Black群晖VideoStation不支持音频 DTS\EAC3\TureHD的解决办法

前几天自己手贱,更新了VideoStation,更新完又回到不支持 DTS格式的情况,之前修复的方法又没做笔记,所以这次把笔记做好,防止下次!

1、安装或更新完VideoStation后,接着安装ffmpeg(我安装的是4.4.4.49),再安装Media Extensions;

2、停用VideoStation;

3、到控制面板里面打开ssh;

4、用电脑ssh远程连接到群晖上;

5、获取su权限sudo -i,输入后回车再输一次密码;

6、依次执行以下命令:如果第二条命令执行失败,请看完解决办法后再继续执行下面的几条命令。

bash 复制代码
#重名备份ffmpeg41为ffmpeg41.orig
mv /var/packages/CodecPack/target/pack/bin/ffmpeg41 /var/packages/CodecPack/target/pack/bin/ffmpeg41.orig
# 这里可能因为无法访问 github 失败,下面又解决办法,请看完再继续下面的命令
wget -O - https://raw.githubusercontent.com/Rootjhon/Synology_Enhance/main/VideoStation/DSM7_1/ffmpeg41-wrapper > /var/packages/CodecPack/target/pack/bin/ffmpeg41
#修改ffmpeg41 权限
chmod 755 /var/packages/CodecPack/target/pack/bin/ffmpeg41
#重名备份libsynovte.so 为libsynovte.so.orig
cp -n /var/packages/VideoStation/target/lib/libsynovte.so /var/packages/VideoStation/target/lib/libsynovte.so.orig
#修改libsynovte.so.orig的用户组权限
chown VideoStation:VideoStation /var/packages/VideoStation/target/lib/libsynovte.so.orig
#设置解码
sudo sed -i -e 's/eac3/3cae/' -e 's/dts/std/' -e 's/truehd/dheurt/' /var/packages/VideoStation/target/lib/libsynovte.so
#重启VideoStation
sudo synopkg restart VideoStation

好了,如果你顺利执行上面的命令,那恭喜你,应该解决了。如果第二条命令执行失败,往下看。

现在说说第二条命令,这条命令是把https://raw.githubusercontent.com/Rootjhon/Synology_Enhance/main/VideoStation/DSM7_1/ffmpeg41-wrapper脚本下载到/var/packages/CodecPack/target/pack/bin/并命名为ffmpeg41。由于git被墙了,除非有梯子,要不然没办法。哈哈~~不过我已经把上面的脚本下载下来了,继续往下看怎么解决。

1、在/var/packages/CodecPack/target/pack/bin/下创建ffmpeg41,执行下面命令:

bash 复制代码
vim /var/packages/CodecPack/target/pack/bin/ffmpeg41

2、复制下面代码,粘贴上去:

bash 复制代码
#!/bin/bash

# Fork from code of BenjaminPoncet rev.12 with some revisions and little fixes.
rev="AME_12.3.1"

_log(){
	echo "$(date '+%Y-%m-%d %H:%M:%S') - ${streamid} - $1" >> /tmp/ffmpeg.log
}

_log_para(){
	echo "$1" | fold -w 120 | sed "s/^.*$/$(date '+%Y-%m-%d %H:%M:%S') - ${streamid} -          = &/" >> /tmp/ffmpeg.log
}

_term(){
	rm /tmp/ffmpeg-${streamid}.stderr
	_log "*** KILLCHILD ***"
	kill -TERM "$childpid" 2>/dev/null
}

trap _term SIGTERM

arch=`uname -a | sed 's/.*synology_//' | cut -d '_' -f 1`
nas=`uname -a | sed 's/.*synology_//' | cut -d '_' -f 2`
pid=$$
paramvs=$@
stream="${@: -1}"
streamid="FFM$pid"
bin1=/var/packages/CodecPack/target/pack/bin/ffmpeg41.orig
bin2=/var/packages/ffmpeg/target/bin/ffmpeg
args=()

vcodec="KO"

while [[ $# -gt 0 ]]
do
case "$1" in
	-i)
		shift
		movie="$1"
		args+=("-i" "$1")
	;;
	-hwaccel)
		shift
		hwaccel="$1"
		args+=("-hwaccel" "$1")
	;;
	-scodec)
		shift
		scodec="$1"
		args+=("-scodec" "$1")
	;;
	-f)
		shift
		fcodec="$1"
		args+=("-f" "$1")
	;;
	-map)
		shift
		args+=("-map" "$1")
		idmap=`echo $1 | cut -d : -f 2`
		if [ "$vcodec" = "KO" ]; then
			vcodec=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=codec_name -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1`
			vcodecprofile=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=profile -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1`
		else
			acodec=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=codec_name -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1`
		fi
	;;
	*)
		args+=("$1")
	;;
esac
shift
done

_log "*** PROCESS START REV $rev DS$nas ($arch) PID $pid ***"

_log "MOVIE    = $movie"

set -- "${args[@]}"

argsnew=()
args1sv=()
args2sv=()
args1vs=()
args2vs=()

while [[ $# -gt 0 ]]
do
case "$1" in
	-ss)
		shift
		argsnew+=("-ss" "$1")
		args1sv+=("-ss" "$1")
		args1sv+=("-noaccurate_seek")
		args1vs+=("-ss" "$1")
		args1vs+=("-noaccurate_seek")
		args2sv+=("-analyzeduration" "10000000")
		args2vs+=("-analyzeduration" "10000000")
	;;
	-i)
		shift
		argsnew+=("-i" "$1")
		args1sv+=("-i" "$1")
		args2sv+=("-i" "pipe:0" "-map" "0")
		args1vs+=("-i" "$1")
		args2vs+=("-i" "pipe:0" "-map" "0")
	;;
	-vf)
		shift
		if [ "$hwaccel" = "vaapi" ] && [ "$vcodecprofile" = "Main 10" ]; then
			scale_w=`echo "${1}" | sed -e 's/.*=w=//g' | sed -e 's/:h=.*//g'`
			scale_h=`echo "${1}" | sed -e 's/.*:h=//g'`
			if let ${scale_w} AND let ${scale_h}; then
				argsnew+=("-vf" "scale_vaapi=w=${scale_w}:h=${scale_h}:format=nv12,hwupload,setsar=sar=1")
			else
				argsnew+=("-vf" "scale_vaapi=format=nv12,hwupload,setsar=sar=1")
			fi
		else
			argsnew+=("-vf" "$1")
		fi
		args2sv+=("-vf" "$1")
		args1vs+=("-vf" "$1")
	;;
	# Para activar los límites de Bitrate que trae el VideoStation. Si se quieren fijar siempre a un valor, cambiar el $1 y poner 8M por ejemplo.
	-vb)
    		shift
		argsnew+=("-vb" "$1")
		args1sv+=("-vb" "$1")
		args2sv+=("-vb" "$1")
		args1vs+=("-vb" "$1")
		args2vs+=("-vb" "$1")
	;;
	-vcodec)
		shift
		argsnew+=("-vcodec" "$1")
		args1sv+=("-vcodec" "copy")
		args2sv+=("-vcodec" "$1")
		args1vs+=("-vcodec" "$1")
		args2vs+=("-vcodec" "copy")
	;;
	-acodec)
		shift
		if [ "$1" = "libfaac" ]; then
			argsnew+=("-acodec" "aac")
			args1sv+=("-acodec" "aac")
			args2vs+=("-acodec" "aac")
		else
			argsnew+=("-acodec" "$1")
			args1sv+=("-acodec" "$1")
			args2vs+=("-acodec" "$1")
		fi
		args2sv+=("-acodec" "copy")
		args1vs+=("-acodec" "copy")
	;;
	-ab)
		shift
		argsnew+=("-ab" "$1")
		args1sv+=("-ab" "$1")
		args2vs+=("-ab" "$1")
	;;
	-ac)
		shift
		argsnew+=("-ac" "$1")
		args1sv+=("-ac" "$1")
		args2vs+=("-ac" "$1")
	;;
	-f)
		shift
		argsnew+=("-f" "$1")
		args1sv+=("-f" "mpegts")
		args2sv+=("-f" "$1")
		args1vs+=("-f" "mpegts")
		args2vs+=("-f" "$1")
	;;
	-segment_format)
		shift
		argsnew+=("-segment_format" "$1")
		args2vs+=("-segment_format" "$1")
		args2sv+=("-segment_format" "$1")
	;;
	-segment_list_type)
		shift
		argsnew+=("-segment_list_type" "$1")
		args2vs+=("-segment_list_type" "$1")
		args2sv+=("-segment_list_type" "$1")
	;;
	-hls_seek_time)
		shift
		argsnew+=("-hls_seek_time" "$1")
		args2vs+=("-hls_seek_time" "$1")
		args2sv+=("-hls_seek_time" "$1")
	;;
	-segment_time)
		shift
		argsnew+=("-segment_time" "$1")
		args2vs+=("-segment_time" "$1")
		args2sv+=("-segment_time" "$1")
	;;
	-segment_time_delta)
		shift
		argsnew+=("-segment_time_delta" "$1")
		args2vs+=("-segment_time_delta" "$1")
		args2sv+=("-segment_time_delta" "$1")
	;;
	-segment_start_number)
		shift
		argsnew+=("-segment_start_number" "$1")
		args2vs+=("-segment_start_number" "$1")
		args2sv+=("-segment_start_number" "$1")
	;;
	-individual_header_trailer)
		shift
		argsnew+=("-individual_header_trailer" "$1")
		args2vs+=("-individual_header_trailer" "$1")
		args2sv+=("-individual_header_trailer" "$1")
	;;
	-avoid_negative_ts)
		shift
		argsnew+=("-avoid_negative_ts" "$1")
		args2vs+=("-avoid_negative_ts" "$1")
		args2sv+=("-avoid_negative_ts" "$1")
	;;
	-break_non_keyframes)
		shift
		argsnew+=("-break_non_keyframes" "$1")
		args2vs+=("-break_non_keyframes" "$1")
		args2sv+=("-break_non_keyframes" "$1")
	;;
	-max_muxing_queue_size)
		shift
		args2vs+=("-max_muxing_queue_size" "$1")
		args2sv+=("-max_muxing_queue_size" "$1")
	;;
	-map)
		shift
		argsnew+=("-map" "$1")
		args1sv+=("-map" "$1")
		args1vs+=("-map" "$1")
	;;
	*)
		argsnew+=("$1")
		if [ "$stream" = "$1" ]; then
			args1sv+=("-bufsize" "8192k" "pipe:1")
			args2sv+=("$1")
			args1vs+=("-bufsize" "8192k" "pipe:1")
			args2vs+=("$1")
		else
			args2sv+=("$1")
			args1vs+=("$1")
			args2vs+=("$1")
		fi
	;;
esac
shift
done

sed -i -e "s/{\"PID\":${pid},\"hardware_transcode\":true,/{\"PID\":${pid},\"hardware_transcode\":false,/" /tmp/VideoStation/enabled

startexectime=`date +%s`

if [ "$scodec" = "subrip" ]; then	

	_log "FFMPEG   = $bin1"
	_log "CODEC    = $scodec"
	_log "PARAMVS  ="
	_log_para "$paramvs"
	
	$bin1 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

elif [ "$fcodec" = "mjpeg" ]; then	

	_log "FFMPEG   = $bin1"
	_log "CODEC    = $fcodec"
	_log "PARAMVS  ="
	_log_para "$paramvs"
	
	$bin1 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

else

	_log "VCODEC   = $vcodec ($vcodecprofile)"
	_log "ACODEC   = $acodec"
	_log "PARAMVS  ="
	_log_para "$paramvs"
	_log "MODE     = ORIG"
	_log "FFMPEG   = $bin1"
	_log "PARAMWP  ="
	param1=${argsnew[@]}
	_log_para "$param1"

	$bin1 "${argsnew[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

fi

childpid=$!
_log "CHILDPID = $childpid"
wait $childpid

if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then

	_log "*** CHILD END ***"
	startexectime=`date +%s`
	_log "STDOUT   ="
	_log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`"
	# _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`"
	_log "MODE     = PIPE V_ORIG-A_WRAP"
	_log "FFMPEG1  = $bin1"
	_log "FFMPEG2  = $bin2"
	_log "PARAM1   ="
	param1=${args1vs[@]}
	_log_para "$param1"
	_log "PARAM2   ="
	param2=${args2vs[@]}
	_log_para "$param2"

	$bin1 "${args1vs[@]}" | $bin2 "${args2vs[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

	childpid=$!
	_log "CHILDPID = $childpid"
	wait $childpid

fi

if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then

	_log "*** CHILD END ***"
	startexectime=`date +%s`
	_log "STDOUT   ="
	_log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`"
	# _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`"
	_log "MODE     = PIPE V_WRAP-A_ORIG"
	_log "FFMPEG1  = $bin2"
	_log "FFMPEG2  = $bin1"
	_log "PARAM1   ="
	param1=${args1sv[@]}
	_log_para "$param1"
	_log "PARAM2   ="
	param2=${args2sv[@]}
	_log_para "$param2"

	$bin2 "${args1sv[@]}" | $bin1 "${args2sv[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

	childpid=$!
	_log "CHILDPID = $childpid"
	wait $childpid

fi

if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then

	_log "*** CHILD END ***"
	startexectime=`date +%s`
	_log "STDOUT   ="
	_log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`"
	# _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`"
	_log "MODE     = WRAPPER"
	_log "FFMPEG   = $bin2"

	$bin2 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr &

	childpid=$!
	_log "CHILDPID = $childpid"
	wait $childpid

fi

stopexectime=`date +%s`
if test $((stopexectime-startexectime)) -lt 10; then
	_log "STDOUT   ="
	_log_para "`tail -n 22 /tmp/ffmpeg-${streamid}.stderr`"
	# _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`"
fi

_log "*** CHILD END ***"
_log "*** PROCESS END ***"

rm /tmp/ffmpeg-*.stderr

3、按esc键退出编辑模式,输入:wq保存退出,然后继续上面的命令完成即可。

收工!

相关推荐
我喜欢就喜欢8 小时前
基于qt vs下的视频播放
开发语言·qt·音视频
安步当歌9 小时前
【WebRTC】视频采集模块中各个类的简单分析
音视频·webrtc·视频编解码·video-codec
EasyGBS10 小时前
国标GB28181公网直播EasyGBS国标GB28181软件管理解决方案
大数据·网络·音视频·媒体·视频监控·gb28181
杨浦老苏13 小时前
Docker可视化管理面板DPanel的安装
运维·docker·群晖
Johnstons13 小时前
AnaTraf | 网络性能监控系统保障音视频质量的秘籍
网络·音视频·网络流量监控·网络流量分析·npmd
lrlianmengba13 小时前
推荐一款非常好用的视频编辑软件:Movavi Video Editor Plus
音视频
SZ17011023113 小时前
ffplay 实现视频流中音频的延迟
音视频·延迟
LNTON羚通14 小时前
CPU算法分析LiteAIServer视频智能分析平台视频智能分析:抖动、过亮与过暗检测技术
大数据·目标检测·音视频·视频监控
MediaTea16 小时前
Pr 视频过渡:沉浸式视频 - VR 光线
音视频·vr
几何心凉20 小时前
视频自动播放被浏览器阻止及其解决方案
音视频