WLAN基础配置之AP上线
配置WLAN无线网络的第一阶段，AP上线技术：
实验目标：使得AP能够获得来自AC的DHCP地址服务的地址，且是该网段地址池中的IP。
实验步骤：
1.把AC当作三层交换机配置虚拟网关
sys
Enter system view, return user view with Ctrl+Z.
AC6605\]undo in e Info: Information center is disabled. \[AC6605\]vlan 100 Info: This operation may take a few seconds. Please wait for a moment...done. \[AC6605-vlan100\]int vlan 100 \[AC6605-Vlanif100\]ip add 172.16.100.1 24 \[AC6605-Vlanif100\]int g0/0/1 \[AC6605-GigabitEthernet0/0/1\]p l a \[AC6605-GigabitEthernet0/0/1\]p d v 100 \[AC6605-GigabitEthernet0/0/1
2.配置核心交换机S-CORE
S-CORE\]vlan 100 \[S-CORE-vlan100\]q \[S-CORE\]int g0/0/5 把与AC相连的接口加入互联vlan100 \[S-CORE-GigabitEthernet0/0/5\]p l a \[S-CORE-GigabitEthernet0/0/5\]p d v 100 \[S-CORE-GigabitEthernet0/0/5\]q \[S-CORE\]int g0/0/1 与下联链路配置trunk并放行VLAN10 VLAN 100的流量 \[S-CORE-GigabitEthernet0/0/1\]p l t \[S-CORE-GigabitEthernet0/0/1\]p t a v 10 100 3.配置接入层交换机 \[S\]vlan b 10 100 Info: This operation may take a few seconds. Please wait for a moment...done. \[S\]int e0/0/1 \[S-Ethernet0/0/1\]p l a \[S-Ethernet0/0/1\]p d v 10 \[S-Ethernet0/0/1\]int e0/0/2 \[S-Ethernet0/0/2\]p l a \[S-Ethernet0/0/2\]p d v 10 \[S-Ethernet0/0/2\]int e0/0/4 \[S-Ethernet0/0/4\]p l a \[S-Ethernet0/0/4\]p d v 100 \[S-Ethernet0/0/4\]q \[S\]dis vlan \[S\]int e0/0/3 \[S-Ethernet0/0/3\]p l t \[S-Ethernet0/0/3\]p t a v 10 100 \[S-Ethernet0/0/3
- 在AC上配置DHCP服务
AC6605\]dhcp en Info: The operation may take a few seconds. Please wait for a moment.done. \[AC6605\]int vlan 100 \[AC6605-Vlanif100\]dhcp se \[AC6605-Vlanif100\]dhcp select in \[AC6605-Vlanif100\]dhcp select interface \[AC6605-Vlanif100
5.在AP上查看是否获得了AC上的DHCP地址
