基于vue3的Crontab组件

Vrapile2024-04-07 10:46

网上找的没有满意的，决定从若依前后端分离其前端vue2中的crontab进行转换，先上效果

若依：

改后：

v2转v3没什么难度，其中有大量的将 this.*** 替换为 ***.value，笔者写了个正则替换，希望可以帮助大家

复制代码 
this.(\w+)         $1.value

需要注意的有，在v2中【this.$refs[refName].cycle01 = indexArr[0]】这样写

在v3中要转换一下，在子组件中用【defineExpose】抛出一个setData方法，然后【proxy.$refs[refName].setData("cycle01", Number(indexArr[0]))】赋值

贴出核心Crontab.vue的代码，其子组件就不一一贴了，需要的可以自己下若依代码进行转换

复制代码 
<template>
  <div class="crontab">
    <el-tabs type="border-card">
      <el-tab-pane label="秒">
        <CrontabSecond
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronsecond"
        />
      </el-tab-pane>

      <el-tab-pane label="分钟">
        <CrontabMin
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronmin"
        />
      </el-tab-pane>

      <el-tab-pane label="小时">
        <CrontabHour
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronhour"
        />
      </el-tab-pane>

      <el-tab-pane label="日">
        <CrontabDay
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronday"
        />
      </el-tab-pane>

      <el-tab-pane label="月">
        <CrontabMonth
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronmonth"
        />
      </el-tab-pane>

      <el-tab-pane label="周">
        <CrontabWeek
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronweek"
        />
      </el-tab-pane>

      <el-tab-pane label="年">
        <CrontabYear
          @update="updateCrontabValue"
          v-model:check="checkNumber"
          v-model:cron="crontabValueObj"
          ref="cronyear"
        />
      </el-tab-pane>
    </el-tabs>

    <div class="crontab-main">
      <div class="crontab-main-table">
        <table>
          <thead>
            <th v-for="item of tabTitles" width="40" :key="item">{{item}}</th>
            <!-- <th>Cron 表达式</th> -->
          </thead>
          <tbody>
            <td>
              <span>{{crontabValueObj.second}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.min}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.hour}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.day}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.month}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.week}}</span>
            </td>
            <td>
              <span>{{crontabValueObj.year}}</span>
            </td>
            <!-- <td>
              <span>{{crontabValueString}}</span>
            </td> -->
          </tbody>
        </table>
        <table>
          <thead>
            <th>Cron 表达式</th>
          </thead>
          <tbody>
            <td>
              <span>{{crontabValueString}}</span>
            </td>
          </tbody>
        </table>
      </div>
      
      <div class="crontab-main-result">
        <CrontabResult v-model:ex="crontabValueString"></CrontabResult>
      </div>
    </div>

  </div>
</template>

<script setup name="Crontab">
import CrontabSecond from "./crontab/CrontabSecond.vue";
import CrontabMin from "./crontab/CrontabMin.vue";
import CrontabHour from "./crontab/CrontabHour.vue";
import CrontabDay from "./crontab/CrontabDay.vue";
import CrontabMonth from "./crontab/CrontabMonth.vue";
import CrontabWeek from "./crontab/CrontabWeek.vue";
import CrontabYear from "./crontab/CrontabYear.vue";
import CrontabResult from "./crontab/CrontabResult.vue";

const { proxy } = getCurrentInstance();

const emits = defineEmits(["hide", "fill"]);

const props = defineProps({
  expression: {type: String, default: ""}
})

const tabTitles = ref(["秒", "分钟", "小时", "日", "月", "周", "年"])
const tabActive = ref(0)
const crontabValueObj = ref({
  second: "*",
  min: "*",
  hour: "*",
  day: "*",
  month: "*",
  week: "?",
  year: "",
})

const crontabValueString = computed(() => {
  let obj = crontabValueObj.value;
  let str =
    obj.second +
    " " +
    obj.min +
    " " +
    obj.hour +
    " " +
    obj.day +
    " " +
    obj.month +
    " " +
    obj.week +
    (obj.year == "" ? "" : " " + obj.year);
  return str;
})

onMounted(() => {
  resolveExp();
})

watch(() => props.expression, (v) => {
  resolveExp();
});

function resolveExp() {
  // 反解析 表达式
  if (props.expression) {
    let arr = props.expression.split(" ");
    if (arr.length >= 6) {
      //6 位以上是合法表达式
      let obj = {
        second: arr[0],
        min: arr[1],
        hour: arr[2],
        day: arr[3],
        month: arr[4],
        week: arr[5],
        year: arr[6] ? arr[6] : "",
      };
      crontabValueObj.value = {
        ...obj,
      };
      for (let i in obj) {
        if (obj[i]) changeRadio(i, obj[i]);
      }
    }
  } else {
    // 没有传入的表达式 则还原
    clearCron();
  }
}
// tab切换值
function tabCheck(index) {
  tabActive.value = index;
}
// 由子组件触发，更改表达式组成的字段值
function updateCrontabValue(name, value, from) {
  // "updateCrontabValue", name, value, from;
  crontabValueObj.value[name] = value;
  if (from && from !== name) {
    console.log(`来自组件 ${from} 改变了 ${name} ${value}`);
    changeRadio(name, value);
  }
}
// 赋值到组件
function changeRadio(name, value) {
  let arr = ["second", "min", "hour", "month"]
  let refName = "cron" + name
  let insValue;

  if (!proxy.$refs[refName]) return;

  if (arr.includes(name)) {
    if (value === "*") {
      insValue = 1;
    } else if (value.indexOf("-") > -1) {
      let indexArr = value.split("-");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("cycle01", 0))
        : (proxy.$refs[refName].setData("cycle01", Number(indexArr[0])));
      proxy.$refs[refName].setData("cycle02", Number(indexArr[1]));
      insValue = 2;
    } else if (value.indexOf("/") > -1) {
      let indexArr = value.split("/");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("average01", 0))
        : (proxy.$refs[refName].setData("average01", Number(indexArr[0])));
      proxy.$refs[refName].setData("average02", Number(indexArr[1]));
      insValue = 3;
    } else {
      insValue = 4;
      let list = value.split(",");
      for(let item of list){
        item = String(item)
      }
      proxy.$refs[refName].setData("checkboxList", list);
    }
  } else if (name == "day") {
    if (value === "*") {
      insValue = 1;
    } else if (value == "?") {
      insValue = 2;
    } else if (value.indexOf("-") > -1) {
      let indexArr = value.split("-");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("cycle01", 0))
        : (proxy.$refs[refName].setData("cycle01", Number(indexArr[0])));
      proxy.$refs[refName].setData("cycle02", Number(indexArr[1]));
      insValue = 3;
    } else if (value.indexOf("/") > -1) {
      let indexArr = value.split("/");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("average01", 0))
        : (proxy.$refs[refName].setData("average01", Number(indexArr[0])));
      proxy.$refs[refName].setData("average02", Number(indexArr[1]));
      insValue = 4;
    } else if (value.indexOf("W") > -1) {
      let indexArr = value.split("W");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("workday", 0))
        : (proxy.$refs[refName].setData("workday", Number(indexArr[0])));
      insValue = 5;
    } else if (value === "L") {
      insValue = 6;
    } else {
      let list = value.split(",");
      for(let item of list){
        item = String(item)
      }
      proxy.$refs[refName].setData("checkboxList", list);
      insValue = 7;
    }
  } else if (name == "week") {
    if (value === "*") {
      insValue = 1;
    } else if (value == "?") {
      insValue = 2;
    } else if (value.indexOf("-") > -1) {
      let indexArr = value.split("-");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("cycle01", "0"))
        : (proxy.$refs[refName].setData("cycle01", String(indexArr[0])));
      proxy.$refs[refName].setData("cycle02", String(indexArr[1]));
      insValue = 3;
    } else if (value.indexOf("#") > -1) {
      let indexArr = value.split("#");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("average01", 1))
        : (proxy.$refs[refName].setData("average01", Number(indexArr[0])));
      proxy.$refs[refName].setData("average02", String(indexArr[1]));
      insValue = 4;
    } else if (value.indexOf("L") > -1) {
      let indexArr = value.split("L");
      isNaN(indexArr[0])
        ? (proxy.$refs[refName].setData("weekday", "1"))
        : (proxy.$refs[refName].setData("weekday", String(indexArr[0])));
      insValue = 5;
    } else {
      let list = value.split(",");
      for(let item of list){
        item = String(item)
      }
      proxy.$refs[refName].setData("checkboxList", list);
      insValue = 6;
    }
  } else if (name == "year") {
    if (value == "") {
      insValue = 1;
    } else if (value == "*") {
      insValue = 2;
    } else if (value.indexOf("-") > -1) {
      insValue = 3;
    } else if (value.indexOf("/") > -1) {
      insValue = 4;
    } else {
      let list = value.split(",");
      for(let item of list){
        item = String(item)
      }
      proxy.$refs[refName].setData("checkboxList", list);
      insValue = 5;
    }
  }
  proxy.$refs[refName].setData("radioValue",  insValue);
}
// 表单选项的子组件校验数字格式（通过-props传递）
function checkNumber(value, minLimit, maxLimit) {
  // 检查必须为整数
  value = Math.floor(Number(value));
  if (value < minLimit) {
    value = minLimit;
  } else if (value > maxLimit) {
    value = maxLimit;
  }
  return value;
}
// 隐藏弹窗
function hidePopup() {
  emits("hide");
}
// 填充表达式
function submitFill() {
  emits("fill", crontabValueString);
  hidePopup();
}
function clearCron() {
  // 还原选择项
  ("准备还原");
  crontabValueObj.value = {
    second: "*",
    min: "*",
    hour: "*",
    day: "*",
    month: "*",
    week: "?",
    year: "",
  };
  for (let j in crontabValueObj.value) {
    changeRadio(j, crontabValueObj.value[j]);
  }
}

defineExpose({
  submitFill, clearCron
})
</script>
<style scoped>
.crontab{
  flex: 1;
  height: 100%;
  display: flex;
  flex-direction: column;
}
.crontab-main {
  flex: 1;
  width: 100%;
  margin: 10px auto;
  background: #fff;
  border-radius: 5px;
  font-size: 12px;
  border: 1px solid #ccc;
  box-sizing: border-box;
  line-height: 24px;
  padding: 5px 10px 5px;
  display: flex;
  justify-content: space-between;
  overflow-y: auto;
}
.crontab-main-table {
  box-sizing: border-box;
  line-height: 24px;
  padding: 5px 10px 5px;
  width: 50%;
  display: flex;
  flex-direction: column;
  justify-content: space-around;
  table {
    text-align: center;
    width: 100%;
    margin: 0;
    span {
      display: block;
      width: 100%;
      font-family: arial;
      line-height: 30px;
      height: 30px;
      white-space: nowrap;
      overflow: hidden;
      border: 1px solid #e8e8e8;
    }
  }
}

.crontab-main-result {
  box-sizing: border-box;
  padding: 5px 10px 5px;
  background-color: #f1f1f1;
  background-size: cover;
  width: 48%;
  display: flex;
  flex-direction: column;
  .crontab-result-title{
    padding: 5px;
  }
  :deep(.crontab-result-scroll) {
    font-size: 12px;
    line-height: 24px;
    margin: 0 !important;
    padding-left: 80px;
  }
}

.crontab-footer {
  text-align: right;
  height: 25px;
  padding: 5px 20px;
}
</style>

将原来组件的按钮移到引用存，引用样例

复制代码 
　　<el-dialog title="Cron表达式生成器" v-model="formCrontabOpen" append-to-body destroy-on-close class="nine-tanchuang-001">
      <!-- <crontab @change="cronChange" v-model:value="formData.cronExpression" /> -->
      <Crontab ref="crontabRef" @hide="formCrontabOpen=false" @fill="crontabFill" v-model:expression="formData.cronExpression"></Crontab>
      <template #footer>
        <div class="dialog-footer">
          <el-button type="primary" @click="formCrontSubmit">确 定</el-button>
          <el-button type="warning" @click="formCrontReset">重 置</el-button>
          <el-button @click="formCrontabOpen=false">取 消</el-button>
        </div>
      </template>
    </el-dialog>
相关推荐
CherishTaoTao2 天前
Vue3 keep-alive核心源码的解析
前端·vue3
虞泽3 天前
鸢尾博客项目开源
java·spring boot·vue·vue3·博客
前端杂货铺4 天前
简记Vue3（三）—— ref、props、生命周期、hooks
vue.js·vue3
静谧的美5 天前
vue3-element-admin 去掉登录
vue.js·前端框架·vue3·去掉登录
朝阳395 天前
vue3【组件封装】确认对话框 Modal
vue3·组件封装
朝阳395 天前
vue3【组件封装】消息提示 Toast
vue3·消息提示·组件封装
占星安啦6 天前
【electron+vue3】使用JustAuth实现第三方登录（前后端完整版）
electron·vue3·登录·justauth·第三方登录
前端烨6 天前
element-plus版本过老，自写选项弹框增删功能
前端·javascript·css·vue3·element-plus
前端杂货铺6 天前
简记 Vue3（一）—— setup、ref、reactive、toRefs、toRef
vue·vue3·简记
热门推荐
01【HarmonyOS】HUAWEI DevEco Studio 下载地址汇总02(欧拉)openEuler系统添加网卡文件配置流程、(欧拉)openEuler系统手动配置ipv6地址流程、(欧拉)openEuler系统网络管理说明03组基轨迹建模 GBTM的介绍与实现（Stata 或 R）04【AIGC】重塑未来的科技巨轮05全面解析：构建基于深度学习的安全帽检测系统（UI界面+YOLO代码+数据集）06【经验分享】Ubuntu22.04安装微信(linux官方版)07基于YOLOv10深度学习的CT扫描图像肾结石智能检测系统【python源码+Pyqt5界面+数据集+训练代码】深度学习实战、目标检测08Ubuntu 20.04使用Livox mid 360 测试 FAST_LIO09RAG 实践- Ollama+RagFlow 部署本地知识库10【TC3xx芯片】TC3xx芯片电源管理系统PMS详解