Openstack（T）部署ceph集群 ceph-14.2.22-nautilus

请注意这个女生叫小美2024-04-09 20:12

https://www.cnblogs.com/liugp/p/12513702.html

我的部署参考上述文档，以下针对部署有不同的地方进行说明

1.节点的ceph源进行修改

复制代码

[Ceph]
name=Ceph packages for $basearch
baseurl=http://download.ceph.com/rpm-nautilus/el7/$basearch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc
priority=1

[Ceph-noarch]
name=Ceph noarch packages
baseurl=http://download.ceph.com/rpm-nautilus/el7/noarch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc
priority=1

[ceph-source]
name=Ceph source packages
baseurl=http://download.ceph.com/rpm-nautilus/el7/SRPMS
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc
priority=1

2.在所有节点安装ceph

将源命令安装mimic版本，修改为安装nautilus版本

修改前：ceph-deploy install --release mimic controller compute1 compute2

修改后：ceph-deploy install --release nautilus controller compute1 compute2

3. 【注意】创建monitor、配置admin key到各个节点，执行此命令需要到/etc/ceph/目录下去执行

4. 执行命令 ceph health

出现错误：HEALTH_WARN mon is allowing insecure global_id reclaim

复制代码

解决
[root@controller ~]# ceph config set mon auth_allow_insecure_global_id_reclaim false


检验
[root@controller ~]# ceph health
HEALTH_OK