm的依赖关系

  1. 检查系统配置/etc/sysctl.conf 增加了内容
bash 复制代码 
cat /etc/sysctl.conf

# oracle-database-preinstall-19c setting for fs.file-max is 6815744
fs.file-max = 6815744

# oracle-database-preinstall-19c setting for kernel.sem is '250 32000 100 128'
kernel.sem = 250 32000 100 128

# oracle-database-preinstall-19c setting for kernel.shmmni is 4096
kernel.shmmni = 4096

# oracle-database-preinstall-19c setting for kernel.shmall is 1073741824 on x86_64
kernel.shmall = 1073741824

# oracle-database-preinstall-19c setting for kernel.shmmax is 4398046511104 on x86_64
kernel.shmmax = 4398046511104

# oracle-database-preinstall-19c setting for kernel.panic_on_oops is 1 per Orabug 19212317
kernel.panic_on_oops = 1

# oracle-database-preinstall-19c setting for net.core.rmem_default is 262144
net.core.rmem_default = 262144

# oracle-database-preinstall-19c setting for net.core.rmem_max is 4194304
net.core.rmem_max = 4194304

# oracle-database-preinstall-19c setting for net.core.wmem_default is 262144
net.core.wmem_default = 262144

# oracle-database-preinstall-19c setting for net.core.wmem_max is 1048576
net.core.wmem_max = 1048576

# oracle-database-preinstall-19c setting for net.ipv4.conf.all.rp_filter is 2
net.ipv4.conf.all.rp_filter = 2

# oracle-database-preinstall-19c setting for net.ipv4.conf.default.rp_filter is 2
net.ipv4.conf.default.rp_filter = 2

# oracle-database-preinstall-19c setting for fs.aio-max-nr is 1048576
fs.aio-max-nr = 1048576

# oracle-database-preinstall-19c setting for net.ipv4.ip_local_port_range is 9000 65500
net.ipv4.ip_local_port_range = 9000 65500

注: 原文件备份在/etc/sysctl.d/99-initial-sysctl.conf

  1. 检查系统配置/etc/sysconfig/network 增加了内容
bash 复制代码 
cat /etc/sysconfig/network
# Created by anaconda
# oracle-database-preinstall-19c : Add NOZEROCONF=yes
NOZEROCONF=yes
  1. 检查进程资源配置
bash 复制代码 
cat /etc/security/limits.d/oracle-database-preinstall-19c.conf

# oracle-database-preinstall-19c setting for nofile soft limit is 1024
oracle   soft   nofile    1024

# oracle-database-preinstall-19c setting for nofile hard limit is 65536
oracle   hard   nofile    65536

# oracle-database-preinstall-19c setting for nproc soft limit is 16384
# refer orabug15971421 for more info.
oracle   soft   nproc    16384

# oracle-database-preinstall-19c setting for nproc hard limit is 16384
oracle   hard   nproc    16384

# oracle-database-preinstall-19c setting for stack soft limit is 10240KB
oracle   soft   stack    10240

# oracle-database-preinstall-19c setting for stack hard limit is 32768KB
oracle   hard   stack    32768

# oracle-database-preinstall-19c setting for memlock hard limit is maximum of 128GB on x86_64 or 3GB on x86 OR 90 % of RAM
oracle   hard   memlock    134217728

# oracle-database-preinstall-19c setting for memlock soft limit is maximum of 128GB on x86_64 or 3GB on x86 OR 90% of RAM
oracle   soft   memlock    134217728

# oracle-database-preinstall-19c setting for data soft limit is 'unlimited'
oracle   soft   data    unlimited

# oracle-database-preinstall-19c setting for data hard limit is 'unlimited'
oracle   hard   data    unlimited
  1. 检查进启动配置的变化
bash 复制代码 
diff /boot/grub2/grub.cfg /boot/grub2/grub.cfg-oracle-database-preinstall-19c.orabackup
设置"numa=off transparent_hugepage=never"关闭了透明大页和numa
<   set kernelopts="root=/dev/mapper/rl-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl-swap rd.lvm.lv=rl/root rd.lvm.lv=rl/swap rhgb quiet numa=off transparent_hugepage=never "
---
>   set kernelopts="root=/dev/mapper/rl-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl-swap rd.lvm.lv=rl/root rd.lvm.lv=rl/swap rhgb quiet "

注意：修改了内核参数，需要重新启动

  1. 验证创建用户和用户组
bash 复制代码 
groups oracle
oracle : oinstall dba oper backupdba dgdba kmdba racdba
id oracle
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba),54323(oper),54324(backupdba),54325(dgdba),54326(kmdba),54330(racdba)

从结果可见oracle属于7个组

  1. 验证透明大页是否关闭
bash 复制代码 
cat /sys/kernel/mm/transparent_hugepage/enabled
always madvise [never]
cat /sys/kernel/mm/transparent_hugepage/defrag
always defer defer+madvise [madvise] never
  1. 也可以查看安装日志
bash 复制代码 
cat /var/log/oracle-database-preinstall-19c/results/orakernel.log

安装Oracle RPM

bash 复制代码 
dnf install -y /mnt/oracle/19c/oracle-database-ee-19c-1.0-1.x86_64.rpm
Last metadata expiration check: 0:04:44 ago on Wed 17 Apr 2024 12:02:20 PM CST.
Dependencies resolved.
==========================================================================================================
 Package                                            Architecture      Version       Repository       Size
==========================================================================================================
Installing:
 oracle-database-ee-19c                             x86_64            1.0-1         @commandline    2.5 G

Transaction Summary
==========================================================================================================
Install  1 Package

Total size: 2.5 G
Installed size: 6.9 G
Downloading Packages:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                                                  1/1 
  Running scriptlet: oracle-database-ee-19c-1.0-1.x86_64                                              1/1 
  Installing       : oracle-database-ee-19c-1.0-1.x86_64                                              1/1 
  Running scriptlet: oracle-database-ee-19c-1.0-1.x86_64                                              1/1 
[INFO] Executing post installation scripts...
[INFO] Oracle home installed successfully and ready to be configured.
To configure a sample Oracle Database you can execute the following service configuration script as root: /etc/init.d/oracledb_ORCLCDB-19c configure

  Verifying        : oracle-database-ee-19c-1.0-1.x86_64                                                                                                             1/1 

Installed:
  oracle-database-ee-19c-1.0-1.x86_64                                                                                                                                    

Complete!

禁用CDB

bash 复制代码 
vi /etc/init.d/oracledb_ORCLCDB-19c
...
export ORACLE_HOME=/opt/oracle/product/19c/dbhome_1

export ORACLE_VERSION=19c
export ORACLE_SID=ORCLCDB
export TEMPLATE_NAME=General_Purpose.dbc
export CHARSET=AL32UTF8
export PDB_NAME=ORCLPDB1
export LISTENER_NAME=LISTENER
export NUMBER_OF_PDBS=1
export CREATE_AS_CDB=true
修改为
export CREATE_AS_CDB=false

初始化数据库

bash 复制代码 
[root@oracle19c ansible]# /etc/init.d/oracledb_ORCLCDB-19c configure
Configuring Oracle Database ORCLCDB.
Prepare for db operation
10% complete
Copying database files
40% complete
Creating and starting Oracle instance
42% complete
46% complete
50% complete
54% complete
60% complete
Completing Database Creation
66% complete
70% complete
Executing Post Configuration Actions
100% complete
Database creation complete. For details check the logfiles at:
 /opt/oracle/cfgtoollogs/dbca/ORCLCDB.
Database Information:
Global Database Name:ORCLCDB
System Identifier(SID):ORCLCDB
Look at the log file "/opt/oracle/cfgtoollogs/dbca/ORCLCDB/ORCLCDB.log" for further details.

Database configuration completed successfully. The passwords were auto generated, you must change them by connecting to the database using 'sqlplus / as sysdba' as the oracle user.

可以查看详细一点儿的日志（输出了时间）

bash 复制代码 
cat /opt/oracle/cfgtoollogs/dbca/ORCLCDB/ORCLCDB.log

本次初始化耗时6分钟，对比没有禁用CDB的一次实验，初始化耗时15分钟

修改oracle用户的环境变量

bash 复制代码 
su - oracle
vi .bashrc
# 在原文件最后增加
umask 022
export TMP=/tmp
export TMPDIR=$TMP
export NLS_LANG=AMERICAN_AMERICA.AL32UTF8
export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=$ORACLE_BASE/product/19c/dbhome_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export ORACLE_SID=ORCLCDB
export PATH=$ORACLE_HOME/bin:$PATH

小技巧：修改.bashrc 而不是.bash_profile的原因是可以支持非登录模式执行shell

验证基本功能

返回root重新以oracle用户执行

bash 复制代码 
su - oracle
[oracle@oracle19c ~]$ sqlplus / as sysdba
SQL*Plus: Release 19.0.0.0.0 - Production on Thu Apr 18 17:23:03 2024
Version 19.3.0.0.0
Copyright (c) 1982, 2019, Oracle.  All rights reserved.
Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0

SQL> create table t1(a int primary key,b varchar(16));
Table created.
SQL> insert into t1 values(100,'beijing');
1 row created.
SQL> insert into t1 values(200,'天津');
1 row created.
SQL> select * from t1 order by a desc;
         A B
---------- ----------------
       200 天津
       100 beijing

重新启动系统后，发现服务不会自动重启

采用RPM安装并没有设置自动重新启动Oracle的服务，运行 sqlplus / as sysdba 执行简单SQL报错，信息如下：

bash 复制代码 
[oracle@oracle19c ~]$ sqlplus / as sysdba

SQL*Plus: Release 19.0.0.0.0 - Production on Thu Apr 18 22:59:25 2024
Version 19.3.0.0.0
Copyright (c) 1982, 2019, Oracle.  All rights reserved.
Connected to an idle instance.

SQL> select * from t1 ;
select * from t1
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0

所以要手工增加自动重启的服务，此处主要参考ORACLE 19C 在centos 7的本地rpm包安装及调试，个别地方稍作修正

  • 设置公共环境变量文件
bash 复制代码 
vi /etc/sysconfig/ORCLCDB.oracledb
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/19c/dbhome_1
ORACLE_SID=ORCLCDB
  • 创建监听服务
bash 复制代码 
vi /usr/lib/systemd/system/ORCLCDB@lsnrctl.service
[Unit]
Description=Oracle Net Listener
After=syslog.target network.target

[Service]
Type=forking
EnvironmentFile=/etc/sysconfig/ORCLCDB.oracledb
ExecStart=/opt/oracle/product/19c/dbhome_1/bin/lsnrctl start
ExecStop=/opt/oracle/product/19c/dbhome_1/bin/lsnrctl stop
User=oracle

[Install]
WantedBy=multi-user.target

  • 创建服务启动服务

    vi /usr/lib/systemd/system/ORCLCDB@oracledb.service
    [Unit]
    Description=Oracle Database service
    After=syslog.target network.target lsnrctl.service

    [Service]
    Type=forking
    EnvironmentFile=/etc/sysconfig/ORCLCDB.oracledb
    ExecStart=/opt/oracle/product/19c/dbhome_1/bin/dbstart $ORACLE_HOME
    ExecStop=/opt/oracle/product/19c/dbhome_1/bin/dbshut $ORACLE_HOME
    User=oracle

    [Install]
    WantedBy=multi-user.target

  • 设置启动

    vi /etc/oratab
    ...
    #ORCLCDB:/opt/oracle/product/19c/dbhome_1:N
    #将此处原来的N修改为Y
    ORCLCDB:/opt/oracle/product/19c/dbhome_1:Y

  • 激活服务

    systemctl enable ORCLCDB@lsnrctl

    systemctl enable ORCLCDB@oracledb

  • 小技巧，先不忙着启动系统，先手工启动服务进行验证

bash 复制代码 
systemctl start ORCLCDB@lsnrctl
systemctl start ORCLCDB@oracledb

如果有错误信息，则通过 systemctl status ORCLCDB@lsnrctl 分析问题

  • 重启后检验服务状态
bash 复制代码 
[root@oracle19c ansible]# netstat -tunlp | grep -E '1521|5500'
tcp6       0      0 :::5500                 :::*                    LISTEN      1090/tnslsnr        
tcp6       0      0 :::1521                 :::*                    LISTEN      1090/tnslsnr        
[root@oracle19c ansible]# su - oracle
[oracle@oracle19c ~]$ sqlplus / as sysdba
SQL*Plus: Release 19.0.0.0.0 - Production on Thu Apr 18 23:21:52 2024
Version 19.3.0.0.0
Copyright (c) 1982, 2019, Oracle.  All rights reserved.
Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0

SQL> select * from t2 ;
         A B
---------- ----------------
       100 beijing
       200 天津

总结

本文的内容主要来自网络，但是经过了本人多次的验证和整理，剔除了一些不必要的环节，也为大家跳过了一些坑。如果有不足之处，请不吝指正，我一定及时修改更新。

1、RPM安装的限制

  1. 仅用于安装 Oracle 数据库软件，RAC不能这样安装，并且扣除preinstallation，安装rpm的难度与静默安装相当。
  2. RPM 只能用于安装软件，而不能用于更新软件
  3. 无法控制软件安装的目录，即不一定能满足企业安装规范的目录约束
  4. 推荐仅用于实验环境，不要用于生产环境

2、一些坑（网上个别文档有些笔误）

  1. 19C 缺省在/etc/init.d/oracledb_ORCLCDB-19c 设置了字符集为AL32UTF8，无需在其他地方设置服务器字符集
  2. /etc/hosts 一定要设置正确，但是无需删除127.0.0.1，::1 那两行
  3. 预安装RPM准备的内容见"验证预安装RPM的工作成果"部分，这些工作都不需要手工执行
相关推荐
潇潇和多客开源1 小时前
数据库的数据被清除了，该如何恢复？
数据库·oracle
胖头鱼的鱼缸（尹海文）1 小时前
数据库管理-第274期 Oracle Enterprise Manager 24ai新特性一览（20241223）
数据库·oracle
百度智能云技术站15 小时前
广告投放系统成本降低 70%+，基于 Redis 容量型数据库 PegaDB 的方案设计和业务实践
数据库·redis·oracle
梦想平凡16 小时前
PHP 微信棋牌开发全解析：高级教程
android·数据库·oracle
夏木~18 小时前
Oracle 中什么情况下 可以使用 EXISTS 替代 IN 提高查询效率
数据库·oracle
吴冰_hogan19 小时前
MySQL InnoDB 存储引擎 Redo Log（重做日志）详解
数据库·oracle
CodeCraft Studio20 小时前
【实用技能】如何在 SQL Server 中处理 Null 或空值？
数据库·oracle·sqlserver
武汉联从信息20 小时前
浅谈ORACLE中间件SOA BPM,IDM,OID,UCM,WebcenterPortal服务器如何做迁移切换
oracle
Elastic 中国社区官方博客21 小时前
Elasticsearch：什么是查询语言？
大数据·数据库·elasticsearch·搜索引擎·oracle
夜光小兔纸1 天前
oracle dblink 的创建及使用
数据库·oracle
热门推荐
01〔AI 绘画〕Stable Diffusion 之 解决绘制多人或面部很小的人物时面部崩坏问题 篇02ARM学习（31）编译器对overlay方式的支持03玄机平台应急响应—webshell查杀04解决java读取EXCEL数据变成科学计数法的问题05校验 GPT-4 真实性的三个经典问题：快速区分 GPT-3.5 与 GPT-4，并提供免费测试网站06Docker 夺命连环 15 问07DisplayPort AltMode On Type-c协议_Ver2.0(学习笔记)08基于大语言模型（LLM）的合成数据生成、策展和评估的综述09(欧拉)openEuler系统添加网卡文件配置流程、(欧拉)openEuler系统手动配置ipv6地址流程、(欧拉)openEuler系统网络管理说明106个主流的工业3D管道设计软件