Redis Cluster 的主从复制机制作为其高可用性和数据一致性的关键组件，确保了在主节点发生故障时，系统能够自动切换到从节点以继续提供服务。主从复制的实现包括数据同步、心跳检测、故障检测及自动故障转移等步骤。下面我们详细解析这些步骤，并结合代码示例进行深入探讨。
1. 主从节点定义
在 Redis 集群中，每个节点可以是主节点（Master）或从节点（Slave）。从节点实时复制主节点的数据。
代码示例
c
typedef struct clusterNode {
char name[40]; /* Node ID */
int flags; /* Node flags: master, slave, fail, etc. */
struct clusterNode *slaveof; /* Master of this node if it's a slave */
// other fields...
} clusterNode;
#define CLUSTER_NODE_MASTER 0x01
#define CLUSTER_NODE_SLAVE 0x022. 数据同步
当从节点启动或主节点发生变化时，从节点需要与其主节点进行数据同步。数据同步包括全量同步和增量同步。
代码示例
c
/* Function to initiate synchronization with master */
void syncWithMaster(clusterNode *slave, clusterNode *master) {
// Send SYNC command to master
printf("Sending SYNC command to master %s\n", master->name);
// In a real implementation, here we would send a SYNC message over the network
// to the master node and wait for its response.
}
/* Example usage */
int main() {
clusterNode master = {"master1", CLUSTER_NODE_MASTER, NULL};
clusterNode slave = {"slave1", CLUSTER_NODE_SLAVE, &master};
syncWithMaster(&slave, &master);
return 0;
}3. 心跳检测
主从节点之间会定期发送心跳消息，以确保节点之间的连接是活跃的，并且从节点可以及时知道主节点的状态。
代码示例
c
#include <time.h>
#define HEARTBEAT_INTERVAL 1000 // 1 second
/* Function to send heartbeat message */
void sendHeartbeat(clusterNode *node) {
printf("Sending heartbeat to node %s\n", node->name);
// In a real implementation, here we would send a PING message over the network.
}
/* Function to check for node failures based on heartbeat */
void checkHeartbeat(clusterNode *node) {
time_t now = time(NULL);
if (now - node->last_heartbeat > HEARTBEAT_INTERVAL) {
printf("Node %s is not responding\n", node->name);
// Mark node as failed
node->flags |= CLUSTER_NODE_FAIL;
}
}
/* Example usage */
int main() {
clusterNode master = {"master1", CLUSTER_NODE_MASTER, NULL};
master.last_heartbeat = time(NULL) - 2; // Simulate a delay in heartbeat
sendHeartbeat(&master);
checkHeartbeat(&master);
return 0;
}4. 故障检测与故障转移
当主节点被检测到故障时，从节点会自动接管主节点的角色。这包括选举新的主节点和更新集群状态。
代码示例
c
/* Function to handle failover */
void handleFailover(clusterNode *slave) {
if (!(slave->flags & CLUSTER_NODE_SLAVE)) return;
printf("Failover initiated by slave %s\n", slave->name);
// Promote the slave to master
slave->flags &= ~CLUSTER_NODE_SLAVE;
slave->flags |= CLUSTER_NODE_MASTER;
printf("Slave %s promoted to master\n", slave->name);
// In a real implementation, we would also update the cluster state and notify other nodes.
}
/* Example usage */
int main() {
clusterNode master = {"master1", CLUSTER_NODE_MASTER, NULL};
clusterNode slave = {"slave1", CLUSTER_NODE_SLAVE, &master};
// Simulate master failure
master.flags |= CLUSTER_NODE_FAIL;
if (master.flags & CLUSTER_NODE_FAIL) {
handleFailover(&slave);
}
return 0;
}综合示例
以下是一个综合示例，展示了如何定义主从节点、进行数据同步、发送心跳检测以及处理故障转移。
综合代码示例
c
#include <stdio.h>
#include <stdint.h>
#include <time.h>
#define CLUSTER_NODE_MASTER 0x01
#define CLUSTER_NODE_SLAVE 0x02
#define CLUSTER_NODE_FAIL 0x04
#define HEARTBEAT_INTERVAL 1000 // 1 second
typedef struct clusterNode {
char name[40]; /* Node ID */
int flags; /* Node flags: master, slave, fail, etc. */
struct clusterNode *slaveof; /* Master of this node if it's a slave */
time_t last_heartbeat; /* Last time a heartbeat was received */
} clusterNode;
/* Function to initiate synchronization with master */
void syncWithMaster(clusterNode *slave, clusterNode *master) {
// Send SYNC command to master
printf("Sending SYNC command to master %s\n", master->name);
// In a real implementation, here we would send a SYNC message over the network
// to the master node and wait for its response.
}
/* Function to send heartbeat message */
void sendHeartbeat(clusterNode *node) {
printf("Sending heartbeat to node %s\n", node->name);
// In a real implementation, here we would send a PING message over the network.
node->last_heartbeat = time(NULL);
}
/* Function to check for node failures based on heartbeat */
void checkHeartbeat(clusterNode *node) {
time_t now = time(NULL);
if (now - node->last_heartbeat > HEARTBEAT_INTERVAL) {
printf("Node %s is not responding\n", node->name);
// Mark node as failed
node->flags |= CLUSTER_NODE_FAIL;
}
}
/* Function to handle failover */
void handleFailover(clusterNode *slave) {
if (!(slave->flags & CLUSTER_NODE_SLAVE)) return;
printf("Failover initiated by slave %s\n", slave->name);
// Promote the slave to master
slave->flags &= ~CLUSTER_NODE_SLAVE;
slave->flags |= CLUSTER_NODE_MASTER;
printf("Slave %s promoted to master\n", slave->name);
// In a real implementation, we would also update the cluster state and notify other nodes.
}
/* Example usage */
int main() {
clusterNode master = {"master1", CLUSTER_NODE_MASTER, NULL, time(NULL)};
clusterNode slave = {"slave1", CLUSTER_NODE_SLAVE, &master, time(NULL)};
// Initial synchronization
syncWithMaster(&slave, &master);
// Periodically send heartbeat
sendHeartbeat(&master);
// Simulate master failure
master.flags |= CLUSTER_NODE_FAIL;
master.last_heartbeat = time(NULL) - 2; // Simulate a delay in heartbeat
// Check heartbeat and handle failover if necessary
checkHeartbeat(&master);
if (master.flags & CLUSTER_NODE_FAIL) {
handleFailover(&slave);
}
return 0;
}这个综合示例展示了 Redis Cluster 主从复制的主要组件和流程：数据同步、心跳检测和故障转移。实际的 Redis 实现会更加复杂，包括网络通信、数据一致性保证以及更多的状态管理，以上示例为简化版，用于解释基本原理。