#作者：程宏斌
文章目录
心跳重连验证测试
测试方案
当我们进行测试时，按照以下步骤操作：
- 首先启动Fluent Bit，并记录在数据正常采集到Kafka后，Fluent Bit debug日志的内容。
- 停止Kafka服务后，发送日志并观察Fluent Bit debug日志的变化。特别注意观察在采集日志时是否有尝试请求Kafka服务。
- 再次启动Kafka服务，继续观察Fluent Bit debug日志的变化。注意检查之前存储的日志是否重新发送，并确认是否自动重新连接到Kafka。
- 这样的测试可以帮助我们验证Fluent Bit在Kafka服务可用性变化时的表现和自动处理能力。
测试日志汇总
-
下面是针对kafka断开重连日志汇总，详细的地方有#号开头的注解，请仔细阅读注解。
下面两个coro_id是正常的日志采集流程
[2024/06/13 11:31:58] [debug] in produce_message
[2024/06/13 11:31:58] [debug] [output:kafka:kafka.0] enqueued message (466 bytes) for topic 'testlog'
[2024/06/13 11:31:58] [debug] [out flush] cb_destroy coro_id=0
[2024/06/13 11:32:20] [debug] in produce_message
[2024/06/13 11:32:20] [debug] [output:kafka:kafka.0] enqueued message (466 bytes) for topic 'testlog'
[2024/06/13 11:32:20] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
[2024/06/13 11:32:20] [debug] [out flush] cb_destroy coro_id=1此处停止kafka服务，模拟kafka故障，会发现有明显的Disconnected关键字。此时开始fluent-bit针对kafka的自检代码开始运行。
[2024/06/13 11:32:47] [info] 192.168.123.50:9092/bootstrap: Disconnected (after 50404ms in state UP)
[2024/06/13 11:32:47] [info] 961ddde63cfb:9092/0: Disconnected (after 49401ms in state UP)
[2024/06/13 11:32:47] [error] 2/2 brokers are down
[2024/06/13 11:32:47] [error] Connect to ipv4#192.168.128.2:9092 failed: Connection refused
[2024/06/13 11:32:49] [error] Failed to resolve '961ddde63cfb:9092': Name or service not known
[2024/06/13 11:32:49] [warn] Metadata request failed: broker down: Local: Host resolution failure
[2024/06/13 11:32:49] [error] Connect to ipv4#192.168.123.50:9092 failed: Connection refused当Kafka服务发生故障时，Fluent Bit在采集日志后会自动尝试重新连接到Kafka。
[2024/06/13 11:33:18] [error] Connect to 192.168.123.50:9092 failed: Connection refused
[2024/06/13 11:33:24] [error] Failed to resolve '961ddde63cfb:9092'
[2024/06/13 11:34:02] [error] Failed to resolve '961ddde63cfb:9092'
[2024/06/13 11:34:18] [error] Connect to 192.168.123.50:9092 failed: Connection refused
[2024/06/13 11:34:21] [error] Connect to ipv4#192.168.128.2:9092 failed: Connection refused在启动 Kafka 后，之前未成功发送的历史消息将会随着下一批日志数据一同发送到 Kafka，并显示为 "message delivered"。
[2024/06/13 11:34:33] [debug] in produce_message
[2024/06/13 11:34:33] [debug] [output:kafka:kafka.0] enqueued message (466 bytes) for topic 'testlog'
[2024/06/13 11:34:33] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
[2024/06/13 11:34:33] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
[2024/06/13 11:34:33] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
[2024/06/13 11:34:33] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
[2024/06/13 11:34:45] [debug] [output:kafka:kafka.0] message delivered (466 bytes, partition 0)
测试总结
这里是针对上诉日志结果的一个总结：
在停止 Kafka 服务后，模拟 Kafka 故障会导致在日志中出现明显的 "Disconnected" 关键字。 fluent-bit 针对 Kafka 的自检代码开始运行。
当 Kafka 服务发生故障时，Fluent Bit 在采集日志后会自动尝试重新连接到 Kafka。在 Fluent Bit 的 debug 日志中，coro_id=6 表示第七条消息的发送（计数从 0 开始）。在前两条消息成功发送后，从第三到第七条每条日志都会触发一次 Kafka 请求。
在启动 Kafka 后，之前未成功发送的历史消息将会随着下一批日志数据一同发送到 Kafka，并显示为 "message delivered"。
代码详解
fluent-bit kafka reconnect逻辑：
代码位置: fluent-bit/lib/librdkafka-2.3.0/src
librdkafka本质上是一个状态机: state+op构成eventloop循环;
terminate
// ./lib/librdkafka-2.3.0/src/rdkafka_int.h
/**
* @returns true if \p rk handle is terminating.
* 判断rdkafka是否停止服务, 如果已经停止, 则eventloop不再循环
*/
#define rd_kafka_terminating(rk) \
(rd_atomic32_get(&(rk)->rk_terminate) & RD_KAFKA_DESTROY_F_TERMINATE)
// ./lib/librdkafka-2.3.0/src/rdkafka.c
// producer/consumer退出时, 设置关闭标记
static void rd_kafka_destroy_app(rd_kafka_t *rk, int flags) {
...
rd_atomic32_set(&rk->rk_terminate,
flags | RD_KAFKA_DESTROY_F_TERMINATE);
...
}connect
// ./lib/librdkafka-2.3.0/src/rdkafka_transport.c
// 管理连接的线程
// state == RD_KAFKA_BROKER_STATE_TRY_CONNECT时, 尝试进行连接
static int rd_kafka_broker_thread_main(void *arg) {
...
while (!rd_kafka_broker_terminating(rkb)) {
...
switch (rkb->rkb_state) {
...
case RD_KAFKA_BROKER_STATE_TRY_CONNECT:
...
/* Initiate asynchronous connection attempt.
* Only the host lookup is blocking here. */
r = rd_kafka_broker_connect(rkb);
...
/**
* Initiate asynchronous connection attempt.
* 初始化一个异步连接
* Locality: broker thread
*/
rd_kafka_transport_t *rd_kafka_transport_connect(rd_kafka_broker_t *rkb,
const rd_sockaddr_inx_t *sinx,
char *errstr,
size_t errstr_size) {
...
// 创建socket, 默认linux的socket函数
s = rkb->rkb_rk->rk_conf.socket_cb(sinx->in.sin_family, SOCK_STREAM,
IPPROTO_TCP,
rkb->rkb_rk->rk_conf.opaque);
...
/* Connect to broker */
if (rkb->rkb_rk->rk_conf.connect_cb) {
// 使用自定义的connect
rd_kafka_broker_lock(rkb); /* for rkb_nodename */
r = rkb->rkb_rk->rk_conf.connect_cb(
s, (struct sockaddr *)sinx, RD_SOCKADDR_INX_LEN(sinx),
rkb->rkb_nodename, rkb->rkb_rk->rk_conf.opaque);
rd_kafka_broker_unlock(rkb);
} else {
// 使用标准api的connect
if (connect(s, (struct sockaddr *)sinx,
RD_SOCKADDR_INX_LEN(sinx)) == RD_SOCKET_ERROR &&
(rd_socket_errno != EINPROGRESS
#ifdef _WIN32
&& rd_socket_errno != WSAEWOULDBLOCK
#endif
))
r = rd_socket_errno;
else
r = 0;
}
...
// ./lib/librdkafka-2.3.0/src/rdposix.h
/** @brief Last socket error */
#define rd_socket_errno errno
// ./lib/librdkafka-2.3.0/src/rdkafka_broker.c
/**
* @brief Initiate asynchronous connection attempt to the next address
* in the broker's address list.
* While the connect is asynchronous and its IO served in the
* CONNECT state, the initial name resolve is blocking.
*
* @returns -1 on error, 0 if broker does not have a hostname, or 1
* if the connection is now in progress.
*/
static int rd_kafka_broker_connect(rd_kafka_broker_t *rkb) {
...
if (*nodename) // 有name, 预先设置为连接成功状态
rd_kafka_broker_set_state(rkb, RD_KAFKA_BROKER_STATE_CONNECT);
...
// 设置/更新重连时间
rd_kafka_broker_update_reconnect_backoff(rkb, &rkb->rkb_rk->rk_conf,
rd_clock());
...
// 尝试连接
if (!(rkb->rkb_transport = rd_kafka_transport_connect(
rkb, sinx, errstr, sizeof(errstr)))) {
rd_kafka_broker_fail(rkb, LOG_ERR, RD_KAFKA_RESP_ERR__TRANSPORT,
"%s", errstr);
return -1;
}
rkb->rkb_ts_connect = rd_clock();
return 1;
}