FFmpeg常用API与示例(三)—— 音视频解码与编码

编解码层

1.解码

(1) 注册所有容器格式和 CODEC:av_register_all()

(2) 打开文件:av_open_input_file()

(3) 从文件中提取流信息:av_find_stream_info()

(4) 穷举所有的流,查找其中种类为 CODEC_TYPE_VIDEO

(5) 查找对应的解码器:avcodec_find_decoder()

(6) 打开编解码器:avcodec_open()

(7) 为解码帧分配内存:avcodec_alloc_frame()

(8) 不停地从码流中提取出帧数据:av_read_frame()

(9) 判断帧的类型,对于视频帧调用:avcodec_decode_video()

(10) 解码完后,释放解码器:avcodec_close()

(11) 关闭输入文件:av_close_input_file()

cpp 复制代码
/**
 * @file
 * Demuxing and decoding example.
 *
 * Show how to use the libavformat and libavcodec API to demux and
 * decode audio and video data.
 * @example demuxing_decoding.c
 */

#include <libavutil/imgutils.h>
#include <libavutil/samplefmt.h>
#include <libavutil/timestamp.h>
#include <libavformat/avformat.h>

static AVFormatContext *fmt_ctx = NULL;
static AVCodecContext *video_dec_ctx = NULL, *audio_dec_ctx;
static int width, height;
static enum AVPixelFormat pix_fmt;
static AVStream *video_stream = NULL, *audio_stream = NULL;
static const char *src_filename = NULL;
static const char *video_dst_filename = NULL;
static const char *audio_dst_filename = NULL;
static FILE *video_dst_file = NULL;
static FILE *audio_dst_file = NULL;

static uint8_t *video_dst_data[4] = {NULL};
static int      video_dst_linesize[4];
static int video_dst_bufsize;

static int video_stream_idx = -1, audio_stream_idx = -1;
static AVFrame *frame = NULL;
static AVPacket pkt;
static int video_frame_count = 0;
static int audio_frame_count = 0;

static int output_video_frame(AVFrame *frame)
{
    if (frame->width != width || frame->height != height ||
        frame->format != pix_fmt) {
        /* To handle this change, one could call av_image_alloc again and
         * decode the following frames into another rawvideo file. */
        fprintf(stderr, "Error: Width, height and pixel format have to be "
                "constant in a rawvideo file, but the width, height or "
                "pixel format of the input video changed:\n"
                "old: width = %d, height = %d, format = %s\n"
                "new: width = %d, height = %d, format = %s\n",
                width, height, av_get_pix_fmt_name(pix_fmt),
                frame->width, frame->height,
                av_get_pix_fmt_name(frame->format));
        return -1;
    }

    printf("video_frame n:%d coded_n:%d\n",
           video_frame_count++, frame->coded_picture_number);

    /* copy decoded frame to destination buffer:
     * this is required since rawvideo expects non aligned data */
    av_image_copy(video_dst_data, video_dst_linesize,
                  (const uint8_t **)(frame->data), frame->linesize,
                  pix_fmt, width, height);

    /* write to rawvideo file */
    fwrite(video_dst_data[0], 1, video_dst_bufsize, video_dst_file);
    return 0;
}

static int output_audio_frame(AVFrame *frame)
{
    size_t unpadded_linesize = frame->nb_samples * av_get_bytes_per_sample(frame->format);
    printf("audio_frame n:%d nb_samples:%d pts:%s\n",
           audio_frame_count++, frame->nb_samples,
           av_ts2timestr(frame->pts, &audio_dec_ctx->time_base));

    /* Write the raw audio data samples of the first plane. This works
     * fine for packed formats (e.g. AV_SAMPLE_FMT_S16). However,
     * most audio decoders output planar audio, which uses a separate
     * plane of audio samples for each channel (e.g. AV_SAMPLE_FMT_S16P).
     * In other words, this code will write only the first audio channel
     * in these cases.
     * You should use libswresample or libavfilter to convert the frame
     * to packed data. */
    fwrite(frame->extended_data[0], 1, unpadded_linesize, audio_dst_file);

    return 0;
}

static int decode_packet(AVCodecContext *dec, const AVPacket *pkt)
{
    int ret = 0;

    // submit the packet to the decoder
    ret = avcodec_send_packet(dec, pkt);
    if (ret < 0) {
        fprintf(stderr, "Error submitting a packet for decoding (%s)\n", av_err2str(ret));
        return ret;
    }

    // get all the available frames from the decoder
    while (ret >= 0) {
        ret = avcodec_receive_frame(dec, frame);
        if (ret < 0) {
            // those two return values are special and mean there is no output
            // frame available, but there were no errors during decoding
            if (ret == AVERROR_EOF || ret == AVERROR(EAGAIN))
                return 0;

            fprintf(stderr, "Error during decoding (%s)\n", av_err2str(ret));
            return ret;
        }

        // write the frame data to output file
        if (dec->codec->type == AVMEDIA_TYPE_VIDEO)
            ret = output_video_frame(frame);
        else
            ret = output_audio_frame(frame);

        av_frame_unref(frame);
        if (ret < 0)
            return ret;
    }

    return 0;
}

static int open_codec_context(int *stream_idx,
                              AVCodecContext **dec_ctx, AVFormatContext *fmt_ctx, enum AVMediaType type)
{
    int ret, stream_index;
    AVStream *st;
    AVCodec *dec = NULL;
    AVDictionary *opts = NULL;

    ret = av_find_best_stream(fmt_ctx, type, -1, -1, NULL, 0);
    if (ret < 0) {
        fprintf(stderr, "Could not find %s stream in input file '%s'\n",
                av_get_media_type_string(type), src_filename);
        return ret;
    } else {
        stream_index = ret;
        st = fmt_ctx->streams[stream_index];

        /* find decoder for the stream */
        dec = avcodec_find_decoder(st->codecpar->codec_id);
        if (!dec) {
            fprintf(stderr, "Failed to find %s codec\n",
                    av_get_media_type_string(type));
            return AVERROR(EINVAL);
        }

        /* Allocate a codec context for the decoder */
        *dec_ctx = avcodec_alloc_context3(dec);
        if (!*dec_ctx) {
            fprintf(stderr, "Failed to allocate the %s codec context\n",
                    av_get_media_type_string(type));
            return AVERROR(ENOMEM);
        }

        /* Copy codec parameters from input stream to output codec context */
        if ((ret = avcodec_parameters_to_context(*dec_ctx, st->codecpar)) < 0) {
            fprintf(stderr, "Failed to copy %s codec parameters to decoder context\n",
                    av_get_media_type_string(type));
            return ret;
        }

        /* Init the decoders */
        if ((ret = avcodec_open2(*dec_ctx, dec, &opts)) < 0) {
            fprintf(stderr, "Failed to open %s codec\n",
                    av_get_media_type_string(type));
            return ret;
        }
        *stream_idx = stream_index;
    }

    return 0;
}

static int get_format_from_sample_fmt(const char **fmt,
                                      enum AVSampleFormat sample_fmt)
{
    int i;
    struct sample_fmt_entry {
        enum AVSampleFormat sample_fmt; const char *fmt_be, *fmt_le;
    } sample_fmt_entries[] = {
        { AV_SAMPLE_FMT_U8,  "u8",    "u8"    },
        { AV_SAMPLE_FMT_S16, "s16be", "s16le" },
        { AV_SAMPLE_FMT_S32, "s32be", "s32le" },
        { AV_SAMPLE_FMT_FLT, "f32be", "f32le" },
        { AV_SAMPLE_FMT_DBL, "f64be", "f64le" },
    };
    *fmt = NULL;

    for (i = 0; i < FF_ARRAY_ELEMS(sample_fmt_entries); i++) {
        struct sample_fmt_entry *entry = &sample_fmt_entries[i];
        if (sample_fmt == entry->sample_fmt) {
            *fmt = AV_NE(entry->fmt_be, entry->fmt_le);
            return 0;
        }
    }

    fprintf(stderr,
            "sample format %s is not supported as output format\n",
            av_get_sample_fmt_name(sample_fmt));
    return -1;
}

int main (int argc, char **argv)
{
    int ret = 0;

    if (argc != 4) {
        fprintf(stderr, "usage: %s  input_file video_output_file audio_output_file\n"
                "API example program to show how to read frames from an input file.\n"
                "This program reads frames from a file, decodes them, and writes decoded\n"
                "video frames to a rawvideo file named video_output_file, and decoded\n"
                "audio frames to a rawaudio file named audio_output_file.\n",
                argv[0]);
        exit(1);
    }
    src_filename = argv[1];
    video_dst_filename = argv[2];
    audio_dst_filename = argv[3];

    /* open input file, and allocate format context */
    if (avformat_open_input(&fmt_ctx, src_filename, NULL, NULL) < 0) {
        fprintf(stderr, "Could not open source file %s\n", src_filename);
        exit(1);
    }

    /* retrieve stream information */
    if (avformat_find_stream_info(fmt_ctx, NULL) < 0) {
        fprintf(stderr, "Could not find stream information\n");
        exit(1);
    }

    if (open_codec_context(&video_stream_idx, &video_dec_ctx, fmt_ctx, AVMEDIA_TYPE_VIDEO) >= 0) {
        video_stream = fmt_ctx->streams[video_stream_idx];

        video_dst_file = fopen(video_dst_filename, "wb");
        if (!video_dst_file) {
            fprintf(stderr, "Could not open destination file %s\n", video_dst_filename);
            ret = 1;
            goto end;
        }

        /* allocate image where the decoded image will be put */
        width = video_dec_ctx->width;
        height = video_dec_ctx->height;
        pix_fmt = video_dec_ctx->pix_fmt;
        ret = av_image_alloc(video_dst_data, video_dst_linesize,
                             width, height, pix_fmt, 1);
        if (ret < 0) {
            fprintf(stderr, "Could not allocate raw video buffer\n");
            goto end;
        }
        video_dst_bufsize = ret;
    }

    if (open_codec_context(&audio_stream_idx, &audio_dec_ctx, fmt_ctx, AVMEDIA_TYPE_AUDIO) >= 0) {
        audio_stream = fmt_ctx->streams[audio_stream_idx];
        audio_dst_file = fopen(audio_dst_filename, "wb");
        if (!audio_dst_file) {
            fprintf(stderr, "Could not open destination file %s\n", audio_dst_filename);
            ret = 1;
            goto end;
        }
    }

    /* dump input information to stderr */
    av_dump_format(fmt_ctx, 0, src_filename, 0);

    if (!audio_stream && !video_stream) {
        fprintf(stderr, "Could not find audio or video stream in the input, aborting\n");
        ret = 1;
        goto end;
    }

    frame = av_frame_alloc();
    if (!frame) {
        fprintf(stderr, "Could not allocate frame\n");
        ret = AVERROR(ENOMEM);
        goto end;
    }

    /* initialize packet, set data to NULL, let the demuxer fill it */
    av_init_packet(&pkt);
    pkt.data = NULL;
    pkt.size = 0;

    if (video_stream)
        printf("Demuxing video from file '%s' into '%s'\n", src_filename, video_dst_filename);
    if (audio_stream)
        printf("Demuxing audio from file '%s' into '%s'\n", src_filename, audio_dst_filename);

    /* read frames from the file */
    while (av_read_frame(fmt_ctx, &pkt) >= 0) {
        // check if the packet belongs to a stream we are interested in, otherwise
        // skip it
        if (pkt.stream_index == video_stream_idx)
            ret = decode_packet(video_dec_ctx, &pkt);
        else if (pkt.stream_index == audio_stream_idx)
            ret = decode_packet(audio_dec_ctx, &pkt);
        av_packet_unref(&pkt);
        if (ret < 0)
            break;
    }

    /* flush the decoders */
    if (video_dec_ctx)
        decode_packet(video_dec_ctx, NULL);
    if (audio_dec_ctx)
        decode_packet(audio_dec_ctx, NULL);

    printf("Demuxing succeeded.\n");

    if (video_stream) {
        printf("Play the output video file with the command:\n"
               "ffplay -f rawvideo -pix_fmt %s -video_size %dx%d %s\n",
               av_get_pix_fmt_name(pix_fmt), width, height,
               video_dst_filename);
    }

    if (audio_stream) {
        enum AVSampleFormat sfmt = audio_dec_ctx->sample_fmt;
        int n_channels = audio_dec_ctx->channels;
        const char *fmt;

        if (av_sample_fmt_is_planar(sfmt)) {
            const char *packed = av_get_sample_fmt_name(sfmt);
            printf("Warning: the sample format the decoder produced is planar "
                   "(%s). This example will output the first channel only.\n",
                   packed ? packed : "?");
            sfmt = av_get_packed_sample_fmt(sfmt);
            n_channels = 1;
        }

        if ((ret = get_format_from_sample_fmt(&fmt, sfmt)) < 0)
            goto end;

        printf("Play the output audio file with the command:\n"
               "ffplay -f %s -ac %d -ar %d %s\n",
               fmt, n_channels, audio_dec_ctx->sample_rate,
               audio_dst_filename);
    }

end:
    avcodec_free_context(&video_dec_ctx);
    avcodec_free_context(&audio_dec_ctx);
    avformat_close_input(&fmt_ctx);
    if (video_dst_file)
        fclose(video_dst_file);
    if (audio_dst_file)
        fclose(audio_dst_file);
    av_frame_free(&frame);
    av_free(video_dst_data[0]);

    return ret < 0;
}
2.编码

大流程可以划分为输入、输出、转码、播放四大块。

其中转码涉及比较多的处理环节,从图中可以看出,转码功能在整个功能图中占比很大。转码的核心功能在解码和编码两个部分,但在一个可用的示例程序中,编码解码与输入输出是难以分割的。

解复用器为解码器提供输入,解码器会输出原始帧,对原始帧可进行各种复杂的滤镜处理,滤镜处理后的帧经编码器生成编码帧,多路流的编码帧经复用器输出到输出文件。

cpp 复制代码
/**
 * @file
 * video encoding with libavcodec API example
 *
 * @example encode_video.c
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include <libavcodec/avcodec.h>

#include <libavutil/opt.h>
#include <libavutil/imgutils.h>

static void encode(AVCodecContext *enc_ctx, AVFrame *frame, AVPacket *pkt,
                   FILE *outfile)
{
    int ret;

    /* send the frame to the encoder */
    if (frame)
        printf("Send frame %3"PRId64"\n", frame->pts);

    ret = avcodec_send_frame(enc_ctx, frame);
    if (ret < 0) {
        fprintf(stderr, "Error sending a frame for encoding\n");
        exit(1);
    }

    while (ret >= 0) {
        ret = avcodec_receive_packet(enc_ctx, pkt);
        if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
            return;
        else if (ret < 0) {
            fprintf(stderr, "Error during encoding\n");
            exit(1);
        }

        printf("Write packet %3"PRId64" (size=%5d)\n", pkt->pts, pkt->size);
        fwrite(pkt->data, 1, pkt->size, outfile);
        av_packet_unref(pkt);
    }
}

int mainsse22(int argc, char **argv)
{
    const char *filename, *codec_name;
    const AVCodec *codec;
    AVCodecContext *c= NULL;
    int i, ret, x, y;
    FILE *f;
    AVFrame *frame;
    AVPacket *pkt;
    uint8_t endcode[] = { 0, 0, 1, 0xb7 };

    if (argc <= 2) {
        fprintf(stderr, "Usage: %s <output file> <codec name>\n", argv[0]);
        exit(0);
    }
    filename = argv[1];
    codec_name = argv[2];

    /* find the mpeg1video encoder */
    codec = avcodec_find_encoder_by_name(codec_name);
    if (!codec) {
        fprintf(stderr, "Codec '%s' not found\n", codec_name);
        exit(1);
    }

    c = avcodec_alloc_context3(codec);
    if (!c) {
        fprintf(stderr, "Could not allocate video codec context\n");
        exit(1);
    }

    pkt = av_packet_alloc();
    if (!pkt)
        exit(1);

    /* put sample parameters */
    c->bit_rate = 400000;
    /* resolution must be a multiple of two */
    c->width = 352;
    c->height = 288;
    /* frames per second */
    c->time_base = (AVRational){1, 25};
    c->framerate = (AVRational){25, 1};

    /* emit one intra frame every ten frames
     * check frame pict_type before passing frame
     * to encoder, if frame->pict_type is AV_PICTURE_TYPE_I
     * then gop_size is ignored and the output of encoder
     * will always be I frame irrespective to gop_size
     */
    c->gop_size = 10;
    c->max_b_frames = 1;
    c->pix_fmt = AV_PIX_FMT_YUV420P;

    if (codec->id == AV_CODEC_ID_H264)
        av_opt_set(c->priv_data, "preset", "slow", 0);

    /* open it */
    ret = avcodec_open2(c, codec, NULL);
    if (ret < 0) {
        fprintf(stderr, "Could not open codec: %s\n", av_err2str(ret));
        exit(1);
    }

    f = fopen(filename, "wb");
    if (!f) {
        fprintf(stderr, "Could not open %s\n", filename);
        exit(1);
    }

    frame = av_frame_alloc();
    if (!frame) {
        fprintf(stderr, "Could not allocate video frame\n");
        exit(1);
    }
    frame->format = c->pix_fmt;
    frame->width  = c->width;
    frame->height = c->height;

    ret = av_frame_get_buffer(frame, 0);
    if (ret < 0) {
        fprintf(stderr, "Could not allocate the video frame data\n");
        exit(1);
    }

    /* encode 1 second of video */
    for (i = 0; i < 25; i++) {
        fflush(stdout);

        /* make sure the frame data is writable */
        ret = av_frame_make_writable(frame);
        if (ret < 0)
            exit(1);

        /* prepare a dummy image */
        /* Y */
        for (y = 0; y < c->height; y++) {
            for (x = 0; x < c->width; x++) {
                frame->data[0][y * frame->linesize[0] + x] = x + y + i * 3;
            }
        }

        /* Cb and Cr */
        for (y = 0; y < c->height/2; y++) {
            for (x = 0; x < c->width/2; x++) {
                frame->data[1][y * frame->linesize[1] + x] = 128 + y + i * 2;
                frame->data[2][y * frame->linesize[2] + x] = 64 + x + i * 5;
            }
        }

        frame->pts = i;

        /* encode the image */
        encode(c, frame, pkt, f);
    }

    /* flush the encoder */
    encode(c, NULL, pkt, f);

    /* add sequence end code to have a real MPEG file */
    if (codec->id == AV_CODEC_ID_MPEG1VIDEO || codec->id == AV_CODEC_ID_MPEG2VIDEO)
        fwrite(endcode, 1, sizeof(endcode), f);
    fclose(f);

    avcodec_free_context(&c);
    av_frame_free(&frame);
    av_packet_free(&pkt);

    return 0;
}
相关推荐
西岸行者4 天前
学习笔记:SKILLS 能帮助更好的vibe coding
笔记·学习
悠哉悠哉愿意4 天前
【单片机学习笔记】串口、超声波、NE555的同时使用
笔记·单片机·学习
别催小唐敲代码4 天前
嵌入式学习路线
学习
毛小茛4 天前
计算机系统概论——校验码
学习
babe小鑫4 天前
大专经济信息管理专业学习数据分析的必要性
学习·数据挖掘·数据分析
winfreedoms4 天前
ROS2知识大白话
笔记·学习·ros2
在这habit之下4 天前
Linux Virtual Server(LVS)学习总结
linux·学习·lvs
我想我不够好。4 天前
2026.2.25监控学习
学习
im_AMBER4 天前
Leetcode 127 删除有序数组中的重复项 | 删除有序数组中的重复项 II
数据结构·学习·算法·leetcode
CodeJourney_J4 天前
从“Hello World“ 开始 C++
c语言·c++·学习