序
本文主要研究一下jedis的borrow行为
borrowObject
org/apache/commons/pool2/impl/GenericObjectPool.java
scss
public T borrowObject(final Duration borrowMaxWaitDuration) throws Exception {
assertOpen();
final AbandonedConfig ac = this.abandonedConfig;
if (ac != null && ac.getRemoveAbandonedOnBorrow() && (getNumIdle() < 2) &&
(getNumActive() > getMaxTotal() - 3)) {
removeAbandoned(ac);
}
PooledObject<T> p = null;
// Get local copy of current config so it is consistent for entire
// method execution
final boolean blockWhenExhausted = getBlockWhenExhausted();
boolean create;
final long waitTimeMillis = System.currentTimeMillis();
while (p == null) {
create = false;
p = idleObjects.pollFirst();
if (p == null) {
p = create();
if (p != null) {
create = true;
}
}
if (blockWhenExhausted) {
if (p == null) {
if (borrowMaxWaitDuration.isNegative()) {
p = idleObjects.takeFirst();
} else {
p = idleObjects.pollFirst(borrowMaxWaitDuration);
}
}
if (p == null) {
throw new NoSuchElementException(appendStats(
"Timeout waiting for idle object, borrowMaxWaitDuration=" + borrowMaxWaitDuration));
}
} else if (p == null) {
throw new NoSuchElementException(appendStats("Pool exhausted"));
}
if (!p.allocate()) {
p = null;
}
if (p != null) {
try {
factory.activateObject(p);
} catch (final Exception e) {
try {
destroy(p, DestroyMode.NORMAL);
} catch (final Exception e1) {
// Ignore - activation failure is more important
}
p = null;
if (create) {
final NoSuchElementException nsee = new NoSuchElementException(
appendStats("Unable to activate object"));
nsee.initCause(e);
throw nsee;
}
}
if (p != null && getTestOnBorrow()) {
boolean validate = false;
Throwable validationThrowable = null;
try {
validate = factory.validateObject(p);
} catch (final Throwable t) {
PoolUtils.checkRethrow(t);
validationThrowable = t;
}
if (!validate) {
try {
destroy(p, DestroyMode.NORMAL);
destroyedByBorrowValidationCount.incrementAndGet();
} catch (final Exception e) {
// Ignore - validation failure is more important
}
p = null;
if (create) {
final NoSuchElementException nsee = new NoSuchElementException(
appendStats("Unable to validate object"));
nsee.initCause(validationThrowable);
throw nsee;
}
}
}
}
}
updateStatsBorrow(p, Duration.ofMillis(System.currentTimeMillis() - waitTimeMillis));
return p.getObject();
}- borrowObject方法会开启一个while循环，条件是p为null，也就是要获取到p或者是内部自己跳出循环；idleObjects.pollFirst()从连接池获取，如果为null则执行create，之后是blockWhenExhausted的判断逻辑，如果create出来的为null，则阻塞等待takeFirst或者pollFirst(borrowMaxWaitDuration)，如果还是null则抛出NoSuchElementException；如果blockWhenExhausted为false但是create为null则抛出
Pool exhausted - 如果不是null，则再次确认下object的状态，如果变更状态(
PooledObjectState.IDLE-->PooledObjectState.ALLOCATED)不成功则返回null；接着执行factory.activateObject(p)方法，如果出现异常则destory掉(jedis这里只是在db不一样的时候会重新select，默认可以理解为空操作)，紧接着是testOnBorrow的逻辑 - 这里就是如果idleObjects.pollFirst()为null会触发create，如果还是null则直接抛出NoSuchElementException异常，跳出循环；只有在不为null且allocate失败的时候会重置为null继续循环；另外如果是create出来的但是activate不成功也会抛出NoSuchElementException异常，跳出循环
create
java
/**
* Attempts to create a new wrapped pooled object.
* <p>
* If there are {@link #getMaxTotal()} objects already in circulation
* or in process of being created, this method returns null.
* </p>
*
* @return The new wrapped pooled object
*
* @throws Exception if the object factory's {@code makeObject} fails
*/
private PooledObject<T> create() throws Exception {
int localMaxTotal = getMaxTotal();
// This simplifies the code later in this method
if (localMaxTotal < 0) {
localMaxTotal = Integer.MAX_VALUE;
}
final long localStartTimeMillis = System.currentTimeMillis();
final long localMaxWaitTimeMillis = Math.max(getMaxWaitDuration().toMillis(), 0);
// Flag that indicates if create should:
// - TRUE: call the factory to create an object
// - FALSE: return null
// - null: loop and re-test the condition that determines whether to
// call the factory
Boolean create = null;
while (create == null) {
synchronized (makeObjectCountLock) {
final long newCreateCount = createCount.incrementAndGet();
if (newCreateCount > localMaxTotal) {
// The pool is currently at capacity or in the process of
// making enough new objects to take it to capacity.
createCount.decrementAndGet();
if (makeObjectCount == 0) {
// There are no makeObject() calls in progress so the
// pool is at capacity. Do not attempt to create a new
// object. Return and wait for an object to be returned
create = Boolean.FALSE;
} else {
// There are makeObject() calls in progress that might
// bring the pool to capacity. Those calls might also
// fail so wait until they complete and then re-test if
// the pool is at capacity or not.
makeObjectCountLock.wait(localMaxWaitTimeMillis);
}
} else {
// The pool is not at capacity. Create a new object.
makeObjectCount++;
create = Boolean.TRUE;
}
}
// Do not block more if maxWaitTimeMillis is set.
if (create == null &&
(localMaxWaitTimeMillis > 0 &&
System.currentTimeMillis() - localStartTimeMillis >= localMaxWaitTimeMillis)) {
create = Boolean.FALSE;
}
}
if (!create.booleanValue()) {
return null;
}
final PooledObject<T> p;
try {
p = factory.makeObject();
if (getTestOnCreate() && !factory.validateObject(p)) {
createCount.decrementAndGet();
return null;
}
} catch (final Throwable e) {
createCount.decrementAndGet();
throw e;
} finally {
synchronized (makeObjectCountLock) {
makeObjectCount--;
makeObjectCountLock.notifyAll();
}
}
final AbandonedConfig ac = this.abandonedConfig;
if (ac != null && ac.getLogAbandoned()) {
p.setLogAbandoned(true);
p.setRequireFullStackTrace(ac.getRequireFullStackTrace());
}
createdCount.incrementAndGet();
allObjects.put(new IdentityWrapper<>(p.getObject()), p);
return p;
}create方法不会判断createCount，如果超出则返回null，如果等待超出maxWait也会返回null；如果判断要创建则通过factory.makeObject()，另外针对testOnCreate且validateObject不通过的也返回null，如果是有异常则直接抛出
makeObject
redis/clients/jedis/JedisFactory.java
java
@Override
public PooledObject<Jedis> makeObject() throws Exception {
Jedis jedis = null;
try {
jedis = new Jedis(jedisSocketFactory, clientConfig);
jedis.connect();
return new DefaultPooledObject<>(jedis);
} catch (JedisException je) {
if (jedis != null) {
try {
jedis.quit();
} catch (RuntimeException e) {
logger.warn("Error while QUIT", e);
}
try {
jedis.close();
} catch (RuntimeException e) {
logger.warn("Error while close", e);
}
}
throw je;
}
}JedisFactory的makeObject会创建Jedis然后执行connect，如果有JedisException则抛出，这个也会直接跳出borrowObject的循环，直接给到调用方
activateObject
redis/clients/jedis/JedisFactory.java
java
public void activateObject(PooledObject<Jedis> pooledJedis) throws Exception {
final BinaryJedis jedis = pooledJedis.getObject();
if (jedis.getDB() != clientConfig.getDatabase()) {
jedis.select(clientConfig.getDatabase());
}
}JedisFactory的activateObject就是判断db跟配置的是不是一样，不一样则重新select
testOnBorrow
php
if (p != null && getTestOnBorrow()) {
boolean validate = false;
Throwable validationThrowable = null;
try {
validate = factory.validateObject(p);
} catch (final Throwable t) {
PoolUtils.checkRethrow(t);
validationThrowable = t;
}
if (!validate) {
try {
destroy(p, DestroyMode.NORMAL);
destroyedByBorrowValidationCount.incrementAndGet();
} catch (final Exception e) {
// Ignore - validation failure is more important
}
p = null;
if (create) {
final NoSuchElementException nsee = new NoSuchElementException(
appendStats("Unable to validate object"));
nsee.initCause(validationThrowable);
throw nsee;
}
}
}
public static void checkRethrow(final Throwable t) {
if (t instanceof ThreadDeath) {
throw (ThreadDeath) t;
}
if (t instanceof VirtualMachineError) {
throw (VirtualMachineError) t;
}
// All other instances of Throwable will be silently swallowed
}testOnBorrow的逻辑就是执行validateObject方法，如果是ThreadDeath或者VirtualMachineError才会重新抛出，否则吞掉，之后判断validate结果，如果不成功则执行destory方法，重新设置为null，但是如果这个是create出来的则抛出NoSuchElementException
小结
jedis的borrow行为是在while循环里头去获取的，一般是在allocate变更状态不成功(PooledObjectState.IDLE-->PooledObjectState.ALLOCATED)的时候会重新设置null，继续循环
- idleObjects.pollFirst()为null会触发create，如果还是null则抛出NoSuchElementException(
Pool exhausted)跳出循环；如果blockWhenExhausted为true，block之后获取到的还是null，也会抛出NoSuchElementException(Timeout waiting for idle object)跳出循环；如果触发create操作，且create抛出JedisException，这个也会直接跳出borrowObject的循环，直接给到调用方 - borrow出来不会null的执行activateObject，jedis这里只是在db不一样的时候会重新select，默认可以理解为空操作
- 最后是testOnBorrow的逻辑，如果有异常，则针对create出来的则抛出NoSuchElementException跳出循环，否则重置为null继续循环
总结一下就是如果是create有异常(
JedisException)则直接抛出，如果borrow不到(即使经过create)也会抛出NoSuchElementException(具体可能是Pool exhausted或者Timeout waiting for idle object)，如果有testOnBorrow不通过且是create出来的，也会抛出NoSuchElementException(Unable to validate object)