SAP ABAP 程序迁移工具 SAPLINK ABAP GIT
1. saplink
这个工具功能挺强大的. 但是使用起来有点麻烦, 需要针对不同的开发对象导入不同的插件.才能处理特定的对象. 而且版本还在不断变化.
saplink 项目地址：https://github.com/sapmentors/SAPlink
saplink plugins 项目地址：https://github.com/sapmentors/SAPlink-plugins
project homepage: http://saplink.org |
discussion group: https://cw.sdn.sap.com/cw/groups/saplink?view=discussions
project wiki: https://wiki.sdn.sap.com/wiki/display/ABAP/SAPlink
2. abapGit
abapGit documentation - WelcomeabapGit documentation - Welcome编辑https://docs.abapgit.org/
3. 传输请求
SAP传输请求的工作原理:
开发时创建的所有开发对象都会强制写入一个传输请求号.(相关表E070/E071/E071K).需要传输到目标系统时,需要先用SE10去释放传输请求(释放的过程,就是开发对象的打包过程,所有的内容都会按特定格式写入文件包,放在服务器的特定目录下/usr/sap/trans/cofiles 和 /usr/sap/trans/data).后续的处理过程: STMS只是一个界面工具,它实现了如下过程:
-
把文件同步到目标系统的应用服务器中
-
把传输请求添加到导入队列中
-
执行传输请求的导入过程.把其中的所有开发对象写入目标系统
-
第一式,从服务器下载传输请求: 输入请求号,从系统的传输路径下载文件到PC指定目录
-
第二式,上传传输请求到应用服务器: 输入传输请求号,从PC指定目录读取文件,上传到应用服务器的特定目录 /usr/sap/trans/cofiles /usr/sap/trans/data
上传后,可以通过下面的功能检查结果.
第三式,检查传输请求文件在应用服务器: 检查传输请求文件在特定目录是否存在
- 第四式,执行传输请求的导入: 执行后,传输请求的内容将写入目标系统
同时,标准功能(TCODE: STMS中也能看到这个请求及处理的日志)
4. SAPLINK源代码
*|---------------------------------------------------------------------|
*| For a full list of contributors visit: | |
*| project homepage: http://saplink.org |
*| discussion group: |
*| https://cw.sdn.sap.com/cw/groups/saplink?view=discussions\|
*| project wiki: https://wiki.sdn.sap.com/wiki/display/ABAP/SAPlink\|
*\---------------------------------------------------------------------/
*/---------------------------------------------------------------------\
*| This file is part of SAPlink. |
*| |
*| Copyright 2014 SAPlink project members |
*| |
*| Licensed under the Apache License, Version 2.0 (the "License"); |
*| you may not use this file except in compliance with the License. |
*| You may obtain a copy of the License at |
*| |
*| http://www.apache.org/licenses/LICENSE-2.0 |
*| |
*| Unless required by applicable law or agreed to in writing, software |
*| distributed under the License is distributed on an "AS IS" BASIS, |
*| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or |
*| implied. |
*| See the License for the specific language governing permissions and |
*| limitations under the License. |
*\---------------------------------------------------------------------/ |
REPORT zsaplink.
class zsaplink DEFINITION load. " Convenience for older SAP-Releases
*/------------------------DATA----------------------------\
TABLES: sscrfields, e071, e07t.
TYPE-POOLS: icon, slis, sabc, stms, trwbo.
TYPES: BEGIN OF t_plugin,
object TYPE ko100-object,
text TYPE ko100-text,
END OF t_plugin.
TYPES: BEGIN OF t_objecttable,
classname TYPE string,
object TYPE ko100-object,
text TYPE ko100-text,
END OF t_objecttable.
TYPES: BEGIN OF t_nuggetobject,
objtype TYPE string,
objname TYPE string,
exists TYPE flag,
END OF t_nuggetobject.
*addition of package data
**** Read all objects of the package
TYPES: BEGIN OF t_objects_package,
select TYPE char1,
object TYPE tadir-object,
object_txt TYPE string,
obj_name TYPE tadir-obj_name,
srcsystem TYPE tadir-srcsystem,
down_flag TYPE char1,
status TYPE char1,
msg TYPE string,
END OF t_objects_package.
TYPES: BEGIN OF t_requestobject,
object TYPE e071-object,
obj_name TYPE e071-obj_name,
END OF t_requestobject.
TYPES: tt_requestobject TYPE TABLE OF t_requestobject.
TYPES: BEGIN OF gts_versions_delta,
classname TYPE classname,
version_ixml TYPE zsaplink=>gts_version_info,
version_sap TYPE zsaplink=>gts_version_info,
END OF gts_versions_delta.
DATA: objects_package TYPE TABLE OF t_objects_package,
packageline TYPE t_objects_package,
tabletypeline TYPE ko105,
tabletypesin TYPE TABLE OF ko105,
tabletypesout TYPE tr_object_texts,
tabletypeoutline TYPE ko100,
lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_fieldcat LIKE LINE OF lt_fieldcat,
ls_layout TYPE slis_layout_alv,
lv_count TYPE i,
lv_pers TYPE i,
*end of addition for packages
*addition of Transport
it_requestobject TYPE TABLE OF t_requestobject,
wa_requestobject TYPE t_requestobject,
*end of addition for transport
pluginline TYPE t_plugin,
pluginlist TYPE TABLE OF t_plugin,
hidid(3) TYPE c,
currenttab TYPE string,
isslinkee(1) TYPE c VALUE ' ',
objecttable TYPE TABLE OF t_objecttable,
objectline TYPE t_objecttable,
_objname TYPE string,
_objtype TYPE string,
nuggetname TYPE string,
targetobject TYPE REF TO zsaplink,
xml TYPE string,
excclass TYPE REF TO zcx_saplink,
errormsg TYPE string,
statusmsg TYPE string,
_pluginexists TYPE flag,
_objectexists TYPE flag,
_flag TYPE flag,
errorflag TYPE flag,
it_nuggetobject TYPE TABLE OF t_nuggetobject,
wa_nuggetobject TYPE t_nuggetobject,
deffilename TYPE string,
retfilename TYPE string,
retpath TYPE string,
retfullpath TYPE string,
retuseract TYPE i,
retfiletable TYPE filetable,
retrc TYPE sysubrc,
retuseraction TYPE i,
nugg TYPE REF TO zsaplink_nugget,
stemp TYPE string,
anxmldoc TYPE REF TO if_ixml_document,
ixmldocument TYPE REF TO if_ixml_document,
foo TYPE REF TO data,
len TYPE i,
l_marker TYPE i,
l_offset TYPE i,
l_total_offset TYPE i,
es_selected_request TYPE trwbo_request_header,
es_selected_task TYPE trwbo_request_header,
iv_organizer_type TYPE trwbo_calling_organizer,
is_selection TYPE trwbo_selection,
gt_versions_delta TYPE STANDARD TABLE OF gts_versions_delta WITH NON-UNIQUE DEFAULT KEY,
gv_version_line TYPE sytabix.
FIELD-SYMBOLS: <obj> LIKE LINE OF objects_package.
*\--------------------------------------------------------------------/
*/------------------------SELECTION SCREEN----------------------------\
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb FOR 20 LINES.
SELECTION-SCREEN TAB (17) text-tb2 USER-COMMAND nugg
DEFAULT SCREEN 120.
SELECTION-SCREEN TAB (17) text-tb1 USER-COMMAND obj
DEFAULT SCREEN 110.
SELECTION-SCREEN END OF BLOCK tabb.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /1(60) cmt_ver MODIF ID ver.
SELECTION-SCREEN COMMENT /1(60) cmt_url MODIF ID ver.
*Slinkee tab
SELECTION-SCREEN BEGIN OF SCREEN 110 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK splk WITH FRAME TITLE text-slk.
PARAMETERS import TYPE c RADIOBUTTON GROUP 2 DEFAULT 'X'
USER-COMMAND updown.
PARAMETERS export TYPE c RADIOBUTTON GROUP 2.
SELECTION-SCREEN END OF BLOCK splk.
SELECTION-SCREEN BEGIN OF BLOCK opt WITH FRAME TITLE text-opt.
PARAMETERS filename(300) LOWER CASE TYPE c MODIF ID did.
PARAMETERS slpkg TYPE tadir-devclass MODIF ID did.
PARAMETERS overwr TYPE c AS CHECKBOX MODIF ID did.
PARAMETERS plugin TYPE ko100-object MODIF ID uid.
PARAMETERS objname(40) TYPE c MODIF ID uid.
SELECTION-SCREEN END OF BLOCK opt.
SELECTION-SCREEN END OF BLOCK main.
SELECTION-SCREEN END OF SCREEN 110.
*Nugget tab
SELECTION-SCREEN BEGIN OF SCREEN 120 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK main2 WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK splk2 WITH FRAME TITLE text-slk.
PARAMETERS nugi TYPE c RADIOBUTTON GROUP 3 DEFAULT 'X'
USER-COMMAND updown.
PARAMETERS nugd TYPE c RADIOBUTTON GROUP 3.
SELECTION-SCREEN ULINE.
PARAMETERS nugc TYPE c RADIOBUTTON GROUP 3.
PARAMETERS nuga TYPE c RADIOBUTTON GROUP 3.
PARAMETERS nugp TYPE c RADIOBUTTON GROUP 3.
PARAMETERS nugr TYPE c RADIOBUTTON GROUP 3.
SELECTION-SCREEN END OF BLOCK splk2.
SELECTION-SCREEN BEGIN OF BLOCK opt2 WITH FRAME TITLE text-opt.
PARAMETERS nuggnam(300) TYPE c MODIF ID nnm.
PARAMETERS nplugin TYPE ko100-object MODIF ID npg.
PARAMETERS nobjnam(40) TYPE c MODIF ID npg.
* parameters nPlugIn type KO100-object modif id npg.
PARAMETER package TYPE tadir-devclass MODIF ID npc.
SELECT-OPTIONS reqnugg FOR e071-trkorr NO INTERVALS
NO-EXTENSION MODIF ID rnm.
PARAMETER nugfile(300) LOWER CASE TYPE c MODIF ID nfl.
PARAMETERS novrwr TYPE c AS CHECKBOX MODIF ID now.
SELECTION-SCREEN END OF BLOCK opt2.
SELECTION-SCREEN END OF BLOCK main2.
SELECTION-SCREEN END OF SCREEN 120.
*\--------------------------------------------------------------------/
*/----------------------selection screen events-----------------------\
INITIALIZATION.
CALL METHOD zsaplink=>getplugins(
CHANGING
objecttable = objecttable ).
IMPORT isslinkee FROM MEMORY ID 'ISSLNK'.
IF isslinkee = 'X'.
tabb-dynnr = 110.
tabb-activetab = 'OBJ'.
ELSE.
tabb-dynnr = 120.
tabb-activetab = 'NUGG'.
ENDIF.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
WHEN 'OBJ'.
isslinkee = 'X'.
WHEN 'NUGG'.
isslinkee = ' '.
ENDCASE.
EXPORT isslinkee TO MEMORY ID 'ISSLNK'.
AT SELECTION-SCREEN OUTPUT.
*** hide/show fields according to current selection
IF import = 'X'.
hidid = 'UID'.
IF slpkg IS INITIAL.
slpkg = '$TMP'.
ENDIF.
ELSEIF export = 'X'.
hidid = 'DID'.
ENDIF.
" Set default devclass for import
IF nugi = 'X' AND package IS INITIAL.
package = '$TMP'.
ENDIF.
LOOP AT SCREEN.
IF screen-group1 = hidid.
screen-active = '0'.
screen-invisible = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT SCREEN.
IF nugc = 'X'.
IF screen-group1 = 'NNM'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NPG'
OR screen-group1 = 'NFL'
OR screen-group1 = 'NOW'
OR screen-group1 = 'NPC'
OR screen-group1 = 'RNM'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ELSEIF nugi = 'X'.
IF screen-group1 = 'NFL'
OR screen-group1 = 'NOW'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NNM'
OR screen-group1 ='NPG'
OR screen-group1 = 'RNM'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ELSEIF nuga = 'X'.
IF screen-group1 = 'NFL'
OR screen-group1 = 'NPG'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NNM'
OR screen-group1 = 'NOW'
OR screen-group1 = 'NPC'
OR screen-group1 = 'RNM'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ELSEIF nugp = 'X'.
IF screen-group1 = 'NFL'
OR screen-group1 = 'NPC'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NNM'
OR screen-group1 = 'NOW'
OR screen-group1 = 'NPG'
OR screen-group1 = 'RNM'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ELSEIF nugd = 'X'.
IF screen-group1 = 'NFL'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NNM'
OR screen-group1 = 'NPG'
OR screen-group1 = 'NOW'
OR screen-group1 = 'NPC'
OR screen-group1 = 'RNM'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ELSEIF nugr = 'X'.
IF screen-group1 = 'NFL'
OR screen-group1 = 'RNM'.
screen-active = '1'.
screen-invisible = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'NNM'
OR screen-group1 = 'NOW'
OR screen-group1 = 'NPG'
OR screen-group1 = 'NPC'.
screen-active = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
*** value request for input fields
AT SELECTION-SCREEN ON VALUE-REQUEST FOR plugin.
REFRESH pluginlist.
LOOP AT objecttable INTO objectline.
MOVE-CORRESPONDING objectline TO pluginline.
APPEND pluginline TO pluginlist.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'OBJECT'
window_title = 'Installed Plugins'(inp)
dynpprog = sy-repid
dynpnr = '1000'
dynprofield = 'PLUGIN'
value_org = 'S'
TABLES
value_tab = pluginlist
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR nplugin.
REFRESH pluginlist.
LOOP AT objecttable INTO objectline.
MOVE-CORRESPONDING objectline TO pluginline.
APPEND pluginline TO pluginlist.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'OBJECT'
window_title = 'Installed Plugins'(inp)
dynpprog = sy-repid
dynpnr = '1000'
dynprofield = 'NPLUGIN'
value_org = 'S'
TABLES
value_tab = pluginlist
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
multiselection = abap_false
file_filter = '*.slnk'
default_extension = 'slnk'
CHANGING
file_table = retfiletable
rc = retrc
user_action = retuseraction.
READ TABLE retfiletable INTO filename INDEX 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR nugfile.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
multiselection = abap_false
file_filter = 'Nugget files (*.nugg)|*.nugg|'
default_extension = 'nugg'
CHANGING
file_table = retfiletable
rc = retrc
user_action = retuseraction.
READ TABLE retfiletable INTO nugfile INDEX 1.
* begin-->search help on objname according to selected plugin
* provided by Michael Diehl
AT SELECTION-SCREEN ON VALUE-REQUEST FOR objname.
DATA l_object_type LIKE euobj-id.
* l_object_type = plugin. "commented ewH
*ewH-->get most current value of plugin param
PERFORM get_current_screen_value USING 'PLUGIN' '0110'
CHANGING l_object_type.
IF l_object_type IS NOT INITIAL.
* rrq --> START of implementation for object specific value help
DATA: temp_object TYPE ko100-object.
* move the object type to a field like the ObjectTable expects
temp_object = l_object_type.
READ TABLE objecttable INTO objectline WITH KEY object = temp_object.
IF sy-subrc = 0.
* if it is found...intanciate it so you can call the right value help
CREATE OBJECT targetobject
TYPE
(objectline-classname)
EXPORTING
name = _objname.
_objtype = l_object_type.
CALL METHOD targetobject->valuehelp
EXPORTING
i_objtype = _objtype
RECEIVING
e_objname = _objname.
objname = _objname.
ENDIF.
*commented out...moved logic to instance method of ZSAPLINK. to be overwritten by
*objects that don't use the repository Info_system f4 Function
* CALL FUNCTION 'REPOSITORY_INFO_SYSTEM_F4'
* EXPORTING
* object_type = l_object_type
* object_name = objname
* suppress_selection = 'X'
* use_alv_grid = ''
* without_personal_list = ''
* IMPORTING
* object_name_selected = objname
* EXCEPTIONS
* cancel = 1.
*<-- rrq end of implentation for object specific value help
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR nobjnam.
DATA l_object_type LIKE euobj-id.
* l_object_type = nplugin. "commented ewH
*ewH-->get most current value of plugin param
PERFORM get_current_screen_value USING 'NPLUGIN' '0120'
CHANGING l_object_type.
IF l_object_type IS NOT INITIAL.
* rrq --> START of implementation for object specific value help
DATA: temp_object TYPE ko100-object.
* move the object type to a field like the ObjectTable expects
temp_object = l_object_type.
READ TABLE objecttable INTO objectline WITH KEY object = temp_object.
IF sy-subrc = 0.
* if it is found...intanciate it so you can call the right value help
CREATE OBJECT targetobject
TYPE
(objectline-classname)
EXPORTING
name = _objname.
_objtype = l_object_type.
CALL METHOD targetobject->valuehelp
EXPORTING
i_objtype = _objtype
RECEIVING
e_objname = _objname.
nobjnam = _objname.
ENDIF.
*commented out...moved logic to instance method of ZSAPLINK. to be overwritten by
*objects that don't use the repository Info_system f4 Function
* CALL FUNCTION 'REPOSITORY_INFO_SYSTEM_F4'
* EXPORTING
* object_type = l_object_type
* object_name = objname
* suppress_selection = 'X'
* use_alv_grid = ''
* without_personal_list = ''
* IMPORTING
* object_name_selected = objname
* EXCEPTIONS
* cancel = 1.
*<-- rrq end of implentation for object specific value help
ENDIF.
* <--end of search help on objname according to selected plugin
* provided by Michael Diehl
AT SELECTION-SCREEN ON VALUE-REQUEST FOR reqnugg-low.
iv_organizer_type = 'W'.
* is_selection-reqstatus = 'R'.
CALL FUNCTION 'TR_PRESENT_REQUESTS_SEL_POPUP'
EXPORTING
iv_organizer_type = iv_organizer_type
is_selection = is_selection
IMPORTING
es_selected_request = es_selected_request
es_selected_task = es_selected_task.
reqnugg-low = es_selected_request-trkorr.
AT LINE-SELECTION.
IF gv_version_line IS NOT INITIAL.
PERFORM show_version_info.
CLEAR gv_version_line.
ENDIF.
*\--------------------------------------------------------------------/
*/----------------------main------------------------------------------\
START-OF-SELECTION.
CLEAR: errormsg, statusmsg.
************* S L I N K E E *************
IF isslinkee IS NOT INITIAL.
_objname = objname.
IF export = 'X'.
* Export slinkee
PERFORM slinkee_export.
ELSEIF import = 'X'.
* Import slinkee
PERFORM slinkee_import.
ENDIF.
ELSE.
************* N U G G E T *************
IF nugc = 'X'.
* create empty nugget
PERFORM nugget_create.
ELSEIF nuga = 'X'.
* add object to nugget
PERFORM nugget_add_object.
ELSEIF nugi = 'X'.
* import nugget
PERFORM nugget_import.
ELSEIF nugd = 'X'.
* display objects in a nugget
PERFORM nugget_display.
ELSEIF nugp = 'X'.
* add package to nugget
PERFORM nugget_add_package.
* rrq: enhancement 42-->
ELSEIF nugr = 'X'.
* add objects from a transport to a nugget
PERFORM nugget_add_from_transport.
ENDIF.
ENDIF.
*\--------------------------------------------------------------------/
*/----------------------displayXMLOnScreen----------------------------\
FORM displayxmlonscreen USING xmlstring TYPE string.
DATA printxmldoc TYPE REF TO cl_xml_document.
DATA rc TYPE sysubrc.
CREATE OBJECT printxmldoc.
rc = printxmldoc->parse_string( xmlstring ).
CALL METHOD printxmldoc->display( ).
ENDFORM. "displayXMLOnScreen
*\--------------------------------------------------------------------/
*/----------------------downloadXMLToLM-------------------------------\
FORM downloadxmltolm USING deffilename TYPE string
xmlstring TYPE string
CHANGING _errorflag TYPE flag.
DATA retfilename TYPE string.
DATA retpath TYPE string.
DATA retfullpath TYPE string.
DATA retuseract TYPE i.
DATA deffilename_cleaned TYPE string.
CLEAR _errorflag.
"*--- get rid of namespace slashes ---*
deffilename_cleaned = deffilename.
REPLACE ALL OCCURRENCES OF '/' IN deffilename_cleaned WITH '.'.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
default_file_name = deffilename_cleaned
CHANGING
filename = retfilename
path = retpath
fullpath = retfullpath
user_action = retuseract.
IF retuseract <> 0.
_errorflag = 'X'.
ELSE.
PERFORM putonmachine USING retfullpath xmlstring.
ENDIF.
ENDFORM. "downloadXMLToLM
*\--------------------------------------------------------------------/
*/------------------------putOnMachine--------------------------------\
FORM putonmachine USING fullpath TYPE string xmlstring TYPE string.
*rrq: issue 43--> replace binary with char table
*old code removed, use subversion for recovery
*types: begin of t_char,
* maxChar(65535) type C,
* end of t_char.
*data: tempTable_char type table of t_char,
* DATA: temptable_char TYPE table_of_strings,
* tempstring TYPE string.
" Gregor Wolf, 2012-02-19: Switch to binary download as it's done in ZAKE
DATA xlm_xstring TYPE xstring.
DATA temptable TYPE w3mimetabtype.
DATA bin_filesize TYPE i.
IF retuseract = 0.
" Gregor Wolf, 2012-02-19:
" Independent of Server OS the download should always use Windows Linebreaks
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>cr_lf
IN xmlstring WITH cl_abap_char_utilities=>newline.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>newline
IN xmlstring WITH cl_abap_char_utilities=>cr_lf.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = xmlstring
IMPORTING
buffer = xlm_xstring.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = xlm_xstring
IMPORTING
output_length = bin_filesize
TABLES
binary_tab = temptable.
cl_gui_frontend_services=>gui_download(
EXPORTING
bin_filesize = bin_filesize
filename = fullpath
filetype = 'BIN'
CHANGING
data_tab = temptable
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24
).
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* SPLIT xmlstring AT cl_abap_char_utilities=>cr_lf
* INTO TABLE temptable_char.
* CALL METHOD cl_gui_frontend_services=>gui_download
* EXPORTING
* filename = fullpath
* filetype = 'DAT'
* CHANGING
* data_tab = temptable_char.
ENDIF.
*<--rrq: issue 43
ENDFORM. "putOnMachine
*\--------------------------------------------------------------------/
*/----------------------uploadXMLFromLM-------------------------------\
FORM uploadxmlfromlm USING p_filename xmlstring TYPE string .
DATA retfiletable TYPE filetable.
DATA retrc TYPE sysubrc.
DATA retuseraction TYPE i.
DATA temptable TYPE table_of_strings.
DATA temptable_bin TYPE TABLE OF x255.
DATA filelength TYPE i.
DATA l_filename TYPE string.
l_filename = p_filename.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN' " File Type Binary
IMPORTING
filelength = filelength
CHANGING
data_tab = temptable_bin
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN '1'.
PERFORM writemessage USING 'E' 'File Open Error'.
sy-subrc = 4.
EXIT.
WHEN OTHERS.
PERFORM writemessage USING 'E' 'Unknown Error occured'.
sy-subrc = 4.
EXIT.
ENDCASE.
ENDIF.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
EXPORTING
input_length = filelength
IMPORTING
text_buffer = xmlstring
TABLES
binary_tab = temptable_bin
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
" Just catch the sy-subrc when there was nothing replaced
sy-subrc = 0.
ENDIF.
* call method CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
* exporting
* FILENAME = l_fileName
* changing
* data_tab = tempTable.
* PERFORM createstring USING temptable CHANGING xmlstring.
ENDFORM. "uploadXMLFromLM
*\--------------------------------------------------------------------/
**/----------------------createString----------------------------------\
*FORM createstring
* USING
* temptable TYPE table_of_strings
* CHANGING
* bigstring TYPE string.
* DATA stemp TYPE string.
* LOOP AT temptable INTO stemp.
* CONCATENATE bigstring stemp cl_abap_char_utilities=>cr_lf
* INTO bigstring.
* ENDLOOP.
*
*ENDFORM. "createString
**\--------------------------------------------------------------------/
*/----------------------installObject---------------------------------\
FORM installobject USING l_ixmldocument TYPE REF TO if_ixml_document
l_overwriteflag TYPE flag
VALUE(l_package) TYPE tadir-devclass
CHANGING l_errorflag TYPE flag
l_message TYPE string.
DATA l_objname TYPE string.
DATA l_objtype TYPE string.
* DATA l_objtable TYPE TABLE OF t_objecttable. " del Stefan
STATICS l_objtable TYPE TABLE OF t_objecttable. " ins Stefan
DATA l_objline TYPE t_objecttable.
DATA l_targetobject TYPE REF TO zsaplink.
DATA l_installobject TYPE string.
DATA l_excclass TYPE REF TO zcx_saplink.
CLEAR l_errorflag.
TRY.
CALL METHOD zsaplink=>getobjectinfofromixmldoc
EXPORTING
ixmldocument = l_ixmldocument
IMPORTING
objtypename = l_objtype
objname = l_objname.
CATCH zcx_saplink.
l_errorflag = 'X'.
l_message = 'Error retrieving object information ixml document'.
ENDTRY.
IF l_objtable IS INITIAL. " ins Stefan
CALL METHOD zsaplink=>getplugins( CHANGING objecttable = l_objtable ).
ENDIF. " ins Stefan
READ TABLE l_objtable INTO l_objline WITH KEY object = l_objtype.
IF sy-subrc <> 0.
CONCATENATE 'There is no installed SAPlink plugin for object type'
l_objtype l_objline-text INTO l_message SEPARATED BY space.
l_errorflag = 'X'.
ELSE.
CREATE OBJECT l_targetobject
TYPE
(l_objline-classname)
EXPORTING
name = l_objname.
IF l_package IS INITIAL.
l_package = '$TMP'.
ENDIF.
TRY.
l_installobject = l_targetobject->createobjectfromixmldoc(
ixmldocument = l_ixmldocument
devclass = l_package "Allow overwrite of default devclass.
overwrite = l_overwriteflag ).
* bad times
CATCH zcx_saplink INTO l_excclass.
l_message = l_excclass->get_text( ).
l_errorflag = 'X'.
ENDTRY.
* good times
IF l_installobject IS NOT INITIAL.
CONCATENATE 'Installed: ' l_objtype '-' l_installobject
INTO l_message SEPARATED BY space.
ENDIF.
ENDIF.
ENDFORM. "installObject
*\--------------------------------------------------------------------/
*/----------------------confirmOverwrite------------------------------\
FORM confirmoverwrite USING l_objinfo TYPE string
CHANGING l_answer TYPE flag.
DATA l_message TYPE string.
DATA l_title TYPE string.
CLEAR l_answer.
l_title = 'Overwrite confirm. Proceed with CAUTION!'.
CONCATENATE 'You have selected to overwrite originals.'
l_objinfo 'will be overwritten. Are you sure?'
INTO l_message SEPARATED BY space.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = l_title
text_question = l_message
text_button_1 = 'Yes'
text_button_2 = 'Yes to all'
default_button = '1'
display_cancel_button = 'X'
IMPORTING
answer = l_answer.
ENDFORM. "confirmOverwrite
*\--------------------------------------------------------------------/
*/----------------------checkObject-----------------------------------\
FORM checkobject USING l_ixmldocument TYPE REF TO if_ixml_document
CHANGING l_objtype TYPE string
l_objname TYPE string
l_pluginexists TYPE flag
l_objectexists TYPE flag.
zsaplink=>checkobject(
EXPORTING
i_ixmldocument = l_ixmldocument " IF_IXML_DOCUMENT
IMPORTING
e_objtype = l_objtype
e_objname = l_objname
e_pluginexists = l_pluginexists " General Flag
e_objectexists = l_objectexists " General Flag
).
ENDFORM. "checkObject
*\--------------------------------------------------------------------/
*/---------------------get_current_screen_value-----------------------\
FORM get_current_screen_value USING l_screen_field
l_screen_number
CHANGING l_screen_value.
DATA it_dynpfields TYPE STANDARD TABLE OF dynpread.
DATA wa_dynpfields TYPE dynpread.
wa_dynpfields-fieldname = l_screen_field.
APPEND wa_dynpfields TO it_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = l_screen_number
translate_to_upper = 'X'
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
TABLES
dynpfields = it_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
READ TABLE it_dynpfields INTO wa_dynpfields
WITH KEY fieldname = l_screen_field.
IF sy-subrc = 0.
l_screen_value = wa_dynpfields-fieldvalue.
ENDIF.
ENDIF.
ENDFORM. " get_current_screen_value
*/---------------------writeMessage-----------------------\
FORM writemessage USING VALUE(p_type) TYPE sy-msgty
VALUE(p_msg).
CASE p_type.
WHEN 'E' OR 'A' OR 'X'.
WRITE / icon_led_red AS ICON.
WHEN 'W'.
WRITE / icon_led_yellow AS ICON.
WHEN OTHERS.
WRITE / icon_led_green AS ICON.
ENDCASE.
WRITE p_msg.
ENDFORM. "WriteMessage
*/-------------------------pf_status_set-------------------\
FORM pf_status_set USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'SELOBJ' EXCLUDING rt_extab.
ENDFORM. "pf_status_set
*/-------------------------user_command_user-------------------\
FORM user_command_user USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN 'TAKE'.
rs_selfield-exit = 'X'.
ENDCASE.
ENDFORM. "user_command_user
*---------------build_fieldCatalog---------------------------------*
FORM build_fieldcatalog .
*** Display list to select the objects for downloading
ls_fieldcat-fieldname = 'OBJECT'.
ls_fieldcat-seltext_l = 'Object/Plugin'.
APPEND ls_fieldcat TO lt_fieldcat.
ls_fieldcat-fieldname = 'OBJECT_TXT'.
ls_fieldcat-seltext_l = 'Object/Plugin'.
APPEND ls_fieldcat TO lt_fieldcat.
ls_fieldcat-fieldname = 'OBJ_NAME'.
ls_fieldcat-seltext_l = 'Object name'.
APPEND ls_fieldcat TO lt_fieldcat.
ls_fieldcat-fieldname = 'DOWN_FLAG'.
ls_fieldcat-seltext_s = 'Plugin'.
ls_fieldcat-seltext_l =
'Plugin available'.
APPEND ls_fieldcat TO lt_fieldcat.
ls_fieldcat-fieldname = 'MSG'.
ls_fieldcat-seltext_s = 'Message'.
ls_fieldcat-seltext_l =
'Status Message'.
APPEND ls_fieldcat TO lt_fieldcat.
ls_layout-box_fieldname = 'SELECT'.
ls_layout-f2code = 'MYPICK' .
ls_layout-colwidth_optimize = 'X'.
ls_layout-lights_fieldname = 'STATUS'.
ENDFORM. " build_fieldCatalog
*&--------------------------------------------------------------------*
*& Form ShowInitialGrid
FORM showinitialgrid TABLES p_objects.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZSAPLINK'
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND_USER'
i_grid_title = 'Select objects'
it_fieldcat = lt_fieldcat
is_layout = ls_layout
TABLES
t_outtab = p_objects
EXCEPTIONS
OTHERS = 0.
ENDFORM. " ShowInitialGrid
*&---------------------------------------------------------------------*
*& Form showResultsGrid
FORM showresultsgrid TABLES p_objects.
* ** Display results
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZSAPLINK'
i_callback_user_command = 'USER_COMMAND_USER'
it_fieldcat = lt_fieldcat
i_grid_title = 'Download results'
is_layout = ls_layout
TABLES
t_outtab = p_objects
EXCEPTIONS
OTHERS = 0.
ENDFORM. " showResultsGrid
*&---------------------------------------------------------------------*
*& Form check_objects
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM check_objects .
DATA: lo_object TYPE REF TO object,
lo_saplink TYPE REF TO zsaplink,
l_flag TYPE flag,
l_name TYPE string.
DATA: ptab TYPE abap_parmbind_tab,
ptab_line TYPE abap_parmbind.
LOOP AT objects_package ASSIGNING <obj>.
* Check what can be downloaded and what can not.
READ TABLE objecttable INTO objectline
WITH KEY object = <obj>-object.
IF sy-subrc = 0.
* Validate if object is fully implemented and can be accessed
REFRESH ptab.
ptab_line-name = 'NAME'.
ptab_line-kind = cl_abap_objectdescr=>exporting.
l_name = <obj>-obj_name.
GET REFERENCE OF l_name
INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
CREATE OBJECT lo_object
TYPE
(objectline-classname)
PARAMETER-TABLE
ptab.
lo_saplink ?= lo_object.
l_flag = lo_saplink->checkexists( ).
* Plug-in exists... set flag and make selected by default
IF l_flag IS NOT INITIAL.
<obj>-down_flag = 'X'.
<obj>-select = 'X'.
ELSE.
DELETE TABLE objects_package FROM <obj>.
CONTINUE.
ENDIF.
ELSE.
<obj>-msg = 'No Plugin Available'.
<obj>-down_flag = ' '.
ENDIF.
* get texts
REFRESH tabletypesin.
tabletypeline-object = <obj>-object.
APPEND tabletypeline TO tabletypesin.
CALL FUNCTION 'TRINT_OBJECT_TABLE'
TABLES
tt_types_in = tabletypesin
tt_types_out = tabletypesout.
LOOP AT tabletypesout INTO tabletypeoutline.
<obj>-object = tabletypeoutline-object.
<obj>-object_txt = tabletypeoutline-text.
ENDLOOP.
ENDLOOP.
SORT objects_package BY down_flag DESCENDING object ASCENDING.
ENDFORM. " check_objects
*&---------------------------------------------------------------------*
*& Form CreateEmptyNugget
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM createemptynugget USING p_nuggname.
ixmldocument = zsaplink_nugget=>createemptyxml(
nuggetname = p_nuggname ).
xml = zsaplink=>convertixmldoctostring( ixmldocument ).
CONCATENATE 'NUGG_' p_nuggname '.nugg' INTO stemp.
CLEAR errorflag.
PERFORM downloadxmltolm USING stemp xml
CHANGING errorflag.
IF errorflag IS NOT INITIAL.
EXIT.
ENDIF.
ENDFORM. " CreateEmptyNugget
*rrq: enhancement 3 & 42-->
*&---------------------------------------------------------------------*
*& Form addObjectstoNugget
*&---------------------------------------------------------------------*
FORM addobjectstonugget .
PERFORM check_objects.
PERFORM build_fieldcatalog.
PERFORM showinitialgrid TABLES objects_package.
IF sy-ucomm <> 'TAKE'.
RETURN.
ENDIF .
* Downloading
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = 1
text = 'Upload file'.
PERFORM uploadxmlfromlm USING nugfile xml.
ixmldocument = zsaplink=>convertstringtoixmldoc( xml ).
TRY.
CREATE OBJECT nugg
EXPORTING
ixmldocument = ixmldocument.
CATCH zcx_saplink.
MESSAGE 'Internal error createing nugget ' TYPE 'I'.
RETURN.
ENDTRY.
DESCRIBE TABLE objects_package LINES lv_count.
LOOP AT objects_package ASSIGNING <obj>
WHERE down_flag = 'X' AND select = 'X'.
lv_pers = sy-tabix * 100 / lv_count .
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = lv_pers
text = <obj>-obj_name.
_objname = <obj>-obj_name. "nobjNam.
stemp = <obj>-object. "nplugin.
TRY.
nugg->addobjecttonugget(
objname = _objname objtype = stemp ).
CATCH zcx_saplink INTO excclass.
errormsg = excclass->get_text( ).
* perform writeMessage using 'E' errorMsg.
<obj>-msg = errormsg.
<obj>-status = 1.
CONTINUE.
ENDTRY.
<obj>-msg = 'Added to nugget'.
<obj>-status = 3.
ENDLOOP.
READ TABLE objects_package INTO packageline
WITH KEY status = 3. "ewH:do not download if none added
IF sy-subrc = 0.
ixmldocument = nugg->createixmldocfromnugget( ).
xml = zsaplink=>convertixmldoctostring( ixmldocument ).
stemp = nugfile.
PERFORM putonmachine USING stemp xml.
ENDIF.
PERFORM showresultsgrid TABLES objects_package.
ENDFORM. " addObjectstoNugget
* <--rrq: enhancement 3 & 42
*&---------------------------------------------------------------------*
*& Form WRITE_PLUGIN_VERSION_INFO
*&---------------------------------------------------------------------*
* Inform of updated versions of plugins if information found in file
*----------------------------------------------------------------------*
FORM write_plugin_version_info USING io_ixml_document TYPE REF TO if_ixml_document
iv_object_type TYPE clike.
DATA: rootnode TYPE REF TO if_ixml_node,
rootattr TYPE REF TO if_ixml_named_node_map,
attrnode TYPE REF TO if_ixml_node,
nodename TYPE string,
attributelist TYPE REF TO if_ixml_named_node_map,
nodeiterator TYPE REF TO if_ixml_node_iterator,
attributenode TYPE REF TO if_ixml_node,
value TYPE string,
name TYPE string,
ls_version_delta LIKE LINE OF gt_versions_delta.
FIELD-SYMBOLS:<value> TYPE any,
<ls_objecttable> LIKE LINE OF objecttable.
*--------------------------------------------------------------------*
* Get Version information from class
*--------------------------------------------------------------------*
READ TABLE objecttable ASSIGNING <ls_objecttable> WITH KEY object = iv_object_type.
CHECK sy-subrc = 0. " No corresponding plugin --> we already display a message "missing plugin"
ls_version_delta-version_sap = zsaplink=>get_version_info_static( <ls_objecttable>-classname ).
*--------------------------------------------------------------------*
* Get Version information from ixml
*--------------------------------------------------------------------*
CHECK io_ixml_document IS BOUND. " no need to continue if this is no valid ixml document
rootnode ?= io_ixml_document->get_root_element( ).
attributelist = rootnode->get_attributes( ).
CHECK attributelist IS BOUND.
nodeiterator = attributelist->create_iterator( ).
CHECK nodeiterator IS BOUND.
attributenode = nodeiterator->get_next( ).
WHILE attributenode IS NOT INITIAL.
name = attributenode->get_name( ).
ASSIGN COMPONENT name OF STRUCTURE ls_version_delta-version_ixml TO <value>.
IF sy-subrc = 0.
<value> = attributenode->get_value( ).
ENDIF.
attributenode = nodeiterator->get_next( ).
ENDWHILE.
*--------------------------------------------------------------------*
* Compare versions
*--------------------------------------------------------------------*
ls_version_delta-classname = <ls_objecttable>-classname.
* Major version
IF ls_version_delta-version_ixml-zsaplink_plugin_major_version < ls_version_delta-version_sap-zsaplink_plugin_major_version.
RETURN. " we have a newer version --> good
ELSEIF ls_version_delta-version_ixml-zsaplink_plugin_major_version > ls_version_delta-version_sap-zsaplink_plugin_major_version.
WRITE: 'Major update in plugin' COLOR 6,
<ls_objecttable>-classname COLOR 3,
'. Update of plugin necessary --> see information' COLOR 6, icon_information AS ICON HOTSPOT ON.
APPEND ls_version_delta TO gt_versions_delta.
gv_version_line = sy-tabix.
HIDE gv_version_line.
CLEAR gv_version_line.
RETURN.
ENDIF.
* Major version equal - now check minor version
IF ls_version_delta-version_ixml-zsaplink_plugin_minor_version < ls_version_delta-version_sap-zsaplink_plugin_minor_version.
RETURN. " we have a newer version --> good
ELSEIF ls_version_delta-version_ixml-zsaplink_plugin_minor_version > ls_version_delta-version_sap-zsaplink_plugin_minor_version.
WRITE: 'Minor update in plugin' COLOR 7,
<ls_objecttable>-classname COLOR 3,
'. Update of plugin recommended --> see information' COLOR 7, icon_information AS ICON HOTSPOT ON.
APPEND ls_version_delta TO gt_versions_delta.
gv_version_line = sy-tabix.
HIDE gv_version_line.
CLEAR gv_version_line.
RETURN.
ENDIF.
* Major and minor version equal - build-numer doesn't matter here
ENDFORM. " WRITE_PLUGIN_VERSION_INFO
*&---------------------------------------------------------------------*
*& Form SHOW_VERSION_INFO
*&---------------------------------------------------------------------*
FORM show_version_info.
FIELD-SYMBOLS: <ls_version_delta> LIKE LINE OF gt_versions_delta.
READ TABLE gt_versions_delta ASSIGNING <ls_version_delta> INDEX gv_version_line.
CHECK sy-subrc = 0.
WRITE:/ 'New version of class', <ls_version_delta>-classname COLOR 6,'found'.
SKIP 2.
IF <ls_version_delta>-version_ixml-zsaplink_plugin_major_version > <ls_version_delta>-version_sap-zsaplink_plugin_major_version.
WRITE:/ 'Major version - Installed in SAP:' COLOR 7, <ls_version_delta>-version_sap-zsaplink_plugin_major_version COLOR 7,
/ 'Major version - Found in file:' COLOR 7 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_major_version COLOR 7.
ELSEIF <ls_version_delta>-version_ixml-zsaplink_plugin_minor_version > <ls_version_delta>-version_sap-zsaplink_plugin_minor_version.
WRITE:/ 'Minor version - Installed in SAP:' COLOR 7, <ls_version_delta>-version_sap-zsaplink_plugin_minor_version COLOR 7,
/ 'Minor version - Found in file:' COLOR 7 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_minor_version COLOR 7.
ENDIF.
WRITE:/ 'Build - Installed in SAP:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_sap-zsaplink_plugin_build_version,
/ 'Build - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_build_version.
SKIP.
WRITE:/ 'Info - Part1 - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_info1,
/ 'Info - Part2 - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_info2,
/ 'Info - Part3 - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_info3,
/ 'Info - Part4 - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_info4,
/ 'Info - Part5 - Found in file:' COLOR 5 INTENSIFIED OFF, <ls_version_delta>-version_ixml-zsaplink_plugin_info5.
ENDFORM. " SHOW_VERSION_INFO
*&---------------------------------------------------------------------*
*& Form SLINKEE_EXPORT
*&---------------------------------------------------------------------*
FORM slinkee_export.
IF plugin IS INITIAL.
MESSAGE s208(00) WITH 'object type required'.
EXIT.
ELSEIF _objname IS INITIAL.
MESSAGE s208(00) WITH 'object name required'.
EXIT.
ENDIF.
READ TABLE objecttable INTO objectline WITH KEY object = plugin.
IF sy-subrc <> 0.
CONCATENATE 'Plugin for object type'(plo) plugin
'is not installed on this system'(noi) INTO errormsg
SEPARATED BY space.
PERFORM writemessage USING 'E' errormsg.
EXIT.
ENDIF.
CREATE OBJECT targetobject
TYPE
(objectline-classname)
EXPORTING
name = _objname.
TRY.
ixmldocument = targetobject->createixmldocfromobject( ).
CATCH zcx_saplink INTO excclass.
errormsg = excclass->get_text( ).
PERFORM writemessage USING 'E' errormsg.
ENDTRY.
IF errormsg IS NOT INITIAL.
EXIT.
ENDIF.
xml = zsaplink=>convertixmldoctostring( ixmldocument ).
CONCATENATE plugin '_' _objname '.slnk' INTO deffilename.
CLEAR errorflag.
PERFORM downloadxmltolm USING deffilename xml
CHANGING errorflag.
IF errorflag IS NOT INITIAL.
MESSAGE s208(00) WITH 'Action cancelled'.
EXIT.
ENDIF.
PERFORM displayxmlonscreen USING xml.
ENDFORM. " SLINKEE_EXPORT
*&---------------------------------------------------------------------*
*& Form SLINKEE_IMPORT
*&---------------------------------------------------------------------*
FORM slinkee_import .
IF filename IS INITIAL.
MESSAGE s208(00) WITH 'slinkee filename required'.
EXIT.
ENDIF.
PERFORM uploadxmlfromlm USING filename xml.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ixmldocument = zsaplink=>convertstringtoixmldoc( xml ).
* run some checks before install
PERFORM checkobject USING ixmldocument
CHANGING _objtype
_objname
_pluginexists
_objectexists.
MOVE _objtype TO plugin.
READ TABLE objecttable INTO objectline WITH KEY object = plugin.
IF _objtype = 'NUGG'.
MESSAGE s208(00) WITH 'use nugget tab for nugget import'.
EXIT.
ELSEIF _pluginexists IS INITIAL.
CONCATENATE 'Plugin for object type'(plo) _objtype
'is not installed on this system'(noi) INTO errormsg
SEPARATED BY space.
PERFORM writemessage USING 'E' errormsg.
EXIT.
ELSEIF _objectexists = 'X' AND overwr IS INITIAL.
CONCATENATE _objtype objectline-text _objname
'already exists. Use overwrite orginals option to replace'
INTO errormsg SEPARATED BY space.
PERFORM writemessage USING 'E' errormsg.
EXIT.
ELSEIF _objectexists = 'X' AND overwr = 'X'.
CONCATENATE _objtype _objname INTO stemp SEPARATED BY space.
PERFORM confirmoverwrite USING stemp
CHANGING _flag.
IF _flag = 'A'. "cancel
PERFORM writemessage USING 'W' 'Import cancelled by user'.
EXIT.
ENDIF.
ENDIF.
* install object
PERFORM installobject USING ixmldocument
overwr
slpkg
CHANGING errorflag
statusmsg.
IF errorflag = 'X'.
PERFORM writemessage USING 'E' statusmsg.
EXIT.
ELSE.
PERFORM writemessage USING 'S' statusmsg.
ENDIF.
MESSAGE s208(00) WITH 'Import successful'.
ENDFORM. " SLINKEE_IMPORT
*&---------------------------------------------------------------------*
*& Form NUGGET_CREATE
*&---------------------------------------------------------------------*
FORM nugget_create .
IF nuggnam IS INITIAL.
MESSAGE s208(00) WITH 'enter name of new nugget to be created'.
EXIT.
ENDIF.
stemp = nuggnam.
PERFORM createemptynugget USING stemp.
ENDFORM. " NUGGET_CREATE
*&---------------------------------------------------------------------*
*& Form NUGGET_ADD_OBJECT
*&---------------------------------------------------------------------*
FORM nugget_add_object .
IF nplugin IS INITIAL.
MESSAGE s208(00) WITH 'object type required'.
EXIT.
ELSEIF nobjnam IS INITIAL.
MESSAGE s208(00) WITH 'object name required'.
EXIT.
ELSEIF nugfile IS INITIAL.
MESSAGE s208(00) WITH 'nugget filename required'.
EXIT.
ENDIF.
READ TABLE objecttable INTO objectline WITH KEY object = nplugin.
IF sy-subrc <> 0.
CONCATENATE 'Plugin for object type'(plo) nplugin
'is not installed on this system'(noi) INTO errormsg
SEPARATED BY space.
PERFORM writemessage USING 'E' errormsg.
EXIT.
ENDIF.
stemp = nuggnam.
PERFORM uploadxmlfromlm USING nugfile xml.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ixmldocument = zsaplink=>convertstringtoixmldoc( xml ).
CREATE OBJECT nugg
EXPORTING
ixmldocument = ixmldocument.
_objname = nobjnam.
stemp = nplugin.
TRY.
nugg->addobjecttonugget( objname = _objname objtype = stemp ).
CATCH zcx_saplink INTO excclass.
errormsg = excclass->get_text( ).
PERFORM writemessage USING 'E' errormsg.
EXIT.
ENDTRY.
ixmldocument = nugg->createixmldocfromnugget( ).
xml = zsaplink=>convertixmldoctostring( ixmldocument ).
* concatenate nuggNam '.nugg' into sTemp.
stemp = nugfile.
PERFORM putonmachine USING stemp xml.
ENDFORM. " NUGGET_ADD_OBJECT
*&---------------------------------------------------------------------*
*& Form NUGGET_IMPORT
*&---------------------------------------------------------------------*
FORM nugget_import .
IF nugfile IS INITIAL.
MESSAGE s208(00) WITH 'nugget filename required'.
EXIT.
ENDIF.
PERFORM uploadxmlfromlm USING nugfile xml.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ixmldocument = zsaplink=>convertstringtoixmldoc( xml ).
nuggetname = zsaplink_nugget=>getnuggetinfo( ixmldocument ).
CONCATENATE 'Start import of nugget' nuggetname INTO statusmsg
SEPARATED BY space.
PERFORM writemessage USING 'S' statusmsg.
SKIP.
CREATE OBJECT nugg
EXPORTING
ixmldocument = ixmldocument.
* check for installed plugins
CLEAR errorflag.
REFRESH it_nuggetobject.
anxmldoc = nugg->getnextobject( ).
WHILE anxmldoc IS NOT INITIAL.
CLEAR: _objtype, _objname, _pluginexists, _objectexists,
wa_nuggetobject.
PERFORM checkobject USING anxmldoc
CHANGING _objtype
_objname
_pluginexists
_objectexists.
IF _pluginexists IS INITIAL.
CONCATENATE 'Plugin for object type'(plo) _objtype
'is not installed on this system'(noi) INTO errormsg
SEPARATED BY space.
PERFORM writemessage USING 'E' errormsg.
errorflag = 'X'.
ELSEIF _objectexists = 'X' AND novrwr IS INITIAL.
CONCATENATE _objtype _objname 'already exists. Use overwrite'
'orginals option to replace'
INTO errormsg SEPARATED BY space.
PERFORM writemessage USING 'W' errormsg.
PERFORM write_plugin_version_info USING anxmldoc
_objtype.
errorflag = 'X'.
else.
CONCATENATE _objtype _objname
INTO errormsg SEPARATED BY space.
PERFORM writemessage USING 'S' errormsg.
PERFORM write_plugin_version_info USING anxmldoc
_objtype.
ENDIF.
wa_nuggetobject-objtype = _objtype.
wa_nuggetobject-objname = _objname.
wa_nuggetobject-exists = _objectexists.
APPEND wa_nuggetobject TO it_nuggetobject.
anxmldoc = nugg->getnextobject( ).
ENDWHILE.
IF errorflag = 'X'.
EXIT.
ENDIF.
* confirm overwrite
LOOP AT it_nuggetobject INTO wa_nuggetobject WHERE exists = 'X'.
CLEAR _flag.
CONCATENATE wa_nuggetobject-objtype wa_nuggetobject-objname
INTO stemp SEPARATED BY space.
PERFORM confirmoverwrite USING stemp
CHANGING _flag.
IF _flag = '1'. "yes
CONTINUE.
ELSEIF _flag = '2'. "yes to all
CLEAR errorflag.
EXIT.
ELSEIF _flag = 'A'. "cancel
PERFORM writemessage USING 'W' 'Import cancelled by user'.
errorflag = 'X'.
EXIT.
ENDIF.
ENDLOOP.
IF errorflag = 'X'.
EXIT.
ENDIF.
* install
nugg->reset( ). "reset nugget iterator
anxmldoc = nugg->getnextobject( ).
WHILE anxmldoc IS NOT INITIAL.
CLEAR statusmsg.
PERFORM installobject USING anxmldoc
novrwr
package
CHANGING errorflag
statusmsg.
IF errorflag = 'X'.
PERFORM writemessage USING 'E' statusmsg.
EXIT.
ELSE.
PERFORM writemessage USING 'S' statusmsg.
anxmldoc = nugg->getnextobject( ).
ENDIF.
ENDWHILE.
IF errorflag = 'X'.
EXIT.
ENDIF.
ENDFORM. " NUGGET_IMPORT
*&---------------------------------------------------------------------*
*& Form NUGGET_DISPLAY
*&---------------------------------------------------------------------*
FORM nugget_display .
IF nugfile IS INITIAL.
MESSAGE s208(00) WITH 'nugget filename required'.
EXIT.
ENDIF.
PERFORM uploadxmlfromlm USING nugfile xml.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ixmldocument = zsaplink=>convertstringtoixmldoc( xml ).
TRY.
nuggetname = zsaplink_nugget=>getnuggetinfo( ixmldocument ).
CATCH zcx_saplink.
WRITE:/ 'Internal error in nuggethandling - program aborted'.
RETURN.
ENDTRY.
WRITE: / 'Object list for nugget ', nuggetname. SKIP.
CREATE OBJECT nugg
EXPORTING
ixmldocument = ixmldocument.
anxmldoc = nugg->getnextobject( ).
IF anxmldoc IS INITIAL.
errormsg = 'You have an empty Nugget'.
PERFORM writemessage USING 'W' errormsg.
EXIT.
ENDIF.
WHILE anxmldoc IS NOT INITIAL.
TRY.
CALL METHOD zsaplink=>getobjectinfofromixmldoc
EXPORTING
ixmldocument = anxmldoc
IMPORTING
objtypename = _objtype
objname = _objname.
CATCH zcx_saplink.
errormsg = 'You have a corrupt Nugget'.
PERFORM writemessage USING 'E' errormsg.
EXIT.
ENDTRY.
CONCATENATE _objtype _objname INTO statusmsg SEPARATED BY space.
PERFORM writemessage USING 'S' statusmsg.
PERFORM write_plugin_version_info USING anxmldoc
_objtype.
anxmldoc = nugg->getnextobject( ).
ENDWHILE.
ENDFORM. " NUGGET_DISPLAY
*&---------------------------------------------------------------------*
*& Form NUGGET_ADD_PACKAGE
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
FORM nugget_add_package .
* rrq: enhancement 3-->
IF package IS INITIAL.
MESSAGE s208(00) WITH 'package required'.
EXIT.
ENDIF.
IF nugfile IS INITIAL.
MESSAGE s208(00) WITH 'nugget filename required'.
EXIT.
ENDIF.
"// Mar: Added logic discard deleted objects from Package - 10/05/2009
IF sy-saprl NE '701'.
"// Mar: Added logic discard deleted objects from Package - 10/05/2009
SELECT object obj_name srcsystem " ##TOO_MANY_ITAB_FIELDS
FROM tadir
INTO CORRESPONDING FIELDS OF TABLE objects_package
WHERE devclass EQ package
AND pgmid EQ 'R3TR'.
"// Mar: Added logic discard deleted objects from Package - 10/05/2009
ELSE.
SELECT object obj_name srcsystem " ##TOO_MANY_ITAB_FIELDS
FROM tadir
INTO CORRESPONDING FIELDS OF TABLE objects_package
WHERE devclass EQ package
AND pgmid EQ 'R3TR'
AND delflag NE 'X'.
ENDIF.
"// Mar: Added logic discard deleted objects from Package - 10/05/2009
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Package does not exist or empty'.
RETURN.
ENDIF.
PERFORM addobjectstonugget.
* <-- rrq: enhancement 3
ENDFORM. " NUGGET_ADD_PACKAGE
*&---------------------------------------------------------------------*
*& Form NUGGET_ADD_FROM_TRANSPORT
*&---------------------------------------------------------------------*
FORM nugget_add_from_transport .
DATA: reqname TYPE string.
DATA: l_trkorr TYPE e07t-trkorr,
l_as4text TYPE e07t-as4text.
IF nugfile IS INITIAL.
MESSAGE s208(00) WITH 'nugget filename required'.
EXIT.
ENDIF.
IF reqnugg[] IS INITIAL.
MESSAGE s208(00) WITH 'Request number required'.
EXIT.
ENDIF.
SELECT SINGLE trkorr FROM e070 INTO l_trkorr
WHERE trkorr IN reqnugg.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Transport not found'.
EXIT.
ENDIF.
SELECT SINGLE trkorr as4text
FROM e07t
INTO (l_trkorr, l_as4text)
WHERE trkorr IN reqnugg
AND langu EQ sy-langu.
* ewH-->retrieve tasks as well as transports
RANGES: ra_reqnugg FOR e070-trkorr.
DATA: wa_trkorr TYPE e070-trkorr,
it_trkorr TYPE TABLE OF e070-trkorr,
wa_reqnugg LIKE LINE OF ra_reqnugg.
SELECT trkorr FROM e070 INTO TABLE it_trkorr
WHERE strkorr IN reqnugg.
ra_reqnugg[] = reqnugg[].
LOOP AT it_trkorr INTO wa_trkorr.
wa_reqnugg-sign = 'I'.
wa_reqnugg-option = 'EQ'.
wa_reqnugg-low = wa_trkorr.
APPEND wa_reqnugg TO ra_reqnugg.
ENDLOOP.
* <--ewH
SELECT object obj_name
FROM e071
INTO TABLE it_requestobject
* WHERE TRKORR in ReqNugg.
WHERE trkorr IN ra_reqnugg "ewH
AND pgmid = 'R3TR'. "ewH: don't need subobjects
IF sy-subrc = 0.
reqname = l_trkorr.
ELSE.
MESSAGE s208(00) WITH 'No R3TR objects in request'.
EXIT.
ENDIF.
LOOP AT it_requestobject INTO wa_requestobject.
MOVE-CORRESPONDING wa_requestobject TO packageline.
APPEND packageline TO objects_package.
ENDLOOP.
PERFORM addobjectstonugget.
ENDFORM. " NUGGET_ADD_FROM_TRANSPORT