本文实现DMA快速显示文字
汉字点阵通常是16*16点阵，那么用DMA一次性显示汉字，应该至少申请480*16个字节的空间，用于显示一行文字，其中480是屏幕一行用DMA驱动所需内存。
一、 源码
HX8347.h
#ifndef USER_HX8347_H_
#define USER_HX8347_H_
#define SPI_hardware
#define SPI_hardware_dma
#define Buf_Size 480*16
#define X_MAX_PIXEL 240
#define Y_MAX_PIXEL 320
#define RED 0xf800
#define GREEN 0x07e0
#define BLUE 0x001f
#define WHITE 0xffff
#define BLACK 0x0000
#define YELLOW 0xFFE0
#define GRAY0 0xEF7D //灰色0 3165 00110 001011 00101
#define GRAY1 0x8410 //灰色1 00000 000000 00000
#define GRAY2 0x4208 //灰色2 1111111111011111
#ifdef SPI_hardware
#define LCD_CS GPIO_Pin_0 // CS:PA0
#define LCD_SDA GPIO_Pin_7 // SDA:PA7 SPI1 //硬件SPI实现，不用人工处理
#define LCD_SCL GPIO_Pin_5 // SCL:PA5 SPI1 //硬件SPI实现，不用人工处理
#define LCD_RST GPIO_Pin_4 // RST:PA4
#else
#define LCD_CS GPIO_Pin_0 // CS:PA0
#define LCD_SDA GPIO_Pin_1 // SDA:PA1
#define LCD_SCL GPIO_Pin_3 // SCL:PA3
#define LCD_RST GPIO_Pin_4 // RST:PA4
#endif
#define LCD_SCL_SET GPIO_WriteBit(GPIOA, LCD_SCL,Bit_SET)
#define LCD_SDA_SET GPIO_WriteBit(GPIOA, LCD_SDA,Bit_SET)
#define LCD_CS_SET GPIO_WriteBit(GPIOA, LCD_CS,Bit_SET)
#define LCD_RST_SET GPIO_WriteBit(GPIOA, LCD_RST,Bit_SET)
#define LCD_SCL_CLR GPIO_WriteBit(GPIOA, LCD_SCL,Bit_RESET)
#define LCD_SDA_CLR GPIO_WriteBit(GPIOA, LCD_SDA,Bit_RESET)
#define LCD_CS_CLR GPIO_WriteBit(GPIOA, LCD_CS,Bit_RESET)
#define LCD_RST_CLR GPIO_WriteBit(GPIOA, LCD_RST,Bit_RESET)
void LCD_GPIO_Init(void);
void Lcd_WriteIndex(unsigned char Index);
void Lcd_WriteData(unsigned char Data);
void LCD_WriteData_16Bit(unsigned int Data);
void Lcd_Write_REG(unsigned char Index,unsigned char Data);
void LCD_Init(void);
void Lcd_Clear(unsigned int Color);
void FillRect(u16 x1, u16 y1, u16 x2, u16 y2, u16 color);
void FillRect_DMA(u16 color);
void Gui_DrawFont_GBK16(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc, unsigned char *s);
void Gui_DrawFont_GBK16_DMA(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc,unsigned char *s);
#endif /* USER_HX8347_H_ */
HX8347.c
cpp
#include "debug.h"
#include "HX8347.h"
#include "font.h"
extern unsigned char TxData[];
extern void MYDMA_Enable(DMA_Channel_TypeDef*DMA_CHx);
void LCD_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure = {0};
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
#ifdef SPI_hardware
GPIO_InitStructure.GPIO_Pin = LCD_CS|LCD_RST;
#else
GPIO_InitStructure.GPIO_Pin = LCD_SCL|LCD_SDA|LCD_CS|LCD_RST;
#endif
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
//向SPI总线传输一个8位数据
void SPI_WriteData(unsigned char Data)
{
#ifdef SPI_hardware
SPI_I2S_SendData( SPI1, Data);
while( SPI_I2S_GetFlagStatus( SPI1, SPI_I2S_FLAG_TXE ) == RESET );
//Delay_Us(1);
uint32_t i;
SysTick->SR &= ~(1 << 0);
i = 8;
SysTick->CMP = i;
SysTick->CTLR |= (1 << 4);
SysTick->CTLR |= (1 << 5) | (1 << 0);
while((SysTick->SR & (1 << 0)) != (1 << 0))
;
SysTick->CTLR &= ~(1 << 0);
#else
unsigned char i=0;
for(i=8;i>0;i--)
{
if(Data&0x80)
LCD_SDA_SET; //输出数据
else LCD_SDA_CLR;
LCD_SCL_CLR;
LCD_SCL_SET;
Data<<=1;
}
#endif
}
//向液晶屏写一个8位指令
void Lcd_WriteIndex(unsigned char Index)
{
//SPI 写命令时序开始
LCD_CS_CLR;
SPI_WriteData(0x70);
SPI_WriteData(Index);
LCD_CS_SET;
}
//向液晶屏写一个8位数据
void Lcd_WriteData(unsigned char Data)
{
LCD_CS_CLR;
SPI_WriteData(0x72);
SPI_WriteData(Data);
LCD_CS_SET;
}
//向液晶屏写一个16位数据
void LCD_WriteData_16Bit(unsigned int Data)
{
LCD_CS_CLR;
SPI_WriteData(0x72);
SPI_WriteData(Data>>8);
SPI_WriteData(Data);
LCD_CS_SET;
}
void Lcd_Write_REG(unsigned char Index,unsigned char Data)
{
Lcd_WriteIndex(Index);
Lcd_WriteData(Data);
}
void Lcd_Reset(void)
{
LCD_RST_CLR;
Delay_Ms(50);
LCD_RST_SET;
Delay_Ms(50);
}
// set region to paint
void LCD_SetWindow(unsigned int x1,unsigned int y1,unsigned int x2,unsigned int y2)
{
//SC
Lcd_Write_REG(0x02,x1>>8); // Column address start2
Lcd_Write_REG(0x03,(u8)x1); // Column address start1
//EC
Lcd_Write_REG(0x04,x2>>8); // Column address end2
Lcd_Write_REG(0x05,(u8)x2); // Column address end1
//SP
Lcd_Write_REG(0x06,y1>>8); // Row address start2
Lcd_Write_REG(0x07,(u8)y1); // Row address start1
//EP
Lcd_Write_REG(0x08,y2>>8); // Row address end2
Lcd_Write_REG(0x09,(u8)y2); // Row address end1
//写0x22到index register，那么下次send data就会直接被写到graphic ram
Lcd_WriteIndex(0x22);
}
void FillRect(u16 x1, u16 y1, u16 x2, u16 y2, u16 color)
{
LCD_SetWindow(x1, y1,x2,y2);
x2 = x2 - x1 + 1;
y2 = y2 - y1 + 1;
LCD_CS_CLR;
SPI_WriteData(0x72);
for(x1 = x2; x1 != 0 ; x1--)
{
for (y1 = y2;y1 != 0 ;y1--)
{
SPI_WriteData(color>>8);
SPI_WriteData(color);
}
}
LCD_CS_SET;
}
void FillRect_DMA(u16 color)
{
int16_t j;
LCD_SetWindow(0, 0,239,319);
LCD_CS_CLR;
SPI_WriteData(0x72);
for(j=0 ;j<Buf_Size;){
TxData[j] = color>>8;
TxData[j+1] = color;
j += 2;
}
for(j = 0 ; j<320/(Buf_Size/480) ; j++){
SPI_I2S_DMACmd(SPI1,SPI_I2S_DMAReq_Tx,ENABLE);
MYDMA_Enable(DMA1_Channel3);
while(1){
if(DMA_GetFlagStatus(DMA1_FLAG_TC3)!=RESET)
{
DMA_ClearFlag(DMA1_FLAG_TC3);
break;
}
}
}
LCD_CS_SET;
}
void LCD_Init(void)
{
//LCD_GPIO_Init();
Lcd_Reset();
Lcd_Write_REG(0x18,0x88); //UADJ 75Hz
Lcd_Write_REG(0x19,0x01); //OSC_EN='1', start Osc
//Power Voltage Setting
Lcd_Write_REG(0x1B,0x1e); //VRH=4.60V 0x1e
Lcd_Write_REG(0x1C,0x04); //AP Crosstalk 04
Lcd_Write_REG(0x1A,0x01); //BT (VGH~15V,VGL~-10V,DDVDH~5V) 0x01
Lcd_Write_REG(0x24,0x21); //VMH 27 0x38
Lcd_Write_REG(0x25,0x5F); //VML
//VCOM offset
Lcd_Write_REG(0x23,0x8C); //for Flicker adjust
Lcd_Write_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0
Delay_Ms(50);
Lcd_Write_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0
Delay_Ms(50);
Lcd_Write_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0
Delay_Ms(50);
Lcd_Write_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0
Delay_Ms(50);
//Display ON Setting
Lcd_Write_REG(0x28,0x38); //GON=1, DTE=1, D=1000
Delay_Ms(50);
Lcd_Write_REG(0x28,0x3C); //GON=1, DTE=1, D=1100
Lcd_Write_REG(0x36,0x09); //REV, BGR
Lcd_Write_REG(0x17,0x05); //16BIT/PIXEL
//Gamma 2.2 Setting
Lcd_Write_REG(0x40,0x00); //
Lcd_Write_REG(0x41,0x00); //
Lcd_Write_REG(0x42,0x00); //
Lcd_Write_REG(0x43,0x11); //
Lcd_Write_REG(0x44,0x0e); //
Lcd_Write_REG(0x45,0x23); //
Lcd_Write_REG(0x46,0x08); //
Lcd_Write_REG(0x47,0x53); //
Lcd_Write_REG(0x48,0x03); //
Lcd_Write_REG(0x49,0x11); //
Lcd_Write_REG(0x4A,0x18); //
Lcd_Write_REG(0x4B,0x1a); //
Lcd_Write_REG(0x4C,0x16); //
Lcd_Write_REG(0x50,0x1c); //
Lcd_Write_REG(0x51,0x31); //
Lcd_Write_REG(0x52,0x2e); //
Lcd_Write_REG(0x53,0x3f); //
Lcd_Write_REG(0x54,0x3f); //
Lcd_Write_REG(0x55,0x3f); //
Lcd_Write_REG(0x56,0x2c); //
Lcd_Write_REG(0x57,0x77); //
Lcd_Write_REG(0x58,0x09); //
Lcd_Write_REG(0x59,0x05); //
Lcd_Write_REG(0x5A,0x07); //
Lcd_Write_REG(0x5B,0x0e); //
Lcd_Write_REG(0x5C,0x1c); //
Lcd_Write_REG(0x5D,0x88); //
Delay_Ms(100);
FillRect(0, 0, 239, 319, RED );
}
/*************************************************
函数名：LCD_DrawPoint
功能：画一个点
入口参数：无
返回值：无
*************************************************/
void Gui_DrawPoint(unsigned int x,unsigned int y,unsigned int Data)
{
LCD_SetWindow(x,y,x+1,y+1);
LCD_WriteData_16Bit(Data);
}
void Gui_DrawPoint_DMA(unsigned int x,unsigned int y,unsigned int Data)
{
//LCD_SetWindow(x,y,x+1,y+1);
//LCD_WriteData_16Bit(Data);
TxData[2*x+y*480]=Data>>8;
TxData[2*x+y*480+1]=Data;
}
void DMA_BUFFER_RESET(unsigned int bc)
{
unsigned int j;
for(j=0 ;j<Buf_Size;){
TxData[j] = bc>>8;
TxData[j+1] = bc;
j += 2;
}
}
void Gui_DrawFont_GBK16(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc,unsigned char *s)
{
unsigned char i,j;
unsigned short k,x0;
x0=x;
while(*s)
{
if((*s) < 128)
{
k=*s;
if (k==13)
{
x=x0;
y+=16;
}
else
{
if (k>32) k-=32; else k=0;
for(i=0;i<16;i++)
for(j=0;j<8;j++)
{
if(asc16[k*16+i]&(0x80>>j)) Gui_DrawPoint(x+j,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint(x+j,y+i,bc);
}
}
x+=8;
}
s++;
}
else
{
for (k=0;k<hz16_num;k++)
{
if ((hz16[k].Index[0]==*(s))&&(hz16[k].Index[1]==*(s+1)))
{
for(i=0;i<16;i++)
{
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2]&(0x80>>j)) Gui_DrawPoint(x+j,y+i,fc);
else {
if (fc!=bc) Gui_DrawPoint(x+j,y+i,bc);
}
}
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2+1]&(0x80>>j)) Gui_DrawPoint(x+j+8,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint(x+j+8,y+i,bc);
}
}
}
}
}
s+=2;x+=16;
}
}
}
void Gui_DrawFont_GBK16_DMA(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc,unsigned char *s)
{
unsigned char i,j;
unsigned short k,x0,y0;
x0=x;
y0=y;
x=0;
y=0;
DMA_BUFFER_RESET(bc); //清缓存
while(*s)
{
if((*s) < 128)
{
k=*s;
if (k==13)
{
x=x0;
y+=16;
}
else
{
if (k>32) k-=32; else k=0;
for(i=0;i<16;i++)
for(j=0;j<8;j++)
{
if(asc16[k*16+i]&(0x80>>j)) Gui_DrawPoint_DMA(x+j,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint_DMA(x+j,y+i,bc);
}
}
x+=8;
}
s++;
}
else
{
for (k=0;k<hz16_num;k++)
{
if ((hz16[k].Index[0]==*(s))&&(hz16[k].Index[1]==*(s+1)))
{
for(i=0;i<16;i++)
{
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2]&(0x80>>j)) Gui_DrawPoint_DMA(x+j,y+i,fc);
else {
if (fc!=bc) Gui_DrawPoint_DMA(x+j,y+i,bc);
}
}
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2+1]&(0x80>>j)) Gui_DrawPoint_DMA(x+j+8,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint_DMA(x+j+8,y+i,bc);
}
}
}
}
}
s+=2;x+=16;
}
}
LCD_SetWindow(0,y0,239,y0+16);
LCD_CS_CLR;
SPI_WriteData(0x72);
SPI_I2S_DMACmd(SPI1,SPI_I2S_DMAReq_Tx,ENABLE);
MYDMA_Enable(DMA1_Channel3);
while(1){
if(DMA_GetFlagStatus(DMA1_FLAG_TC3)!=RESET)
{
DMA_ClearFlag(DMA1_FLAG_TC3);
break;
}
}
LCD_CS_SET;
}main.c
cpp
/********************************** (C) COPYRIGHT *******************************
* File Name : main.c
* Author : WCH
* Version : V1.0.0
* Date : 2021/06/06
* Description : Main program body.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
/*
*@Note
GPIO routine:
PA0 push-pull output.
*/
#include "debug.h"
#include "HX8347.h"
/* Global define */
/* Global Variable */
unsigned char TxData[Buf_Size]={0};
u16 DMA1_MEM_LEN;
/*********************************************************************
* @fn GPIO_Toggle_INIT
*
* @brief Initializes GPIOA.0
*
* @return none
*/
void GPIO_Toggle_INIT(void)
{
GPIO_InitTypeDef GPIO_InitStructure = {0};
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
}
void SPI_1Lines_HalfDuplex_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure={0};
SPI_InitTypeDef SPI_InitStructure={0};
RCC_APB2PeriphClockCmd( RCC_APB2Periph_SPI1|RCC_APB2Periph_GPIOA, ENABLE );
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init( GPIOA, &GPIO_InitStructure );
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init( GPIOA, &GPIO_InitStructure );
SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Tx;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; //在空闲状态下，时钟线保持高电平
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; //数据在时钟的上升沿被传输。
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init( SPI1, &SPI_InitStructure );
SPI_Cmd( SPI1, ENABLE );
}
//使能dma1的通道3，因为spi输出对应的是此通道
void MYDMA_Enable(DMA_Channel_TypeDef*DMA_CHx)
{
DMA_Cmd(DMA_CHx, DISABLE );
DMA_SetCurrDataCounter(DMA1_Channel3,DMA1_MEM_LEN);
DMA_Cmd(DMA_CHx, ENABLE);
}
/*********************************************************************
* @fn DMA_Tx_Init
*
* @brief Initializes the DMAy Channelx configuration.
*
* @param DMA_CHx - x can be 1 to 7.
* ppadr - Peripheral base address.
* memadr - Memory base address.
* bufsize - DMA channel buffer size.
*
* @return none
*/
void DMA_Tx_Init( DMA_Channel_TypeDef* DMA_CHx, u32 ppadr, u32 memadr, u16 bufsize)
{
DMA_InitTypeDef DMA_InitStructure={0};
RCC_AHBPeriphClockCmd( RCC_AHBPeriph_DMA1, ENABLE );
DMA_DeInit(DMA_CHx);
DMA1_MEM_LEN=bufsize;
DMA_InitStructure.DMA_PeripheralBaseAddr = ppadr;
DMA_InitStructure.DMA_MemoryBaseAddr = memadr;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
DMA_InitStructure.DMA_BufferSize = bufsize;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_Medium;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init( DMA_CHx, &DMA_InitStructure );
}
/*********************************************************************
* @fn main
*
* @brief Main program.
*
* @return none
*/
int main(void)
{
u8 i = 0;
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
SystemCoreClockUpdate();
Delay_Init();
USART_Printf_Init(115200);
printf("SystemClk:%d\r\n", SystemCoreClock);
printf( "ChipID:%08x\r\n", DBGMCU_GetCHIPID() );
printf("GPIO Toggle TEST\r\n");
GPIO_Toggle_INIT();
LCD_GPIO_Init();
#ifdef SPI_hardware
printf("SPI_HARDWARE");
SPI_1Lines_HalfDuplex_Init();
#ifdef SPI_hardware_dma
printf("SPI_HARDWARE_DMA");
DMA_Tx_Init( DMA1_Channel3, (u32)&SPI1->DATAR, (u32)TxData, Buf_Size );
DMA_Cmd( DMA1_Channel3, ENABLE );
#endif
#else
printf("SPI_SOFTWARE");
#endif
LCD_Init();
GPIO_WriteBit(GPIOB, GPIO_Pin_13,Bit_RESET);
while(1)
{
Delay_Ms(1000);
FillRect_DMA(GREEN);
Gui_DrawFont_GBK16_DMA(0,5,BLACK,GREEN,"HELLO world");
Gui_DrawFont_GBK16_DMA(0,25,RED,GREEN,"LCD OK DISPLAY");
Gui_DrawFont_GBK16_DMA(0,45,RED,GREEN,"智能物联红外测温系统通过人数");
Gui_DrawFont_GBK16_DMA(0,65,RED,GREEN,"报警人数人体温度环境表面距离");
Gui_DrawFont_GBK16_DMA(0,85,RED,GREEN,"网络连接中.温度气象站雨量风速");
Gui_DrawFont_GBK16_DMA(0,105,RED,GREEN,"创新实验平台℃");
Delay_Ms(2000);
FillRect_DMA(RED);
Delay_Ms(1000);
FillRect_DMA(BLUE);
Gui_DrawFont_GBK16_DMA(0,5,WHITE,BLUE,"HELLO world");
Gui_DrawFont_GBK16_DMA(0,25,WHITE,BLUE,"LCD OK DISPLAY");
Gui_DrawFont_GBK16_DMA(0,45,WHITE,BLUE,"智能物联红外测温系统通过人数");
Gui_DrawFont_GBK16_DMA(0,65,WHITE,BLUE,"报警人数人体温度环境表面距离");
Gui_DrawFont_GBK16_DMA(0,85,WHITE,BLUE,"网络连接中.温度气象站雨量风速");
Gui_DrawFont_GBK16_DMA(0,105,WHITE,BLUE,"创新实验平台℃");
Delay_Ms(1000);
FillRect_DMA(YELLOW);
Delay_Ms(1000);
FillRect(0, 0, 239, 63, RED );
Gui_DrawFont_GBK16(15,5,BLACK,GRAY0,"HELLO world");
Gui_DrawFont_GBK16(15,25,RED,GRAY0,"LCD OK DISPLAY");
Gui_DrawFont_GBK16(15,45,RED,GRAY0,"智能物联红外测温系统通过人数");
Gui_DrawFont_GBK16(15,65,RED,GRAY0,"报警人数人体温度环境表面距离");
Gui_DrawFont_GBK16(15,85,RED,GRAY0,"网络连接中.温度气象站雨量风速");
Gui_DrawFont_GBK16(15,105,RED,GRAY0,"创新实验平台℃");
Delay_Ms(1000);
GPIO_WriteBit(GPIOB, GPIO_Pin_13, (i == 0) ? (i = Bit_SET) : (i = Bit_RESET));
printf( "GPIOB:%d\r\n", i);
FillRect(0, 0, 239, 319, RED );
Delay_Ms(1000);
FillRect(0, 0, 239, 319, GREEN );
Delay_Ms(1000);
FillRect(0, 0, 239, 319, BLUE );
FillRect(50, 50, 100, 100, RED );
}
}二、说明
1、增加了 Gui_DrawPoint_DMA(unsigned int x,unsigned int y,unsigned int Data)向DMA内存画点的功能
void Gui_DrawPoint_DMA(unsigned int x,unsigned int y,unsigned int Data)
{
TxData[2*x+y*480]=Data>>8;
TxData[2*x+y*480+1]=Data;
}
2、增加了void DMA_BUFFER_RESET(unsigned int bc)，用于清空DMA内存
void DMA_BUFFER_RESET(unsigned int bc)
{
unsigned int j;
for(j=0 ;j<Buf_Size;){
TxData[j] = bc>>8;
TxData[j+1] = bc;
j += 2;
}
}
3、增加了Gui_DrawFont_GBK16_DMA(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc,unsigned char *s)。用于处理字符串并以DMA方式输出到屏幕。
void Gui_DrawFont_GBK16_DMA(unsigned int x, unsigned int y, unsigned int fc, unsigned int bc,unsigned char *s)
{
unsigned char i,j;
unsigned short k,x0,y0;
x0=x;
y0=y;
x=0;
y=0;
DMA_BUFFER_RESET(bc); //清缓存
while(*s)
{
if((*s) < 128)
{
k=*s;
if (k==13)
{
x=x0;
y+=16;
}
else
{
if (k>32) k-=32; else k=0;
for(i=0;i<16;i++)
for(j=0;j<8;j++)
{
if(asc16[k*16+i]&(0x80>>j)) Gui_DrawPoint_DMA(x+j,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint_DMA(x+j,y+i,bc);
}
}
x+=8;
}
s++;
}
else
{
for (k=0;k<hz16_num;k++)
{
if ((hz16[k].Index[0]==*(s))&&(hz16[k].Index[1]==*(s+1)))
{
for(i=0;i<16;i++)
{
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2]&(0x80>>j)) Gui_DrawPoint_DMA(x+j,y+i,fc);
else {
if (fc!=bc) Gui_DrawPoint_DMA(x+j,y+i,bc);
}
}
for(j=0;j<8;j++)
{
if(hz16[k].Msk[i*2+1]&(0x80>>j)) Gui_DrawPoint_DMA(x+j+8,y+i,fc);
else
{
if (fc!=bc) Gui_DrawPoint_DMA(x+j+8,y+i,bc);
}
}
}
}
}
s+=2;x+=16;
}
}
LCD_SetWindow(0,y0,239,y0+16);
LCD_CS_CLR;
SPI_WriteData(0x72);
SPI_I2S_DMACmd(SPI1,SPI_I2S_DMAReq_Tx,ENABLE);
MYDMA_Enable(DMA1_Channel3);
while(1){
if(DMA_GetFlagStatus(DMA1_FLAG_TC3)!=RESET)
{
DMA_ClearFlag(DMA1_FLAG_TC3);
break;
}
}
LCD_CS_SET;
}
三、总结
1、申请的DMA空间为480*16，对应于屏幕是一个240*16的长条空间。也就是每次向屏幕刷一个 240*16范围，对应文字就是一行。改变起始位置，就可以在其他地方再刷一行。
DMA快速显示文字