HCIA静态路由综合实验（eNSP)

Zombie_QP2023-07-27 21:48

实验题目及要求：

1、分析IP地址分配。

主干IP掩码均为30；

环回IP掩码为28，方便汇总掩码27；

然后预留部分IP地址。

如下图：

2、按如上图片要求连接设备，并标记好IP分配信息，便于命令配置时一目了然。
3、进入各路由器VRP界面开始命令配置，配置IP地址命令如下（含解析）：

R1：

bash 复制代码 
<Huawei>sys			//进入第二层
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1 			//将路由器改名为r1
[r1]int g 0/0/0			//进入接口，按之前信息标注开始配置IP地址
[r1-GigabitEthernet0/0/0]ip add 192.168.1.21 30
Jul 21 2023 10:14:33-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]q
[r1]int g 0/0/1
[r1-GigabitEthernet0/0/1]ip add 192.168.1.17 30
Jul 21 2023 10:15:20-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]q
[r1]int LoopBack 0			//进入环回接口
[r1-LoopBack0]ip add 192.168.1.145 28				//给环回接口配置IP地址，将环回接口模拟成一台pc
[r1-LoopBack0]q
[r1]int loopb 1
[r1-LoopBack1]ip add 192.168.1.129 28
[r1-LoopBack1]q

R2：

bash 复制代码 
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.1.22 30
Jul 21 2023 10:19:12-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]q
[r2]int g 0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.9 30
Jul 21 2023 10:19:34-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]q
[r2]int loopb 0
[r2-LoopBack0]ip add 192.168.1.81 28
[r2-LoopBack0]q
[r2]int loopb 1
[r2-LoopBack1]ip add 192.168.1.165 28
[r2-LoopBack1]q

R3：

bash 复制代码 
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r3
[r3]int g 0/0/0
[r3-GigabitEthernet0/0/0]ip add 192.168.1.18 30
Jul 21 2023 10:21:58-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]q
[r3]int g 0/0/1
[r3-GigabitEthernet0/0/1]ip add 192.168.1.13 30
Jul 21 2023 10:22:24-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]q
[r3]int loopb 0
[r3-LoopBack0]ip add 192.168.1.97 28
[r3-LoopBack0]q
[r3]int loopb 1
[r3-LoopBack1]ip add 192.168.1.113 28

R4：

bash 复制代码 
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]int g 0/0/0
[r4-GigabitEthernet0/0/0]ip add 192.168.1.14 30
Jul 21 2023 10:26:37-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]q
[r4]int g 0/0/1
[r4-GigabitEthernet0/0/1]ip add 192.168.1.10 30
Jul 21 2023 10:26:59-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]q
[r4]int g 0/0/2
[r4-GigabitEthernet0/0/2]ip add 192.168.1.2 30
Jul 21 2023 10:27:23-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r4-GigabitEthernet0/0/2]q
[r4]int g 4/0/0
[r4-GigabitEthernet4/0/0]ip add 192.168.1.5 30
Jul 21 2023 10:27:48-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet4/0/0 has entered the UP state. 
[r4-GigabitEthernet4/0/0]q
[r4]int loopb 0
[r4-LoopBack0]ip add 192.168.1.33 28
[r4-LoopBack0]q
[r4]int loopb 1
[r4-LoopBack1]ip add 192.168.1.49 28
[r4-LoopBack1]

R5：

bash 复制代码 
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r5
[r5]int g 0/0/0
[r5-GigabitEthernet0/0/0]ip add 192.168.1.1 30 			//模拟为1000兆接口
Jul 21 2023 10:29:53-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r5-GigabitEthernet0/0/0]q
[r5]int g 0/0/1
[r5-GigabitEthernet0/0/1]ip add 192.168.1.6 30				//模拟为100兆接口
Jul 21 2023 10:30:19-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r5-GigabitEthernet0/0/1]q
[r5]int loopb0
[r5-LoopBack0]ip add 5.5.5.5 24
4、给各路由配空接口防环路由、缺省路由，同时配置静态路由。

R1：

bash 复制代码 
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ip route-static 192.168.1.128 27 null 0				//空接口防环路由
[r1]ip route-static 0.0.0.0 0.0.0.0 192.168.1.22			//配置缺省路由
[r1]ip route-static 0.0.0.0 0.0.0.0 192.168.1.18
[r1]ip route- 192.168.1.8 30 192.168.1.22				//配置静态路由
[r1]ip route- 192.168.1.12 30 192.168.1.18
[r1]ip route- 192.168.1.0 30 191.168.1.20
[r1]ip route- 192.168.1.4 30 191.168.1.20
[r1]ip route- 192.168.1.0 30 191.168.1.16
[r1]ip route- 192.168.1.4 30 191.168.1.16

R2:

bash 复制代码 
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ip route-static 192.168.1.64 27 null 0
[r2]ip route-static 0.0.0.0 0.0.0.0 192.168.1.10		
[r2]ip route-static 192.168.1.128 27 192.168.1.21
[r2]ip route- 192.168.1.0 30 192.168.1.10
[r2]ip route- 192.168.1.4 30 192.168.1.10
[r2]ip route- 192.168.1.12 30 192.168.1.1
[r2]ip route- 192.168.1.96 27 192.168.1.10
[r2]ip route- 192.168.1.96 27 192.168.1.21
[r2]ip route- 192.168.1.16 30 192.168.1.21
[r2]ip route- 192.168.1.32 27 192.168.1.10

R3:

bash 复制代码 
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]ip route-static 192.168.1.96 27 null 0
[r3]ip route-static 0.0.0.0 0.0.0.0 192.168.1.14
[r3]ip route-static 192.168.1.128 27 192.168.1.17
[r3]ip route- 192.168.1.0 30 192.168.1.14
[r3]ip route- 192.168.1.4 30 192.168.1.14
[r3]ip route- 192.168.1.8 30 192.168.1.14
[r3]ip route- 192.168.1.32 27 192.168.1.14
[r3]ip route- 192.168.1.64 27 192.168.1.17
[r3]ip route- 192.168.1.20 30 192.168.1.17
[r3]ip route- 192.168.1.64 27 192.168.1.14

R4:

bash 复制代码 
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip route-static 192.168.1.32 27 null 0
[r4]ip route-static 0.0.0.0 0.0.0.0 192.168.1.1
[r4]ip route-static 0.0.0.0 0.0.0.0 192.168.1.6 preference 61
[r4]ip route-static 192.168.1.64 27 192.168.1.9
[r4]ip route-static 192.168.1.96 27 192.168.1.13
[r4]ip route-static 192.168.1.128 27 192.168.1.13
[r4]ip route-static 192.168.1.128 27 192.168.1.9
[r4]ip route- 192.168.1.20 30 192.168.1.9
[r4]ip route- 192.168.1.16 30 192.168.1.13

R5:

bash 复制代码 
[r5]ip route-static 192.168.1.32 27 192.168.1.2
[r5]ip route-static 192.168.1.64 27 192.168.1.2
[r5]ip route-static 192.168.1.128 27 192.168.1.2
[r5]ip route-static 192.168.1.8 30 192.168.1.2
[r5]ip route-static 192.168.1.20 30 192.168.1.2
[r5]ip route-static 192.168.1.12 30 192.168.1.2
[r5]ip route-static 192.168.1.16 30 192.168.1.2
[r5]ip route-static 192.168.1.96 27 192.168.1.2
[r5]ip route-static 192.168.1.128 27 192.168.1.5 preference 61
[r5]ip route-static 192.168.1.96 27 192.168.1.5 preference 61
[r5]ip route-static 192.168.1.16 30 192.168.1.5 preference 61
[r5]ip route-static 192.168.1.12 30 192.168.1.5 preference 61
[r5]ip route-static 192.168.1.8 30 192.168.1.5  preference 61
[r5]ip route-static 192.168.1.20 30 192.168.1.5 preference 61
[r5]ip route-static 192.168.1.64 27 192.168.1.5  preference 61
[r5]ip route-static 192.168.1.32 27 192.168.1.5 preference 61
以上操作基本就把该实验完成了，最后验证就需要断开R4的0/0/2口进行测试、然后利用R1来ping
bash 复制代码 
< r1>ping 5.5.5.5
PING 5.5.5.5: 56 data bytes, press CTRL_C to break
Request time out
Reply from 5.5.5.5: bytes=56 Sequence=2 ttl=253 time=50 ms
Reply from 5.5.5.5: bytes=56 Sequence=3 ttl=253 time=50 ms
Reply from 5.5.5.5: bytes=56 Sequence=4 ttl=253 time=30 ms
Reply from 5.5.5.5: bytes=56 Sequence=5 ttl=253 time=30 ms
--- 5.5.5.5 ping statistics ---
5 packet(s) transmitted
4 packet(s) received
20.00% packet loss
round-trip min/avg/max = 30/40/50 ms

成功！

相关推荐
星夜夏空991 小时前
网络编程（1）
服务器·网络
上海云盾-小余1 小时前
中小站点防护避坑：低价高防服务存在的各类安全短板剖析
网络·爬虫·安全·ddos
数据知道4 小时前
邮件安全实战：SPF/DKIM/DMARC 配置与钓鱼绕过
网络·安全·web安全·网络安全·邮件安全
王莎莎-MinerU4 小时前
MCP 解决的是工具接入，科研 Agent 还缺的是科学证据接口标准化
开发语言·网络·人工智能·深度学习·pdf·c#·php
Chloeis Syntax5 小时前
JAVAEE初阶 --- 构造HTTP请求
网络·网络协议·http·postman
砚凝霜5 小时前
软考网络工程师｜第 1 章 计算机网络基础 完整备考笔记
网络·笔记·计算机网络
rcms152702692185 小时前
NIKON 4S019-394 接口模块
网络
某不知名網友6 小时前
Linux Socket 编程完整讲解
网络
ICT系统集成阿祥6 小时前
不用复杂命令，快速定位二层 / 三层网络故障
网络·网络排查·二层故障·三层故障
CHANG_THE_WORLD6 小时前
1.简单的服务端和客户端（仅作为内容补充）
linux·服务器·网络
热门推荐
012026年7月AI圈大地震：GPT-5.6被政府限制、Claude入驻Slack、Anthropic自研芯片02GitHub 镜像站点03如何新建文件夹？ 电脑新建文件夹的4种方法04AI科技热点日报 | 2026年07月01日05幻兽帕鲁 - 服务器管理员权限与 GM 命令完全指南06国内可直接用、免费额度/永久免费的大模型API清单（含 SiliconFlow、火山、阿里、智谱、百度、Kimi、DeepSeek、DMXAPI 等）07【AI前线观察】2026年国产开源大模型全面横评：从 DeepSeek V4 到 Kimi K3，谁才是开发者的最优选择？08AI 编程 IDE 全景解析 2026：Agent 全面接管开发链路092026 年 AI 大模型 & AI 编程工具实战全总结102026 国产 AI 大模型横评：DeepSeek、通义千问、Kimi、文心一言、星火、豆包谁更能打？