Kali Linux 配置 i3wm 平铺式桌面完整教程
环境 ：全新安装的 Kali Rolling，普通用户（有 sudo 权限）、能联网，物理机或 VMware 虚拟机均可。
做法：按下面的步骤从第 1 步做到第 10 步，每步都是"做什么 → 文件写什么 → 怎么验证"。
开始前记住三条，能省几小时排错：
- 改完 i3 配置立刻校验：
i3 -C -c ~/.config/i3/config------i3 有语法错误会整份拒绝加载；- 字体族名必须与
fc-list输出完全一致------差一个Solid后缀，图标全变方块且无报错；- 配置里别留不存在的路径------不报错，但壁纸/图标等功能静默失效。
约定 ：
$mod= Alt 键；~/= 你的家目录；带sudo的命令需要输登录密码；文中 IP、
/home/sirius等均为示例，替换成你自己的。出问题先查 排错手册 ，配置原文都在 附录 A。
效果图如下
第 1 步：安装组件
1.1 先更新系统
bash
sudo apt update && sudo apt full-upgrade -y如果
apt update卡在某个源、或者下载速度像停住：加
-o Acquire::ForceIPv4=true（国内部分镜像 IPv6 不通，见坑 1）。
1.2 一次装全（复制整段执行）
bash
sudo apt install -y --no-install-recommends \
i3 i3status i3lock xss-lock xautolock \
polybar feh dunst xcompmgr \
lxpolkit lxappearance mate-power-manager network-manager-gnome \
rofi ranger fzf dmenu xfce4-appfinder nautilus konsole \
blueman copyq papirus-icon-theme \
scrot imagemagick pulseaudio-utils pavucontrol \
fastfetch jq xinput xdotool x11-xserver-utils \
zsh zsh-autosuggestions zsh-syntax-highlighting lolcat git curl \
fonts-firacode fonts-font-awesome fonts-font-awesome-legacy \
fonts-hack fonts-cantarell fonts-wqy-microhei fonts-wqy-zenhei \
fonts-symbola fonts-noto-color-emoji1.3 每个包是干什么的（出问题好定位）
| 分组 | 包 | 用途 |
|---|---|---|
| 窗口管理 | i3 i3status |
平铺窗口管理器本体及其状态源（状态栏用 polybar，不启用 i3bar） |
| 锁屏 | i3lock xss-lock xautolock |
锁屏程序 / 休眠前自动锁 / 无操作 N 分钟自动锁 |
| 状态栏 | polybar |
顶部状态栏 |
| 壁纸 | feh |
设壁纸（nitrogen 已从 Kali 源移除，见坑 2） |
| 通知 | dunst |
系统通知弹窗 |
| 合成器 | xcompmgr |
提供透明/阴影（polybar 和 rofi 的圆角依赖它） |
| 认证 | lxpolkit |
图形化输入密码的授权弹窗（替代已移除的 policykit-1-gnome） |
| 外观 | lxappearance papirus-icon-theme |
GTK 主题/图标设置；rofi -show-icons 的图标来自图标主题 |
| 电源 | mate-power-manager |
电池托盘（笔记本/虚拟机可关） |
| 网络 | network-manager-gnome |
nm-applet 网络托盘图标 |
| 蓝牙 | blueman |
blueman-applet 蓝牙托盘 |
| 启动器 | rofi dmenu xfce4-appfinder |
主用 rofi，另两个是可选的习惯键位 |
| 文件管理 | nautilus ranger |
图形文件管理器 / 终端文件管理器 |
| 终端 | konsole |
本文主力终端 |
| 剪贴板 | copyq |
剪贴板历史（i3 自启里有它） |
| 截图/图像 | scrot imagemagick |
截屏（锁屏背景）+ convert 模糊处理 |
| 音频 | pulseaudio-utils pavucontrol |
pactl（音量键必需，漏装则音量键全无反应）/ 图形音量面板 |
| 系统信息 | fastfetch |
代替已移除的 neofetch（见坑 3） |
| 脚本依赖 | jq xinput xdotool x11-xserver-utils |
USB 模块解析 JSON / 打字速度统计 / 模拟按键测试 / xset 等 X 工具 |
| shell | zsh zsh-autosuggestions zsh-syntax-highlighting lolcat |
交互 shell 及其插件、彩色输出 |
| 网络下载 | git curl |
装 zim 框架、下载 daily-poem 用 |
| 字体 | 见下一章 | 图标和等宽字体，少一个就满屏方块 |
可选（本文配置里用到，但你可以不做）：
bash
# 浏览器（i3 里 Alt+Shift+g 绑定的是 google-chrome）
wget -q -O /tmp/chrome.deb https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb && sudo apt install -y /tmp/chrome.deb
# uTools 效率工具（i3 自启里有 /usr/bin/utools，不装就删那一行）1.4 验证软件包是否真的装上了
bash
for c in i3 polybar rofi konsole feh dunst xcompmgr scrot convert pactl \
fastfetch jq xinput xdotool xautolock lxpolkit nm-applet zsh; do
printf '%-12s %s\n' "$c" "$(command -v "$c" || echo '❌ 缺失')"
done出现 ❌ 缺失 就单独补装，别往下走------pactl 缺了音量键会完全无反应，convert 缺了锁屏会变成纯黑屏。
第 2 步：字体与目录骨架
2.1 字体自查（图标显示的前提）
polybar 的状态栏图标、rofi 的图标、提示符的符号，全部依赖特定字体存在 。
先确认这几族字体在不在（族名必须一模一样）：
bash
fc-list : family | tr ',' '\n' | sort -u | grep -iE "Font Awesome|Symbola|Noto Color Emoji|Fira Code|WenQuanYi|DejaVu Sans"你至少要看到下面这些（左边是族名，右边是对应的 apt 包）：
| 族名（配置里要写这个） | 由哪个包提供 | 用在哪 |
|---|---|---|
Font Awesome 5 Free Solid |
fonts-font-awesome |
状态栏图标（CPU/内存/音量等） |
Font Awesome 7 Brands |
可能要手工装（见 2.2） | 品牌图标（Chrome、GitHub 等） |
Symbola |
fonts-symbola |
状态栏 emoji（🐏 🌐 🔊）必须是它，不能是彩色 emoji |
Noto Color Emoji |
fonts-noto-color-emoji |
兜底（排在 Symbola 后面） |
Fira Code |
fonts-firacode |
konsole 终端 + rofi 文字 |
WenQuanYi Micro Hei |
fonts-wqy-microhei |
锁屏的中文时间/日期/提示 |
DejaVu Sans |
系统自带 | ↑↓ █░ 之类符号 |
2.2 如果 Font Awesome 7 Brands 没有
这个族名是 Font Awesome 6/7 的 fa-brands-400.ttf 提供的，Kali 源里的 fonts-font-awesome 版本不一定带。
它只影响品牌图标 （不影响 CPU/内存/音量这些核心图标），没有也能用，polybar 会自动回退到后面的字体。
想要的话手工装一份（不需要 root）：
bash
mkdir -p ~/.local/share/fonts
# 从 Font Awesome 官网或 GitHub 下载 fa-brands-400.ttf 后：
cp fa-brands-400.ttf ~/.local/share/fonts/
fc-cache -f ~/.local/share/fonts
fc-list | grep -i "awesome 7 brands" # 能看到这一行就成功了2.3 图标变方块时的排查顺序（重要）
按这个顺序查，别乱试：
bash
# ① 这个族名到底存不存在（把配置里写的名字原样贴进去）
fc-match "Font Awesome 5 Free Solid"
# 输出里如果是别的字体名（如 WenQuanYi），说明没匹配上 → 族名写错了
# ② 这个字符由哪个字体提供（把图标字符贴进去）
fc-match -s "🌐" | head -3
# ③ polybar 会告诉你哪个字体匹配失败
polybar mybar -l info 2>&1 | grep -i font最常见的错 ：配置里写 Font Awesome 5 Free，但实际注册的族名是
Font Awesome 5 Free Solid。少一个 Solid 就整排图标空白（坑 6）。
2.4 建立目录骨架
一条命令把要用的目录全建好（重复执行无害）：
bash
mkdir -p ~/.config/i3/scripts \
~/.config/polybar/scripts \
~/.config/rofi \
~/.local/share/konsole \
~/Pictures/wallpapers各目录装什么：
| 目录 | 内容 |
|---|---|
~/.config/i3/ |
config（主配置）+ scripts/（音量脚本） |
~/.config/polybar/ |
config、launch.sh、netinfo.sh、scripts/（天气/USB/诗词） |
~/.config/rofi/ |
config.rasi（启动器主题） |
~/.local/share/konsole/ |
profile（字体字号）和 colorscheme（配色） |
~/Pictures/wallpapers/ |
壁纸放这里，本文统一用 wall.jpg 这个名字 |
第 3 步：i3 主配置
3.0 把完整配置写进文件
i3 的配置只有一个文件 ：~/.config/i3/config。完整的 322 行配置见 附录 A.1，直接整份复制保存即可。
bash
mkdir -p ~/.config/i3
nano ~/.config/i3/config # 把附录 A.1 的全文整段粘贴进去，保存该文件开头带注释说明它是
i3-config-wizard生成的------不用管 ，只改内容、不重跑向导。新装 i3 第一次登录会弹向导问 Win 还是 Alt 作修饰键，随便选（选完就会被本文的配置覆盖）。
写完立刻校验语法：
bash
i3 -C -c ~/.config/i3/config && echo "✅ 配置语法通过"这一步不通过，后面所有步骤都白做------i3 加载失败会退回默认配置，你会以为"改了没用"。
下面是这份配置逐段的讲解。先看讲解，再去 4.5 改自己机器要改的几处。
3.1 修饰键与基础设置
set $mod Mod1 # Alt 作为主修饰键（Mod4 = Win 键，按喜好选）
new_window pixel 2 # 窗口 2px 细边框
new_float normal
hide_edge_borders both
gaps inner 12 # 窗口间隙 12px，更透气set $mod Mod1：把Alt定义成变量$mod，后面所有快捷键都写成$mod+xxxnew_window pixel 2：窗口用 2px 像素边框（不是标题栏）hide_edge_borders both：单窗口/贴边时不画外边框，视觉更干净gaps inner 12：平铺窗口之间留 12px 空隙
3.2 窗口颜色（必须写满 5 个颜色位！）
set $bg-color #2f343f
set $inactive-bg-color #2f343f
set $text-color #f3f4f5
set $inactive-text-color #676E7D
set $urgent-bg-color #E53935
set $focus-border #2bcec2
set $inactive-border #3b4252
# 边框 背景 文本 指示条 子边框(pixel边框实际显示的颜色)
client.focused $focus-border $bg-color $text-color $focus-border $focus-border
client.unfocused $inactive-border $inactive-bg-color $inactive-text-color $inactive-border $inactive-border
client.focused_inactive $inactive-border $inactive-bg-color $inactive-text-color $inactive-border $inactive-border
client.urgent $urgent-bg-color $urgent-bg-color $text-color $urgent-bg-color $urgent-bg-color坑 4 ：
new_window pixel模式下，实际渲染的是第 5 个颜色位（child_border）。如果只写 4 个颜色，边框会莫名变成第 4 位（indicator）的颜色（比如亮绿色）。
5 个颜色位全部显式写上最稳妥。
3.3 常用快捷键
下面只是节选 （完整键位见附录 A.1，322 行）。注意真实配置里"锁屏/退出/重启/关机"
走的是 mode_system 模式菜单：先按 Alt+Shift+Ctrl+q，再按 l/e/r/o。
bindsym $mod+Return exec konsole # 终端
bindsym $mod+d exec --no-startup-id rofi -show drun -theme ~/.config/rofi/config.rasi -show-icons
bindsym $mod+z exec nautilus # 文件管理器
bindsym $mod+Shift+g exec google-chrome # 浏览器
bindsym $mod+m exec ~/.config/polybar/launch.sh # 启动状态栏
bindsym $mod+Shift+m exec killall polybar # 关闭状态栏
bindsym $mod+Shift+c reload # 重载配置
bindsym $mod+Shift+r restart # 重启 i3
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m '退出?' -b yes 'i3-msg exit'"3.4 开机自启动
附录 A.1 里的自启动段（exec --no-startup-id ...）实际是这些，逐行对应：
exec --no-startup-id blueman-applet # 蓝牙托盘
exec --no-startup-id lxpolkit # 认证弹窗（图形化输密码）
exec --no-startup-id vmware-user-suid-wrapper # VMware 工具，物理机删掉
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lockr --blur 60 # 休眠前自动锁屏
exec --no-startup-id /usr/bin/utools # uTools 效率工具，不装就删
exec_always feh --randomize --bg-fill 图片/壁纸/浏览器/xxx.jpg # 壁纸，改路径
exec --no-startup-id copyq # 剪贴板历史
exec --no-startup-id nm-applet # 网络托盘图标
exec --no-startup-id ~/.config/polybar/launch.sh # 状态栏
exec --no-startup-id xcompmgr # 合成器（透明/圆角）
exec --no-startup-id dunst # 系统通知
exec --no-startup-id xautolock -time 10000 -locker i3lockr --blur 60 # 10 分钟无操作自动锁
mate-power-manager（电池托盘）在 A.1 里是注释掉 的，需要就删掉行首的#。三处锁屏（
Alt+l、xss-lock、xautolock）都调用i3lockr，所以脚本必须先建好（第 4 步 4.4）。
3.5 必须按你的机器改的地方（不改会出问题）
附录 A.1 是完整配置，其中若干行与本机环境相关（第三方软件、特定壁纸路径等）。
这些路径在你机器上不存在时，程序通常不报错、只是功能不生效。按表逐条处理：
| 在 A.1 里的行 | 内容 | 你该怎么改 |
|---|---|---|
| 自启动 | exec --no-startup-id /usr/bin/utools |
不装 uTools 就删掉整行 |
| 自启动 | exec --no-startup-id vmware-user-suid-wrapper |
物理机删掉整行；VMware 里保留 |
| 自启动 | exec_always feh --randomize --bg-fill 图片/壁纸/浏览器/20230827170427.jpg |
改成你的壁纸路径（见下） |
| 快捷键 | bindsym $mod+Ctrl+1 ~ $mod+Ctrl+0（10 行壁纸轮换） |
没有这些图就整段删掉 |
| 快捷键 | bindsym $mod+Shift+g exec google-chrome |
没装 Chrome 就删，或改成 firefox |
| 快捷键 | bindsym $mod+z exec nautilus |
你用 thunar 就改 thunar |
一键处理（壁纸统一成 ~/Pictures/wallpapers/wall.jpg）：
bash
# 1) 放一张你的壁纸进统一位置（把 /path/to/你的图.jpg 换成实际路径）
cp /path/to/你的图.jpg ~/Pictures/wallpapers/wall.jpg
# 2) 把所有壁纸路径统一改成新路径
sed -i 's|图片/壁纸/浏览器/[^ "]*|Pictures/wallpapers/wall.jpg|g; s|图片/壁纸/[^ "]*|Pictures/wallpapers/wall.jpg|g' ~/.config/i3/config
# 3) 删掉 10 个壁纸轮换快捷键（$mod+Ctrl+数字）
sed -i '/bindsym \$mod+Ctrl+[0-9]/d' ~/.config/i3/config
# 4) 不装 uTools / 物理机 → 删掉对应自启行
sed -i '/utools/d; /vmware-user-suid-wrapper/d' ~/.config/i3/config
# 5) 重新校验
i3 -C -c ~/.config/i3/config && echo "✅ 改完仍通过"别跳过第 5 步。上面的 sed 是文本替换，改错一行就是语法错误。
3.6 应用配置
bash
# 当前会话里直接生效（Alt+Shift+c 等价）
i3-msg reload
# 语法有问题时，i3 的报错在这里
i3-msg -t get_version首次配完建议注销重新登录，让自启动项全部按新配置跑一遍。
第 4 步：音量与锁屏脚本
i3 主配置里引用了两个脚本目录 + 一个系统级脚本。这三个必须存在并且可执行，否则快捷键按了没反应。
| 脚本 | 路径 | 全文 |
|---|---|---|
| 音量加（100% 封顶） | ~/.config/i3/scripts/volup.sh |
下面 4.2 |
| 音量减 | ~/.config/i3/scripts/voldown.sh |
下面 4.3 |
| 锁屏美化 | /usr/local/bin/i3lockr |
坑 18（含依赖安装） |
4.1 为什么音量要单独写脚本
i3 默认绑定是 pactl set-sink-volume @DEFAULT_SINK@ +10%，而 pactl 允许音量超过 100% 。
按住音量+键时键盘会自动重复触发，几秒钟就能冲到 2350%（82 dB）------声音严重削波失真，还伤耳朵和喇叭。
所以加音量这一步要自己做上限保护（坑 19）。
4.2 ~/.config/i3/scripts/volup.sh
bash
#!/bin/sh
# 加大音量：步进 10%，上限 100%（超过 100% 会削波失真）
export XDG_RUNTIME_DIR=/run/user/$(id -u)
# 读当前音量：pactl 输出形如 "Volume: front-left: 32768 / 50% / -18.06 dB, ..."
# head -1 取第一行 → grep -o 抠出 "50%" → tr -d 去掉百分号
V=$(pactl get-sink-volume @DEFAULT_SINK@ | head -1 | grep -o "[0-9]*%" | head -1 | tr -d "%")
[ -z "$V" ] && exit 0
# 91% 以上再加 10 会冲过 100，直接精确设到 100 封顶
if [ "$V" -ge 91 ]; then
pactl set-sink-volume @DEFAULT_SINK@ 100%
else
pactl set-sink-volume @DEFAULT_SINK@ +10%
fi4.3 ~/.config/i3/scripts/voldown.sh
bash
#!/bin/sh
# 降低音量：步进 10%（0% 是天然下限，不需要保护）
export XDG_RUNTIME_DIR=/run/user/$(id -u)
pactl set-sink-volume @DEFAULT_SINK@ -10%创建并授权：
bash
mkdir -p ~/.config/i3/scripts
# 把上面两段分别存成 volup.sh 和 voldown.sh 后：
chmod +x ~/.config/i3/scripts/volup.sh ~/.config/i3/scripts/voldown.sh
# 立即测一下（应能看到音量数值变化）
~/.config/i3/scripts/volup.sh && pactl get-sink-volume @DEFAULT_SINK@ | head -1坑 ：
pactl必须装pulseaudio-utils。漏装时按键完全无反应且没有任何报错 ，这是最容易漏查的一项（坑 17）。
4.4 锁屏脚本 i3lockr
i3 配置里有三处锁屏引用（Alt+l、xss-lock 休眠锁、xautolock 10 分钟自动锁），全都调 i3lockr。
i3lockr 是一个自建脚本 （Kali 仓库里没有这个程序，需要自己建），它负责"截图 → 模糊 → 上锁"。
依赖两样：
bash
# ① 截图工具（第 1 步已装）
sudo apt install -y scrot imagemagick
# ② i3lock-color（普通 i3lock 不支持时钟/圆环，且它和系统包冲突，解包安装）
curl -fsSL -o /tmp/i3lock-color.deb \
"http://http.kali.org/kali/pool/main/i/i3lock-color/i3lock-color_2.13.c.5-0kali1_amd64.deb"
sudo dpkg-deb -x /tmp/i3lock-color.deb /tmp/i3lc
sudo cp /tmp/i3lc/usr/bin/i3lock /usr/local/bin/i3lock-color
sudo chmod +x /usr/local/bin/i3lock-color && rm -rf /tmp/i3lc /tmp/i3lock-color.deb然后是脚本本体 /usr/local/bin/i3lockr------全文、逐行注释、每个参数的含义都在排错手册坑 18 ，
把那段整块存成该文件再 sudo chmod +x /usr/local/bin/i3lockr 即可。
可以先不配锁屏 ：没配好时
Alt+l只会闪一下没反应，不影响其他功能。建议先把桌面整体跑通，最后再按坑 18 把脚本补齐。
--blur 60是什么 ：配置里三处都写成i3lockr --blur 60，这个参数来自社区版 i3lockr的模糊半径写法。本文的脚本不认识它、会直接忽略 ，完全不影响使用，
所以 i3 里的绑定一个字都不用改 （要调模糊程度就改脚本里
convert那一行）。
4.5 权限一次性检查
bash
ls -l ~/.config/i3/scripts/ ~/.config/polybar/launch.sh ~/.config/polybar/netinfo.sh 2>/dev/null
# 每个脚本都要有 x（如 -rwxr-xr-x）。没有就 chmod +x 补上第 5 步：polybar 状态栏
5.0 文件清单
~/.config/polybar/
├── config # 主配置（附录 A.2，837 行，全部模块）
├── launch.sh # 启动脚本（附录 A.3） chmod +x
├── netinfo.sh # 网卡自动检测（本文 6.3） chmod +x
└── scripts/ # 附加脚本（附录 A.4 / A.4b~d），全部 chmod +x
├── daily-poem # 今日诗词二进制（GitHub 下载，见 5.6）
├── poem.txt # 诗词备用语料
├── info-hackspeed.sh # 打字速度
├── openweathermap-fullfeatured.sh # 天气（需自己的 API key）
└── system-usb-udev.sh # USB 插拔监控一次把该给权限的都给了：
bash
chmod +x ~/.config/polybar/launch.sh ~/.config/polybar/netinfo.sh ~/.config/polybar/scripts/*.sh5.1 基本结构
~/.config/polybar/
├── config # 主配置
├── launch.sh # 启动脚本（chmod +x）
└── scripts/ # 自定义模块脚本（每日诗词、USB 监控等）launch.sh 的作用就三步：杀掉旧 polybar 实例 → 等它退干净 → 启动 mybar
（mybar 是 config 里 [bar/mybar] 这个名字）。全文见 附录 A.3（12 行，带日志输出）。
5.2 内存模块：百分比 + Mem 字样
ini
[module/memory]
type = internal/memory
interval = 1
format = <label> ; 已去掉渐变色条（省空间），想加回来改为 <label> <bar-used>
format-padding = 2
format-underline = #FFA07A
; 内存用量渐变色条（低→高：绿→黄→橙→红）
label = Mem%percentage_used%% ; 芯片图标+Mem 字样，与 CPU 模块（CPU%percentage%%）风格一致
bar-used-width = 10
bar-used-foreground-0 = #90EE90
bar-used-foreground-1 = #f1fa8c
bar-used-foreground-2 = #fba922
bar-used-foreground-3 = #dd2727
bar-used-fill = █
bar-used-empty = ░
bar-used-empty-foreground = #555555
bar-used-indicator =坑 5 ：
%gb_total%显示的是本机真实内存。别像网上教程一样写死/16GiB，内存只有 4G 的机器会显示错误数据。
5.3 网络模块：自动检测网卡 + 显示 IP + 合计网速（支持多网卡）
坑 6a ：
internal/network模块的interface是写死的 。双网卡机器（eth0 + eth1）断开 eth0 后，绑死 eth0 的模块会一直显示"网线未连接"，
根本不会去看 eth1。正确做法是用脚本模块自动检测当前有 IP 的网卡。
第一步：创建自动检测脚本 ~/.config/polybar/netinfo.sh（chmod +x）：
bash
#!/bin/bash
# 自动检测所有有全局 IPv4 的网络接口（优先有线 eth*，其次无线 wl*）
# 用法: netinfo.sh ip|up|down
MODE="$1"
IFACES=$(ip -4 -o addr show scope global 2>/dev/null | awk '{print $2}' | grep -E '^(eth|en)')
[ -z "$IFACES" ] && IFACES=$(ip -4 -o addr show scope global 2>/dev/null | awk '{print $2}' | grep -E '^(wl|wlan)')
case "$MODE" in
ip)
if [ -z "$IFACES" ]; then
echo "网线未连接"
else
# 每块活跃网卡都显示 "网卡名:完整IP"
OUT=""
for IFACE in $IFACES; do
IP=$(ip -4 -o addr show dev "$IFACE" scope global | awk '{print $4}' | cut -d/ -f1)
OUT="$OUT$IFACE:$IP "
done
echo "🌐 $OUT"
fi
;;
up|down)
[ -z "$IFACES" ] && exit 0
if [ "$MODE" = "up" ]; then F="tx_bytes"; SF="/tmp/.pb_tx_multi"
else F="rx_bytes"; SF="/tmp/.pb_rx_multi"; fi
# 汇总所有活跃接口的当前字节数，形如 "eth0:123 eth1:456"
CUR=""
for IFACE in $IFACES; do
C=$(cat "/sys/class/net/$IFACE/statistics/$F" 2>/dev/null) || continue
CUR="$CUR$IFACE:$C "
done
[ -z "${CUR// }" ] && exit 0
PREV=$(cat "$SF" 2>/dev/null)
echo "$CUR" > "$SF" 2>/dev/null
[ -z "$PREV" ] && exit 0
# 接口集合变化时（刚插拔网卡）跳过一次，避免差值错乱
PREV_SET=$(echo "$PREV" | tr ' ' '\n' | grep -v '^$' | cut -d: -f1 | sort | tr '\n' ' ')
CUR_SET=$(echo "$CUR" | tr ' ' '\n' | grep -v '^$' | cut -d: -f1 | sort | tr '\n' ' ')
[ "$PREV_SET" != "$CUR_SET" ] && exit 0
# 计算各接口差值合计（polybar 轮询间隔 3 秒）
DIFF=0
for pair in $CUR; do
IF=${pair%%:*}; C=${pair##*:}
PC=$(echo "$PREV" | tr ' ' '\n' | grep "^$IF:" | cut -d: -f2)
if [ -n "$PC" ]; then
D=$((C - PC)); [ "$D" -gt 0 ] && DIFF=$((DIFF + D))
fi
done
SPEED=$((DIFF / 3)); [ "$SPEED" -lt 0 ] && SPEED=0
if [ "$SPEED" -ge 1048576 ]; then
awk -v s="$SPEED" 'BEGIN{printf "%6.1f MiB/s", s/1048576}'
elif [ "$SPEED" -ge 1024 ]; then
awk -v s="$SPEED" 'BEGIN{printf "%6.1f KiB/s", s/1024}'
else
printf "%4d B/s" "$SPEED"
fi
;;
esac第二步：polybar 配置里三个网络模块全部改走脚本：
ini
[module/wired-network]
type = custom/script
exec = ~/.config/polybar/netinfo.sh ip
interval = 3.0
format-underline = #912CEE
label = %output%
label-foreground = ${colors.warning}
[module/eth-upload]
type = custom/script
exec = ~/.config/polybar/netinfo.sh up
interval = 3.0
format-underline = #FFE4E1
label = ↑ %output%
[module/eth-download]
type = custom/script
exec = ~/.config/polybar/netinfo.sh down
interval = 3.0
format-underline = #912CEE
label = ↓ %output%效果：
- 单网卡 →
🌐 eth0:10.10.10.131（网卡名 + 完整 IP） - 两块网卡同开 →
🌐 eth0:10.10.10.131 eth1:10.175.61.124（两块卡的完整 IP 都显示） - 断任何一块 → 自动显示剩下那块；全断才显示"网线未连接"
- ↑↓ 网速 = 所有活跃网卡的流量合计
坑 6b ：通过 SSH 远程重启 polybar 必须带
DISPLAY=:0，否则报
Can't parse display string直接退出：
bashexport DISPLAY=:0; setsid bash -c '~/.config/polybar/launch.sh' &
5.4 多网卡排障：接上了却一直没 IP
症状 ：VMware 里 eth0 显示"已连接"，但 ip addr 里 eth0 没有 inet 地址，
状态栏也不显示它。
排查链路（都是常见坑）：
bash
nmcli device status # 看 eth0 是"已连接"还是"已断开"
sudo journalctl -u NetworkManager -n 40 | grep eth0 # 看 DHCP 日志情况 A：NM 显示"已断开"且日志里 dhcp4 (eth0): state changed no lease
→ eth0 接的 VMware 虚拟网段里没有 DHCP 服务器 （常见于桥接到了
没 DHCP 的 VMnet，或宿主网络变了；也可能是 NAT 服务暂时抽风，稍后再连就好）。
解决：在 VMware 虚拟网络编辑器里修好该网段的 DHCP，或给 eth0 配静态 IP。
手动重试：nmcli connection up eth0-dhcp，成功后状态栏自动变双 IP 显示（如 .131 .124）。
情况 B：eth0 没有 connection profile，NM 每 10~20 秒后台重试一轮 DHCP
→ 日志里大量 eth0 记录。每次重试会短暂激活 eth0 抢路由，造成
系统周期性卡顿 （开终端慢、polybar 天气/诗词脚本 curl 卡超时等）。
止血：建一个 profile 并关掉自动重试：
bash
sudo nmcli connection add type ethernet ifname eth0 con-name eth0-dhcp autoconnect no
sudo nmcli device disconnect eth0
# 以后想用 eth0：nmcli connection up eth0-dhcp情况 C：只是不想用 eth0
→ 直接在 VMware 虚拟机设置里把第二块网卡的"已连接"勾掉，一了百了。
情况 D：新加了一块网卡但不显示 IP（或"断开一块另一块才能连"）
→ VMware 里"已连接"只是物理层接通，网卡层还差连接配置：
核心坑：多块网卡共用一份档案，NM 规则是"一份档案同一时间只能激活在一张网卡上"。
新网卡没有专属档案时会去抢别人的（如 Wired connection 1），
表现为"抢椅子"：谁先连上谁占住，其他卡显示"已断开"；
断开占住的那块，空出的档案立刻被另一块抢走------
这就是"断开 eth0 后 eth1 就能获取到 IP"的原因。
解决：给每块网卡建专属档案 （ifname 绑定网卡名，一人一把椅子）：
bash
sudo nmcli connection add type ethernet ifname eth2 con-name eth2-dhcp autoconnect yes
sudo nmcli connection up eth2-dhcp # 立即连接并 DHCP建好后用 nmcli -f NAME,DEVICE,AUTOCONNECT connection show 确认每张卡
都有自己的档案（DEVICE 列各归各，不再共用一个）。
如果 DHCP 拿不到地址，参考情况 A 检查该网卡接的 VMnet 有没有 DHCP。
状态栏的 netinfo.sh 会自动把所有拿到 IP 的网卡都显示出来
（如
🌐 eth0:10.10.10.131 eth1:10.175.61.124 eth2:10.10.10.133），网卡越多显示越长，1920 宽屏实测三卡不溢出。
5.5 图标字体（重要）
polybar 字体栈按顺序匹配，前面的字体没有的字形才会落到后面：
ini
font-0 = fixed:pixelsize=13;1
font-1 = unifont:fontformat=truetype:size=13:antialias=false;0
font-2 = Noto Sans Symbols2:style=Regular:size=13
font-3 = Font Awesome 5 Free Solid:size=13 ; 注意族名必须带 Solid，fc-match 实测 'Font Awesome 5 Free' 匹配不上
font-5 = DejaVu Sans:style=Bold:size=12
font-6 = Symbola:size=11 ; ← emoji 图标用这个
font-7 = Noto Color Emoji:size=10 ; 兜底坑 6 ：不要让 Noto Color Emoji 优先渲染 emoji！它是位图字体，
在 polybar 里不随字号缩放，🐏 🌐 会变成巨大的色块。
正确做法：安装
fonts-symbola（矢量单色、跟随字号），排在彩色 emoji 之前。注意 ↑↓、█░ 这类符号 DejaVu Sans 自带，不受影响。
5.6 今日诗词模块（daily-poem）怎么装
这个模块默认是注释掉的，原因是它有依赖坑：
- 下载二进制 ：上游开源项目 https://github.com/Yucklys/polybar-daily-poem （Rust 编译产出的单个可执行文件）
放到~/.config/polybar/scripts/daily-poem，然后chmod +x。 - 它依赖
libssl.so.1.1，而新版 Kali 只有libssl3，直接跑会报错。
解决办法是不动系统包，把 1.1 的库解包到私有目录：
bash
curl -sL -o /tmp/libssl11.deb \
http://security.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2.24_amd64.deb
mkdir -p ~/.config/polybar/scripts/libssl11
dpkg -x /tmp/libssl11.deb ~/.config/polybar/scripts/libssl11
# 验证
LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu \
~/.config/polybar/scripts/daily-poem --version-
在 config 的 hook 前加库路径前缀 （附录 A.2 的
[module/daily-poem]里已经是这个写法）：hook-0 = LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem require <你的token> ~/.config/polybar/scripts/poem.txt
-
token 到 https://v2.jinrishici.com/token 免费获取，替换掉
hook-0里的那串。 -
不想要这个模块：把
[bar/mybar]的modules-left里的daily-poem删掉即可，其它模块不受影响。
5.7 状态栏都有哪些模块（对照 A.2 看）
| 模块 | 类型 | 显示内容 | 备注 |
|---|---|---|---|
date |
internal/date | 日期时间 | |
i3 |
internal/i3 | 工作区 | |
title |
internal/xwindow | 当前窗口标题 | |
daily-poem |
custom/script | 今日诗词 | 见 5.6，可关 |
cpu |
internal/cpu | CPU xx% |
|
memory |
internal/memory | Mem xx% |
曾加过渐变条，为省空间去掉了 |
temperature |
internal/temperature | 温度 | 虚拟机可能显示 N/A |
wired-network |
custom/script | 多网卡 IP | netinfo.sh ip |
eth-upload/down |
custom/script | 上下行合计网速 | netinfo.sh up/down |
pulseaudio |
internal/pulseaudio | 音量/静音 | 滚轮可调，需 pulseaudio-utils |
backlight |
internal/backlight | 亮度 | 虚拟机无背光，可能不显示 |
battery |
internal/battery | 电池 | 台式机/虚拟机不显示 |
system-usb-udev |
custom/script | U 盘插拔 | 需 jq |
5.8 启动与排障
bash
# 前台启动看报错（最有用的一步）
DISPLAY=:0 polybar mybar -l info
# 后台启动（i3 自启里调的就是这个）
~/.config/polybar/launch.sh
# 重启状态栏
killall polybar; sleep 1; ~/.config/polybar/launch.sh坑 6b ：通过 SSH 远程重启 polybar 必须带
DISPLAY=:0，否则报
Can't parse display string直接退出。
第 6 步：rofi 启动器
6.0 文件与依赖
- 配置文件只有一个 ：
~/.config/rofi/config.rasi（附录 A.5，147 行） - 依赖：
rofi（2.0 及以上）、字体Fira Code、图标主题（papirus-icon-theme） - 键位：
Alt+d（见 A.1 的bindsym $mod+d）
bash
mkdir -p ~/.config/rofi
nano ~/.config/rofi/config.rasi # 粘贴附录 A.5 全文
rofi -show drun -theme ~/.config/rofi/config.rasi -show-icons # 直接试配置文件 ~/.config/rofi/config.rasi，网上主题很多（Base16 Material 等），但有几个大坑：
6.1 坑 7：rofi 2.0 不再自动加载 config.rasi！
这是"启动器看不清/主题不生效"的最大元凶 。rofi 1.x 会自动加载
~/.config/rofi/config.rasi，但 rofi 2.0 不会 ------无论你在里面写什么主题，
启动出来永远是 rofi 自带默认主题（蓝色高亮、窄窗口）。
解决：启动命令必须显式指定主题路径：
bindsym $mod+d exec --no-startup-id rofi -show drun -theme ~/.config/rofi/config.rasi -show-icons验证主题是否被加载：
bash
rofi -dump-theme | grep -i "你的主题特征色" # 有输出 = 加载成功
rofi -v # 先确认版本6.2 坑 8：rofi 的 8 位 hex 是 #AARRGGBB（透明度在前！）
rasi
window {
transparency: "real";
/* 错误写法：#263238CC 会被解析成透明度 0x26 ≈ 15%，面板几乎全透明 */
/* rgba() 写法虽比 8 位 hex 稳，但在 rofi 2.0 上仍可能出现"视觉上发透"的观感 */
background-color: rgba ( 38, 50, 56, 96 % );
}网上抄来的主题很多踩这个坑，表现为"面板看不清、文字和壁纸混在一起"。
最稳的做法：面板背景直接用 6 位实心色，不用任何透明度------
rasi
window {
transparency: "real";
background-color: #141A20; /* 实心深色，绝无透底 */
}验证是否真的不透明（像素级）：打开 rofi 后分别抓「窗口自身缓冲区」和「全屏」，同一位置采样应完全一致：
bash
WID=$(xdotool search --name "^rofi" | head -1)
import -window "$WID" /tmp/win.png; import -window root /tmp/root.png
convert /tmp/win.png -crop 1x1+380+300 -depth 8 txt: # 如 #141A20
convert /tmp/root.png -crop 1x1+959+429 -depth 8 txt: # 应为同一颜色6.3 坑 9：主题字体要确认已安装
主题常写 font: "Roboto Mono 13"，没装这个字体的话 rofi 会静默回退到文泉驿正黑，
显示又小又糊。用 fc-match "Roboto Mono" 查回退到了谁。本机装了 Fira Code 就写：
rasi
font: "Fira Code 14";6.4 图标
启动命令加 -show-icons：
bindsym $mod+d exec --no-startup-id rofi -show drun -theme ~/.config/rofi/config.rasi -show-icons6.5 最终采用的配色：Nord 柔和高对比
经过多轮"看不清/不舒服"的调优，最终定稿为 Nord 配色------实心深底 + 柔和高对比：
rasi
* {
bg: #2E3440; /* nord1 深蓝灰底（实心，无透明） */
bg-alt: #3B4252; /* nord2 选中行底色 */
fg: #ECEFF4; /* nord6 主文字，明亮清晰 */
fg-dim: #D8DEE9; /* nord4 次要文字 */
accent: #88C0D0; /* nord8 选中文字/高亮，冰蓝 */
border: #4C566A; /* nord10 边框 */
background-color: @bg;
text-color: @fg;
font: "Fira Code 13";
}
window {
width: 750px;
border: 2px;
border-color: @border;
border-radius: 10px;
background-color: @bg; /* 实心，绝不透底 */
}
element selected {
background-color: @bg-alt;
text-color: @accent;
}配色心得 ：与其追求"毛玻璃透明感"（在 rofi 2.0 上各种坑），不如用
Nord 这类"深底 + 冰蓝高亮"的实心方案------既柔和又绝不看不清。
第 7 步：konsole 终端
终端的样子由 konsole 自己的 profile 决定，跟 i3 配置无关。分三个层次：
| 层次 | 文件 | 管什么 | 全文 |
|---|---|---|---|
| 主配置 | ~/.config/konsolerc |
默认用哪个 profile、菜单栏隐藏、书签 | 附录 A.6 |
| 工具栏字体 | ~/.config/kdeglobals |
konsole 上方工具条的字号 | 附录 A.6b |
| 字体/字号/配色 | ~/.local/share/konsole/Profile 2.profile + *.colorscheme |
Fira Code Retina 12 号、Kali-Dark 配色 | 附录 A.7 / A.7b~e |
推荐 profile 设置：Fira Code Retina 12 号 + Kali-Dark 配色 + MenuBar=Disabled + 隐藏滚动条 + 无限回滚。
7.1 建文件
bash
mkdir -p ~/.local/share/konsole
# 按附录 A.6 / A.6b / A.7 / A.7b~e 建好对应文件（纯文本，直接粘贴保存）
konsole & # 打开看字体、配色、菜单栏对不对名字必须对上 ：
konsolerc里DefaultProfile=Profile 2.profile，所以
~/.local/share/konsole/下必须真有一个叫Profile 2.profile的文件；配色方案
ColorScheme=Kali-Dark也要求Kali-Dark.colorscheme存在。想做减法的话，最简单的做法是：先建一个 profile，再在 konsole 界面里选它当默认 ，
让 konsole 自己去写 konsolerc，比手改不容易错。
7.2 图形界面改法（等价操作）
konsole → 设置 → 编辑当前配置文件 → 外观（配色）/ 字体（Fira Code Retina，12 号）。
在界面里改完会自动写回上面这些文件，两种方式效果一样。
工具栏（"标题栏"）那行字不归 profile 管，在
~/.config/kdeglobals的
[General] toolBarFont=Noto Sans,9,...里（附录 A.6b）。想让工具条更小就改这个字号。
第 8 步：zsh + powerlevel10k
8.0 顺序（别打乱）
- 装包（第 1 步已含
zsh zsh-autosuggestions zsh-syntax-highlighting lolcat git curl） - 先装 zim 框架（powerlevel10k 主题在里面）
- 再放
~/.zshrc/~/.zimrc/~/.p10k.zsh三个文件（附录 A.8 / A.8b / A.8c） - 把 zsh 设为登录 shell
- 开新终端验证
bash
# ② 装 zim（powerlevel10k 主题包含在内）
curl -fsSL https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
# ③ 放本文的三个文件，并把里面的 /home/sirius 换成本机家目录
# （.zshrc / .zimrc / .p10k.zsh 见附录 A.8 / A.8b / A.8c）
sed -i "s|/home/sirius|$HOME|g" ~/.zshrc ~/.zimrc ~/.p10k.zsh
# ④ 设为默认 shell（重新登录生效）
chsh -s "$(which zsh)"8.1 提示符的两个常见问题
① 右侧出现一长串 ✓ user@主机名
那是右侧提示符里的 context 段。在 ~/.p10k.zsh 的
POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS 列表里把 context 那行注释掉，开新终端生效。
② 图标变成方块/问号
p10k 的图标依赖 Nerd Font：
bash
mkdir -p ~/.local/share/fonts
# 下载 MesloLGS NF 四个 ttf（p10k 官方推荐）后：
cp MesloLGS*.ttf ~/.local/share/fonts/ && fc-cache -f ~/.local/share/fonts
# 然后 konsole → 设置 → 编辑当前配置文件 → 字体改为 "MesloLGS NF"不想折腾字体也行：跑 p10k configure 选 ASCII/无图标样式，重新生成一份 ~/.p10k.zsh。
第 9 步：壁纸与登录
9.1 设壁纸
bash
# 把壁纸放到统一位置（第 2 步已建好目录）
cp 你的壁纸.jpg ~/Pictures/wallpapers/wall.jpg
# 用 feh 设置，并让它写入 ~/.fehbg（下次登录自动恢复）
feh --bg-fill ~/Pictures/wallpapers/wall.jpg
# 确认生成了自启脚本
cat ~/.fehbgi3 配置里已有
exec_always feh --randomize --bg-fill ...（见 3.5 改路径），所以每次登录都会重设一次壁纸------两条路任选其一，都行，但路径要对。
9.2 登录默认进 i3（保留 Xfce 备用）
bash
# ① 确认 i3 会话已注册
ls /usr/share/xsessions/ # 应能看到 i3.desktop
# ② 把默认会话设成 i3（不用改 lightdm 全局配置）
printf "[Desktop]\nSession=i3\n" > ~/.dmrc注销后默认进 i3。想临时回 Xfce：在登录界面输入密码前，点右上角/齿轮图标切换会话。
第 10 步：重启验收与排障
10.1 重启前自检
bash
# 1) i3 语法
i3 -C -c ~/.config/i3/config && echo "i3 OK"
# 2) 脚本可执行位
ls -l ~/.config/i3/scripts/*.sh ~/.config/polybar/*.sh ~/.config/polybar/scripts/*.sh
# 3) 检查示例路径是否都已替换（应该没有输出）
grep -rn "/home/sirius" ~/.config ~/.zshrc ~/.zimrc ~/.p10k.zsh ~/.fehbg 2>/dev/null
# 4) 关键字体
fc-match "Font Awesome 5 Free Solid"; fc-match "Symbola"; fc-match "Fira Code"10.2 逐项验收（重启登录后照着打勾）
| # | 检查什么 | 怎么做 | 正常表现 |
|---|---|---|---|
| 1 | 进到 i3 了吗 | 登录后看顶部 | 有状态栏，无 Xfce 面板 |
| 2 | 壁纸 | 看桌面 | 你设的那张图 |
| 3 | 状态栏起来了 | pgrep -a polybar |
有 polybar mybar 进程 |
| 4 | 工作区 | Alt+1 / Alt+2 |
左上角数字变化 |
| 5 | 终端 | Alt+Enter |
弹出 konsole，Fira Code 字体 |
| 6 | 启动器 | Alt+d |
rofi 深蓝面板 + 图标 |
| 7 | 提示符 | 新开终端 | 分段提示符（不是 $） |
| 8 | CPU/内存 | 看状态栏 | 有百分比在动 |
| 9 | 网卡 IP | 看状态栏 | 🌐 eth0:192.168.x.x |
| 10 | 网速 | 下点东西 | ↑↓ 数值跳动 |
| 11 | 音量键 | 按音量+/− | 数字变化，最大 100% |
| 12 | 静音 | 按键盘静音键（XF86AudioMute） | 状态栏显示"静音" |
| 13 | 锁屏 | Alt+l |
模糊背景 + 大时钟 + 圆环 |
| 14 | 解锁 | 输密码回车 | 回到桌面 |
| 15 | 通知 | notify-send 测试 |
右上角弹窗 |
| 16 | 截图 | scrot ~/t.png |
生成图片文件 |
| 17 | 剪贴板 | pgrep -a copyq / 托盘图标 |
有 copyq 进程与图标 |
| 18 | 自动锁屏 | 等 10 分钟 | 自动锁（xautolock） |
| 19 | 浏览器 | Alt+Shift+g |
Chrome 打开（装了的） |
| 20 | 注销/关机 | Alt+Shift+Ctrl+q |
弹出 l/e/r/o 菜单 |
哪一项不对，直接跳到 排错手册 对号入座。
10.3 无头冒烟测试（不敢直接注销时用）
在 SSH 里也能验证"桌面能不能起来"，不影响你当前的图形会话：
bash
cat > /tmp/smoke.sh <<'EOF'
#!/bin/bash
export DISPLAY=:99
pkill -f "Xvfb :99"; sleep 1
Xvfb :99 -screen 0 1920x1080x24 &
sleep 2
i3 -c ~/.config/i3/config &
sleep 4
konsole -e zsh &
sleep 6
import -window root /tmp/i3test.png
killall konsole i3 polybar feh dunst xcompmgr 2>/dev/null
pkill -f "Xvfb :99"
EOF
chmod +x /tmp/smoke.sh && /tmp/smoke.sh把 /tmp/i3test.png 拿回本地看：壁纸、状态栏、终端一目了然。
坑 9 ：测试 zsh 提示符必须用交互式 zsh（
konsole -e zsh），
zsh -c "..."不加载.zshrc，提示符不会渲染。
坑 10 ：polybar 的温度/电池/背光/无线模块在没有对应硬件的虚拟机里会自动禁用，日志里有 warning 属正常。
10.4 起不来 / 黑屏 / 只有鼠标怎么办
| 现象 | 先查这个 |
|---|---|
| 登录后一片黑，只有鼠标 | i3 配置语法错 → i3 -C -c ~/.config/i3/config |
| 桌面起了但顶栏没有 | DISPLAY=:0 polybar mybar -l info 看报错 |
| 顶栏有但图标全方块 | 字体族名不对 → 第 2 步 2.3 |
| 终端一闪就退 | .zshrc 里某条命令失败 → `zsh -x -c exit 2>&1 |
| 所有快捷键都没反应 | 修饰键不是 Alt（set $mod Mod1），或 i3 没加载新配置 |
| 音量键无反应 | 没装 pulseaudio-utils（坑 17） |
Alt+l 没反应 |
i3lockr 不存在或没 chmod（坑 18） |
日志位置：
bash
~/.local/share/xorg/Xorg.0.log # X 层
journalctl -b -p err # 本次启动的所有错误
~/.xsession-errors # 会话级报错（部分系统有）排错手册（坑 1~19）
| # | 现象 | 原因 | 解决 |
|---|---|---|---|
| 1 | apt 下载卡住 | 镜像 IPv6 不通 | 加 -o Acquire::ForceIPv4=true |
| 2 | nitrogen 装不上 | 新版 Kali 已移除 | 壁纸用 feh，认证用 lxpolkit |
| 3 | neofetch 不存在 | 已移除 | 用 fastfetch |
| 4 | i3 边框变亮绿色 | client 颜色只写 4 位，child_border 回退 | 5 个颜色位全部显式写 |
| 5 | 内存总量显示错误 | 教程写死 /16GiB | 用 %gb_total% 动态取值 |
| 6 | 🐏🌐 图标巨大 | Noto Color Emoji 位图不缩放 | 装 fonts-symbola 排前面 |
| 7 | rofi 主题不生效 | rofi 2.0 不自动加载 config.rasi | 启动命令加 -theme ~/.config/rofi/config.rasi |
| 8 | rofi 字体又小又糊 | 主题字体未安装，静默回退 | 换成已装字体并 fc-match 验证 |
| 9 | 提示符测试不显示 | zsh -c 非交互不加载 .zshrc | 用交互式 zsh 测试 |
| 10 | 提示符右侧长串 | p10k context 段 | 注释 RIGHT_PROMPT_ELEMENTS 里 context |
| 11 | scp 文件互相覆盖 | 同名文件 | 改名或分次传输 |
| 12 | rofi 面板全透明 | 8 位 hex 被按 #AARRGGBB 解析 | 用 rgba ( r, g, b, N % ) 或实心色 |
| 13 | 断一块网卡显示"未连接" | polybar interface 写死 eth0 |
改用 netinfo.sh 脚本模块自动检测（见 5.3） |
| 14 | SSH 重启 polybar 失败 | 缺 DISPLAY 环境变量 | export DISPLAY=:0 后再启动 |
| 15 | ne 命令不存在 |
旧 alias 引用已移除的 neofetch | 改成 `alias ne="fastfetch |
| 16 | 快捷键进入某模式没反应 | mode "$变量" 但变量没 set 定义（空模式） |
先 set $mode_system System (l) lock, (e) exit, (r) reboot, (o) shutdown 再绑定 |
| 17 | 音量键/调音量没反应 | i3 默认绑定调 pactl，但 pulseaudio-utils 没装 |
sudo apt install pulseaudio-utils；键盘音量键、顶栏 🔊 滚轮、pactl set-sink-volume @DEFAULT_SINK@ +10% 均可 |
| 18 | 锁屏（mod+l / 自动锁屏）没反应 | i3lockr 不在 Kali 仓库，需要自建；且 i3lock-fancy 在 ImageMagick 7 下字体解析有 bug（convert 报 unable to load font 后直接退出） |
sudo apt install scrot，建 /usr/local/bin/i3lockr 替身：scrot -z 截屏 → convert 高斯模糊 + 暗化 + 提示文字 → i3lock-color 常显时钟 + 常显大圆环 + 中文验证提示（v10 完整脚本见下） |
| 19 | 状态栏音量显示 2350% 之类的天文数字 | pactl set-sink-volume +10% 允许超过 100%，按住音量+键自动重复就一路加到几千 %；超过 100% 会严重削波失真 |
加音量改用带 100% 上限的脚本 ~/.config/i3/scripts/volup.sh（完整脚本见下），i3 绑定改为调用脚本 |
坑 18 的完整替身脚本 v10（逐行注释版） ------/usr/local/bin/i3lockr
效果：模糊暗化背景 + 常显大字时钟（每秒刷新）+ 常显 Nord 青色圆环 + 中文"验证中/密码错误"提示；输密码变亮、退格变黄、输错变红。
第一步，安装 i3lock-color（每条命令的作用）：
sh
# 从 Kali 官方镜像下载 deb 包（东软镜像 DNS 抽风时的绕法）
# -f 下载失败时报错返回非 0（不把错误页存成文件）
# -s 静默模式（不显示进度条）
# -S 配合 -s，出错时仍然把错误打到 stderr
# -L 跟随重定向（http.kali.org 是个跳转服务，会 302 到真实镜像）
curl -fsSL -o /tmp/i3lock-color.deb "http://http.kali.org/kali/pool/main/i/i3lock-color/i3lock-color_2.13.c.5-0kali1_amd64.deb"
# 只解包、不安装：dpkg-deb -x 把包里的文件释放到指定目录
# 不走 dpkg -i 是因为 i3lock-color 与已装的 i3lock 包冲突（Conflicts），
# 解包方式完全不动系统包数据库，最干净
sudo dpkg-deb -x /tmp/i3lock-color.deb /tmp/i3lc
# 包里的二进制叫 i3lock，复制出来改名 i3lock-color，放到 /usr/local/bin（在 PATH 里，且不覆盖系统的 /usr/bin/i3lock）
sudo cp /tmp/i3lc/usr/bin/i3lock /usr/local/bin/i3lock-color
# 加执行权限并清理临时文件
sudo chmod +x /usr/local/bin/i3lock-color && rm -rf /tmp/i3lc /tmp/i3lock-color.deb密码验证走 PAM，用的是系统 i3lock 已有的
/etc/pam.d/i3lock，所以解包安装不需要额外配置认证。
第二步，创建 /usr/local/bin/i3lockr（chmod +x）。全文每一段、每个参数都有注释：
bash
#!/bin/bash
# ============================================================
# i3lockr 替身 v10 ------ 锁屏美化脚本
# 流程：截屏 → 高斯模糊 → 暗化 → 叠加提示文字 → i3lock-color 上锁
# 效果：模糊暗化背景 + 常显大字时钟(每秒刷新) + 常显 Nord 青色圆环
# + 中文"验证中/密码错误"提示；输密码变亮、退格变黄、输错变红
# ============================================================
# --- ① 选定锁屏程序 -----------------------------------------
# 优先用 i3lock-color（支持时钟/圆环配色），没装则退回系统 i3lock（少美化但功能不缺）
LOCK=/usr/local/bin/i3lock-color
command -v $LOCK >/dev/null 2>&1 || LOCK=i3lock
# --- ② 生成唯一临时文件路径 ----------------------------------
# mktemp 生成 /tmp/lock.XXXXXX 形式的随机名，后面补 .png 后缀；
# 用随机名避免多用户/多次锁屏互相覆盖
IMG=$(mktemp /tmp/lock.XXXXXX).png
# --- ③ 截取当前屏幕 ------------------------------------------
# scrot -z：-z 表示等屏幕空闲再截（避免截到残影）
# 截屏失败（如无 X 权限）就退化为纯黑锁屏，保证功能不中断
scrot -z "$IMG" || { $LOCK -c 000000 -e; exit 0; }
# --- ④ 准备字体和分辨率 ---------------------------------------
# 中文用文泉驿微米黑（Kali 自带）；换字体改这一行即可
FONT=/usr/share/fonts/truetype/wqy/wqy-microhei.ttc
# identify(ImageMagick) 取截图分辨率，格式 "宽x高"；取不到就按 1920x1080 兜底
SIZE=$(identify -format "%wx%h" "$IMG" 2>/dev/null) || SIZE=1920x1080
# 把 "1918x878" 拆成 W=1918、H=878（%x* 截掉 x 之后的内容，#*x 截掉 x 之前的内容）
W=${SIZE%x*}; H=${SIZE#*x}
# --- ⑤ 高斯模糊背景 -------------------------------------------
# 原理：先缩小到 20%（细节自然糊掉）再放大回原尺寸，比直接大半径模糊快得多
convert "$IMG" \
-filter Gaussian \
-resize 20% \
-define filter:sigma=1.5 \
-resize 500.5% \
-level 0%,100%,0.6 \
"$IMG" || true
# ↑ 参数解释：
# -filter Gaussian 用高斯滤波器（比默认滤波更柔和自然）
# -resize 20% 缩小到 20%，细节在这一步糊掉
# -define filter:sigma=1.5 缩放时的高斯强度 1.5
# -resize 500.5% 放大回原尺寸（500.5% 是 i3lock-fancy 的祖传写法）
# -level 0%,100%,0.6 轻微压对比度，让后面的文字更突出
# || true 就算失败也不中断脚本
# --- ⑥ 暗化 + 叠加静态提示文字 ----------------------------------
# 只把"输入密码解锁"烤进图里（它永远不变）；
# 时间/日期是会走的，必须交给 i3lock-color 实时画，不能烤进静态图！
convert "$IMG" \
-fill black -colorize 35% \
-font "$FONT" \
-pointsize $((H/36)) \
-fill "#DDDDDD" \
-gravity center \
-annotate +0+$((H/5)) "输入密码解锁" \
"$IMG" || true
# ↑ 参数解释：
# -fill black -colorize 35% 整体压暗 35%（数字越大越暗），突出前景
# -font "$FONT" 后面文字用文泉驿微米黑
# -pointsize $((H/36)) 字号随屏幕高度自适应（878px 屏 ≈ 24px）
# -fill "#DDDDDD" 文字颜色浅灰
# -gravity center 坐标系以屏幕中心为原点
# -annotate +0+H/5 "文字" 在中心下方 H/5（≈175px）处画字
# --- ⑦ 组装 i3lock-color 参数（用数组才能每行带注释） ------------
ARGS=(
# 显示控制：
--indicator # 圆环常显（默认要按键盘才出现，缺了锁屏是空白）
--force-clock # 时钟常显（默认显示提示文字时会把时钟藏起来）
# 圆环形状：
--radius=$((H/11)) # 圆环半径，随分辨率自适应（878px 屏 ≈ 80px）
--ring-width=8 # 圆环线条粗细（像素）
# 圆环配色（8 位 RRGGBBAA，最后两位是透明度 FF=不透明）：
--inside-color=00000055 # 环内填充：黑色半透明
--ring-color=88C0D0FF # 平时圆环：Nord 青
--insidever-color=88C0D088 # 正在验证时环内：青半透明
--ringver-color=A3E7FCFF # 正在验证时圆环：亮青
--insidewrong-color=BF616A88 # 密码错误时环内：红半透明
--ringwrong-color=BF616AFF # 密码错误时圆环：正红
--keyhl-color=88C0D0CC # 输密码时环内小点亮起：青
--bshl-color=EBCB8BCC # 按退格键时小点亮起：黄
--separator-color=00000000 # 分隔线：全透明（隐藏）
--line-color=00000000 # 失败计数横线：全透明（隐藏）
# 验证/错误提示文字（中文）：
--verif-text="验证中" # 正在验证时显示的字（不要带省略号，会光学偏左）
--wrong-text="密码错误" # 密码错误时显示的字
--verif-color=FFFFFFFF # 提示文字颜色：白
--wrong-color=FFFFFFFF
--verif-size=$((H/32)) # 提示字号（878px 屏 ≈ 27px）
--wrong-size=$((H/32))
--verif-font="WenQuanYi Micro Hei" # 中文字体（fontconfig 名称）
--wrong-font="WenQuanYi Micro Hei"
# 实时时钟（每秒刷新；这些字会变，所以不能烤进背景图）：
--clock # 开启时钟
--time-str="%H:%M" # 时间格式：时:分（strftime 语法）
--time-pos="x+w/2:y+h/2-240" # 位置：水平中点、屏幕中心上方 240px
--time-size=$((H/10)) # 时间字号（878px 屏 ≈ 87px，大字）
--time-font="WenQuanYi Micro Hei"
--time-color=FFFFFFFF # 时间颜色：白
--date-str="%Y年%m月%d日 %A" # 日期格式：%A 按系统语言显示"星期日"
--date-pos="x+w/2:y+h/2-130" # 位置：水平中点、屏幕中心上方 130px
--date-size=$((H/32)) # 日期字号（≈ 27px）
--date-font="WenQuanYi Micro Hei"
--date-color=FFFFFFFF # 日期颜色：白
)
# 注意：--time-pos/--date-pos 不支持负数写法！写 "0:-219" 时间会整个不渲染。
# 必须用变量表达式：x/y=屏幕左上角坐标 w/h=分辨率 r=圆环半径
# 例如 "x+w/2:y+h/2-240" = 水平居中、垂直中心上方 240px
# --- ⑧ 上锁 ---------------------------------------------------
# -i 指定背景图；-e 忽略空密码（直接回车不解锁）
# 故意不用 -f/--show-failed-attempts：失败次数数字在这版里位置固定、不对齐圆心
$LOCK -i "$IMG" -e "${ARGS[@]}"
# --- ⑨ 清理临时截图 -------------------------------------------
rm -f "$IMG"脚本里的三个关键坑 （配不好时先查这三条）：
① i3lock-color 的圆环默认只在按键盘后才显示 ，时钟跟着指示器走------不加
--indicator+--force-clock，锁屏画面就是一片空白；②
--time-pos不支持负数偏移 ，写0:-219时间会整个不渲染，必须用
x+w/2:y+h/2-240这种变量表达式；③ 不用
-f显示失败次数------这版 fork 里那个数字位置固定、不对齐圆心。为什么时间不能用 ImageMagick 写进背景图 ：背景图是锁屏瞬间生成的静态 PNG，
写进去就永远停在那个时刻，所以会变的时间/日期必须交给
--force-clock实时绘制。调参速查 ：暗化程度改
-colorize 35%；圆环大小改--radius=$((H/11))分母；时间/日期位置改
--time-pos/--date-pos的 y 减数（240/130）；字号改
--time-size/--date-size；提示文字内容改--verif-text/--wrong-text。测试锁屏的教训 ：i3lock 会忽略 SIGTERM （防绕过设计），不要用
timeout远程试锁------锁上就解不开，只能
sudo pkill -9 i3lock救援。验证参数合法性的安全方法：
DISPLAY="" 命令...空跑，报 "Could not connect to X11" 说明参数全部通过。解锁方式：输入登录密码回车；圆环变红 = 密码不对。
坑 19 的音量上限脚本（逐行注释版）：
~/.config/i3/scripts/volup.sh（chmod +x）------步进 10%，封顶 100%：
sh
#!/bin/sh
# ============================================================
# volup.sh ------ 加大音量：步进 10%，封顶 100%
# 为什么封顶：pactl 允许音量超过 100%（按住键能冲到几千 %），
# 超过 100% 是硬放大信号，会削波失真还伤耳朵
# ============================================================
# pactl 要和当前用户的 PulseAudio 服务通信，
# 从脚本/SSH 调用时没有这个环境变量会报错，手动指明运行时目录
export XDG_RUNTIME_DIR=/run/user/$(id -u)
# 读取当前音量数值。pactl 的输出长这样：
# Volume: front-left: 32768 / 50% / -18.06 dB, front-right: ...
# head -1 取第一行（丢弃 balance 行）
# grep -o "[0-9]*%" 抠出 "50%" 这样的百分比片段（第一个=左声道）
# tr -d "%" 去掉百分号，得到纯数字 50
V=$(pactl get-sink-volume @DEFAULT_SINK@ | head -1 | grep -o "[0-9]*%" | head -1 | tr -d "%")
# 读不到音量（服务没响应等）就直接退出，不做任何操作
[ -z "$V" ] && exit 0
# 91% 以上再加 10% 会冲过 100%，直接精确设到 100% 封顶
if [ "$V" -ge 91 ]; then
pactl set-sink-volume @DEFAULT_SINK@ 100%
else
# 正常情况：步进 +10%
pactl set-sink-volume @DEFAULT_SINK@ +10%
fi~/.config/i3/scripts/voldown.sh（chmod +x）------降低音量（0% 是天然下限，无需保护）：
sh
#!/bin/sh
# ============================================================
# voldown.sh ------ 降低音量：步进 10%
# 0% 是天然下限，不需要保护逻辑
# ============================================================
# 同 volup.sh：脚本环境需要手动指明 PulseAudio 运行时目录
export XDG_RUNTIME_DIR=/run/user/$(id -u)
# @DEFAULT_SINK@ = 当前默认输出设备（扬声器/耳机自动跟随）
pactl set-sink-volume @DEFAULT_SINK@ -10%i3 绑定相应改为（--no-startup-id 告诉 i3 这不是启动器程序、不用显示启动沙漏光标）：
i3
bindsym XF86AudioRaiseVolume exec --no-startup-id ~/.config/i3/scripts/volup.sh
bindsym XF86AudioLowerVolume exec --no-startup-id ~/.config/i3/scripts/voldown.sh如果音量已经冲到几百上千 %，直接
pactl set-sink-volume @DEFAULT_SINK@ 50%拉回来即可。
日常使用速查（$mod = Alt）
| 快捷键 | 功能 |
|---|---|
Alt+Enter |
打开终端 |
Alt+d |
rofi 启动器 |
Alt+Shift+a |
程序启动器（备用键位） |
Alt+m / Alt+Shift+m |
启动 / 关闭状态栏 |
Alt+Shift+c / Alt+Shift+r |
重载配置 / 重启 i3 |
Alt+1..9 |
切换工作区 |
Alt+Shift+1..9 |
窗口移到工作区 |
Alt+h/j/k/l 方向键 |
切换焦点窗口 |
Alt+v / Alt+h（布局） |
垂直 / 水平分割 |
Alt+f |
全屏 |
Alt+Shift+q |
关闭窗口 |
Alt+Shift+Ctrl+q → l/e/r/o |
锁屏 / 退出 / 重启 / 关机 |
Alt+z / Alt+Shift+g |
文件管理器 / 浏览器 |
改完任何配置：i3 配置用 Alt+Shift+c 重载；polybar 用 Alt+Shift+m 再 Alt+m；
zsh/p10k 开新终端；rofi 每次启动自动读最新配置。
可选：Sirius 工具箱（第三方工具启动面板）
本章不影响桌面本身，只是把一个多工具图形启动面板接到 i3 上。不需要就整章跳过。
工具箱本体在 ~/.linux版/，结构如下：
~/.linux版/
├── cs2.py # ttkbootstrap 图形启动器（工具按钮都在这里注册）
├── config.py # 每个工具的启动命令定义
├── start.sh # 工具箱启动入口
├── img/ # 工具图标（png）
└── storage/ # 所有工具的存放地（每个工具一个目录）
├── afrog/
├── ARDM/
├── shiro_attack/
└── ...14.1 添加新工具（接入 GUI 界面，3 步）
假设要加一个叫 MyTool 的新工具：
第 1 步：把工具放进 storage
~/.linux版/storage/MyTool/
├── 工具本体
└── linux_start.sh # 启动脚本（惯例命名）linux_start.sh 模板（记得 chmod +x）：
bash
#!/bin/bash
current_dir=$(dirname "$0")
cd $current_dir
konsole -e bash -c './你的命令 ; exec /bin/zsh' # 终端类工具（要包 konsole 才能看到输出）
# 或
./程序名 # GUI 程序（如 java -jar xx.jar）第 2 步：config.py 里加启动函数
python
def MyTool():
subprocess.Popen(f"{DOWNLOAD_THE_CURRENT_DIRECTORY}MyTool/linux_start.sh", shell=True)第 3 步：cs2.py 里注册按钮（照抄现有工具的代码块格式）：
python
# ------------------------------MyTool---------------------------------
position = [2, 3] # 分类面板里的位置（行,列），别和现有工具重叠
Tool_Introduction = """工具功能简介（鼠标悬停显示）"""
Tool_Name = "MyTool"
Updatecheck = "v1.0版本"
run = config.MyTool # 对应 config.py 里的函数名
MyImage = ImageTk.PhotoImage(Image.open(f"./img/MyTool.png").resize((SIZE, SIZE)))
Whether_to_download_or_not().mian(Frame_Information_collection_class, Tool_Name,
Tool_Introduction, Updatecheck, MyImage, run, position)注意最后的
Frame_XXX_class参数决定按钮出现在哪个分类页（信息收集/漏洞利用等），抄哪个现有工具的块就落在哪个分类里。
三个易踩的坑：
- 图标必须存在 ：
img/MyTool.png没有就启动器崩溃------找一张 png 放进去，或借用工具目录里自带的图标 - position 别与现有工具重叠，否则按钮叠在一起
- 终端类工具必须
konsole -e包一层，否则双击启动后后台运行、看不到输出
14.2 最简方式（不改代码）
工具丢进 storage/ 后不接 GUI，用时终端里：
bash
cd ~/.linux版/storage/MyTool && ./linux_start.sh14.3 更新已有工具
开源活跃工具（afrog / ARDM / shiro_attack / dirsearch 等）去 GitHub 下载最新
release 替换 storage/ 下对应目录即可，注意：
- 启动脚本
linux_start.sh里如果写死了 jar/AppImage 文件名 ，替换后要同步改
| | |
| --- | --- | - 字典类数据（如 shiro 的 key 字典）建议新旧合并去重 再覆盖：
cat 旧 新 | sort -u > 合并 - 闭源工具（LiqunKit、burp_loader、CS 系列）没有正规更新渠道，等上游发布
- 替换前把旧版备份到
storage/_backup_old/，新版有问题随时回滚
14.4 已更新的版本记录（2026-11）
| 工具 | 版本 |
|---|---|
| afrog | 3.5.9（首次运行自动拉最新 PoC 库到 ~/.config/afrog/pocs） |
| ARDM（Redis 客户端） | 1.7.4 AppImage |
| shiro_attack | 5.1.1（zulu-8-jfx.jar，key 字典已合并 2317 条） |
| dirsearch | 0.5.0（master 分支替换） |
附录 A：完整配置文件全文
下面是每个文件的完整原件 ，与正文讲述的内容完全一致。
按下方表格把内容保存到对应路径即可，一字不改也能直接用。
daily-poem（今日诗词模块） ：上游开源项目 https://github.com/Yucklys/polybar-daily-poem
（Rust 编译的二进制）。它依赖 libssl.so.1.1，新版 Kali 只有 libssl3 会报错 ------
这就是它默认被注释掉的原因。解决办法：
① 从 Ubuntu 归档下载 libssl1.1 deb 并
dpkg -x解包到
~/.config/polybar/scripts/libssl11/（不动系统包）：
bashcurl -sL -o /tmp/libssl11.deb http://security.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2.24_amd64.deb mkdir -p ~/.config/polybar/scripts/libssl11 dpkg -x /tmp/libssl11.deb ~/.config/polybar/scripts/libssl11② polybar config 里 hook 命令前加库路径前缀：
LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem ...（A.2 的 polybar 全文里已是此写法）
token 到 https://v2.jinrishici.com/token 获取，hook-0 里替换即可。
| 文件 | 保存到（家目录下） | 说明 |
|---|---|---|
.config/i3/config |
同名 | i3 主配置（含全部快捷键、mode_system 等 322 行完整版） |
.config/polybar/config |
同名 | polybar 完整主配置（837 行，含全部模块） |
.config/polybar/launch.sh |
同名 | 启动脚本，记得 chmod +x |
.config/polybar/scripts/ |
同名 | 天气、USB 监控、hackspeed 脚本 + poem.txt（都要 chmod +x）；daily-poem 二进制从 GitHub 下载（见上方说明） |
.config/rofi/config.rasi |
同名 | rofi Nord 主题完整版（147 行） |
.config/konsolerc |
同名 | konsole 主配置 |
.local/share/konsole/ |
同名 | konsole 全部 profile 和配色方案（含书签） |
.zshrc / .zimrc |
同名 | zsh 配置（里面的 /home/sirius 要替换成你的用户名） |
.p10k.zsh |
同名 | powerlevel10k 提示符完整配置（1826 行完整版见 A.8；也可以跑 p10k configure 重新生成一份） |
.fehbg |
同名 | 壁纸自启脚本（里面写死了壁纸路径，换壁纸后重新 feh --bg-scale 生成即可） |
.dmrc |
同名 | 默认会话 = i3 |
.config/i3/scripts/volup.sh / voldown.sh |
同名 | 音量脚本（全文在第 4 步 4.2 / 4.3，记得 chmod +x） |
/usr/local/bin/i3lockr |
同绝对路径 | 锁屏脚本（全文在排错手册坑 18，记得 chmod +x） |
保存后的检查清单：
bash
# 1. 把示例用户名替换成你自己的用户名
grep -rln "/home/sirius" ~/.config ~/.zshrc ~/.zimrc ~/.p10k.zsh ~/.fehbg 2>/dev/null | \
xargs -r sed -i "s|/home/sirius|$HOME|g"
# 2. 执行权限
chmod +x ~/.config/polybar/launch.sh ~/.config/polybar/scripts/*.sh
# 3. 校验并启动
i3 -C -c ~/.config/i3/config && echo 通过提醒：以后改动桌面配置时，记得同步更新本附录里的对应全文，保持附录与实际文件一致。
下面是各文件的完整全文（A.1、A.2... 与上表一一对应）：
A.1 i3 主配置（完整版）
.config/i3/config（322 行）
ini
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#
# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod1
# #设置窗口边框等等
new_window pixel 2
new_float normal
hide_edge_borders both
#设置窗口间距
gaps inner 12
#gaps outer 6
# 窗户颜色
# 定义的参数，就和变量一样
set $bg-color #2f343f #$bg-color就定于#2f343f
set $inactive-bg-color #2f343f
set $text-color #f3f4f5
set $inactive-text-color #676E7D
set $urgent-bg-color #E53935
set $focus-border #2bcec2
set $inactive-border #3b4252
# 窗口装饰
# 边框 背景 文本 指标 子边框(pixel模式实际显示)
client.focused $focus-border $bg-color $text-color $focus-border $focus-border
client.unfocused $inactive-border $inactive-bg-color $inactive-text-color $inactive-border $inactive-border
client.focused_inactive $inactive-border $inactive-bg-color $inactive-text-color $inactive-border $inactive-border
client.urgent $urgent-bg-color $urgent-bg-color $text-color $urgent-bg-color $urgent-bg-color
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:Bitstream Vera Sans Mono 11
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8
# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.
# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
##==========================================自己配置 自启动=================================================================================================
# ======================================================================================================================================================
#exec --no-startup-id mate-power-manager #电池托盘
exec --no-startup-id blueman-applet #蓝牙托盘
#exec --no-startup-id variety #壁纸
exec --no-startup-id lxpolkit # 身份认证
# 设置vm
exec --no-startup-id vmware-user-suid-wrapper
# 自带锁屏
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lockr --blur 60
# 启动utools
exec --no-startup-id /usr/bin/utools
exec_always feh --randomize --bg-fill 图片/壁纸/浏览器/20230827170427.jpg
# 剪切板管理
exec --no-startup-id copyq
exec --no-startup-id nm-applet
#启动polybar
exec --no-startup-id ~/.config/polybar/launch.sh
# 透明
exec --no-startup-id xcompmgr
#exec --no-startup-id /opt/apps/com.baidu.fcitx-baidupinyin/files/bin/bd-qimpanel.watchdog.sh # 启动百度输入法
exec --no-startup-id dunst # dunst系统通知
# 无操作10分钟自动锁屏
exec --no-startup-id xautolock -time 10000 -locker i3lockr --blur 60
# ======================================================================================================================================================
# ======================================================================================================================================================
# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id ~/.config/i3/scripts/volup.sh
bindsym XF86AudioLowerVolume exec --no-startup-id ~/.config/i3/scripts/voldown.sh
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
##====================================自己配置 快捷键==============================================
#bindsym $mod+n exec --no-startup-id netease-cloud-music # 网易云音乐
bindsym $mod+Shift+g exec google-chrome # 谷歌浏览器
bindsym $mod+z exec nautilus # 文件管理器
bindsym $mod+Return exec konsole #打开终端
bindsym $mod+l exec --no-startup-id i3lockr --blur 60 # 手动锁屏
bindsym $mod+d exec --no-startup-id rofi -show drun -theme ~/.config/rofi/config.rasi -show-icons
# 杀死 polybar
bindsym $mod+Shift+m exec killall polybar
# 启动polybar
bindsym $mod+m exec ~/.config/polybar/launch.sh --shapes
# 壁纸设置
bindsym $mod+Ctrl+1 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/16e97308c2e942a28c68afb22a36023b.jpg
bindsym $mod+Ctrl+2 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/792a4b6934fc491b81342206e3192e59.png
bindsym $mod+Ctrl+3 exec feh --randomize --bg-fill ~/图片/壁纸/20200605013054948.jpg.2560.1440.jpg
bindsym $mod+Ctrl+4 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/21e8398470f1486583e548fe8db26d24.jpg
bindsym $mod+Ctrl+5 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/4yxdxk.png
bindsym $mod+Ctrl+6 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/5wxyp1.png
bindsym $mod+Ctrl+7 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/43vvmv.jpg
bindsym $mod+Ctrl+8 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/45d2y5.jpg
bindsym $mod+Ctrl+9 exec feh --randomize --bg-fill ~/图片/壁纸/浏览器/20200509060837255.jpg
bindsym $mod+Ctrl+0 exec feh --randomize --bg-fill ~/图片/2021-11-14_11-05.jpg
#---------显示标题栏---------
# 有边框和标题栏
bindsym $mod+n border normal
# 无边框和标题栏
bindsym $mod+u border none
# 1像素边框
bindsym $mod+o border pixel 3
# 可在上面三种风格来回切换
bindsym $mod+b border toggle
#---------------------------
#----------隐藏窗口----------
# 按$mod+-隐藏
bindsym $mod+minus move scratchpad
# 按$mod+= 再现窗口
bindsym $mod+plus scratchpad show
#---------------------------
bindsym $mod+Shift+a exec xfce4-appfinder # xfce程序启动器
# 将工作区移至下一个/上一个工作区并跟随
bindsym $mod+Ctrl+d workspace next
bindsym $mod+Ctrl+s workspace prev
# 关机 l锁屏 p关机 r重启 e退出i3
set $mode_system System (l) lock, (e) exit, (r) reboot, (o) shutdown
bindsym $mod+Shift+Ctrl+q mode "$mode_system"
mode "$mode_system" {
bindsym l exec --no-startup-id i3lock -c '#000000', mode "default"
bindsym e exec --no-startup-id i3-msg exit, mode "default"
bindsym r exec --no-startup-id systemctl reboot, mode "default"
bindsym o exec --no-startup-id systemctl poweroff, mode "default"
bindsym Escape mode "default"
}
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window's width.
# Pressing right will grow the window's width.
# Pressing up will shrink the window's height.
# Pressing down will grow the window's height.
bindsym h resize grow width 1 px or 1 ppt
bindsym l resize shrink width 1 px or 1 ppt
bindsym j resize grow height 1 px or 1 ppt
bindsym k resize shrink height 2 px or 1 rppt
#bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 5 px or 5 ppt
bindsym Down resize grow height 5 px or 5 ppt
bindsym Up resize shrink height 5 px or 5 ppt
bindsym Right resize grow width 5 px or 5 ppt
# back to normal: Enter or Escape or $mod+r
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "default"
}
# ======================================================================================================================================================
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
# A more modern dmenu replacement is rofi:
# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
#bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
# bar {
# status_command i3status
# }A.2 polybar 主配置（完整版）
.config/polybar/config（837 行）
ini
[colors]
; ;background = ${xrdb:color0:#222}
; background = #cc222222
; background-alt = #444
; ;foreground = ${xrdb:color7:#222}
; foreground = #b6a49b
; foreground-alt = #555
; primary = #ffb52a
; secondary = #e60053
; alert = #bd2c40
secondary = #e60053
nord7 = #8FBCBB
nord8 = #2bcec2
notice = #f1fa8c
;次配置颜色
success = #90EE90
;主配置颜色
warning = #EE6363
;#ff5555
background = #94222222
; 100 % 00
; 99 % 03
; 98 % 05
; 97 % 07
; 96 % 0A
; 95 % 0D
; 94 % 0F
; 93 % 12
; 92 % 14
; 91 % 17
; 90 % 1A
; 89 % 1C
; 88 % 1E
; 87 % 21
; 86 % 24
; 85 % 26
; 84 % 29
; 83 % 2B
; 82 % 2E
; 81 % 30
; 80 % 33
; 79 % 36
; 78 % 38
; 77 % 3B
; 76 % 3D
; 75 % 40
; 74 % 42
; 73 % 45
; 72 % 47
; 71 % 4A
; 70 % 4D
; 69 % 4F
; 68 % 52
; 67 % 54
; 66 % 57
; 65 % 59
; 64 % 5C
; 63 % 5E
; 62 % 61
; 61 % 63
; 60 % 66
; 59 % 69
; 58 % 6B
; 57 % 6E
; 56 % 70
; 55 % 73
; 54 % 75
; 53 % 78
; 52 % 7A
; 51 % 7D
; 50 % 80
; 49 % 82
; 48 % 85
; 47 % 87
; 46 % 8A
; 45 % 8C
; 44 % 8F
; 43 % 91
; 42 % 94
; 41 % 96
; 40 % 99
; 39 % 9C
; 38 % 9E
; 37 % A1
; 36 % A3
; 35 % A6
; 34 % A8
; 33 % AB
; 32 % AD
; 31 % B0
; 30 % B3
; 29 % B5
; 28 % B8
; 27 % BA
; 26 % BD
; 25 % BF
; 24 % C2
; 23 % C4
; 22 % C7
; 21 % C9
; 20 % CC
; 19 % CF
; 18 % D1
; 17 % D4
; 16 % D6
; 15 % D9
; 14 % DB
; 13 % DE
; 12 % E0
; 11 % E3
; 10 % E6
; 9 % E8
; 8 % EB
; 7 % ED
; 6 % F0
; 5 % F2
; 4 % F5
; 3 % F7
; 2 % FA
; 1 % FC
; 0 % FF
foreground = #ffffff
background-alt = #444
foreground-alt = #6272a4
[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
;pseudo-transparency = false
[global/wm]
margin-top = 1
margin-bottom = 3
[bar/mybar]
;monitor = ${env:MONITOR:HDMI-1}
;width = 100% ;显示栏的长度
height = 28 ;显示栏的宽度
;offset-x = 1%
;offset-y = 1%
radius = 12
fixed-center = true
background = ${colors.background}
foreground = ${colors.foreground}
line-size = 4
line-color = #f00
border-size = 0 ;顶部的距离
border-color = #00000000
padding-left = 2
padding-right = 2
module-margin-left = 1
module-margin-right = 2
;进程管理器的大小
tray-maxsize = 27
; https://github.com/ryanoasis/nerd-fonts
; https://www.nerdfonts.com/cheat-sheet
font-0 = fixed:pixelsize=13;1
font-1 = unifont:fontformat=truetype:size=13:antialias=false;0
font-2 = Noto Sans Symbols2:style=Regular:size=13
font-3 = Font Awesome 5 Free Solid:size=13 ; 注意族名必须带 Solid，fc-match 实测 'Font Awesome 5 Free' 匹配不上
font-4 = Font Awesome 7 Brands:style=Regular:size=12
font-5 = DejaVu Sans:style=Bold:size=12
font-6 = Symbola:size=11
font-7 = Noto Color Emoji:size=10
; 朗读古寺
enable-ipc = true
; 最左面显示
modules-left = powermenu date i3 title daily-poem
; title==显示窗口的名
; daily-poem==日常读诗
; powermenu==关机操作
; menu-apps== 菜单
; menu-apps==i3 工作区
;modules-center = mpd
;中间显示
modules-center =
;最右面显示
modules-right = cpu memory temperature wireless-network wired-network eth-upload eth-download wlan-upload wlan-download pulseaudio backlight battery system-usb-udev
;temperature==温度
;wireless-network=无线网络
;wired-network=有线网络
; eth-upload= eth网络的上传速、
; eth-download= eth网络的下载传速
; wlan-upload= wlan网络的上传速
; wlan-download = wlan网络的下载传速
;cpu=cpu
;memory=内存
;system-usb-udev==USB
;xkeyboard==键盘提示
;pulseaudio==音量
;backlight==屏幕亮度
;date==日期时间
;battery == 充电
# 托架
tray-position = right
tray-padding = 2
tray-background = ${colors.background}
transparent = true
cursor-click = pointer
cursor-scroll = ns-resize
;====================================
; ===菜单===
; https://github.com/polybar/polybar/wiki/Module:-menu
[module/menu-apps]
type = custom/menu
; 若为 true, <label-toggle> 将在左边,若为 false, 将在右边
expand-right = true
; menu-LEVEL-N 与 label-NAME 属性相同，并附加 exec 属性
; 命令将使用 /bin/sh -c $COMMAND
menu-0-0 = 浏览器
menu-0-0-exec = #menu-apps.open.1
menu-0-1 = 多媒体
menu-0-1-exec = #menu-apps.open.2
menu-1-0 = Firefox
menu-1-0-exec = firefox
menu-1-1 = Chromium
menu-1-1-exec = chromium
menu-2-0 = Gimp
menu-2-0-exec = gimp
menu-2-1 = Scrot
menu-2-1-exec = scrot
; <label-toggle> 可替换为 <label-(openclose)>
; 如果 expand-right 为 true ，则默认值为"<label-toggle><menu>"。注意，如果使用<label-toggle> 就必须定义 <label-open>
; format = <label-toggle> <menu>
label-open =
label-close =
; 分隔元件
label-separator =
; ===i3 工作区===
; https://github.com/polybar/polybar/wiki/Module:-i3
[module/i3]
type = internal/i3
format = <label-state> <label-mode>
;下面横杆
format-underline = #FFFFF0
index-sort = true
wrapping-scroll = false
label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.primary}
; 聚焦在显示器上的活动工作区
label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline= ${colors.primary}
label-focused-padding = 2
; 任何显示器上的非活动工作区
label-unfocused = %index%
label-unfocused-padding = 2
; 未聚焦在显示器生的活动工作区
label-visible = %index%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}
; 设置紧急提示的工作区
label-urgent = %index%
label-urgent-background = ${colors.alert}
label-urgent-padding = 2
; 工作区之间的分隔符
; label-separator =
; ===网络===
; https://github.com/polybar/polybar/wiki/Module:-network
; ===网络（自动检测有 IP 的网卡，支持双网卡切换）===
; https://github.com/polybar/polybar/wiki/Module:-script
[module/wired-network]
type = custom/script
exec = ~/.config/polybar/netinfo.sh ip
interval = 3.0
format-underline = #912CEE
label = %output%
label-foreground = ${colors.warning}
[module/wireless-network]
type = internal/network
interface = wlan0
interval = 3.0
; 间隔宽度
udspeed-minwidth = 3
; 所以端口累计
accumulate-stats = true
; 对未知状态的网络设备启用
unknown-as-up = true
format-connected = <label-connected>
# 填充
;format-connected-padding = 2
;下面横杆
format-connected-underline = #912CEE
format-disconnected = <label-disconnected>
label-connected = %essid%
label-connected-foreground = ${colors.warning}
;label-disconnected =
; label-disconnected =
; label-disconnected-foreground = #66ffffff
; ===eth0网速度===
; ===有线网速度（自动检测网卡）===
[module/eth-upload]
type = custom/script
exec = ~/.config/polybar/netinfo.sh up
interval = 3.0
format-underline = #FFE4E1
label = ↑ %output%
[module/eth-download]
type = custom/script
exec = ~/.config/polybar/netinfo.sh down
interval = 3.0
format-underline = #912CEE
label = ↓ %output%
; ===wlan网速度===
[module/wlan-upload]
type = internal/network
interface =wlan0
label-connected = %upspeed:7%
format-connected = <label-connected>
# 填充
;format-connected-padding = 2
;下面横杆
format-connected-underline = #FFE4E1
format-connected-prefix = "↑ "
format-connected-prefix-foreground = ${colors.warning}
[module/wlan-download]
type = internal/network
interface = wlan0
label-connected = %downspeed:7%
format-connected= <label-connected>
# 填充
;format-connected-padding = 2
;下面横杆
format-connected-underline = #912CEE
format-connected-prefix = "↓ "
format-connected-prefix-foreground = ${colors.warning}
; ===键盘提示===
; https://github.com/polybar/polybar/wiki/Module:-xkeyboard
[module/xkeyboard]
type = internal/xkeyboard
; 忽略列表
blacklist-0 = scroll lock
; <label-indicator>
format = <label-indicator>
format-spacing = 1
label-indicator-on-capslock =
label-indicator-off-capslock =
;label-indicator-on-numlock = 🅽
;label-indicator-off-numlock =
label-indicator-on-capslock-foreground = ${colors.warning}
; ===音量===
; https://github.com/polybar/polybar/wiki/Module:-pulseaudio
[module/pulseaudio]
type = internal/pulseaudio
format-volume = <ramp-volume> <label-volume>
# 填充
format-volume-padding = 2
;下面横杆
format-volume-underline = #CD2990
label-muted = 静音
label-muted-foreground = #666
ramp-volume-0 =
ramp-volume-0-foreground = ${colors.success}
ramp-volume-1 =
ramp-volume-1-foreground = ${colors.success}
ramp-volume-2 =
ramp-volume-2-foreground = ${colors.success}
ramp-volume-3 =
ramp-volume-3-foreground = ${colors.success}
ramp-volume-4 =
ramp-volume-4-foreground = ${colors.notice}
ramp-volume-5 =
ramp-volume-5-foreground = ${colors.warning}
ramp-volume-foreground = ${colors.nord7}
; ===CPU===
; https://github.com/polybar/polybar/wiki/Module:-cpu
[module/cpu]
type = internal/cpu
; 刷新间隔，默认: 1
interval = 0.5
format = <label>
;format = <label> <ramp-coreload>
# 填充
format-padding = 2
;下面横杆
format-underline = #CD1076
label = CPU%percentage%%
label-foreground = ${colors.warning}
;Spacing between individual per-core ramps
ramp-coreload-spacing = 1
ramp-coreload-0 = ▁
ramp-coreload-1 = ▂
ramp-coreload-2 = ▃
ramp-coreload-3 = ▄
ramp-coreload-4 = ▅
ramp-coreload-5 = ▆
ramp-coreload-6 = ▇
ramp-coreload-7 = █
ramp-coreload-0-foreground = #90EE90
ramp-coreload-1-foreground = #90EE90
ramp-coreload-2-foreground = #FF7F24
ramp-coreload-3-foreground = #fba922
ramp-coreload-4-foreground = #fba922
ramp-coreload-5-foreground = #fba922
ramp-coreload-6-foreground = ${colors.warning}
ramp-coreload-7-foreground = ${colors.warning}
; ===内存===
; https://github.com/polybar/polybar/wiki/Module:-memory
[module/memory]
type = internal/memory
interval = 1
format = <label>
# 填充
format-padding = 2
;下面横杆
format-underline = #FFA07A
label = Mem%percentage_used%%
;内存用量渐变色条（低→高：绿→黄→橙→红）
bar-used-width = 10
bar-used-foreground-0 = ${colors.success}
bar-used-foreground-1 = ${colors.notice}
bar-used-foreground-2 = #fba922
bar-used-foreground-3 = ${colors.warning}
bar-used-fill = █
bar-used-empty = ░
bar-used-empty-foreground = #555555
bar-used-indicator =
; ===屏幕亮度===
; https://github.com/polybar/polybar/wiki/Module:-xbacklight
[module/backlight]
type = internal/backlight
; 使用命令查询到设备文件:
; ls -1 /sys/class/backlight/
card = amdgpu_bl0
; 滚轮调节亮度
; sudo chown video /sys/class/backlight/intel_backlight/brightness
; sudo chmod g+w /sys/class/backlight/intel_backlight/brightness
; usermod -a -G video eonun
; Default: false
enable-scroll = true
format = <ramp> <label>
;下面横杆
format-underline = #8B2500
label = %percentage%%
; 用于 <ramp>
ramp-0 = 🌕
ramp-1 = 🌔
ramp-2 = 🌓
ramp-3 = 🌒
ramp-4 = 🌑
ramp-foreground=${colors.warning}
; 用于 <bar>
bar-width = 10
bar-indicator =
bar-fill = -
bar-empty = -
; ===日期时间===
; https://github.com/polybar/polybar/wiki/Module:-date
[module/date]
type = internal/date
; 更新间隔, 默认: 1.0
interval = 1.0
format = <label>
; 展开前
#date = %Y-%m-%d%
time = %H:%M:%S
;展开后
; 另一中格式
#date-alt = %Y-%m-%d-%H:%M:%S
time-alt = %Y年%m月%d日---时间:%H:%M:%S
#label = %date% %time%
label = %time%
label-foreground = ${colors.warning}
;显示一个
label-font = 1
; ===电源提示===
; https://github.com/polybar/polybar/wiki/Module:-battery
[module/battery]
type = internal/battery
; 电量大于 99% 显示充电完成
full-at = 99
; 使用以下命令列出电池和适配器:
; ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD
poll-interval = 3
; 时间过格式,默认: %H:%M:%S
#time-format = %M
; 充电
format-charging = <animation-charging> <label-charging>
;下面横杆
format-charging-underline = #00C5CD
format-charging-foreground = ${colors.success}
; 放电
format-discharging = <animation-discharging> <label-discharging>
;下面横杆
format-discharging-underline = #00C5CD
; 充电完成
;format-full = <ramp-capacity> <label-full>
;format-full-foreground = ${colors.warning}
; 充电状态
label-charging = %percentage%
;下面横杆
label-charging-underline = #00C5CD
;充电完成
label-full = %percentage%
;下面横杆
label-full-underline = #00C5CD
label-full-foreground = ${colors.warning}
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
bar-capacity-width = 10
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
; 动画帧率(毫秒)
animation-charging-framerate = 750
animation-discharging-0 =
animation-discharging-1 =
animation-discharging-2 =
animation-discharging-3 =
animation-discharging-4 =
; 动画帧率(毫秒)
animation-discharging-framerate = 500
; ===USB===
; https://github.com/polybar/polybar-scripts/tree/master/polybar-scripts/system-usb-udev
[module/system-usb-udev]
type = custom/script
exec = ~/.config/polybar/scripts/system-usb-udev.sh
tail = true
click-left = ~/.config/polybar/scripts/system-usb-udev.sh --mount &
click-right = ~/.config/polybar/scripts/system-usb-udev.sh --unmount &
; 温度
[module/temperature]
type = internal/temperature
thermal-zone = 0
;到60度就警报
warn-temperature = 60
;cpu温度
format = <ramp> <label>
# 补充
format-padding = 2
;下面横杆
format-underline = #696969
;颜色
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}
label = %temperature-c%
; cpu温度到60度执行
label-warn = %temperature-c%
; cpu温度到60执行颜色
label-warn-foreground = ${colors.secondary}
ramp-0 =
ramp-0-foreground = ${colors.success}
ramp-1 =
ramp-1-foreground = ${colors.success}
ramp-2 =
ramp-2-foreground = ${colors.success}
ramp-3 =
ramp-3-foreground = ${colors.success}
ramp-4 =
ramp-4-foreground = ${colors.success}
ramp-5 =
ramp-5-foreground = ${colors.success}
; 到老60度就会变成下面的颜色
ramp-6 =
ramp-6-foreground = ${colors.secondary}
;;关机操作
;[module/powermenu]
;type = custom/menu
;expand-right = true
;
;format-spacing = 1
;
;label-open = " "
;label-open-foreground = ${colors.secondary}
;label-close = " 取消"
;label-close-foreground = ${colors.secondary}
;label-separator = |
;label-separator-foreground = ${colors.foreground-alt}
;
;
;menu-0-0 = 关机
;menu-0-0-exec = poweroff
;menu-0-0-foreground=${colors.warning}
;menu-0-1 = 重启
;menu-0-1-exec = reboot
;menu-0-1-foreground=${colors.warning}
;menu-0-2 = 注销
;menu-0-2-exec = pkill -kill -u fe
;menu-0-2-foreground=${colors.warning}
; === 朗读诗句====
[module/daily-poem]
type = custom/ipc
;下面横杆
format-underline = #8B2500
# replace IDZJPFP9nkjOfsJ5KJO98E4Tgu3DbFHh with your token from https://v2.jinrishici.com/token.
hook-0 = LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem require vU1whWzAS7pqAHRkvTD9KxF757ZXcfwS ~/.config/polybar/scripts/poem.txt
hook-1 = LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem get ~/.config/polybar/scripts/poem.txt content
hook-2 = LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem get ~/.config/polybar/scripts/poem.txt origin
hook-3 = LD_LIBRARY_PATH=$HOME/.config/polybar/scripts/libssl11/usr/lib/x86_64-linux-gnu ~/.config/polybar/scripts/daily-poem get ~/.config/polybar/scripts/poem.txt match
initial = 1
click-left = polybar-msg -p %pid% hook daily-poem 2
scroll-up = polybar-msg -p %pid% hook daily-poem 3
scroll-down = polybar-msg -p %pid% hook daily-poem 4
click-right = polybar-msg -p %pid% hook daily-poem 1
;显示窗口的名
[module/title]
type = internal/xwindow
; Available tags:
; <label> (default)
format = <label>
# 填充
;下面横杆
format-underline = #8B7765
format-background = ${colors.warning}
format-foreground =
format-padding = 4
; Available tokens:
; %title%
; Default: %title%
label = %title%
; 标签名最大显示多少字
label-maxlen = 15
; Used instead of label when there is no window title
; Available tokens:
; None
label-empty = Empty
label-empty-foreground = ${colors.warning}A.3 polybar 启动脚本
.config/polybar/launch.sh（12 行），记得 chmod +x
bash
#!/usr/bin/env bash
# Terminate already running bar instances
killall -q polybar
# If all your bars have ipc enabled, you can also use
# polybar-msg cmd quit
# Launch bar1 and bar2
echo "---" | tee -a /tmp/polybar1.log /tmp/polybar2.log
polybar mybar 2>&1 | tee -a /tmp/polybar1.log & disown
echo "Bars launched..."A.4 polybar 附加脚本
.config/polybar/scripts/info-hackspeed.sh（63 行）
bash
#!/bin/sh
# shellcheck disable=SC2016,SC2059
KEYBOARD_ID="AT Translated Set 2 keyboard"
# cpm: characters per minute
# wpm: words per minute (1 word = 5 characters)
METRIC=cpm
FORMAT=" %d $METRIC"
INTERVAL=20
# If you have a keyboard layout that is not listed here yet, create a condition
# yourself. $3 is the key index. Use `xinput test "AT Translated Set 2 keyboard"`
# to see key codes in real time. Be sure to open a pull request for your
# layout's condition!
LAYOUT=qwerty
case "$LAYOUT" in
qwerty) CONDITION='($3 >= 10 && $3 <= 19) || ($3 >= 24 && $3 <= 33) || ($3 >= 37 && $3 <= 53) || ($3 >= 52 && $3 <= 58)'; ;;
azerty) CONDITION='($3 >= 10 && $3 <= 19) || ($3 >= 24 && $3 <= 33) || ($3 >= 37 && $3 <= 54) || ($3 >= 52 && $3 <= 57)'; ;;
qwertz) CONDITION='($3 >= 10 && $3 <= 20) || ($3 >= 24 && $3 <= 34) || ($3 == 36) || ($3 >= 38 && $3 <= 48) || ($3 >= 52 && $3 <= 58)'; ;;
dontcare) CONDITION='1'; ;; # Just register all key presses, not only letters and numbers
*) echo "Unsupported layout \"$LAYOUT\""; exit 1; ;;
esac
# We have to account for the fact we're not listening a whole minute
multiply_by=60
divide_by=$INTERVAL
case "$METRIC" in
wpm) divide_by=$((divide_by * 5)); ;;
cpm) ;;
*) echo "Unsupported metric \"$METRIC\""; exit 1; ;;
esac
hackspeed_cache="$(mktemp -p '' hackspeed_cache.XXXXX)"
trap 'rm "$hackspeed_cache"' EXIT
# Write a dot to our cache for each key press
printf '' > "$hackspeed_cache"
xinput test "$KEYBOARD_ID" | \
stdbuf -o0 awk '$1 == "key" && $2 == "press" && ('"$CONDITION"') {printf "."}' >> "$hackspeed_cache" &
while true; do
# Ask the kernel how big the file is with the command `stat`. The number we
# get is the file size in bytes, which equals the amount of dots the file
# contains, and hence how much keys were pressed since the file was last
# cleared.
lines=$(stat --format %s "$hackspeed_cache")
# Truncate the cache file so that in the next iteration, we count only new
# keypresses
printf '' > "$hackspeed_cache"
# The shell only does integer operations, so make sure to first multiply and
# then divide
value=$((lines * multiply_by / divide_by))
printf "$FORMAT\\n" "$value"
sleep $INTERVAL
doneA.4b
.config/polybar/scripts/openweathermap-fullfeatured.sh（96 行）（天气脚本，使用前到脚本头部填自己的 openweathermap API key）
bash
#!/bin/sh
get_icon() {
case $1 in
01d) icon="";;
01n) icon="";;
02d) icon="";;
02n) icon="";;
03*) icon="";;
04*) icon="";;
09d) icon="";;
09n) icon="";;
10d) icon="";;
10n) icon="";;
11d) icon="";;
11n) icon="";;
13d) icon="";;
13n) icon="";;
50d) icon="";;
50n) icon="";;
*) icon="";
esac
echo $icon
}
get_duration() {
osname=$(uname -s)
case $osname in
*BSD) date -r "$1" -u +%H:%M;;
*) date --date="@$1" -u +%H:%M;;
esac
}
KEY="62628c16e6247d2c1caf0cb398a3dffa"
CITY="Ningbo"
UNITS="metric"
SYMBOL="°C"
API="https://api.openweathermap.org/data/2.5"
if [ -n "$CITY" ]; then
if [ "$CITY" -eq "$CITY" ] 2>/dev/null; then
CITY_PARAM="id=$CITY"
else
CITY_PARAM="q=$CITY"
fi
current=$(curl -sf "$API/weather?appid=$KEY&$CITY_PARAM&units=$UNITS")
forecast=$(curl -sf "$API/forecast?appid=$KEY&$CITY_PARAM&units=$UNITS&cnt=1")
else
location=$(curl -sf https://location.services.mozilla.com/v1/geolocate?key=geoclue)
if [ -n "$location" ]; then
location_lat="$(echo "$location" | jq '.location.lat')"
location_lon="$(echo "$location" | jq '.location.lng')"
current=$(curl -sf "$API/weather?appid=$KEY&lat=$location_lat&lon=$location_lon&units=$UNITS")
forecast=$(curl -sf "$API/forecast?appid=$KEY&lat=$location_lat&lon=$location_lon&units=$UNITS&cnt=1")
fi
fi
if [ -n "$current" ] && [ -n "$forecast" ]; then
current_temp=$(echo "$current" | jq ".main.temp" | cut -d "." -f 1)
current_icon=$(echo "$current" | jq -r ".weather[0].icon")
forecast_temp=$(echo "$forecast" | jq ".list[].main.temp" | cut -d "." -f 1)
forecast_icon=$(echo "$forecast" | jq -r ".list[].weather[0].icon")
fi
if [ "$current_temp" -gt "$forecast_temp" ]; then
trend=""
elif [ "$forecast_temp" -gt "$current_temp" ]; then
trend=""
else
trend=""
fi
sun_rise=$(echo "$current" | jq ".sys.sunrise")
sun_set=$(echo "$current" | jq ".sys.sunset")
now=$(date +%s)
if [ "$sun_rise" -gt "$now" ]; then
daytime=" $(get_duration "$((sun_rise-now))")"
elif [ "$sun_set" -gt "$now" ]; then
daytime=" $(get_duration "$((sun_set-now))")"
else
daytime=" $(get_duration "$((sun_rise-now))")"
fi
echo "$(get_icon "$current_icon") $current_temp$SYMBOL $trend $(get_icon "$forecast_icon") $forecast_temp$SYMBOL $daytime"
fiA.4c
.config/polybar/scripts/system-usb-udev.sh（87 行）
bash
#!/bin/sh
usb_print() {
devices=$(lsblk -Jplno NAME,TYPE,RM,SIZE,MOUNTPOINT,VENDOR)
output=""
counter=0
for unmounted in $(echo "$devices" | jq -r '.blockdevices[] | select(.type == "part") | select(.rm == true) | select(.mountpoint == null) | .name'); do
unmounted=$(echo "$unmounted" | tr -d "[:digit:]")
unmounted=$(echo "$devices" | jq -r '.blockdevices[] | select(.name == "'"$unmounted"'") | .vendor')
unmounted=$(echo "$unmounted" | tr -d ' ')
if [ $counter -eq 0 ]; then
space=""
else
space=" "
fi
counter=$((counter + 1))
output="$output$space#1 $unmounted"
done
for mounted in $(echo "$devices" | jq -r '.blockdevices[] | select(.type == "part") | select(.rm == true) | select(.mountpoint != null) | .size'); do
if [ $counter -eq 0 ]; then
space=""
else
space=" "
fi
counter=$((counter + 1))
output="$output$space#2 $mounted"
done
echo "$output"
}
usb_update() {
pid=$(cat "$path_pid")
if [ "$pid" != "" ]; then
kill -10 "$pid"
fi
}
path_pid="/tmp/polybar-system-usb-udev.pid"
case "$1" in
--update)
usb_update
;;
--mount)
devices=$(lsblk -Jplno NAME,TYPE,RM,MOUNTPOINT)
for mount in $(echo "$devices" | jq -r '.blockdevices[] | select(.type == "part") | select(.rm == true) | select(.mountpoint == null) | .name'); do
udisksctl mount --no-user-interaction -b "$mount"
# mountpoint=$(udisksctl mount --no-user-interaction -b $mount)
# mountpoint=$(echo $mountpoint | cut -d " " -f 4- | tr -d ".")
# terminal -e "bash -lc 'filemanager $mountpoint'"
done
usb_update
;;
--unmount)
devices=$(lsblk -Jplno NAME,TYPE,RM,MOUNTPOINT)
for unmount in $(echo "$devices" | jq -r '.blockdevices[] | select(.type == "part") | select(.rm == true) | select(.mountpoint != null) | .name'); do
udisksctl unmount --no-user-interaction -b "$unmount"
udisksctl power-off --no-user-interaction -b "$unmount"
done
usb_update
;;
*)
echo $$ > $path_pid
trap exit INT
trap "echo" USR1
while true; do
usb_print
sleep 60 &
wait
done
;;
esacA.4d
.config/polybar/scripts/poem.txt（3 行）（诗词模块的备用语料）
text
沉恨细思，不如桃杏，犹解嫁东风。
宋代-张先 一丛花令·伤高怀远几时穷
风A.5 rofi Nord 主题（完整版）
.config/rofi/config.rasi（147 行）
rasi
/*
* ROFI 主题 ------ Nord 柔和夜蓝版
* 与夜景灯笼壁纸、Kali Dark 桌面风格统一
*/
* {
nord0: #2E3440;
nord1: #3B4252;
nord2: #434C5E;
nord3: #4C566A;
nord4: #D8DEE9;
nord5: #E5E9F0;
nord6: #ECEFF4;
nord7: #8FBCBB;
nord8: #88C0D0;
nord9: #81A1C1;
nord10: #5E81AC;
nord11: #BF616A;
nord13: #EBCB8B;
nord14: #A3BE8C;
accent: #88C0D0;
bg: #2E3440;
bg-alt: #3B4252;
fg: #ECEFF4;
fg-dim: #D8DEE9;
sel-text: #2E3440;
spacing: 0;
background-color: transparent;
font: "Fira Code 14";
}
window {
transparency: "real";
location: center;
width: 760px;
background-color: @bg;
border: 2px;
border-color: @nord10;
border-radius: 10px;
}
mainbox {
children: [inputbar, mode-switcher, listview];
spacing: 14px;
padding: 18px 18px 14px 18px;
}
/* ── 搜索栏 ── */
inputbar {
padding: 12px 18px;
spacing: 10px;
background-color: @bg-alt;
border-radius: 8px;
children: [prompt, textbox-prompt-colon, entry, case-indicator];
}
prompt {
text-color: @accent;
}
textbox-prompt-colon {
expand: false;
str: ":";
text-color: @accent;
}
entry {
text-color: @fg;
placeholder: "输入以搜索应用...";
placeholder-color: @nord4;
}
case-indicator {
text-color: @nord11;
}
/* ── 模式切换标签 ── */
mode-switcher {
spacing: 6px;
}
button {
background-color: transparent;
text-color: @fg-dim;
padding: 8px 24px;
border-radius: 8px;
}
button selected {
background-color: @nord10;
text-color: @nord6;
}
/* ── 应用列表 ── */
listview {
scrollbar: true;
spacing: 3px;
margin: 0 2px 0 0;
fixed-height: false;
lines: 10;
}
scrollbar {
background-color: transparent;
handle-color: @nord10;
handle-width: 6px;
border: 0;
margin: 0;
}
element {
padding: 9px 14px;
spacing: 12px;
border-radius: 8px;
}
element-icon {
size: 24px;
}
element normal {
background-color: transparent;
}
element selected {
background-color: @nord1;
text-color: @accent;
}
element normal normal, element selected normal, element alternate normal {
text-color: @fg;
}
element normal urgent, element selected urgent, element alternate urgent {
text-color: @nord11;
}
element normal active, element selected active, element alternate active {
text-color: @nord14;
}
element selected normal {
text-color: @nord8;
}A.6 konsolerc（完整版）
.config/konsolerc（93 行）
ini
MenuBar=Disabled
State=AAAA/wAAAAD9AAAAAQAAAAAAAAAAAAAAAPwCAAAAAvsAAAAcAFMAUwBIAE0AYQBuAGEAZwBlAHIARABvAGMAawAAAAAA/////wAAAN0BAAAD+wAAACIAUQB1AGkAYwBrAEMAbwBtAG0AYQBuAGQAcwBEAG8AYwBrAAAAAAD/////AAAAsgEAAAMAAAUAAAACagAAAAQAAAAEAAAACAAAAAj8AAAAAQAAAAIAAAACAAAAFgBtAGEAaQBuAFQAbwBvAGwAQgBhAHIBAAAAAP////8AAAAAAAAAAAAAABwAcwBlAHMAcwBpAG8AbgBUAG8AbwBsAGIAYQByAQAAAVsAAAHvAAAAAAAAAAA=
eDP Height 1920x1080=665
eDP Width 1920x1080=1280
eDP XPosition 1920x1080=320
eDP YPosition 1920x1080=240
[Desktop Entry]
DefaultProfile=Profile 2.profile
[General]
ConfigVersion=1
[KFileDialog Settings]
Recent Files[$e]=lmxlr2.jpg,file:$HOME/桌面/2023-06-04_18-40.png,file:$HOME/图片/壁纸/浏览器/lmxlr2.jpg
Recent URLs[$e]=file:$HOME/图片/壁纸/浏览器/,file:$HOME/桌面/
detailViewIconSize=16
[MainWindow]
1601x917 screen: Height=869
1601x917 screen: Width=1577
1601x917 screen: XPosition=12
1601x917 screen: YPosition=36
1718x918 screen: Height=870
1718x918 screen: Width=841
1718x918 screen: XPosition=865
1718x918 screen: YPosition=36
1918x966 screen: Height=918
1918x966 screen: Width=621
1918x966 screen: XPosition=12
1918x966 screen: YPosition=36
1920x1080 screen: Height=1032
1920x1080 screen: Width=622
1920x1080 screen: XPosition=1286
1920x1080 screen: YPosition=36
2 screens: Height=758
2 screens: Width=1396
2 screens: XPosition=2093
2 screens: YPosition=284
961x569 screen: Height=521
961x569 screen: Width=937
HDMI-A-0=HDMI-A-0
HDMI-A-0 Height 1920x1080=1008
HDMI-A-0 Height 1920x1080 HDMI-A-0=1021
HDMI-A-0 Width 1920x1080=1920
HDMI-A-0 Width 1920x1080 HDMI-A-0=1920
HDMI-A-0 eDP=HDMI-A-0
HDMI-A-0 eDP Height 1080x1920=658
HDMI-A-0 eDP Height 1920x1080=845
HDMI-A-0 eDP Height 1920x1080 HDMI-A-0=671
HDMI-A-0 eDP Height 1920x1080 eDP=686
HDMI-A-0 eDP Width 1080x1920=1080
HDMI-A-0 eDP Width 1920x1080=1738
HDMI-A-0 eDP Width 1920x1080 HDMI-A-0=1295
HDMI-A-0 eDP Width 1920x1080 eDP=1296
HDMI-A-0 eDP Window-Maximized 1080x1920 HDMI-A-0=true
HDMI-A-0 eDP Window-Maximized 1920x1080 eDP=true
HDMI-A-0 eDP XPosition 1920x1080=2074
HDMI-A-0 eDP XPosition 1920x1080 HDMI-A-0=2030
HDMI-A-0 eDP XPosition 1920x1080 eDP=591
HDMI-A-0 eDP YPosition 1920x1080=72
HDMI-A-0 eDP YPosition 1920x1080 HDMI-A-0=180
HDMI-A-0 eDP YPosition 1920x1080 eDP=313
MenuBar=Disabled
Virtual1=Virtual1
eDP=eDP
eDP HDMI-A-0=eDP
eDP HDMI-A-0 Height 1280x800 HDMI-A-0=562
eDP HDMI-A-0 Height 1920x1080 HDMI-A-0=592
eDP HDMI-A-0 Height 1920x1080 eDP=1021
eDP HDMI-A-0 Width 1280x800 HDMI-A-0=1133
eDP HDMI-A-0 Width 1920x1080 HDMI-A-0=1390
eDP HDMI-A-0 Width 1920x1080 eDP=1920
eDP HDMI-A-0 XPosition 1280x800 HDMI-A-0=2196
eDP HDMI-A-0 XPosition 1920x1080 HDMI-A-0=412
eDP HDMI-A-0 XPosition 1920x1080 eDP=653
eDP HDMI-A-0 YPosition 1280x800 HDMI-A-0=145
eDP HDMI-A-0 YPosition 1920x1080 HDMI-A-0=178
eDP HDMI-A-0 YPosition 1920x1080 eDP=548
eDP Height 1920x1080=665
eDP Height 1920x1080 eDP=1021
eDP Width 1920x1080=1280
eDP Width 1920x1080 eDP=1920
eDP XPosition 1920x1080=460
eDP XPosition 1920x1080 eDP=0
eDP YPosition 1920x1080=122
eDP YPosition 1920x1080 eDP=59
[Notification Messages]
CloseAllTabs=true
[UiSettings]
ColorScheme=A.6b kdeglobals------konsole 工具栏（"标题栏"）字体
konsole 窗口顶部"新建标签页 / 拆分视图 / 复制 / 粘贴"工具栏的文字大小
由 ~/.config/kdeglobals 控制（不跟 Profile 字体走）。缩小它的写法：
ini
[General]
toolBarFont=Noto Sans,9,-1,5,50,0,0,0,0,0改完重启 konsole 生效。想更小把 9 改 8；kdeglobals.bak-tb 为改动前备份。
A.7 konsole Profile 与配色方案
.local/share/konsole/Kali Dark.profile（6 行）
ini
[Appearance]
ColorScheme=Kali-Dark
[General]
Name=Kali Dark
Parent=FALLBACK/A.7b
.local/share/konsole/Profile 1.profile（6 行）
ini
[Appearance]
ColorScheme=Kali-Dark
[General]
Name=Profile 1
Parent=FALLBACK/A.7c
.local/share/konsole/Profile 2.profile（12 行）
ini
[Appearance]
ColorScheme=Kali-Dark
Font=Fira Code Retina,12,-1,5,53,0,0,0,0,0,Regular
[General]
Name=Profile 2
Parent=FALLBACK/
StartInCurrentSessionDir=true
[Scrolling]
HistoryMode=2
ScrollBarPosition=2A.7d
.local/share/konsole/Profile 3.profile（6 行）
ini
[General]
Name=Profile 3
Parent=/home/sirius/.local/share/konsole/Profile 2.profile
[Interaction Options]
TrimLeadingSpacesInSelectedText=falseA.7e
.local/share/konsole/Kali-Dark.colorscheme（100 行）（配色方案，konsole 自带同名主题可跳过）
ini
[Background]
Color=43,45,56
[BackgroundFaint]
Color=35,37,46
[BackgroundIntense]
Color=35,37,46
[Color0]
Color=31,34,41
[Color0Faint]
Color=31,34,41
[Color0Intense]
Color=23,123,126
[Color1]
Color=212,25,25
[Color1Faint]
Color=212,25,25
[Color1Intense]
Color=236,1,1
[Color2]
Color=90,180,160
[Color2Faint]
Color=79,159,142
[Color2Intense]
Color=71,212,185
[Color3]
Color=254,164,76
[Color3Faint]
Color=254,164,76
[Color3Intense]
Color=255,138,24
[Color4]
Color=0,180,180
[Color4Faint]
Color=125,156,240
[Color4Intense]
Color=46,238,255
[Color5]
Color=151,85,179
[Color5Faint]
Color=151,85,179
[Color5Intense]
Color=150,42,195
[Color6]
Color=73,174,230
[Color6Faint]
Color=73,174,230
[Color6Intense]
Color=80,161,247
[Color7]
Color=153,153,153
[Color7Faint]
Color=230,230,230
[Color7Intense]
Color=255,255,255
[Foreground]
Color=0,209,209
[ForegroundFaint]
Color=255,255,255
[ForegroundIntense]
Color=255,255,255
[General]
Anchor=0.5,0.5
Blur=true
ColorRandomization=false
Description=Kali Dark
FillStyle=Tile
Opacity=0.83
Wallpaper=
WallpaperFlipType=NoFlip
WallpaperOpacity=1A.8 zshrc（完整版）
.zshrc（292 行），注意把 /home/sirius 替换成你的用户名
bash
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
# Start configuration added by Zim install {{{
#
# User configuration sourced by interactive shells
#
# -----------------
# Zsh configuration
# -----------------
#
# History
#
# Remove older command from the history if a duplicate is to be added.
setopt HIST_IGNORE_ALL_DUPS
#
# Input/output
#
# Set editor default keymap to emacs (`-e`) or vi (`-v`)
bindkey -e
# Prompt for spelling correction of commands.
#setopt CORRECT
# Customize spelling correction prompt.
#SPROMPT='zsh: correct %F{red}%R%f to %F{green}%r%f [nyae]? '
# Remove path separator from WORDCHARS.
WORDCHARS=${WORDCHARS//[\/]}
# -----------------
# Zim configuration
# -----------------
# Use degit instead of git as the default tool to install and update modules.
#zstyle ':zim:zmodule' use 'degit'
# --------------------
# Module configuration
# --------------------
#
# git
#
# Set a custom prefix for the generated aliases. The default prefix is 'G'.
#zstyle ':zim:git' aliases-prefix 'g'
#
# input
#
# Append `../` to your input for each `.` you type after an initial `..`
#zstyle ':zim:input' double-dot-expand yes
#
# termtitle
#
# Set a custom terminal title format using prompt expansion escape sequences.
# See http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
# If none is provided, the default '%n@%m: %~' is used.
#zstyle ':zim:termtitle' format '%1~'
#
# zsh-autosuggestions
#
# Disable automatic widget re-binding on each precmd. This can be set when
# zsh-users/zsh-autosuggestions is the last module in your ~/.zimrc.
ZSH_AUTOSUGGEST_MANUAL_REBIND=1
# Customize the style that the suggestions are shown with.
# See https://github.com/zsh-users/zsh-autosuggestions/blob/master/README.md#suggestion-highlight-style
#ZSH_AUTOSUGGEST_HIGHLIGHT_STYLE='fg=242'
#
# zsh-syntax-highlighting
#
# Set what highlighters will be used.
# See https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets)
# Customize the main highlighter styles.
# See https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters/main.md#how-to-tweak-it
#typeset -A ZSH_HIGHLIGHT_STYLES
#ZSH_HIGHLIGHT_STYLES[comment]='fg=242'
# ------------------
# Initialize modules
# ------------------
ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
# Download zimfw plugin manager if missing.
if [[ ! -e ${ZIM_HOME}/zimfw.zsh ]]; then
if (( ${+commands[curl]} )); then
curl -fsSL --create-dirs -o ${ZIM_HOME}/zimfw.zsh \
https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
else
mkdir -p ${ZIM_HOME} && wget -nv -O ${ZIM_HOME}/zimfw.zsh \
https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
fi
fi
# Install missing modules, and update ${ZIM_HOME}/init.zsh if missing or outdated.
if [[ ! ${ZIM_HOME}/init.zsh -nt ${ZDOTDIR:-${HOME}}/.zimrc ]]; then
source ${ZIM_HOME}/zimfw.zsh init -q
fi
# Initialize modules.
source ${ZIM_HOME}/init.zsh
# ------------------------------
# Post-init module configuration
# ------------------------------
#
# zsh-history-substring-search
#
zmodload -F zsh/terminfo +p:terminfo
# Bind ^[[A/^[[B manually so up/down works both before and after zle-line-init
for key ('^[[A' '^P' ${terminfo[kcuu1]}) bindkey ${key} history-substring-search-up
for key ('^[[B' '^N' ${terminfo[kcud1]}) bindkey ${key} history-substring-search-down
for key ('k') bindkey -M vicmd ${key} history-substring-search-up
for key ('j') bindkey -M vicmd ${key} history-substring-search-down
unset key
# }}} End configuration added by Zim install
# 自己配置
# 命令
# alias ne 已改为 fastfetch（见下方 fastfetch alias）
alias l="lolcat"
alias 代理="proxychains4"
alias 搜索="find ./ -name"
alias 查询="grep"
alias 删除夹="rm -r"
alias 创建夹="mkdir"
alias 程序搜索="whereis"
alias 权限="chown"
alias 更新时间=" /etc/init.d/ntp start"
alias 结束="kill -9"
alias 关机="shutdown now"
alias 重启="reboot"
alias 注销="logout"
alias 解压rar="unrar x "
alias 解压bz2="bunzip2"
alias 解压gz="gunzip "
alias 安装="sudo apt-get install "
alias 卸载="sudo apt-get purge"
alias 更新="sudo apt-get dist-upgrade"
alias 系统="uname -a"
alias h="htop"
alias 下载="wget"
alias tcp="netstat -ntlp"
alias udp="netstat -nulp"
alias r="ranger"
alias t="tree"
# ========================fzf配置================================
# 要调用的配置文件
source ~/.fzf/shell/key-bindings.zsh
source ~/.fzf/shell/completion.zsh
# 在终端输入
export FZF_DEFAULT_COMMAND='find .'
# 输入\触发
export FZF_COMPLETION_TRIGGER='\'
export FZF_TMUX=1
# 大小
export FZF_TMUX_HEIGHT='90%'
#export FZF_DEFAULT_OPTS='--height 90% --layout=reverse --border --preview "echo {} | ~/.oh-my-zsh/file_preview.py" --preview-window=down'
# 下面是显示效果
export FZF_DEFAULT_OPTS=' --preview "[[ $(file --mime {}) =~ binary ]] && echo {} | ~/.oh-my-zsh/file_preview.py || (ccat --color=always {} || highlight -O ansi -l {} || cat {}) 2> /dev/null | head -500 " '
export FZF_PREVIEW_COMMAND='[[ $(file --mime {}) =~ binary ]] && echo {} is a binary file || (ccat --color=always {} || highlight -O ansi -l {} || cat {}) 2> /dev/null | head -500'
# fzf颜色
export FZF_DEFAULT_OPTS=$FZF_DEFAULT_OPTS'
--color=dark
--color=fg:-1,bg:-1,hl:#5fff87,fg+:-1,bg+:-1,hl+:#ffaf5f
--color=info:#af87ff,prompt:#5fff87,pointer:#ff87d7,marker:#ff87d7,spinner:#ff87d7
'
# 输入vim调用这会执行{}里面的内容，-type f 只搜索文件
_fzf_compgen_path() {
find * -type f
}
# 输入vim调用这会执行{}里面的内容，-type d 只搜索文件夹
_fzf_compgen_dir() {
find * -type d
}
plugins=(
git
zsh-autosuggestions
zsh-syntax-highlighting
fzf-zsh-plugin
#fzf-tab #自动补全
)
# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH
# Path to your oh-my-zsh installation.
export ZSH="/home/sirius/.oh-my-zsh"
# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
#ZSH_THEME="jonathan"
#ZSH_THEME="funky"
#ZSH_THEME="agnoster"
#ZSH_THEME="ys"
# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"
# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"
# Uncomment the following line to disable bi-weekly auto-update checks.
DISABLE_AUTO_UPDATE="true"
# Uncomment the following line to automatically update without prompting.
# DISABLE_UPDATE_PROMPT="true"
# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_ZSH_DAYS=13
# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"
# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"
# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"
# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"
# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"
# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"
# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"
# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder
# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
source $ZSH/oh-my-zsh.sh
# User configuration
# export MANPATH="/usr/local/man:$MANPATH"
# You may need to manually set your language environment
# export LANG=en_US.UTF-8
# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
# export EDITOR='vim'
# else
# export EDITOR='mvim'
# fi
# Compilation flags
# export ARCHFLAGS="-arch x86_64"
# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
#source ~/.oh-my-zsh/plugins/incr/incr*.zsh
# -- START ACTIVESTATE INSTALLATION
#export PATH="/home/sirius/.local/ActiveState/StateTool/release/bin:$PATH"
# -- STOP ACTIVESTATE INSTALLATION
# -- START ACTIVESTATE DEFAULT RUNTIME ENVIRONMENT
#export PATH="/home/sirius/.cache/activestate/bin:$PATH"
# -- STOP ACTIVESTATE DEFAULT RUNTIME ENVIRONMENT
# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
(( ! ${+functions[p10k]} )) || p10k finalize
alias ne="fastfetch | lolcat"A.8b zimrc（完整版）
.zimrc（170 行）
zsh
# 自己添加的
zmodule romkatv/powerlevel10k
# Start configuration added by Zim install {{{
#
# This is not sourced during shell startup, and it's only used to configure the
# zimfw plugin manager.
#
#
# Modules
#
# Sets sane Zsh built-in environment options.
zmodule environment
# Provides handy git aliases and functions.
zmodule git
# Applies correct bindkeys for input events.
zmodule input
# Sets a custom terminal title.
zmodule termtitle
# Utility aliases and functions. Adds colour to ls, grep and less.
zmodule utility
#
# Prompt
#
# Exposes to prompts how long the last command took to execute, used by asciiship.
zmodule duration-info
# Exposes git repository status information to prompts, used by asciiship.
zmodule git-info
# A heavily reduced, ASCII-only version of the Spaceship and Starship prompts.
zmodule asciiship
#
# Completion
#
# Additional completion definitions for Zsh.
zmodule zsh-users/zsh-completions --fpath src
# Enables and configures smart and extensive tab completion.
# completion must be sourced after all modules that add completion definitions.
zmodule completion
#
# Modules that must be initialized last
#
# Fish-like syntax highlighting for Zsh.
# zsh-users/zsh-syntax-highlighting must be sourced after completion
zmodule zsh-users/zsh-syntax-highlighting
# Fish-like history search (up arrow) for Zsh.
# zsh-users/zsh-history-substring-search must be sourced after zsh-users/zsh-syntax-highlighting
zmodule zsh-users/zsh-history-substring-search
# Fish-like autosuggestions for Zsh.
zmodule zsh-users/zsh-autosuggestions
# }}} End configuration added by Zim install
# Start configuration added by Zim install {{{
#
# This is not sourced during shell startup, and it's only used to configure the
# zimfw plugin manager.
#
#
# Modules
#
# Sets sane Zsh built-in environment options.
zmodule environment
# Provides handy git aliases and functions.
zmodule git
# Applies correct bindkeys for input events.
zmodule input
# Sets a custom terminal title.
zmodule termtitle
# Utility aliases and functions. Adds colour to ls, grep and less.
zmodule utility
#
# Prompt
#
# Exposes to prompts how long the last command took to execute, used by asciiship.
zmodule duration-info
# Exposes git repository status information to prompts, used by asciiship.
zmodule git-info
# A heavily reduced, ASCII-only version of the Spaceship and Starship prompts.
zmodule asciiship
#
# Completion
#
# Additional completion definitions for Zsh.
zmodule zsh-users/zsh-completions --fpath src
# Enables and configures smart and extensive tab completion.
# completion must be sourced after all modules that add completion definitions.
zmodule completion
#
# Modules that must be initialized last
#
# Fish-like syntax highlighting for Zsh.
# zsh-users/zsh-syntax-highlighting must be sourced after completion
zmodule zsh-users/zsh-syntax-highlighting
# Fish-like history search (up arrow) for Zsh.
# zsh-users/zsh-history-substring-search must be sourced after zsh-users/zsh-syntax-highlighting
zmodule zsh-users/zsh-history-substring-search
# Fish-like autosuggestions for Zsh.
zmodule zsh-users/zsh-autosuggestions
# }}} End configuration added by Zim install
# Start configuration added by Zim install {{{
#
# This is not sourced during shell startup, and it's only used to configure the
# zimfw plugin manager.
#
#
# Modules
#
# Sets sane Zsh built-in environment options.
zmodule environment
# Provides handy git aliases and functions.
zmodule git
# Applies correct bindkeys for input events.
zmodule input
# Sets a custom terminal title.
zmodule termtitle
# Utility aliases and functions. Adds colour to ls, grep and less.
zmodule utility
#
# Prompt
#
# Exposes to prompts how long the last command took to execute, used by asciiship.
zmodule duration-info
# Exposes git repository status information to prompts, used by asciiship.
zmodule git-info
# A heavily reduced, ASCII-only version of the Spaceship and Starship prompts.
zmodule asciiship
#
# Completion
#
# Additional completion definitions for Zsh.
zmodule zsh-users/zsh-completions --fpath src
# Enables and configures smart and extensive tab completion.
# completion must be sourced after all modules that add completion definitions.
zmodule completion
#
# Modules that must be initialized last
#
# Fish-like syntax highlighting for Zsh.
# zsh-users/zsh-syntax-highlighting must be sourced after completion
zmodule zsh-users/zsh-syntax-highlighting
# Fish-like history search (up arrow) for Zsh.
# zsh-users/zsh-history-substring-search must be sourced after zsh-users/zsh-syntax-highlighting
zmodule zsh-users/zsh-history-substring-search
# Fish-like autosuggestions for Zsh.
zmodule zsh-users/zsh-autosuggestions
# }}} End configuration added by Zim installA.8c p10k 提示符配置（完整版）
.p10k.zsh（1826 行）
zsh
# Generated by Powerlevel10k configuration wizard on 2023-09-13 at 00:52 CST.
# Based on romkatv/powerlevel10k/config/p10k-rainbow.zsh, checksum 47269.
# Wizard options: nerdfont-complete + powerline, small icons, rainbow, unicode,
# angled separators, sharp heads, flat tails, 1 line, sparse, many icons, concise,
# instant_prompt=verbose.
# Type `p10k configure` to generate another config.
#
# Config for Powerlevel10k with powerline prompt style with colorful background.
# Type `p10k configure` to generate your own config based on it.
#
# Tip: Looking for a nice color? Here's a one-liner to print colormap.
#
# for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done
# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases' ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob' ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
() {
emulate -L zsh -o extended_glob
# Unset all configuration options. This allows you to apply configuration changes without
# restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'
# Zsh >= 5.1 is required.
[[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return
# The list of segments shown on the left. Fill it with the most important segments.
typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
os_icon # os identifier
dir # current directory
vcs # git status
# prompt_char # prompt symbol
)
# The list of segments shown on the right. Fill it with less important segments.
# Right prompt on the last prompt line (where you are typing your commands) gets
# automatically hidden when the input line reaches it. Right prompt above the
# last prompt line gets hidden if it would overlap with left prompt.
typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
status # exit code of the last command
command_execution_time # duration of the last command
background_jobs # presence of background jobs
direnv # direnv status (https://direnv.net/)
asdf # asdf version manager (https://github.com/asdf-vm/asdf)
virtualenv # python virtual environment (https://docs.python.org/3/library/venv.html)
anaconda # conda environment (https://conda.io/)
pyenv # python environment (https://github.com/pyenv/pyenv)
goenv # go environment (https://github.com/syndbg/goenv)
nodenv # node.js version from nodenv (https://github.com/nodenv/nodenv)
nvm # node.js version from nvm (https://github.com/nvm-sh/nvm)
nodeenv # node.js environment (https://github.com/ekalinin/nodeenv)
# node_version # node.js version
# go_version # go version (https://golang.org)
# rust_version # rustc version (https://www.rust-lang.org)
# dotnet_version # .NET version (https://dotnet.microsoft.com)
# php_version # php version (https://www.php.net/)
# laravel_version # laravel php framework version (https://laravel.com/)
# java_version # java version (https://www.java.com/)
# package # name@version from package.json (https://docs.npmjs.com/files/package.json)
rbenv # ruby version from rbenv (https://github.com/rbenv/rbenv)
rvm # ruby version from rvm (https://rvm.io)
fvm # flutter version management (https://github.com/leoafarias/fvm)
luaenv # lua version from luaenv (https://github.com/cehoffman/luaenv)
jenv # java version from jenv (https://github.com/jenv/jenv)
plenv # perl version from plenv (https://github.com/tokuhirom/plenv)
perlbrew # perl version from perlbrew (https://github.com/gugod/App-perlbrew)
phpenv # php version from phpenv (https://github.com/phpenv/phpenv)
scalaenv # scala version from scalaenv (https://github.com/scalaenv/scalaenv)
haskell_stack # haskell version from stack (https://haskellstack.org/)
kubecontext # current kubernetes context (https://kubernetes.io/)
terraform # terraform workspace (https://www.terraform.io)
# terraform_version # terraform version (https://www.terraform.io)
aws # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
aws_eb_env # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
azure # azure account name (https://docs.microsoft.com/en-us/cli/azure)
gcloud # google cloud cli account and project (https://cloud.google.com/)
google_app_cred # google application credentials (https://cloud.google.com/docs/authentication/production)
toolbox # toolbox name (https://github.com/containers/toolbox)
# context # user@hostname
nordvpn # nordvpn connection status, linux only (https://nordvpn.com/)
ranger # ranger shell (https://github.com/ranger/ranger)
nnn # nnn shell (https://github.com/jarun/nnn)
lf # lf shell (https://github.com/gokcehan/lf)
xplr # xplr shell (https://github.com/sayanarijit/xplr)
vim_shell # vim shell indicator (:sh)
midnight_commander # midnight commander shell (https://midnight-commander.org/)
nix_shell # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
chezmoi_shell # chezmoi shell (https://www.chezmoi.io/)
vi_mode # vi mode (you don't need this if you've enabled prompt_char)
# vpn_ip # virtual private network indicator
# load # CPU load
# disk_usage # disk usage
# ram # free RAM
# swap # used swap
todo # todo items (https://github.com/todotxt/todo.txt-cli)
timewarrior # timewarrior tracking status (https://timewarrior.net/)
taskwarrior # taskwarrior task count (https://taskwarrior.org/)
per_directory_history # Oh My Zsh per-directory-history local/global indicator
# cpu_arch # CPU architecture
# time # current time
# ip # ip address and bandwidth usage for a specified network interface
# public_ip # public IP address
# proxy # system-wide http/https/ftp proxy
# battery # internal battery
# wifi # wifi speed
# example # example user-defined segment (see prompt_example function below)
)
# Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
typeset -g POWERLEVEL9K_MODE=nerdfont-complete
# When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
# icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
typeset -g POWERLEVEL9K_ICON_PADDING=none
# When set to true, icons appear before content on both sides of the prompt. When set
# to false, icons go after content. If empty or not set, icons go before content in the left
# prompt and after content in the right prompt.
#
# You can also override it for a specific segment:
#
# POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
#
# Or for a specific segment in specific state:
#
# POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=
# Add an empty line before each prompt.
typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
# Connect left prompt lines with these symbols. You'll probably want to use the same color
# as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%242F╭─'
typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%242F├─'
typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%242F╰─'
# Connect right prompt lines with these symbols.
typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%242F─╮'
typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%242F─┤'
typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%242F─╯'
# Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
# '─'. The last two make it easier to see the alignment between left and right prompt and to
# separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
# for more compact prompt if using this option.
typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_GAP_BACKGROUND=
if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
# The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
# ornaments defined above.
typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=242
# Start filler from the edge of the screen if there are no left segments on the first line.
typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
# End filler on the edge of the screen if there are no right segments on the first line.
typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
fi
# Separator between same-color segments on the left.
typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='\uE0B1'
# Separator between same-color segments on the right.
typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='\uE0B3'
# Separator between different-color segments on the left.
typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0'
# Separator between different-color segments on the right.
typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
# To remove a separator between two segments, add "_joined" to the second segment name.
# For example: POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(os_icon context_joined)
# The right end of left prompt.
typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
# The left end of right prompt.
typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
# The left end of left prompt.
typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
# The right end of right prompt.
typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
# Left prompt terminator for lines without any segments.
typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
#################################[ os_icon: os identifier ]##################################
# OS identifier color.
typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=232
typeset -g POWERLEVEL9K_OS_ICON_BACKGROUND=7
# Custom icon.
# typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐'
################################[ prompt_char: prompt symbol ]################################
# Transparent background.
typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
# Green prompt symbol if the last command succeeded.
typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76
# Red prompt symbol if the last command failed.
typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
# Default prompt symbol.
typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
# Prompt symbol in command vi mode.
typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
# Prompt symbol in visual vi mode.
typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
# Prompt symbol in overwrite vi mode.
typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
# No line terminator if prompt_char is the last segment.
typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
# No line introducer if prompt_char is the first segment.
typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
# No surrounding whitespace.
typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=
##################################[ dir: current directory ]##################################
# Current directory background color.
typeset -g POWERLEVEL9K_DIR_BACKGROUND=4
# Default current directory foreground color.
typeset -g POWERLEVEL9K_DIR_FOREGROUND=254
# If directory is too long, shorten some of its segments to the shortest possible unique
# prefix. The shortened directory can be tab-completed to the original.
typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
# Replace removed segment suffixes with this symbol.
typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
# Color of the shortened directory segments.
typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=250
# Color of the anchor directory segments. Anchor segments are never shortened. The first
# segment is always an anchor.
typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=255
# Display anchor directory segments in bold.
typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true
# Don't shorten directories that contain any of these files. They are anchors.
local anchor_files=(
.bzr
.citc
.git
.hg
.node-version
.python-version
.go-version
.ruby-version
.lua-version
.java-version
.perl-version
.php-version
.tool-version
.shorten_folder_marker
.svn
.terraform
CVS
Cargo.toml
composer.json
go.mod
package.json
stack.yaml
)
typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
# If set to "first" ("last"), remove everything before the first (last) subdirectory that contains
# files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
# /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first)
# or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers
# and other directories don't.
#
# Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer.
# This moves the truncation point to the right (positive offset) or to the left (negative offset)
# relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0"
# respectively.
typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
# Don't shorten this many last directory segments. They are anchors.
typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
# Shorten directory if it's longer than this even if there is space for it. The value can
# be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
# directory will be shortened only when prompt doesn't fit or when other parameters demand it
# (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
# If set to `0`, directory will always be shortened to its minimum length.
typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
# When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
# many columns for typing commands.
typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
# When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
# COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
# If set to true, embed a hyperlink into the directory. Useful for quickly
# opening a directory in the file manager simply by clicking the link.
# Can also be handy when the directory is shortened, as it allows you to see
# the full directory that was used in previous commands.
typeset -g POWERLEVEL9K_DIR_HYPERLINK=false
# Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON
# and POWERLEVEL9K_DIR_CLASSES below.
typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3
# The default icon shown next to non-writable and non-existent directories when
# POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
# typeset -g POWERLEVEL9K_LOCK_ICON='⭐'
# POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
# directories. It must be an array with 3 * N elements. Each triplet consists of:
#
# 1. A pattern against which the current directory ($PWD) is matched. Matching is done with
# extended_glob option enabled.
# 2. Directory class for the purpose of styling.
# 3. An empty string.
#
# Triplets are tried in order. The first triplet whose pattern matches $PWD wins.
#
# If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories
# acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_DIR_CLASSES=(
# '~/work(|/*)' WORK ''
# '~(|/*)' HOME ''
# '*' DEFAULT '')
#
# Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one
# of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or
# WORK_NON_EXISTENT.
#
# Simply assigning classes to directories doesn't have any visible effects. It merely gives you an
# option to define custom colors and icons for different directory classes.
#
# # Styling for WORK.
# typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_DIR_WORK_BACKGROUND=4
# typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=254
# typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=250
# typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=255
#
# # Styling for WORK_NOT_WRITABLE.
# typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_BACKGROUND=4
# typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=254
# typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=250
# typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=255
#
# # Styling for WORK_NON_EXISTENT.
# typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_BACKGROUND=4
# typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=254
# typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=250
# typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=255
#
# If a styling parameter isn't explicitly defined for some class, it falls back to the classless
# parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls
# back to POWERLEVEL9K_DIR_FOREGROUND.
#
# typeset -g POWERLEVEL9K_DIR_CLASSES=()
# Custom prefix.
# typeset -g POWERLEVEL9K_DIR_PREFIX='in '
#####################################[ vcs: git status ]######################################
# Version control background colors.
typeset -g POWERLEVEL9K_VCS_CLEAN_BACKGROUND=2
typeset -g POWERLEVEL9K_VCS_MODIFIED_BACKGROUND=3
typeset -g POWERLEVEL9K_VCS_UNTRACKED_BACKGROUND=2
typeset -g POWERLEVEL9K_VCS_CONFLICTED_BACKGROUND=3
typeset -g POWERLEVEL9K_VCS_LOADING_BACKGROUND=8
# Branch icon. Set this parameter to '\UE0A0 ' for the popular Powerline branch icon.
typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\uF126 '
# Untracked files icon. It's really a question mark, your font isn't broken.
# Change the value of this parameter to show a different icon.
typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
# Formatter for Git status.
#
# Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
#
# You can edit the function to customize how Git status looks.
#
# VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
# https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
function my_git_formatter() {
emulate -L zsh
if [[ -n $P9K_CONTENT ]]; then
# If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
# gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
typeset -g my_git_format=$P9K_CONTENT
return
fi
# Styling for different parts of Git status.
local meta='%7F' # white foreground
local clean='%0F' # black foreground
local modified='%0F' # black foreground
local untracked='%0F' # black foreground
local conflicted='%1F' # red foreground
local res
if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
# If local branch name is at most 32 characters long, show it in full.
# Otherwise show the first 12 ... the last 12.
# Tip: To always show local branch name in full without truncation, delete the next line.
(( $#branch > 32 )) && branch[13,-13]="..." # <-- this line
res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
fi
if [[ -n $VCS_STATUS_TAG
# Show tag only if not on a branch.
# Tip: To always show tag, delete the next line.
&& -z $VCS_STATUS_LOCAL_BRANCH # <-- this line
]]; then
local tag=${(V)VCS_STATUS_TAG}
# If tag name is at most 32 characters long, show it in full.
# Otherwise show the first 12 ... the last 12.
# Tip: To always show tag name in full without truncation, delete the next line.
(( $#tag > 32 )) && tag[13,-13]="..." # <-- this line
res+="${meta}#${clean}${tag//\%/%%}"
fi
# Display the current Git commit if there is no branch and no tag.
# Tip: To always display the current Git commit, delete the next line.
[[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] && # <-- this line
res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"
# Show tracking branch name if it differs from local branch.
if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
fi
# Display "wip" if the latest commit's summary contains "wip" or "WIP".
if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then
res+=" ${modified}wip"
fi
if (( VCS_STATUS_COMMITS_AHEAD || VCS_STATUS_COMMITS_BEHIND )); then
# ⇣42 if behind the remote.
(( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
# ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
(( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
(( VCS_STATUS_COMMITS_AHEAD )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
elif [[ -n $VCS_STATUS_REMOTE_BRANCH ]]; then
# Tip: Uncomment the next line to display '=' if up to date with the remote.
# res+=" ${clean}="
fi
# ⇠42 if behind the push remote.
(( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
(( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
# ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
(( VCS_STATUS_PUSH_COMMITS_AHEAD )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
# *42 if have stashes.
(( VCS_STATUS_STASHES )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
# 'merge' if the repo is in an unusual state.
[[ -n $VCS_STATUS_ACTION ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
# ~42 if have merge conflicts.
(( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
# +42 if have staged changes.
(( VCS_STATUS_NUM_STAGED )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
# !42 if have unstaged changes.
(( VCS_STATUS_NUM_UNSTAGED )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
# ?42 if have untracked files. It's really a question mark, your font isn't broken.
# See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
# Remove the next line if you don't want to see untracked files at all.
(( VCS_STATUS_NUM_UNTRACKED )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
# "─" if the number of unstaged files is unknown. This can happen due to
# POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
# than the number of files in the Git index, or due to bash.showDirtyState being set to false
# in the repository config. The number of staged and untracked files may also be unknown
# in this case.
(( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
typeset -g my_git_format=$res
}
functions -M my_git_formatter 2>/dev/null
# Don't count the number of unstaged, untracked and conflicted files in Git repositories with
# more than this many files in the index. Negative value means infinity.
#
# If you are working in Git repositories with tens of millions of files and seeing performance
# sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
# of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
# config: `git config bash.showDirtyState false`.
typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1
# Don't show Git status in prompt for repositories whose workdir matches this pattern.
# For example, if set to '~', the Git repository at $HOME/.git will be ignored.
# Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'
# Disable the default Git status formatting.
typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
# Install our own Git status formatter.
typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter()))+${my_git_format}}'
# Enable counters for staged, unstaged, etc.
typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1
# Custom icon.
# typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Custom prefix.
# typeset -g POWERLEVEL9K_VCS_PREFIX='on '
# Show status of repositories of these types. You can add svn and/or hg if you are
# using them. If you do, your prompt may become slow even when your current directory
# isn't in an svn or hg repository.
typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)
##########################[ status: exit code of the last command ]###########################
# Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
# style them independently from the regular OK and ERROR state.
typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true
# Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
# it will signify success by turning green.
typeset -g POWERLEVEL9K_STATUS_OK=true
typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
typeset -g POWERLEVEL9K_STATUS_OK_BACKGROUND=0
# Status when some part of a pipe command fails but the overall exit status is zero. It may look
# like this: 1|0.
typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
typeset -g POWERLEVEL9K_STATUS_OK_PIPE_BACKGROUND=0
# Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
# it will signify error by turning red.
typeset -g POWERLEVEL9K_STATUS_ERROR=true
typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=3
typeset -g POWERLEVEL9K_STATUS_ERROR_BACKGROUND=1
# Status when the last command was terminated by a signal.
typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
# Use terse signal names: "INT" instead of "SIGINT(2)".
typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=3
typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_BACKGROUND=1
# Status when some part of a pipe command fails and the overall exit status is also non-zero.
# It may look like this: 1|0.
typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=3
typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_BACKGROUND=1
###################[ command_execution_time: duration of the last command ]###################
# Execution time color.
typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=0
typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_BACKGROUND=3
# Show duration of the last command if takes at least this many seconds.
typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
# Show this many fractional digits. Zero means round to seconds.
typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
# Duration format: 1d 2h 3m 4s.
typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
# Custom icon.
# typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Custom prefix.
# typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='took '
#######################[ background_jobs: presence of background jobs ]#######################
# Background jobs color.
typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=6
typeset -g POWERLEVEL9K_BACKGROUND_JOBS_BACKGROUND=0
# Don't show the number of background jobs.
typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
# Custom icon.
# typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'
#######################[ direnv: direnv status (https://direnv.net/) ]########################
# Direnv color.
typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3
typeset -g POWERLEVEL9K_DIRENV_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]###############
# Default asdf color. Only used to display tools for which there is no color override (see below).
# Tip: Override these parameters for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_FOREGROUND and
# POWERLEVEL9K_ASDF_${TOOL}_BACKGROUND.
typeset -g POWERLEVEL9K_ASDF_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_BACKGROUND=7
# There are four parameters that can be used to hide asdf tools. Each parameter describes
# conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at
# least one parameter decides to hide a tool, that tool gets hidden. If no parameter decides to
# hide a tool, it gets shown.
#
# Special note on the difference between POWERLEVEL9K_ASDF_SOURCES and
# POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW. Consider the effect of the following commands:
#
# asdf local python 3.8.1
# asdf global python 3.8.1
#
# After running both commands the current python version is 3.8.1 and its source is "local" as
# it takes precedence over "global". If POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW is set to false,
# it'll hide python version in this case because 3.8.1 is the same as the global version.
# POWERLEVEL9K_ASDF_SOURCES will hide python version only if the value of this parameter doesn't
# contain "local".
# Hide tool versions that don't come from one of these sources.
#
# Available sources:
#
# - shell `asdf current` says "set by ASDF_${TOOL}_VERSION environment variable"
# - local `asdf current` says "set by /some/not/home/directory/file"
# - global `asdf current` says "set by /home/username/file"
#
# Note: If this parameter is set to (shell local global), it won't hide tools.
# Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SOURCES.
typeset -g POWERLEVEL9K_ASDF_SOURCES=(shell local global)
# If set to false, hide tool versions that are the same as global.
#
# Note: The name of this parameter doesn't reflect its meaning at all.
# Note: If this parameter is set to true, it won't hide tools.
# Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_PROMPT_ALWAYS_SHOW.
typeset -g POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW=false
# If set to false, hide tool versions that are equal to "system".
#
# Note: If this parameter is set to true, it won't hide tools.
# Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_SYSTEM.
typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true
# If set to non-empty value, hide tools unless there is a file matching the specified file pattern
# in the current directory, or its parent directory, or its grandparent directory, and so on.
#
# Note: If this parameter is set to empty value, it won't hide tools.
# Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments.
# Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_ON_UPGLOB.
#
# Example: Hide nodejs version when there is no package.json and no *.js files in the current
# directory, in `..`, in `../..` and so on.
#
# typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.js|package.json'
typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB=
# Ruby version from asdf.
typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_RUBY_BACKGROUND=1
# typeset -g POWERLEVEL9K_ASDF_RUBY_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_RUBY_SHOW_ON_UPGLOB='*.foo|*.bar'
# Python version from asdf.
typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_PYTHON_BACKGROUND=4
# typeset -g POWERLEVEL9K_ASDF_PYTHON_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_PYTHON_SHOW_ON_UPGLOB='*.foo|*.bar'
# Go version from asdf.
typeset -g POWERLEVEL9K_ASDF_GOLANG_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_GOLANG_BACKGROUND=4
# typeset -g POWERLEVEL9K_ASDF_GOLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_GOLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
# Node.js version from asdf.
typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_NODEJS_BACKGROUND=2
# typeset -g POWERLEVEL9K_ASDF_NODEJS_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.foo|*.bar'
# Rust version from asdf.
typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_RUST_BACKGROUND=208
# typeset -g POWERLEVEL9K_ASDF_RUST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_RUST_SHOW_ON_UPGLOB='*.foo|*.bar'
# .NET Core version from asdf.
typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_BACKGROUND=5
# typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar'
# Flutter version from asdf.
typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_FLUTTER_BACKGROUND=4
# typeset -g POWERLEVEL9K_ASDF_FLUTTER_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_FLUTTER_SHOW_ON_UPGLOB='*.foo|*.bar'
# Lua version from asdf.
typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_LUA_BACKGROUND=4
# typeset -g POWERLEVEL9K_ASDF_LUA_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_LUA_SHOW_ON_UPGLOB='*.foo|*.bar'
# Java version from asdf.
typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=1
typeset -g POWERLEVEL9K_ASDF_JAVA_BACKGROUND=7
# typeset -g POWERLEVEL9K_ASDF_JAVA_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_JAVA_SHOW_ON_UPGLOB='*.foo|*.bar'
# Perl version from asdf.
typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_PERL_BACKGROUND=4
# typeset -g POWERLEVEL9K_ASDF_PERL_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_PERL_SHOW_ON_UPGLOB='*.foo|*.bar'
# Erlang version from asdf.
typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_ERLANG_BACKGROUND=1
# typeset -g POWERLEVEL9K_ASDF_ERLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_ERLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
# Elixir version from asdf.
typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_ELIXIR_BACKGROUND=5
# typeset -g POWERLEVEL9K_ASDF_ELIXIR_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_ELIXIR_SHOW_ON_UPGLOB='*.foo|*.bar'
# Postgres version from asdf.
typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_POSTGRES_BACKGROUND=6
# typeset -g POWERLEVEL9K_ASDF_POSTGRES_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_POSTGRES_SHOW_ON_UPGLOB='*.foo|*.bar'
# PHP version from asdf.
typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_PHP_BACKGROUND=5
# typeset -g POWERLEVEL9K_ASDF_PHP_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_PHP_SHOW_ON_UPGLOB='*.foo|*.bar'
# Haskell version from asdf.
typeset -g POWERLEVEL9K_ASDF_HASKELL_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_HASKELL_BACKGROUND=3
# typeset -g POWERLEVEL9K_ASDF_HASKELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_HASKELL_SHOW_ON_UPGLOB='*.foo|*.bar'
# Julia version from asdf.
typeset -g POWERLEVEL9K_ASDF_JULIA_FOREGROUND=0
typeset -g POWERLEVEL9K_ASDF_JULIA_BACKGROUND=2
# typeset -g POWERLEVEL9K_ASDF_JULIA_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_ASDF_JULIA_SHOW_ON_UPGLOB='*.foo|*.bar'
##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]###########
# NordVPN connection indicator color.
typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=7
typeset -g POWERLEVEL9K_NORDVPN_BACKGROUND=4
# Hide NordVPN connection indicator when not connected.
typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION=
typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION=
# Custom icon.
# typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐'
#################[ ranger: ranger shell (https://github.com/ranger/ranger) ]##################
# Ranger shell color.
typeset -g POWERLEVEL9K_RANGER_FOREGROUND=3
typeset -g POWERLEVEL9K_RANGER_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]#######################
# Nnn shell color.
typeset -g POWERLEVEL9K_NNN_FOREGROUND=0
typeset -g POWERLEVEL9K_NNN_BACKGROUND=6
# Custom icon.
# typeset -g POWERLEVEL9K_NNN_VISUAL_IDENTIFIER_EXPANSION='⭐'
######################[ lf: lf shell (https://github.com/gokcehan/lf) ]#######################
# lf shell color.
typeset -g POWERLEVEL9K_LF_FOREGROUND=0
typeset -g POWERLEVEL9K_LF_BACKGROUND=6
# Custom icon.
# typeset -g POWERLEVEL9K_LF_VISUAL_IDENTIFIER_EXPANSION='⭐'
##################[ xplr: xplr shell (https://github.com/sayanarijit/xplr) ]##################
# xplr shell color.
typeset -g POWERLEVEL9K_XPLR_FOREGROUND=0
typeset -g POWERLEVEL9K_XPLR_BACKGROUND=6
# Custom icon.
# typeset -g POWERLEVEL9K_XPLR_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########################[ vim_shell: vim shell indicator (:sh) ]###########################
# Vim shell indicator color.
typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=0
typeset -g POWERLEVEL9K_VIM_SHELL_BACKGROUND=2
# Custom icon.
# typeset -g POWERLEVEL9K_VIM_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
######[ midnight_commander: midnight commander shell (https://midnight-commander.org/) ]######
# Midnight Commander shell color.
typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_FOREGROUND=3
typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_MIDNIGHT_COMMANDER_VISUAL_IDENTIFIER_EXPANSION='⭐'
#[ nix_shell: nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) ]##
# Nix shell color.
typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=0
typeset -g POWERLEVEL9K_NIX_SHELL_BACKGROUND=4
# Display the icon of nix_shell if PATH contains a subdirectory of /nix/store.
# typeset -g POWERLEVEL9K_NIX_SHELL_INFER_FROM_PATH=false
# Tip: If you want to see just the icon without "pure" and "impure", uncomment the next line.
# typeset -g POWERLEVEL9K_NIX_SHELL_CONTENT_EXPANSION=
# Custom icon.
# typeset -g POWERLEVEL9K_NIX_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
##################[ chezmoi_shell: chezmoi shell (https://www.chezmoi.io/) ]##################
# chezmoi shell color.
typeset -g POWERLEVEL9K_CHEZMOI_SHELL_FOREGROUND=0
typeset -g POWERLEVEL9K_CHEZMOI_SHELL_BACKGROUND=4
# Custom icon.
# typeset -g POWERLEVEL9K_CHEZMOI_SHELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
##################################[ disk_usage: disk usage ]##################################
# Colors for different levels of disk usage.
typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_FOREGROUND=3
typeset -g POWERLEVEL9K_DISK_USAGE_NORMAL_BACKGROUND=0
typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_FOREGROUND=0
typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_BACKGROUND=3
typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_FOREGROUND=7
typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_BACKGROUND=1
# Thresholds for different levels of disk usage (percentage points).
typeset -g POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL=90
typeset -g POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL=95
# If set to true, hide disk usage when below $POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL percent.
typeset -g POWERLEVEL9K_DISK_USAGE_ONLY_WARNING=false
# Custom icon.
# typeset -g POWERLEVEL9K_DISK_USAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]###########
# Foreground color.
typeset -g POWERLEVEL9K_VI_MODE_FOREGROUND=0
# Text and color for normal (a.k.a. command) vi mode.
typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=NORMAL
typeset -g POWERLEVEL9K_VI_MODE_NORMAL_BACKGROUND=2
# Text and color for visual vi mode.
typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VISUAL
typeset -g POWERLEVEL9K_VI_MODE_VISUAL_BACKGROUND=4
# Text and color for overtype (a.k.a. overwrite and replace) vi mode.
typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVERTYPE
typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_BACKGROUND=3
# Text and color for insert vi mode.
typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=
typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=8
######################################[ ram: free RAM ]#######################################
# RAM color.
typeset -g POWERLEVEL9K_RAM_FOREGROUND=0
typeset -g POWERLEVEL9K_RAM_BACKGROUND=3
# Custom icon.
# typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION='⭐'
#####################################[ swap: used swap ]######################################
# Swap color.
typeset -g POWERLEVEL9K_SWAP_FOREGROUND=0
typeset -g POWERLEVEL9K_SWAP_BACKGROUND=3
# Custom icon.
# typeset -g POWERLEVEL9K_SWAP_VISUAL_IDENTIFIER_EXPANSION='⭐'
######################################[ load: CPU load ]######################################
# Show average CPU load over this many last minutes. Valid values are 1, 5 and 15.
typeset -g POWERLEVEL9K_LOAD_WHICH=5
# Load color when load is under 50%.
typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=0
typeset -g POWERLEVEL9K_LOAD_NORMAL_BACKGROUND=2
# Load color when load is between 50% and 70%.
typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=0
typeset -g POWERLEVEL9K_LOAD_WARNING_BACKGROUND=3
# Load color when load is over 70%.
typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=0
typeset -g POWERLEVEL9K_LOAD_CRITICAL_BACKGROUND=1
# Custom icon.
# typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐'
################[ todo: todo items (https://github.com/todotxt/todo.txt-cli) ]################
# Todo color.
typeset -g POWERLEVEL9K_TODO_FOREGROUND=0
typeset -g POWERLEVEL9K_TODO_BACKGROUND=8
# Hide todo when the total number of tasks is zero.
typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_TOTAL=true
# Hide todo when the number of tasks after filtering is zero.
typeset -g POWERLEVEL9K_TODO_HIDE_ZERO_FILTERED=false
# Todo format. The following parameters are available within the expansion.
#
# - P9K_TODO_TOTAL_TASK_COUNT The total number of tasks.
# - P9K_TODO_FILTERED_TASK_COUNT The number of tasks after filtering.
#
# These variables correspond to the last line of the output of `todo.sh -p ls`:
#
# TODO: 24 of 42 tasks shown
#
# Here 24 is P9K_TODO_FILTERED_TASK_COUNT and 42 is P9K_TODO_TOTAL_TASK_COUNT.
#
# typeset -g POWERLEVEL9K_TODO_CONTENT_EXPANSION='$P9K_TODO_FILTERED_TASK_COUNT'
# Custom icon.
# typeset -g POWERLEVEL9K_TODO_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############
# Timewarrior color.
typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=255
typeset -g POWERLEVEL9K_TIMEWARRIOR_BACKGROUND=8
# If the tracked task is longer than 24 characters, truncate and append "...".
# Tip: To always display tasks without truncation, delete the following parameter.
# Tip: To hide task names and display just the icon when time tracking is enabled, set the
# value of the following parameter to "".
typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+...}'
# Custom icon.
# typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
##############[ taskwarrior: taskwarrior task count (https://taskwarrior.org/) ]##############
# Taskwarrior color.
typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=0
typeset -g POWERLEVEL9K_TASKWARRIOR_BACKGROUND=6
# Taskwarrior segment format. The following parameters are available within the expansion.
#
# - P9K_TASKWARRIOR_PENDING_COUNT The number of pending tasks: `task +PENDING count`.
# - P9K_TASKWARRIOR_OVERDUE_COUNT The number of overdue tasks: `task +OVERDUE count`.
#
# Zero values are represented as empty parameters.
#
# The default format:
#
# '${P9K_TASKWARRIOR_OVERDUE_COUNT:+"!$P9K_TASKWARRIOR_OVERDUE_COUNT/"}$P9K_TASKWARRIOR_PENDING_COUNT'
#
# typeset -g POWERLEVEL9K_TASKWARRIOR_CONTENT_EXPANSION='$P9K_TASKWARRIOR_PENDING_COUNT'
# Custom icon.
# typeset -g POWERLEVEL9K_TASKWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
######[ per_directory_history: Oh My Zsh per-directory-history local/global indicator ]#######
# Color when using local/global history.
typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_FOREGROUND=0
typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_BACKGROUND=5
typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_FOREGROUND=0
typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_BACKGROUND=3
# Tip: Uncomment the next two lines to hide "local"/"global" text and leave just the icon.
# typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_CONTENT_EXPANSION=''
# typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_CONTENT_EXPANSION=''
# Custom icon.
# typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_LOCAL_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_PER_DIRECTORY_HISTORY_GLOBAL_VISUAL_IDENTIFIER_EXPANSION='⭐'
################################[ cpu_arch: CPU architecture ]################################
# CPU architecture color.
typeset -g POWERLEVEL9K_CPU_ARCH_FOREGROUND=0
typeset -g POWERLEVEL9K_CPU_ARCH_BACKGROUND=3
# Hide the segment when on a specific CPU architecture.
# typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_CONTENT_EXPANSION=
# typeset -g POWERLEVEL9K_CPU_ARCH_X86_64_VISUAL_IDENTIFIER_EXPANSION=
# Custom icon.
# typeset -g POWERLEVEL9K_CPU_ARCH_VISUAL_IDENTIFIER_EXPANSION='⭐'
##################################[ context: user@hostname ]##################################
# Context color when running with privileges.
typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
typeset -g POWERLEVEL9K_CONTEXT_ROOT_BACKGROUND=0
# Context color in SSH without privileges.
typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=3
typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_BACKGROUND=0
# Default context color (no privileges, no SSH).
typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=3
typeset -g POWERLEVEL9K_CONTEXT_BACKGROUND=0
# Context format when running with privileges: user@hostname.
typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'
# Context format when in SSH without privileges: user@hostname.
typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m'
# Default context format (no privileges, no SSH): user@hostname.
typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'
# Don't show context unless running with privileges or in SSH.
# Tip: Remove the next line to always show context.
typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
# Custom icon.
# typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Custom prefix.
# typeset -g POWERLEVEL9K_CONTEXT_PREFIX='with '
###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
# Python virtual environment color.
typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=0
typeset -g POWERLEVEL9K_VIRTUALENV_BACKGROUND=4
# Don't show Python version next to the virtual environment name.
typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
# If set to "false", won't show virtualenv if pyenv is already shown.
# If set to "if-different", won't show virtualenv if it's the same as pyenv.
typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_WITH_PYENV=false
# Separate environment name from Python version only with a space.
typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
# Custom icon.
# typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
#####################[ anaconda: conda environment (https://conda.io/) ]######################
# Anaconda environment color.
typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=0
typeset -g POWERLEVEL9K_ANACONDA_BACKGROUND=4
# Anaconda segment format. The following parameters are available within the expansion.
#
# - CONDA_PREFIX Absolute path to the active Anaconda/Miniconda environment.
# - CONDA_DEFAULT_ENV Name of the active Anaconda/Miniconda environment.
# - CONDA_PROMPT_MODIFIER Configurable prompt modifier (see below).
# - P9K_ANACONDA_PYTHON_VERSION Current python version (python --version).
#
# CONDA_PROMPT_MODIFIER can be configured with the following command:
#
# conda config --set env_prompt '({default_env}) '
#
# The last argument is a Python format string that can use the following variables:
#
# - prefix The same as CONDA_PREFIX.
# - default_env The same as CONDA_DEFAULT_ENV.
# - name The last segment of CONDA_PREFIX.
# - stacked_env Comma-separated list of names in the environment stack. The first element is
# always the same as default_env.
#
# Note: '({default_env}) ' is the default value of env_prompt.
#
# The default value of POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION expands to $CONDA_PROMPT_MODIFIER
# without the surrounding parentheses, or to the last path component of CONDA_PREFIX if the former
# is empty.
typeset -g POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION='${${${${CONDA_PROMPT_MODIFIER#\(}% }%\)}:-${CONDA_PREFIX:t}}'
# Custom icon.
# typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐'
################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################
# Pyenv color.
typeset -g POWERLEVEL9K_PYENV_FOREGROUND=0
typeset -g POWERLEVEL9K_PYENV_BACKGROUND=4
# Hide python version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global)
# If set to false, hide python version if it's the same as global:
# $(pyenv version-name) == $(pyenv global).
typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide python version if it's equal to "system".
typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true
# Pyenv segment format. The following parameters are available within the expansion.
#
# - P9K_CONTENT Current pyenv environment (pyenv version-name).
# - P9K_PYENV_PYTHON_VERSION Current python version (python --version).
#
# The default format has the following logic:
#
# 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or
# starts with "$P9K_PYENV_PYTHON_VERSION/".
# 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION".
typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}'
# Custom icon.
# typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
################[ goenv: go environment (https://github.com/syndbg/goenv) ]################
# Goenv color.
typeset -g POWERLEVEL9K_GOENV_FOREGROUND=0
typeset -g POWERLEVEL9K_GOENV_BACKGROUND=4
# Hide go version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global)
# If set to false, hide go version if it's the same as global:
# $(goenv version-name) == $(goenv global).
typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide go version if it's equal to "system".
typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]##########
# Nodenv color.
typeset -g POWERLEVEL9K_NODENV_FOREGROUND=2
typeset -g POWERLEVEL9K_NODENV_BACKGROUND=0
# Hide node version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global)
# If set to false, hide node version if it's the same as global:
# $(nodenv version-name) == $(nodenv global).
typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide node version if it's equal to "system".
typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]###############
# Nvm color.
typeset -g POWERLEVEL9K_NVM_FOREGROUND=0
typeset -g POWERLEVEL9K_NVM_BACKGROUND=5
# If set to false, hide node version if it's the same as default:
# $(nvm version current) == $(nvm version default).
typeset -g POWERLEVEL9K_NVM_PROMPT_ALWAYS_SHOW=false
# If set to false, hide node version if it's equal to "system".
typeset -g POWERLEVEL9K_NVM_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############
# Nodeenv color.
typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=2
typeset -g POWERLEVEL9K_NODEENV_BACKGROUND=0
# Don't show Node version next to the environment name.
typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false
# Separate environment name from Node version only with a space.
typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER=
# Custom icon.
# typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
##############################[ node_version: node.js version ]###############################
# Node version color.
typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=7
typeset -g POWERLEVEL9K_NODE_VERSION_BACKGROUND=2
# Show node version only when in a directory tree containing package.json.
typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true
# Custom icon.
# typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
#######################[ go_version: go version (https://golang.org) ]########################
# Go version color.
typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=255
typeset -g POWERLEVEL9K_GO_VERSION_BACKGROUND=2
# Show go version only when in a go project subdirectory.
typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true
# Custom icon.
# typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
#################[ rust_version: rustc version (https://www.rust-lang.org) ]##################
# Rust version color.
typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=0
typeset -g POWERLEVEL9K_RUST_VERSION_BACKGROUND=208
# Show rust version only when in a rust project subdirectory.
typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true
# Custom icon.
# typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
# .NET version color.
typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=7
typeset -g POWERLEVEL9K_DOTNET_VERSION_BACKGROUND=5
# Show .NET version only when in a .NET project subdirectory.
typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
# Custom icon.
# typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
#####################[ php_version: php version (https://www.php.net/) ]######################
# PHP version color.
typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=0
typeset -g POWERLEVEL9K_PHP_VERSION_BACKGROUND=5
# Show PHP version only when in a PHP project subdirectory.
typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true
# Custom icon.
# typeset -g POWERLEVEL9K_PHP_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ laravel_version: laravel php framework version (https://laravel.com/) ]###########
# Laravel version color.
typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=1
typeset -g POWERLEVEL9K_LARAVEL_VERSION_BACKGROUND=7
# Custom icon.
# typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
#############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
# Rbenv color.
typeset -g POWERLEVEL9K_RBENV_FOREGROUND=0
typeset -g POWERLEVEL9K_RBENV_BACKGROUND=1
# Hide ruby version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global)
# If set to false, hide ruby version if it's the same as global:
# $(rbenv version-name) == $(rbenv global).
typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide ruby version if it's equal to "system".
typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
####################[ java_version: java version (https://www.java.com/) ]####################
# Java version color.
typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=1
typeset -g POWERLEVEL9K_JAVA_VERSION_BACKGROUND=7
# Show java version only when in a java project subdirectory.
typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true
# Show brief version.
typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false
# Custom icon.
# typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]####
# Package color.
typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=0
typeset -g POWERLEVEL9K_PACKAGE_BACKGROUND=6
# Package format. The following parameters are available within the expansion.
#
# - P9K_PACKAGE_NAME The value of `name` field in package.json.
# - P9K_PACKAGE_VERSION The value of `version` field in package.json.
#
# typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}'
# Custom icon.
# typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
#######################[ rvm: ruby version from rvm (https://rvm.io) ]########################
# Rvm color.
typeset -g POWERLEVEL9K_RVM_FOREGROUND=0
typeset -g POWERLEVEL9K_RVM_BACKGROUND=240
# Don't show @gemset at the end.
typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false
# Don't show ruby- at the front.
typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false
# Custom icon.
# typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############
# Fvm color.
typeset -g POWERLEVEL9K_FVM_FOREGROUND=0
typeset -g POWERLEVEL9K_FVM_BACKGROUND=4
# Custom icon.
# typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]###########
# Lua color.
typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=0
typeset -g POWERLEVEL9K_LUAENV_BACKGROUND=4
# Hide lua version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global)
# If set to false, hide lua version if it's the same as global:
# $(luaenv version-name) == $(luaenv global).
typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide lua version if it's equal to "system".
typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################
# Java color.
typeset -g POWERLEVEL9K_JENV_FOREGROUND=1
typeset -g POWERLEVEL9K_JENV_BACKGROUND=7
# Hide java version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global)
# If set to false, hide java version if it's the same as global:
# $(jenv version-name) == $(jenv global).
typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide java version if it's equal to "system".
typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############
# Perl color.
typeset -g POWERLEVEL9K_PLENV_FOREGROUND=0
typeset -g POWERLEVEL9K_PLENV_BACKGROUND=4
# Hide perl version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global)
# If set to false, hide perl version if it's the same as global:
# $(plenv version-name) == $(plenv global).
typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide perl version if it's equal to "system".
typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ perlbrew: perl version from perlbrew (https://github.com/gugod/App-perlbrew) ]############
# Perlbrew color.
typeset -g POWERLEVEL9K_PERLBREW_FOREGROUND=67
# Show perlbrew version only when in a perl project subdirectory.
typeset -g POWERLEVEL9K_PERLBREW_PROJECT_ONLY=true
# Don't show "perl-" at the front.
typeset -g POWERLEVEL9K_PERLBREW_SHOW_PREFIX=false
# Custom icon.
# typeset -g POWERLEVEL9K_PERLBREW_VISUAL_IDENTIFIER_EXPANSION='⭐'
############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############
# PHP color.
typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=0
typeset -g POWERLEVEL9K_PHPENV_BACKGROUND=5
# Hide php version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global)
# If set to false, hide php version if it's the same as global:
# $(phpenv version-name) == $(phpenv global).
typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide PHP version if it's equal to "system".
typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
#######[ scalaenv: scala version from scalaenv (https://github.com/scalaenv/scalaenv) ]#######
# Scala color.
typeset -g POWERLEVEL9K_SCALAENV_FOREGROUND=0
typeset -g POWERLEVEL9K_SCALAENV_BACKGROUND=1
# Hide scala version if it doesn't come from one of these sources.
typeset -g POWERLEVEL9K_SCALAENV_SOURCES=(shell local global)
# If set to false, hide scala version if it's the same as global:
# $(scalaenv version-name) == $(scalaenv global).
typeset -g POWERLEVEL9K_SCALAENV_PROMPT_ALWAYS_SHOW=false
# If set to false, hide scala version if it's equal to "system".
typeset -g POWERLEVEL9K_SCALAENV_SHOW_SYSTEM=true
# Custom icon.
# typeset -g POWERLEVEL9K_SCALAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]###########
# Haskell color.
typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=0
typeset -g POWERLEVEL9K_HASKELL_STACK_BACKGROUND=3
# Hide haskell version if it doesn't come from one of these sources.
#
# shell: version is set by STACK_YAML
# local: version is set by stack.yaml up the directory tree
# global: version is set by the implicit global project (~/.stack/global-project/stack.yaml)
typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local)
# If set to false, hide haskell version if it's the same as in the implicit global project.
typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true
# Custom icon.
# typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐'
################[ terraform: terraform workspace (https://www.terraform.io) ]#################
# Don't show terraform workspace if it's literally "default".
typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false
# POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element
# in each pair defines a pattern against which the current terraform workspace gets matched.
# More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
# that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters,
# you'll see this value in your prompt. The second element of each pair in
# POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The
# first match wins.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
# '*prod*' PROD
# '*test*' TEST
# '*' OTHER)
#
# If your current terraform workspace is "project_test", its class is TEST because "project_test"
# doesn't match the pattern '*prod*' but does match '*test*'.
#
# You can define different colors, icons and content expansions for different classes:
#
# typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=2
# typeset -g POWERLEVEL9K_TERRAFORM_TEST_BACKGROUND=0
# typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
# '*prod*' PROD # These values are examples that are unlikely
# '*test*' TEST # to match your needs. Customize them as needed.
'*' OTHER)
typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=4
typeset -g POWERLEVEL9K_TERRAFORM_OTHER_BACKGROUND=0
# typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
#############[ terraform_version: terraform version (https://www.terraform.io) ]##############
# Terraform version color.
typeset -g POWERLEVEL9K_TERRAFORM_VERSION_FOREGROUND=4
typeset -g POWERLEVEL9K_TERRAFORM_VERSION_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_TERRAFORM_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
################[ terraform_version: It shows active terraform version (https://www.terraform.io) ]#################
typeset -g POWERLEVEL9K_TERRAFORM_VERSION_SHOW_ON_COMMAND='terraform|tf'
#############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]#############
# Show kubecontext only when the command you are typing invokes one of these tools.
# Tip: Remove the next line to always show kubecontext.
typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|flux|fluxctl|stern|kubeseal|skaffold|kubent|kubecolor|cmctl|sparkctl'
# Kubernetes context classes for the purpose of using different colors, icons and expansions with
# different contexts.
#
# POWERLEVEL9K_KUBECONTEXT_CLASSES is an array with even number of elements. The first element
# in each pair defines a pattern against which the current kubernetes context gets matched.
# More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
# that gets matched. If you unset all POWERLEVEL9K_KUBECONTEXT_*CONTENT_EXPANSION parameters,
# you'll see this value in your prompt. The second element of each pair in
# POWERLEVEL9K_KUBECONTEXT_CLASSES defines the context class. Patterns are tried in order. The
# first match wins.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
# '*prod*' PROD
# '*test*' TEST
# '*' DEFAULT)
#
# If your current kubernetes context is "deathray-testing/default", its class is TEST
# because "deathray-testing/default" doesn't match the pattern '*prod*' but does match '*test*'.
#
# You can define different colors, icons and content expansions for different classes:
#
# typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=0
# typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_BACKGROUND=2
# typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
# '*prod*' PROD # These values are examples that are unlikely
# '*test*' TEST # to match your needs. Customize them as needed.
'*' DEFAULT)
typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=7
typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_BACKGROUND=5
# typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
# segment. Parameter expansions are very flexible and fast, too. See reference:
# http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
#
# Within the expansion the following parameters are always available:
#
# - P9K_CONTENT The content that would've been displayed if there was no content
# expansion defined.
# - P9K_KUBECONTEXT_NAME The current context's name. Corresponds to column NAME in the
# output of `kubectl config get-contexts`.
# - P9K_KUBECONTEXT_CLUSTER The current context's cluster. Corresponds to column CLUSTER in the
# output of `kubectl config get-contexts`.
# - P9K_KUBECONTEXT_NAMESPACE The current context's namespace. Corresponds to column NAMESPACE
# in the output of `kubectl config get-contexts`. If there is no
# namespace, the parameter is set to "default".
# - P9K_KUBECONTEXT_USER The current context's user. Corresponds to column AUTHINFO in the
# output of `kubectl config get-contexts`.
#
# If the context points to Google Kubernetes Engine (GKE) or Elastic Kubernetes Service (EKS),
# the following extra parameters are available:
#
# - P9K_KUBECONTEXT_CLOUD_NAME Either "gke" or "eks".
# - P9K_KUBECONTEXT_CLOUD_ACCOUNT Account/project ID.
# - P9K_KUBECONTEXT_CLOUD_ZONE Availability zone.
# - P9K_KUBECONTEXT_CLOUD_CLUSTER Cluster.
#
# P9K_KUBECONTEXT_CLOUD_* parameters are derived from P9K_KUBECONTEXT_CLUSTER. For example,
# if P9K_KUBECONTEXT_CLUSTER is "gke_my-account_us-east1-a_my-cluster-01":
#
# - P9K_KUBECONTEXT_CLOUD_NAME=gke
# - P9K_KUBECONTEXT_CLOUD_ACCOUNT=my-account
# - P9K_KUBECONTEXT_CLOUD_ZONE=us-east1-a
# - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
#
# If P9K_KUBECONTEXT_CLUSTER is "arn:aws:eks:us-east-1:123456789012:cluster/my-cluster-01":
#
# - P9K_KUBECONTEXT_CLOUD_NAME=eks
# - P9K_KUBECONTEXT_CLOUD_ACCOUNT=123456789012
# - P9K_KUBECONTEXT_CLOUD_ZONE=us-east-1
# - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION=
# Show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back to P9K_KUBECONTEXT_NAME.
POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}'
# Append the current context's namespace if it's not "default".
POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}'
# Custom prefix.
# typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='at '
#[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]#
# Show aws only when the command you are typing invokes one of these tools.
# Tip: Remove the next line to always show aws.
typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|terraform|pulumi|terragrunt'
# POWERLEVEL9K_AWS_CLASSES is an array with even number of elements. The first element
# in each pair defines a pattern against which the current AWS profile gets matched.
# More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
# that gets matched. If you unset all POWERLEVEL9K_AWS_*CONTENT_EXPANSION parameters,
# you'll see this value in your prompt. The second element of each pair in
# POWERLEVEL9K_AWS_CLASSES defines the profile class. Patterns are tried in order. The
# first match wins.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_AWS_CLASSES=(
# '*prod*' PROD
# '*test*' TEST
# '*' DEFAULT)
#
# If your current AWS profile is "company_test", its class is TEST
# because "company_test" doesn't match the pattern '*prod*' but does match '*test*'.
#
# You can define different colors, icons and content expansions for different classes:
#
# typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=28
# typeset -g POWERLEVEL9K_AWS_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_AWS_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
typeset -g POWERLEVEL9K_AWS_CLASSES=(
# '*prod*' PROD # These values are examples that are unlikely
# '*test*' TEST # to match your needs. Customize them as needed.
'*' DEFAULT)
typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=7
typeset -g POWERLEVEL9K_AWS_DEFAULT_BACKGROUND=1
# typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
# AWS segment format. The following parameters are available within the expansion.
#
# - P9K_AWS_PROFILE The name of the current AWS profile.
# - P9K_AWS_REGION The region associated with the current AWS profile.
typeset -g POWERLEVEL9K_AWS_CONTENT_EXPANSION='${P9K_AWS_PROFILE//\%/%%}${P9K_AWS_REGION:+ ${P9K_AWS_REGION//\%/%%}}'
#[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]#
# AWS Elastic Beanstalk environment color.
typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=2
typeset -g POWERLEVEL9K_AWS_EB_ENV_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
# Show azure only when the command you are typing invokes one of these tools.
# Tip: Remove the next line to always show azure.
typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi|terragrunt'
# POWERLEVEL9K_AZURE_CLASSES is an array with even number of elements. The first element
# in each pair defines a pattern against which the current azure account name gets matched.
# More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
# that gets matched. If you unset all POWERLEVEL9K_AZURE_*CONTENT_EXPANSION parameters,
# you'll see this value in your prompt. The second element of each pair in
# POWERLEVEL9K_AZURE_CLASSES defines the account class. Patterns are tried in order. The
# first match wins.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_AZURE_CLASSES=(
# '*prod*' PROD
# '*test*' TEST
# '*' OTHER)
#
# If your current azure account is "company_test", its class is TEST because "company_test"
# doesn't match the pattern '*prod*' but does match '*test*'.
#
# You can define different colors, icons and content expansions for different classes:
#
# typeset -g POWERLEVEL9K_AZURE_TEST_FOREGROUND=2
# typeset -g POWERLEVEL9K_AZURE_TEST_BACKGROUND=0
# typeset -g POWERLEVEL9K_AZURE_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_AZURE_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
typeset -g POWERLEVEL9K_AZURE_CLASSES=(
# '*prod*' PROD # These values are examples that are unlikely
# '*test*' TEST # to match your needs. Customize them as needed.
'*' OTHER)
# Azure account name color.
typeset -g POWERLEVEL9K_AZURE_OTHER_FOREGROUND=7
typeset -g POWERLEVEL9K_AZURE_OTHER_BACKGROUND=4
# Custom icon.
# typeset -g POWERLEVEL9K_AZURE_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]###########
# Show gcloud only when the command you are typing invokes one of these tools.
# Tip: Remove the next line to always show gcloud.
typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs|gsutil'
# Google cloud color.
typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=7
typeset -g POWERLEVEL9K_GCLOUD_BACKGROUND=4
# Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION and/or
# POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION if the default is too verbose or not informative
# enough. You can use the following parameters in the expansions. Each of them corresponds to the
# output of `gcloud` tool.
#
# Parameter | Source
# -------------------------|--------------------------------------------------------------------
# P9K_GCLOUD_CONFIGURATION | gcloud config configurations list --format='value(name)'
# P9K_GCLOUD_ACCOUNT | gcloud config get-value account
# P9K_GCLOUD_PROJECT_ID | gcloud config get-value project
# P9K_GCLOUD_PROJECT_NAME | gcloud projects describe $P9K_GCLOUD_PROJECT_ID --format='value(name)'
#
# Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced with '%%'.
#
# Obtaining project name requires sending a request to Google servers. This can take a long time
# and even fail. When project name is unknown, P9K_GCLOUD_PROJECT_NAME is not set and gcloud
# prompt segment is in state PARTIAL. When project name gets known, P9K_GCLOUD_PROJECT_NAME gets
# set and gcloud prompt segment transitions to state COMPLETE.
#
# You can customize the format, icon and colors of gcloud segment separately for states PARTIAL
# and COMPLETE. You can also hide gcloud in state PARTIAL by setting
# POWERLEVEL9K_GCLOUD_PARTIAL_VISUAL_IDENTIFIER_EXPANSION and
# POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION to empty.
typeset -g POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_ID//\%/%%}'
typeset -g POWERLEVEL9K_GCLOUD_COMPLETE_CONTENT_EXPANSION='${P9K_GCLOUD_PROJECT_NAME//\%/%%}'
# Send a request to Google (by means of `gcloud projects describe ...`) to obtain project name
# this often. Negative value disables periodic polling. In this mode project name is retrieved
# only when the current configuration, account or project id changes.
typeset -g POWERLEVEL9K_GCLOUD_REFRESH_PROJECT_NAME_SECONDS=60
# Custom icon.
# typeset -g POWERLEVEL9K_GCLOUD_VISUAL_IDENTIFIER_EXPANSION='⭐'
#[ google_app_cred: google application credentials (https://cloud.google.com/docs/authentication/production) ]#
# Show google_app_cred only when the command you are typing invokes one of these tools.
# Tip: Remove the next line to always show google_app_cred.
typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi|terragrunt'
# Google application credentials classes for the purpose of using different colors, icons and
# expansions with different credentials.
#
# POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES is an array with even number of elements. The first
# element in each pair defines a pattern against which the current kubernetes context gets
# matched. More specifically, it's P9K_CONTENT prior to the application of context expansion
# (see below) that gets matched. If you unset all POWERLEVEL9K_GOOGLE_APP_CRED_*CONTENT_EXPANSION
# parameters, you'll see this value in your prompt. The second element of each pair in
# POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES defines the context class. Patterns are tried in order.
# The first match wins.
#
# For example, given these settings:
#
# typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=(
# '*:*prod*:*' PROD
# '*:*test*:*' TEST
# '*' DEFAULT)
#
# If your current Google application credentials is "service_account deathray-testing x@y.com",
# its class is TEST because it doesn't match the pattern '* *prod* *' but does match '* *test* *'.
#
# You can define different colors, icons and content expansions for different classes:
#
# typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_FOREGROUND=28
# typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
# typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_TEST_CONTENT_EXPANSION='$P9K_GOOGLE_APP_CRED_PROJECT_ID'
typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_CLASSES=(
# '*:*prod*:*' PROD # These values are examples that are unlikely
# '*:*test*:*' TEST # to match your needs. Customize them as needed.
'*' DEFAULT)
typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_FOREGROUND=7
typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_BACKGROUND=4
# typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Use POWERLEVEL9K_GOOGLE_APP_CRED_CONTENT_EXPANSION to specify the content displayed by
# google_app_cred segment. Parameter expansions are very flexible and fast, too. See reference:
# http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
#
# You can use the following parameters in the expansion. Each of them corresponds to one of the
# fields in the JSON file pointed to by GOOGLE_APPLICATION_CREDENTIALS.
#
# Parameter | JSON key file field
# ---------------------------------+---------------
# P9K_GOOGLE_APP_CRED_TYPE | type
# P9K_GOOGLE_APP_CRED_PROJECT_ID | project_id
# P9K_GOOGLE_APP_CRED_CLIENT_EMAIL | client_email
#
# Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced by '%%'.
typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_CONTENT_EXPANSION='${P9K_GOOGLE_APP_CRED_PROJECT_ID//\%/%%}'
##############[ toolbox: toolbox name (https://github.com/containers/toolbox) ]###############
# Toolbox color.
typeset -g POWERLEVEL9K_TOOLBOX_FOREGROUND=0
typeset -g POWERLEVEL9K_TOOLBOX_BACKGROUND=3
# Don't display the name of the toolbox if it matches fedora-toolbox-*.
typeset -g POWERLEVEL9K_TOOLBOX_CONTENT_EXPANSION='${P9K_TOOLBOX_NAME:#fedora-toolbox-*}'
# Custom icon.
# typeset -g POWERLEVEL9K_TOOLBOX_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Custom prefix.
# typeset -g POWERLEVEL9K_TOOLBOX_PREFIX='in '
###############################[ public_ip: public IP address ]###############################
# Public IP color.
typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=7
typeset -g POWERLEVEL9K_PUBLIC_IP_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
########################[ vpn_ip: virtual private network indicator ]#########################
# VPN IP color.
typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=0
typeset -g POWERLEVEL9K_VPN_IP_BACKGROUND=6
# When on VPN, show just an icon without the IP address.
# Tip: To display the private IP address when on VPN, remove the next line.
typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION=
# Regular expression for the VPN network interface. Run `ifconfig` or `ip -4 a show` while on VPN
# to see the name of the interface.
typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(gpd|wg|(.*tun)|tailscale)[0-9]*|(zt.*)'
# If set to true, show one segment per matching network interface. If set to false, show only
# one segment corresponding to the first matching network interface.
# Tip: If you set it to true, you'll probably want to unset POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION.
typeset -g POWERLEVEL9K_VPN_IP_SHOW_ALL=false
# Custom icon.
# typeset -g POWERLEVEL9K_VPN_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
###########[ ip: ip address and bandwidth usage for a specified network interface ]###########
# IP color.
typeset -g POWERLEVEL9K_IP_BACKGROUND=4
typeset -g POWERLEVEL9K_IP_FOREGROUND=0
# The following parameters are accessible within the expansion:
#
# Parameter | Meaning
# ----------------------+-------------------------------------------
# P9K_IP_IP | IP address
# P9K_IP_INTERFACE | network interface
# P9K_IP_RX_BYTES | total number of bytes received
# P9K_IP_TX_BYTES | total number of bytes sent
# P9K_IP_RX_BYTES_DELTA | number of bytes received since last prompt
# P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
# P9K_IP_RX_RATE | receive rate (since last prompt)
# P9K_IP_TX_RATE | send rate (since last prompt)
typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+⇣$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+⇡$P9K_IP_TX_RATE }$P9K_IP_IP'
# Show information for the first network interface whose name matches this regular expression.
# Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
# Custom icon.
# typeset -g POWERLEVEL9K_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
#########################[ proxy: system-wide http/https/ftp proxy ]##########################
# Proxy color.
typeset -g POWERLEVEL9K_PROXY_FOREGROUND=4
typeset -g POWERLEVEL9K_PROXY_BACKGROUND=0
# Custom icon.
# typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐'
################################[ battery: internal battery ]#################################
# Show battery in red when it's below this level and not connected to power supply.
typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20
typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=1
# Show battery in green when it's charging or fully charged.
typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=2
# Show battery in yellow when it's discharging.
typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=3
# Battery pictograms going from low to high level of charge.
typeset -g POWERLEVEL9K_BATTERY_STAGES='\uf58d\uf579\uf57a\uf57b\uf57c\uf57d\uf57e\uf57f\uf580\uf581\uf578'
# Don't show the remaining time to charge/discharge.
typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
typeset -g POWERLEVEL9K_BATTERY_BACKGROUND=0
#####################################[ wifi: wifi speed ]#####################################
# WiFi color.
typeset -g POWERLEVEL9K_WIFI_FOREGROUND=0
typeset -g POWERLEVEL9K_WIFI_BACKGROUND=4
# Custom icon.
# typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Use different colors and icons depending on signal strength ($P9K_WIFI_BARS).
#
# # Wifi colors and icons for different signal strength levels (low to high).
# typeset -g my_wifi_fg=(0 0 0 0 0) # <-- change these values
# typeset -g my_wifi_icon=('WiFi' 'WiFi' 'WiFi' 'WiFi' 'WiFi') # <-- change these values
#
# typeset -g POWERLEVEL9K_WIFI_CONTENT_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}$P9K_WIFI_LAST_TX_RATE Mbps'
# typeset -g POWERLEVEL9K_WIFI_VISUAL_IDENTIFIER_EXPANSION='%F{${my_wifi_fg[P9K_WIFI_BARS+1]}}${my_wifi_icon[P9K_WIFI_BARS+1]}'
#
# The following parameters are accessible within the expansions:
#
# Parameter | Meaning
# ----------------------+---------------
# P9K_WIFI_SSID | service set identifier, a.k.a. network name
# P9K_WIFI_LINK_AUTH | authentication protocol such as "wpa2-psk" or "none"; empty if unknown
# P9K_WIFI_LAST_TX_RATE | wireless transmit rate in megabits per second
# P9K_WIFI_RSSI | signal strength in dBm, from -120 to 0
# P9K_WIFI_NOISE | noise in dBm, from -120 to 0
# P9K_WIFI_BARS | signal strength in bars, from 0 to 4 (derived from P9K_WIFI_RSSI and P9K_WIFI_NOISE)
####################################[ time: current time ]####################################
# Current time color.
typeset -g POWERLEVEL9K_TIME_FOREGROUND=0
typeset -g POWERLEVEL9K_TIME_BACKGROUND=7
# Format for the current time: 09:51:02. See `man 3 strftime`.
typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
# If set to true, time will update when you hit enter. This way prompts for the past
# commands will contain the start times of their commands as opposed to the default
# behavior where they contain the end times of their preceding commands.
typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
# Custom icon.
# typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Custom prefix.
# typeset -g POWERLEVEL9K_TIME_PREFIX='at '
# Example of a user-defined prompt segment. Function prompt_example will be called on every
# prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
# POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and yellow text on red background
# greeting the user.
#
# Type `p10k help segment` for documentation and a more sophisticated example.
function prompt_example() {
p10k segment -b 1 -f 3 -i '⭐' -t 'hello, %n'
}
# User-defined prompt segments may optionally provide an instant_prompt_* function. Its job
# is to generate the prompt segment for display in instant prompt. See
# https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
#
# Powerlevel10k will call instant_prompt_* at the same time as the regular prompt_* function
# and will record all `p10k segment` calls it makes. When displaying instant prompt, Powerlevel10k
# will replay these calls without actually calling instant_prompt_*. It is imperative that
# instant_prompt_* always makes the same `p10k segment` calls regardless of environment. If this
# rule is not observed, the content of instant prompt will be incorrect.
#
# Usually, you should either not define instant_prompt_* or simply call prompt_* from it. If
# instant_prompt_* is not defined for a segment, the segment won't be shown in instant prompt.
function instant_prompt_example() {
# Since prompt_example always makes the same `p10k segment` calls, we can call it from
# instant_prompt_example. This will give us the same `example` prompt segment in the instant
# and regular prompts.
prompt_example
}
# User-defined prompt segments can be customized the same way as built-in segments.
typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=3
typeset -g POWERLEVEL9K_EXAMPLE_BACKGROUND=1
# typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
# Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
# when accepting a command line. Supported values:
#
# - off: Don't change prompt when accepting a command line.
# - always: Trim down prompt when accepting a command line.
# - same-dir: Trim down prompt when accepting a command line unless this is the first command
# typed after changing current working directory.
typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=off
# Instant prompt mode.
#
# - off: Disable instant prompt. Choose this if you've tried instant prompt and found
# it incompatible with your zsh configuration files.
# - quiet: Enable instant prompt and don't print warnings when detecting console output
# during zsh initialization. Choose this if you've read and understood
# https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
# - verbose: Enable instant prompt and print a warning when detecting console output during
# zsh initialization. Choose this if you've never tried instant prompt, haven't
# seen the warning, or if you are unsure what this all means.
typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
# Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
# For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
# can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
# really need it.
typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
# If p10k is already loaded, reload configuration.
# This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
(( ! $+functions[p10k] )) || p10k reload
}
# Tell `p10k configure` which file it should overwrite.
typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
'builtin' 'unset' 'p10k_config_opts'A.9 壁纸自启与会话文件
.fehbg（2 行）
bash
#!/bin/sh
feh --no-fehbg --bg-fill '/home/sirius/图片/壁纸/浏览器/20230827170427.jpg' A.9b
.dmrc（2 行）
ini
[Desktop]
Session=xfce