写入报文分析
text
//00 01 00 00 00 06 FF 05 00 01 FF 00 写单个线圈
//00 01 00 00 00 06 FF 06 00 05 00 23 写单个寄存器
//写多个寄存器
//00 06 00 00 00 0B FF 10 00 02 00 02 04 00 21 00 2A
//前7位相同，第八位功能码不同，九、十位写入地址，这是格式一样部分线圈基本都是单个写入，这里就使用05功能码
寄存器写入可能多个同时写入，如int32，float等，需要四个字节，则需要2个寄存器，并且数据的两个寄存器是连续的，，其他的如Int64，double，则需要4个寄存器，我们可以一起写入调高效率。
跟读报文一样，定义一个写入报文的头，前10个报文，再接收到写入数据是再在后面接上对应的数据字段
csharp
//读报文
byte[] _writebytes = new byte[]{0x00,0x01,0x00,0x00,0x00,0x06,0xFF,0x01,0x00,0x01};然后再初始化的时候修改从站地址
写入实现
增加写入功能码关系
csharp
public readonly Dictionary<string, byte> WriteFuncCodes = new Dictionary<string, byte>();
void Init()
{
//...
WriteFuncCodes.Add("Coil", 5);
WriteFuncCodes.Add("HoldingRegister", 16);
//...
}实现写入报文处理方法
定义一个写入方法WriteData用于写入报文发送和返回处理
csharp
/// <summary>
/// modbustcp写入方法
/// </summary>
/// <param name="point"></param>
private void WriteData(RegisterPoint point)
{
}然后再监控方法中，将等待周期拆分成10份，循环十次等待，每次查询写入队列是否有值，如果有就执行写入
csharp
/// <summary>
/// 启动主采集线程，循环采集
/// </summary>
public void DoMonitor()
{
Task.Run(() =>
{
//防止重复启动
if (IsMonitored)
return;
IsMonitored = true;
while (true)
{
//。。。。原逻辑
//循环10次间隔，如果写入队列不为空，则执行写入
for (int i = 0; i < 10; i++)
{
while (_writeQueue.Count > 0)
{
var point = _writeQueue.Dequeue();
WriteData(point);
}
Task.Delay(_timeSpan).Wait();
}
}
});
}
写入发送报文处理
修改相同格式的报文部分，功能码和地址
csharp
//修改功能码
_writebytes[7] = WriteFuncCodes[point.RegisterType];
//修改写入地址
var addressBytes = BitConverter.GetBytes(point.Address);
_writebytes[8] = addressBytes[1];
_writebytes[9] = addressBytes[0];然后再根据不同类型功能码处理数据部分
csharp
var writebuffer = _writebytes.ToList();
if (point.RegisterType == "Coil")
{
writebuffer[5] = 0x06;
if (point.WriteValue.Equals(true))
{
writebuffer.Add(0xFF);
}
else
{
writebuffer.Add(0x00);
}
writebuffer.Add(0x00);
}
else if (point.RegisterType == "HoldingRegister")
{
byte dataLen = (byte)(point.Length * 2);
writebuffer[5] = Convert.ToByte(7 + dataLen);
//修改读寄存器数量
var LengthBytes = BitConverter.GetBytes(point.Length);
writebuffer.Add(LengthBytes[1]);
writebuffer.Add(LengthBytes[0]);
//添加数据长度
writebuffer.Add(dataLen);
//转换成字节数组
var converterMothed = typeof(BitConverter).GetMethod(
"GetBytes",
BindingFlags.Public | BindingFlags.Static,
new[] { point.Type }
);
var valueBytes = (byte[])
converterMothed.Invoke(null, new object[] { point.WriteValue });
//转字节序
byte[] newbytes = new byte[point.Length * 2];
for (int i = 0; i < point.Length; i++)
{
newbytes[2 * i] = valueBytes[2 * i + 1];
newbytes[2 * i + 1] = valueBytes[2 * i];
}
writebuffer.AddRange(newbytes);
}处理完报文就执行发送接收操作
csharp
var client = _tcpClient.Client;
client.Send(writebuffer.ToArray());
//接收报文，正常接收说明写入成功
byte[] recvBytes = Recevice(12, 9);补充：
接收报文通信过程，跟读报文发送之后的接收报文操作基本一致，同样进行粘包处理，然后异常判断，所以将接收进行封装，只需要传入正常报文长度和异常报文长度，自行
csharp
byte[] Recevice(int receiveLen, int errLen)
{
//接收报文
byte[] recvBytes = new byte[receiveLen];
//报文总长
int recevTotalLength = 0;
while (recevTotalLength < receiveLen && recevTotalLength != errLen)
{
try
{
int needLength = receiveLen - recevTotalLength;
var recvLen = _client.Receive(
recvBytes,
recevTotalLength,
needLength,
SocketFlags.None
);
if (recvLen == 0)
{
throw new Exception("未接收到响应数据");
}
recevTotalLength += recvLen;
}
catch (Exception ex)
{
throw new Exception("接收响应数据异常!" + ex.Message);
}
}
if (recvBytes.Length == errLen)
{
throw new Exception("返回异常报文");
}
return recvBytes;
}响应报文分析
根据下面不同功能码响应报文可以看出，正常响应报文长度就是12，异常是9，所以前面接收传入的参数就是 Recevice(12, 9)
text
响应
00 01 00 00 00 06 FF 05 00 01 FF 00 -05
00 01 00 00 00 06 01 0F 00 05 00 0A -15
00 05 00 00 00 06 FF 06 00 05 00 23 -06
00 06 00 00 00 06 FF 10 00 02 00 02 -16
长度12
错误响应
00 01 00 00 00 03 01 8F 02
长度 9实现效果
完整代码
csharp
public class ModbusTcp
{
/// <summary>
/// 功能码映射关系
/// </summary>
public readonly Dictionary<string, byte> ReadFuncCodes = new Dictionary<string, byte>();
public readonly Dictionary<string, byte> WriteFuncCodes = new Dictionary<string, byte>();
//读报文
byte[] _readbytes = new byte[]
{
0x00,
0x01,
0x00,
0x00,
0x00,
0x06,
0xFF,
0x01,
0x00,
0x01,
0x00,
0x10
};
//写报文（前10位）
byte[] _writebytes = new byte[]
{
0x00,
0x01,
0x00,
0x00,
0x00,
0x06,
0xFF,
0x01,
0x00,
0x01,
};
private DeviceLink _link;
private List<RegisterPoint> _registers;
private TcpClient _tcpClient;
private int _timeSpan = 100; // 1000/10 ms 1s==1000ms,然后切成10个片段循环，插空进行写入
/// <summary>
/// 连接状态
/// </summary>
public bool IsConnected => _tcpClient != null && _tcpClient.Connected;
private bool IsMonitored = false;
public event Action<RegisterPoint, object> ValueUpdated;
/// <summary>
/// 写入队列
/// </summary>
private Queue<RegisterPoint> _writeQueue = new Queue<RegisterPoint>();
private Socket _client;
public ModbusTcp(DeviceLink link)
{
if (link == null)
{
throw new ArgumentNullException("传入配置为空，无法初始化");
}
_link = link;
_timeSpan = (int)(link.AcqTimeSpan * 100);
_registers = link.Points;
_tcpClient = new TcpClient();
Init();
}
void Init()
{
ReadFuncCodes.Add("Coil", 1);
ReadFuncCodes.Add("DiscreteInput", 2);
ReadFuncCodes.Add("HoldingRegister", 3);
ReadFuncCodes.Add("InputRegister", 4);
WriteFuncCodes.Add("Coil", 5);
WriteFuncCodes.Add("HoldingRegister", 16);
//修改从站地址
_readbytes[6] = Convert.ToByte(_link.SlaveID);
_writebytes[6] = Convert.ToByte(_link.SlaveID);
}
/// <summary>
/// 连接
/// </summary>
private void Connect()
{
try
{
_tcpClient.Connect(IPAddress.Parse(_link.Ip), _link.Port);
_client = _tcpClient.Client;
}
catch (Exception ex) { }
}
/// <summary>
/// 启动主采集线程，循环采集
/// </summary>
public void DoMonitor()
{
Task.Run(() =>
{
//防止重复启动
if (IsMonitored)
return;
IsMonitored = true;
while (true)
{
if (!_tcpClient.Connected)
{
Connect();
}
else
{
try
{
foreach (RegisterPoint point in _registers)
{
SetSendBytes(point);
//发送读报文
_client.Send(_readbytes);
int len = ReceviceDataLength(point.Length);
var errLen = 9;
var normalLen = 9 + len;
//接收报文
byte[] recvBytes = Recevice(normalLen, errLen);
//提取数据部分
byte[] dataBytes = new byte[len];
Array.Copy(recvBytes, 9, dataBytes, 0, len);
//数据处理
DealData(point, dataBytes);
}
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
//循环10次间隔，如果写入队列不为空，则执行写入
for (int i = 0; i < 10; i++)
{
while (_writeQueue.Count > 0)
{
var point = _writeQueue.Dequeue();
WriteData(point);
}
Task.Delay(_timeSpan).Wait();
}
}
});
}
/// <summary>
/// 返回报文数据长度
/// </summary>
/// <param name="pointLength"></param>
/// <returns></returns>
private int ReceviceDataLength(int pointLength)
{
int len;
if (_readbytes[7] <= 2)
{
len = pointLength / 8 + 1;
}
else
{
len = pointLength * 2;
}
return len;
}
/// <summary>
/// 设置查询发送报文
/// </summary>
/// <param name="point"></param>
private void SetSendBytes(RegisterPoint point)
{
//修改功能码
_readbytes[7] = ReadFuncCodes[point.RegisterType];
//修改起始地址
var addressBytes = BitConverter.GetBytes(point.Address);
_readbytes[8] = addressBytes[1];
_readbytes[9] = addressBytes[0];
//修改读寄存器数量
var LengthBytes = BitConverter.GetBytes(point.Length);
_readbytes[10] = LengthBytes[1];
_readbytes[11] = LengthBytes[0];
}
/// <summary>
/// 数据处理方法
/// </summary>
/// <param name="point"></param>
/// <param name="bytes"></param>
void DealData(RegisterPoint point, byte[] bytes)
{
//处理返回数据
var funcCode = ReadFuncCodes[point.RegisterType];
object value;
if (funcCode <= 2)
{
//单点查询，线圈只查询一个，byte中不等于0，就是true
value = bytes[0] != 0;
}
else
{
if (point.Type == typeof(byte))
{
value = bytes[1];
}
else
{
//字节序处理
byte[] newbytes = new byte[point.Length * 2];
//优化
for (int i = 0; i < point.Length; i++)
{
newbytes[2 * i] = bytes[2 * i + 1];
newbytes[2 * i + 1] = bytes[2 * i];
}
// 优化
var converterMothed = typeof(BitConverter).GetMethod(
"To" + point.Type.Name,
BindingFlags.Public | BindingFlags.Static,
new[] { typeof(byte[]), typeof(int) }
);
value = converterMothed.Invoke(null, new object[] { newbytes, 0 });
}
}
//赋值
if (!value.Equals(point.Value))
{
point.Value = value;
ValueUpdated?.Invoke(point, value);
}
}
/// <summary>
/// modbustcp写入方法
/// </summary>
/// <param name="point"></param>
private void WriteData(RegisterPoint point)
{
try
{
//00 01 00 00 00 06 FF 05 00 01 FF 00
//00 05 00 00 00 06 FF 06 00 05 00 23
//发送长度都一样，格式完全一样
//前7位相同，第八位功能码不同，九、十位写入地址
_writebytes[7] = WriteFuncCodes[point.RegisterType];
//修改写入地址
var addressBytes = BitConverter.GetBytes(point.Address);
_writebytes[8] = addressBytes[1];
_writebytes[9] = addressBytes[0];
var writebuffer = _writebytes.ToList();
if (point.RegisterType == "Coil")
{
writebuffer[5] = 0x06;
if (point.WriteValue.Equals(true))
{
writebuffer.Add(0xFF);
}
else
{
writebuffer.Add(0x00);
}
writebuffer.Add(0x00);
}
else if (point.RegisterType == "HoldingRegister")
{
byte dataLen = (byte)(point.Length * 2);
writebuffer[5] = Convert.ToByte(7 + dataLen);
//修改读寄存器数量
var LengthBytes = BitConverter.GetBytes(point.Length);
writebuffer.Add(LengthBytes[1]);
writebuffer.Add(LengthBytes[0]);
//添加数据长度
writebuffer.Add(dataLen);
//转换成字节数组
var converterMothed = typeof(BitConverter).GetMethod(
"GetBytes",
BindingFlags.Public | BindingFlags.Static,
new[] { point.Type }
);
var valueBytes = (byte[])
converterMothed.Invoke(null, new object[] { point.WriteValue });
//转字节序
byte[] newbytes = new byte[point.Length * 2];
for (int i = 0; i < point.Length; i++)
{
newbytes[2 * i] = valueBytes[2 * i + 1];
newbytes[2 * i + 1] = valueBytes[2 * i];
}
writebuffer.AddRange(newbytes);
}
var client = _tcpClient.Client;
client.Send(writebuffer.ToArray());
//接收报文，正常接收说明写入成功
byte[] recvBytes = Recevice(12, 9);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
//写入值先加入一个队列
public void Write(RegisterPoint point)
{
_writeQueue.Enqueue(point);
}
byte[] Recevice(int receiveLen, int errLen)
{
//接收报文
byte[] recvBytes = new byte[receiveLen];
//报文总长
int recevTotalLength = 0;
while (recevTotalLength < receiveLen && recevTotalLength != errLen)
{
try
{
int needLength = receiveLen - recevTotalLength;
var recvLen = _client.Receive(
recvBytes,
recevTotalLength,
needLength,
SocketFlags.None
);
if (recvLen == 0)
{
throw new Exception("未接收到响应数据");
}
recevTotalLength += recvLen;
}
catch (Exception ex)
{
throw new Exception("接收响应数据异常!" + ex.Message);
}
}
if (recvBytes.Length == errLen)
{
throw new Exception("返回异常报文");
}
return recvBytes;
}
}