20240605解决飞凌的OK3588-C的核心板刷机原厂buildroot不能连接ADB的问题
2024/6/5 13:53
rootroot@rootroot-ThinkBook-16-G5-IRH:~/repo_RK3588_Buildroot20240508$ ./build.sh --help
rootroot@rootroot-ThinkBook-16-G5-IRH:~/repo_RK3588_Buildroot20240508$ ./build.sh lunch
- rockchip_rk3588_evb7_v11_defconfig
Which would you like? 1: 3
rootroot@rootroot-ThinkBook-16-G5-IRH:~/repo_RK3588_Buildroot20240508$
rootroot@rootroot-ThinkBook-16-G5-IRH:~/repo_RK3588_Buildroot20240508$ ./build.sh
rootroot@rootroot-ThinkBook-16-G5-IRH:~/repo_RK3588_Buildroot20240508$
Z:\repo_RK3588_Buildroot20240508\kernel\arch\arm64\boot\dts\rockchip\rk3588-evb.dtsi
&usbdrd_dwc3_0 {
dr_mode = "otg";
status = "okay";
};
修改为：
&usbdp_phy1_u3 {
status = "okay";
};
&usbdrd3_0 {
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "peripheral";
status = "okay";
};
&usbhost3_0 {
status = "okay";
};
&usbhost_dwc3_0 {
status = "okay";
};
&usbdrd3_1 {
status = "okay";
};
&usbdrd_dwc3_1 {
status = "okay";
};
&vdpu {
status = "okay";
};
Z:\repo_RK3588_Buildroot20240508\kernel\arch\arm64\boot\dts\rockchip\rk3588-evb7-v11.dtsi
&usbdrd_dwc3_0 {
dr_mode = "otg";
usb-role-switch;
port {
#address-cells = <1>;
#size-cells = <0>;
dwc3_0_role_switch: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc0_role_sw>;
};
};
};
修改为：
&usbdp_phy1 {
rockchip,dp-lane-mux = <0 1 2 3>;
};
&usbdrd_dwc3_0 {
dr_mode = "peripheral";
usb-role-switch;
port {
#address-cells = <1>;
#size-cells = <0>;
dwc3_0_role_switch: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc0_role_sw>;
};
};
};
&usbhost3_0 {
status = "disabled";
};
&usbhost_dwc3_0 {
status = "disabled";
};
&work_led {
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&work_leds_gpio>;
};
