20240823给飞凌OK3588-C的核心板刷Ubuntu22.04并成功启动
2024/8/23 20:37
给飞凌OK3588-C的核心板刷Ubuntu22.04，不管是预编译的，还是你自己直接编译的IMG固件。
放心，都会卡死在这里的！^_
[BEGIN] 2024/8/23 20:10:55
DDR V1.12 52218f4949 cym 23/07/06-19:46:50
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
CH0 RX Vref:29.3%, TX Vref:19.8%,19.8%
CH1 RX Vref:28.9%, TX Vref:20.8%,20.8%
CH2 RX Vref:29.3%, TX Vref:19.8%,19.8%
CH3 RX Vref:30.5%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 2
spl: mmc init failed with error: -123
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK
Checking uboot 0x00200000 ... sha256(662c2434f3...) + OK
Checking fdt 0x00325ad0 ... sha256(6c1121228f...) + OK
Checking atf-2 0xff100000 ... sha256(af08976afd...) + OK
Checking atf-3 0x000f0000 ... sha256(f202de33d9...) + OK
Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 176.835 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao
NOTICE: BL31: Built : 16:41:17, Jul 13 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 10 2023 - 10:46:41 +0800)
Model: Forlinx OK3588-C Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 8 GiB
Sysmem: init
Relocation Offset: edb51000
Relocation fdt: eb9fa7a8 - eb9fecd8
CR: M/C/I
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: None
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Auth Success!
normal mode
Writing to mmc(0)... done
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Forlinx OK3588 Board
download key pressed... entering download mode...
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x733c000
\DDR V1.12 52218f4949 cym 23/07/06-19:46:50
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
CH0 RX Vref:28.9%, TX Vref:20.8%,20.8%
CH1 RX Vref:28.5%, TX Vref:20.8%,21.8%
CH2 RX Vref:29.7%, TX Vref:20.8%,19.8%
CH3 RX Vref:30.5%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 2
spl: mmc init failed with error: -123
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK
Checking uboot 0x00200000 ... sha256(662c2434f3...) + OK
Checking fdt 0x00325ad0 ... sha256(6c1121228f...) + OK
Checking atf-2 0xff100000 ... sha256(af08976afd...) + OK
Checking atf-3 0x000f0000 ... sha256(f202de33d9...) + OK
Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 186.331 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao
NOTICE: BL31: Built : 16:41:17, Jul 13 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 10 2023 - 10:46:41 +0800)
Model: Forlinx OK3588-C Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 8 GiB
Sysmem: init
Relocation Offset: edb51000
Relocation fdt: eb9fa7a8 - eb9fecd8
CR: M/C/I
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Auth Success!
normal mode
Writing to mmc(0)... done
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Forlinx OK3588 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Monitor has basic audio support
can't find to match
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:148500,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init:No hdmiphypll clk1 found, use system clk
hdptx_ropll_cmn_config bus_width:0 rate:1485000
hdptx phy pll locked!
VOP VP0 enable Esmart0[400x300->400x300@760x390] fmt[1] addr[0xedf58000]
CEA mode used vic=17
mtmdsclock:1485000
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 786215 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
Net: eth0: ethernet@fe1b0000, eth1: ethernet@fe1c0000
Hit key to stop autoboot('Spacebar'): 0
ANDROID: reboot reason: "recovery"
No valid android hdr
Android image load failed
Android boot failed, error -1.
Booting FIT Image at 0xe7342380 with size 0x044b7400
Fdt Ramdisk skip relocation
Loading kernel from FIT Image at e7342380 ...
Using 'conf' configuration
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Verified-boot: 0
Trying 'kernel' kernel subimage
Description: unavailable
Type: Kernel Image
Compression: uncompressed
Data Start: 0xe7370780
Data Size: 33868288 Bytes = 32.3 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00400000
Entry Point: 0x00400000
Hash algo: sha256
Hash value: 856b2dd66bf8d497375a9cd197d78a36f397bdf5fbf82c4b83dab0032d39b488
Verifying Hash Integrity ... sha256+ OK
Loading ramdisk from FIT Image at e7342380 ...
Using 'conf' configuration
Trying 'ramdisk' ramdisk subimage
Description: unavailable
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0xe93bd180
Data Size: 37995896 Bytes = 36.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x0a200000
Entry Point: unavailable
Hash algo: sha256
Hash value: 5e769560034c269834f4c008182a15b25b904f609b2d203ed6fece545f528ad5
Verifying Hash Integrity ... sha256+ OK
Loading ramdisk from 0xe93bd180 to 0x0a200000
Loading fdt from FIT Image at e7342380 ...
Using 'conf' configuration
Trying 'fdt' fdt subimage
Description: unavailable
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0xe7342b80
Data Size: 187139 Bytes = 182.8 KiB
Architecture: AArch64
Load Address: 0x0a100000
Hash algo: sha256
Hash value: 6ac8ed6a3fef8ffd47e4682ec27cc0a426564c57394bc59014250f8bfcbaf929
Verifying Hash Integrity ... sha256+ OK
Loading fdt from 0x0a100000 to 0x0a100000
Booting using the fdt blob at 0x0a100000
Loading Kernel Image from 0xe7370780 to 0x00400000 ... OK
kernel loaded at 0x00400000, end = 0x0244ca00
'reserved-memory' dma-trans@3c000000: addr=3c000000 size=4000000
'reserved-memory' cma: addr=10000000 size=10000000
Using Device Tree in place at 000000000a100000, end 000000000a130b02
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)
Total: 2471.595 ms
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[ 65.797478] Kernel Offset: disabled
[ 65.797503] CPU features: 0x000,48040026,6a00aa18
[ 65.797514] Memory Limit: none
[END] 2024/8/23 20:18:40
就像Linux R4/Buildroot一样，需要修改DTS关闭PCIE30才能正常启动的！
Z:\ok3588c_ubuntu2204\OK3588_Linux_fs\kernel\arch\arm64\boot\dts\rockchip\OK3588-C-common.dtsi
&pcie30phy {
rockchip,pcie30-phymode = <PHY_MODE_PCIE_AGGREGATION>;
status = "disabled";
};
&pcie3x4 {
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
memory-region = <&dma_trans>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "disabled";
};
用户名：root
[BEGIN] 2024/8/23 20:26:18
DDR V1.12 52218f4949 cym 23/07/06-19:46:50
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
CH0 RX Vref:28.5%, TX Vref:20.8%,20.8%
CH1 RX Vref:28.5%, TX Vref:20.8%,21.8%
CH2 RX Vref:29.7%, TX Vref:19.8%,19.8%
CH3 RX Vref:31.0%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 2
spl: mmc init failed with error: -123
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK
Checking uboot 0x00200000 ... sha256(662c2434f3...) + OK
Checking fdt 0x00325ad0 ... sha256(6c1121228f...) + OK
Checking atf-2 0xff100000 ... sha256(af08976afd...) + OK
Checking atf-3 0x000f0000 ... sha256(f202de33d9...) + OK
Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 176.587 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao
NOTICE: BL31: Built : 16:41:17, Jul 13 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 10 2023 - 10:46:41 +0800)
Model: Forlinx OK3588-C Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 8 GiB
Sysmem: init
Relocation Offset: edb51000
Relocation fdt: eb9fa7a8 - eb9fecd8
CR: M/C/I
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Auth Success!
normal mode
Writing to mmc(0)... done
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Forlinx OK3588 Board
download key pressed... entering download mode...
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x733c000
\DDR V1.12 52218f4949 cym 23/07/06-19:46:50
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
CH0 RX Vref:28.5%, TX Vref:20.8%,20.8%
CH1 RX Vref:27.9%, TX Vref:20.8%,21.8%
CH2 RX Vref:29.7%, TX Vref:20.8%,19.8%
CH3 RX Vref:30.5%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 1
spl: mmc init failed with error: -123
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK
Checking uboot 0x00200000 ... sha256(662c2434f3...) + OK
Checking fdt 0x00325ad0 ... sha256(6c1121228f...) + OK
Checking atf-2 0xff100000 ... sha256(af08976afd...) + OK
Checking atf-3 0x000f0000 ... sha256(f202de33d9...) + OK
Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 186.385 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao
NOTICE: BL31: Built : 16:41:17, Jul 13 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 10 2023 - 10:46:41 +0800)
Model: Forlinx OK3588-C Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 8 GiB
Sysmem: init
Relocation Offset: edb51000
Relocation fdt: eb9fa7a8 - eb9fecd8
CR: M/C/I
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Auth Success!
normal mode
Writing to mmc(0)... done
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Forlinx OK3588 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Monitor has basic audio support
can't find to match
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:148500,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init:No hdmiphypll clk1 found, use system clk
hdptx_ropll_cmn_config bus_width:0 rate:1485000
hdptx phy pll locked!
VOP VP0 enable Esmart0[400x300->400x300@760x390] fmt[1] addr[0xedf58000]
CEA mode used vic=17
mtmdsclock:1485000
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 786215 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
Net: eth1: ethernet@fe1c0000
Hit key to stop autoboot('Spacebar'): 0
ANDROID: reboot reason: "recovery"
No valid android hdr
Android image load failed
Android boot failed, error -1.
Booting FIT Image at 0xe7342380 with size 0x044b7400
Fdt Ramdisk skip relocation
Loading kernel from FIT Image at e7342380 ...
Using 'conf' configuration
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Verified-boot: 0
Trying 'kernel' kernel subimage
Description: unavailable
Type: Kernel Image
Compression: uncompressed
Data Start: 0xe7370780
Data Size: 33868288 Bytes = 32.3 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00400000
Entry Point: 0x00400000
Hash algo: sha256
Hash value: 8f119bcaebe797657bdc3776e1fae3845dba6bc2fa5c4659eeec27db51d3a284
Verifying Hash Integrity ... sha256+ OK
Loading ramdisk from FIT Image at e7342380 ...
Using 'conf' configuration
Trying 'ramdisk' ramdisk subimage
Description: unavailable
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0xe93bd180
Data Size: 37995896 Bytes = 36.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x0a200000
Entry Point: unavailable
Hash algo: sha256
Hash value: 5e769560034c269834f4c008182a15b25b904f609b2d203ed6fece545f528ad5
Verifying Hash Integrity ... sha256+ OK
Loading ramdisk from 0xe93bd180 to 0x0a200000
Loading fdt from FIT Image at e7342380 ...
Using 'conf' configuration
Trying 'fdt' fdt subimage
Description: unavailable
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0xe7342b80
Data Size: 187163 Bytes = 182.8 KiB
Architecture: AArch64
Load Address: 0x0a100000
Hash algo: sha256
Hash value: 967a779bbec068ce7247b9f2982089b920662f69890ec9037094d8a4dcf379cd
Verifying Hash Integrity ... sha256+ OK
Loading fdt from 0x0a100000 to 0x0a100000
Booting using the fdt blob at 0x0a100000
Loading Kernel Image from 0xe7370780 to 0x00400000 ... OK
kernel loaded at 0x00400000, end = 0x0244ca00
'reserved-memory' dma-trans@3c000000: addr=3c000000 size=4000000
'reserved-memory' cma: addr=10000000 size=10000000
Using Device Tree in place at 000000000a100000, end 000000000a130b1a
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)
Total: 2465.375 ms
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
mount: mounting /dev/mmcblk1p1 on /mnt/sdcard failed: No such file or directory
mount: mounting PARTLABEL=oem on /oem failed: No such file or directory
mount: mounting PARTLABEL=userdata on /userdata failed: No such file or directory
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Populating /dev using udev: done
Saving random seed: OK
Starting network: OK
Debug: configfs_init
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/hid.usb0': No such file or directory
Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
input-event-daemon: Adding device: /dev/input/event0...
input-event-daemon: Adding device: /dev/input/event1...
input-event-daemon: Adding device: /dev/input/event2...
input-event-daemon: Start listening on 3 devices...
done
root@RK3588:/# [ 11.375972] reboot: Restarting system
DDR V1.12 52218f4949 cym 23/07/06-19:46:50
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
CH0 RX Vref:28.5%, TX Vref:20.8%,20.8%
CH1 RX Vref:28.5%, TX Vref:20.8%,21.8%
CH2 RX Vref:29.3%, TX Vref:20.8%,19.8%
CH3 RX Vref:30.5%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 2
spl: mmc init failed with error: -123
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(b40ce543bb...) + OK
Checking uboot 0x00200000 ... sha256(662c2434f3...) + OK
Checking fdt 0x00325ad0 ... sha256(6c1121228f...) + OK
Checking atf-2 0xff100000 ... sha256(af08976afd...) + OK
Checking atf-3 0x000f0000 ... sha256(f202de33d9...) + OK
Checking optee 0x08400000 ... sha256(6193f4aac7...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 176.647 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-616-gdc1125f48:finley.xiao
NOTICE: BL31: Built : 16:41:17, Jul 13 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-698-g7f1ea6d6e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #53 Wed Apr 19 14:30:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 10 2023 - 10:46:41 +0800)
Model: Forlinx OK3588-C Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 8 GiB
Sysmem: init
Relocation Offset: edb51000
Relocation fdt: eb9fa7a8 - eb9fecd8
CR: M/C/I
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Auth Success!
normal mode
*** Warning - bad CRC, using default environment
Writing to mmc(0)... done
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Forlinx OK3588 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Using display timing dts
dsi@fde20000: detailed mode clock 45000 kHz, flags[a]
H: 1024 1064 1112 1160
V: 0600 0640 0644 0692
bus_format: 100e
VOP update mode to: 1024x600p0, type: MIPI0 for VP2
rockchip_vop2_init:No hdmiphypll clk1 found, use system clk
VOP VP2 enable Esmart2[400x300->400x300@312x150] fmt[1] addr[0xedf58000]
final DSI-Link bandwidth: 293333 Kbps x 4
Using display timing dts
dsi@fde30000: detailed mode clock 45000 kHz, flags[a]
H: 1024 1064 1112 1160
V: 0600 0640 0644 0692
bus_format: 100e
VOP update mode to: 1024x600p0, type: MIPI1 for VP3
rockchip_vop2_init:No hdmiphypll clk1 found, use system clk
VOP VP3 enable Esmart3[400x300->400x300@312x150] fmt[1] addr[0xedf58000]
final DSI-Link bandwidth: 294113 Kbps x 4
Monitor has basic audio support
can't find to match
Could not find baseparameter partition
color_format:0
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x100a
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:148500,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init:No hdmiphypll clk1 found, use system clk
hdptx_ropll_cmn_config bus_width:0 rate:1485000
hdptx phy pll locked!
VOP VP0 enable Esmart0[400x300->400x300@760x390] fmt[1] addr[0xedf58000]
CEA mode used vic=17
mtmdsclock:1485000
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
dp@fde60000 disconnected
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 786215 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
Net: eth1: ethernet@fe1c0000
Writing to mmc(0)... done
Hit key to stop autoboot('Spacebar'): 0
ANDROID: reboot reason: "(none)"
No valid android hdr
Android image load failed
Android boot failed, error -1.
Booting FIT Image at 0xe977e980 with size 0x0207ae00
Fdt Ramdisk skip relocation
Loading kernel from FIT Image at e977e980 ...
Using 'conf' configuration
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Verified-boot: 0
Trying 'kernel' kernel subimage
Description: unavailable
Type: Kernel Image
Compression: uncompressed
Data Start: 0xe97acd80
Data Size: 33868288 Bytes = 32.3 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00400000
Entry Point: 0x00400000
Hash algo: sha256
Hash value: 8f119bcaebe797657bdc3776e1fae3845dba6bc2fa5c4659eeec27db51d3a284
Verifying Hash Integrity ... sha256+ OK
Loading fdt from FIT Image at e977e980 ...
Using 'conf' configuration
Trying 'fdt' fdt subimage
Description: unavailable
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0xe977f180
Data Size: 187163 Bytes = 182.8 KiB
Architecture: AArch64
Load Address: 0x0a100000
Hash algo: sha256
Hash value: 967a779bbec068ce7247b9f2982089b920662f69890ec9037094d8a4dcf379cd
Verifying Hash Integrity ... sha256+ OK
Loading fdt from 0x0a100000 to 0x0a100000
Booting using the fdt blob at 0x0a100000
Loading Kernel Image from 0xe97acd80 to 0x00400000 ... OK
kernel loaded at 0x00400000, end = 0x0244ca00
'reserved-memory' dma-trans@3c000000: addr=3c000000 size=4000000
'reserved-memory' cma: addr=10000000 size=10000000
Using Device Tree in place at 000000000a100000, end 000000000a130b1a
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)
Total: 2496.43 ms
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
Welcome to Ubuntu 22.04.3 LTS!
[ OK ] Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/serial-getty.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Forward Password R...uests to Wall Directory Watch.
[ OK ] Reached target User and Group Name Lookups.
[ OK ] Reached target Slice Units.
[ OK ] Reached target Mounting snaps.
[ OK ] Reached target Mounted snaps.
[ OK ] Reached target Swaps.
[ OK ] Reached target Local Verity Protected Volumes.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Listening on multipathd control socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting POSIX Message Queue File System...
Mounting /sys/kernel/debug...
Mounting Kernel Trace File System...
Starting Journal Service...
Starting Restore / save the current clock...
Starting Set the console keyboard layout...
Starting Monitoring of LVM...meventd or progress polling...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module efi_pstore...
Starting Load Kernel Module fuse...
Starting Enable Rockchip camera engine rkaiq...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted /sys/kernel/debug.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Restore / save the current clock.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module efi_pstore.
[ OK ] Finished Load Kernel Module fuse.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
Starting Device-Mapper Multipath Device Controller...
Starting Platform Persistent Storage Archival...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Started Enable Rockchip camera engine rkaiq.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Platform Persistent Storage Archival.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Set the console keyboard layout.
[ OK ] Finished Create Static Device Nodes in /dev.
Starting Rule-based Manage...for Device Events and Files...
[ OK ] Started Device-Mapper Multipath Device Controller.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Started Dispatch Password ...ts to Console Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Created slice Slice /system/systemd-backlight.
Starting Load/Save Screen ...of backlight:backlight-dsi0...
Starting Load/Save Screen ...of backlight:backlight-dsi1...
Starting Load/Save Screen ...of backlight:backlight-edp1...
[ OK ] Finished Load/Save Screen ...s of backlight:backlight-edp1.
[ OK ] Finished Load/Save Screen ...s of backlight:backlight-dsi1.
[ OK ] Finished Load/Save Screen ...s of backlight:backlight-dsi0.
[ OK ] Found device /dev/ttyFIQ0.
[ OK ] Found device /dev/disk/by-partlabel/userdata.
[ OK ] Found device /dev/disk/by-partlabel/oem.
Starting Enable Rockchip camera engine rkaiq...
[ OK ] Started Enable Rockchip camera engine rkaiq.
[ OK ] Listening on Load/Save RF ...itch Status /dev/rfkill Watch.
[ OK ] Finished Monitoring of LVM... dmeventd or progress polling.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /oem...
Mounting /tmp...
Mounting /userdata...
[ OK ] Mounted /tmp.
[ OK ] Mounted /oem.
[ OK ] Mounted /userdata.
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Create final runt...dir for shutdown pivot root...
Starting Raise network interfaces...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create final runt...e dir for shutdown pivot root.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Finished Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started CUPS Scheduler.
[ OK ] Started Start whoopsie on ...n of the /var/crash directory.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Path Units.
[ OK ] Reached target System Time Set.
[ OK ] Started Trigger anacron every hour.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Daily dpkg database backup timer.
[ OK ] Started Periodic ext4 Onli...ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Refresh fwupd metadata regularly.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Message of the Day.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on CUPS Scheduler.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Open-iSCSI iscsid Socket.
Starting Socket activation for snappy daemon...
Starting Filesystem resize...
[ OK ] Listening on Socket activation for snappy daemon.
[ OK ] Reached target Socket Units.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target Hardware activated USB gadget.
[ 10.144296] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal not lock, tmds_clk_ratio:0
[ 10.144313] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing mu_st:0x0, scdc_st:0x0, dma_st10:0x10
[* ] A start job is running for Filesystem resize (3s / 6min)
[** ] A start job is running for Filesystem resize (4s / 6min)
[*** ] A start job is running for Filesystem resize (4s / 6min)
[ *** ] A start job is running for Filesystem resize (5s / 6min)
[ *** ] A start job is running for Filesystem resize (6s / 6min)
[ ***] A start job is running for Filesystem resize (6s / 6min)
[ OK ] Finished Filesystem resize.
[ OK ] Reached target Basic System.
Starting Accounts Service...
Starting adbd Compatibility...
[ OK ] Started Run anacron jobs.
Starting Avahi mDNS/DNS-SD Stack...
Starting /etc/init.d/bluez_init Compatibility...
Starting Set CPU governor to performance...
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
[ OK ] Started Save initial kernel messages after boot.
Starting Remove Stale Onli...t4 Metadata Check Snapshots...
Starting Set GPU governor to performance...
Starting Initialize hardware monitoring sensors...
Starting Dispatcher daemon for systemd-networkd...
Starting Authorization Manager...
Starting Power Profiles daemon...
Starting System Logging Service...
Starting Set mali firmware based on kernel version...
[ OK ] Reached target Preparation for Logins.
Starting Snap Daemon...
Starting Switcheroo Control Proxy service...
Starting User Login Management...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Finished /etc/init.d/bluez_init Compatibility.
[ OK ] Finished Set GPU governor to performance.
[ OK ] Finished Initialize hardware monitoring sensors.
[ OK ] Finished Remove Stale Onli...ext4 Metadata Check Snapshots.
[ OK ] Finished Set CPU governor to performance.
[ OK ] Started System Logging Service.
[ OK ] Finished Set mali firmware based on kernel version.
[ OK ] Started User Login Management.
[ OK ] Started WPA supplicant.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Switcheroo Control Proxy service.
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
[ OK ] Started Download data for ...ailed at package install time.
[ OK ] Started Check to see wheth...w version of Ubuntu available.
[ OK ] Reached target Timer Units.
Starting Save/Restore Sound Card State...
Starting CUPS Scheduler...
[ OK ] Reached target Preparation for Remote File Systems.
[ OK ] Reached target Remote File Systems.
Starting LSB: Rockchip Auto Image Quality...
Starting LSB: automatic crash report generation...
[ OK ] Finished Availability of block devices.
[ OK ] Started Regular background program processing daemon.
Starting Tool to automatic...mit kernel crash signatures...
Starting OpenVPN service...
Starting Pollinate to seed...udo random number generator...
Starting /etc/rc.local Compatibility...
Starting Permit User Sessions...
Starting LSB: Start busybox udhcpd at boot time...
[ OK ] Started Unattended Upgrades Shutdown.
[ OK ] Started LSB: Rockchip Auto Image Quality.
[ OK ] Finished OpenVPN service.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Authorization Manager.
[ OK ] Started Power Profiles daemon.
[ OK ] Finished Save/Restore Sound Card State.
[ OK ] Reached target Sound Card.
Starting Modem Manager...
Starting GNOME Display Manager...
Starting Hold until boot process finishes up...
Starting Hostname Service...
[ OK ] Started LSB: automatic crash report generation.
[ OK ] Started LSB: Start busybox udhcpd at boot time.
[ OK ] Finished Hold until boot process finishes up.
[ OK ] Started Serial Getty on ttyFIQ0.
[ OK ] Reached target Login Prompts.
Starting Set console scheme...
[ OK ] Started Tool to automatica...ubmit kernel crash signatures.
[ OK ] Finished Set console scheme.
[ OK ] Created slice Slice /system/getty.
[ OK ] Started Accounts Service.
[ OK ] Started CUPS Scheduler.
[ OK ] Started Make remote CUPS printers available locally.
[ OK ] Started Disk Manager.
[ OK ] Started Hostname Service.
[ OK ] Started GNOME Display Manager.
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ OK ] Finished Pollinate to seed...seudo random number generator.
Starting OpenBSD Secure Shell server...
[ OK ] Started Modem Manager.
Starting Network Manager Script Dispatcher Service...
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started Snap Daemon.
Starting Wait until snapd is fully seeded...
[ OK ] Created slice User Slice of UID 1000.
Starting User Runtime Directory /run/user/1000...
[ OK ] Finished User Runtime Directory /run/user/1000.
Starting User Manager for UID 1000...
[ OK ] Started OpenBSD Secure Shell server.
Starting Time & Date Service...
[ OK ] Started Time & Date Service.
[ OK ] Started User Manager for UID 1000.
[ OK ] Started Session c1 of User forlinx.
Starting RealtimeKit Scheduling Policy Service...
[ OK ] Started RealtimeKit Scheduling Policy Service.
[ 14.860238] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
[ OK ] Started adbd Compatibility.
[ OK ] Started Session c2 of User forlinx.
Starting Bluetooth service...
[ OK ] Started Bluetooth service.
Starting Daemon for power management...
[ OK ] Started Daemon for power management.
Ubuntu 22.04.3 LTS ok3588 ttyFIQ0
ok3588 login: root
Welcome to Ubuntu 22.04.3 LTS (GNU/Linux 5.10.160 aarch64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
扩展安全维护（ESM）Applications 未启用。
0 更新可以立即应用。
启用 ESM Apps 来获取未来的额外安全更新
See https://ubuntu.com/esm or run: sudo pro status
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~# dmesg
[ 3.091370] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 3.091392] Linux version 5.10.160 (root@viewpro-ThinkBook-16-G5-IRH) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP Fri Aug 23 17:47:18 CST 2024
[ 3.105029] Machine model: Forlinx OK3588 Board
[ 3.105092] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[ 3.105103] printk: bootconsole [uart8250] enabled
[ 3.108174] efi: UEFI not found.
[ 3.115362] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[ 3.115412] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[ 3.115418] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[ 3.273057] Zone ranges:
[ 3.273065] DMA [mem 0x0000000000200000-0x00000000ffffffff]
[ 3.273075] DMA32 empty
[ 3.273082] Normal [mem 0x0000000100000000-0x00000002ffffffff]
[ 3.273089] Movable zone start for each node
[ 3.273093] Early memory node ranges
[ 3.273098] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 3.273104] node 0: [mem 0x0000000009400000-0x00000000efffffff]
[ 3.273111] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 3.273117] node 0: [mem 0x00000002f0000000-0x00000002ffffffff]
[ 3.273124] Initmem setup node 0 [mem 0x0000000000200000-0x00000002ffffffff]
[ 3.273131] On node 0 totalpages: 2092544
[ 3.273137] DMA zone: 15288 pages used for memmap
[ 3.273141] DMA zone: 0 pages reserved
[ 3.273146] DMA zone: 978432 pages, LIFO batch:63
[ 3.273152] Normal zone: 17408 pages used for memmap
[ 3.273156] Normal zone: 1114112 pages, LIFO batch:63
[ 3.323454] psci: probing for conduit method from DT.
[ 3.323464] psci: PSCIv1.1 detected in firmware.
[ 3.323468] psci: Using standard PSCI v0.2 function IDs
[ 3.323475] psci: Trusted OS migration not required
[ 3.323482] psci: SMC Calling Convention v1.2
[ 3.323888] percpu: Embedded 31 pages/cpu s88424 r8192 d30360 u126976
[ 3.323939] pcpu-alloc: s88424 r8192 d30360 u126976 alloc=31*4096
[ 3.323946] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 3.324106] Detected VIPT I-cache on CPU0
[ 3.324155] CPU features: detected: GIC system register CPU interface
[ 3.324160] CPU features: detected: Virtualization Host Extensions
[ 3.324170] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 3.324183] alternatives: patching kernel code
[ 3.324506] Built 1 zonelists, mobility grouping on. Total pages: 2059848
[ 3.324516] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[ 3.325678] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 3.326087] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 3.326094] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 3.332613] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[ 3.403003] Memory: 7779596K/8370176K available (16448K kernel code, 3442K rwdata, 6228K rodata, 6848K init, 556K bss, 328436K reserved, 262144K cma-reserved)
[ 3.403149] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 3.403183] ftrace: allocating 63263 entries in 248 pages
[ 3.510767] ftrace: allocated 248 pages with 5 groups
[ 3.511053] rcu: Hierarchical RCU implementation.
[ 3.511060] rcu: RCU event tracing is enabled.
[ 3.511065] Rude variant of Tasks RCU enabled.
[ 3.511068] Tracing variant of Tasks RCU enabled.
[ 3.511074] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 3.516563] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 3.519276] GICv3: GIC: Using split EOI/Deactivate mode
[ 3.519283] GICv3: 480 SPIs implemented
[ 3.519288] GICv3: 0 Extended SPIs implemented
[ 3.519317] GICv3: Distributor has no Range Selector support
[ 3.519327] GICv3: 16 PPIs implemented
[ 3.519372] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[ 3.519504] ITS [mem 0xfe640000-0xfe65ffff]
[ 3.519555] ITS@0x00000000fe640000: allocated 8192 Devices @100200000 (indirect, esz 8, psz 64K, shr 0)
[ 3.519582] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100210000 (flat, esz 2, psz 64K, shr 0)
[ 3.519591] ITS: using cache flushing for cmd queue
[ 3.519630] ITS [mem 0xfe660000-0xfe67ffff]
[ 3.519676] ITS@0x00000000fe660000: allocated 8192 Devices @100230000 (indirect, esz 8, psz 64K, shr 0)
[ 3.519702] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100240000 (flat, esz 2, psz 64K, shr 0)
[ 3.519710] ITS: using cache flushing for cmd queue
[ 3.519891] GICv3: using LPI property table @0x0000000100250000
[ 3.520016] GIC: using cache flushing for LPI property table
[ 3.520025] GICv3: CPU0: using allocated LPI pending table @0x0000000100260000
[ 3.662025] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 3.662034] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 3.662044] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 3.663339] Console: colour dummy device 80x25
[ 3.663369] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 3.663380] pid_max: default: 32768 minimum: 301
[ 3.663525] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.663551] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.665413] rcu: Hierarchical SRCU implementation.
[ 3.666378] Platform MSI: msi-controller@fe640000 domain created
[ 3.666398] Platform MSI: msi-controller@fe660000 domain created
[ 3.666764] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[ 3.666787] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[ 3.666939] EFI services will not be available.
[ 3.667340] smp: Bringing up secondary CPUs ...
[ 3.675676] Detected VIPT I-cache on CPU1
[ 3.675714] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[ 3.675732] GICv3: CPU1: using allocated LPI pending table @0x0000000100270000
[ 3.675777] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 3.684176] Detected VIPT I-cache on CPU2
[ 3.684206] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[ 3.684222] GICv3: CPU2: using allocated LPI pending table @0x0000000100280000
[ 3.684262] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 3.692642] Detected VIPT I-cache on CPU3
[ 3.692671] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[ 3.692687] GICv3: CPU3: using allocated LPI pending table @0x0000000100290000
[ 3.692726] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 3.701109] CPU features: detected: Spectre-v4
[ 3.701113] CPU features: detected: Spectre-BHB
[ 3.701115] Detected PIPT I-cache on CPU4
[ 3.701131] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[ 3.701140] GICv3: CPU4: using allocated LPI pending table @0x00000001002a0000
[ 3.701165] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[ 3.709501] Detected PIPT I-cache on CPU5
[ 3.709518] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[ 3.709528] GICv3: CPU5: using allocated LPI pending table @0x00000001002b0000
[ 3.709553] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[ 3.717901] Detected PIPT I-cache on CPU6
[ 3.717918] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[ 3.717927] GICv3: CPU6: using allocated LPI pending table @0x00000001002c0000
[ 3.717952] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[ 3.726275] Detected PIPT I-cache on CPU7
[ 3.726291] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[ 3.726301] GICv3: CPU7: using allocated LPI pending table @0x00000001002d0000
[ 3.726326] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[ 3.726397] smp: Brought up 1 node, 8 CPUs
[ 3.726417] SMP: Total of 8 processors activated.
[ 3.726423] CPU features: detected: Privileged Access Never
[ 3.726427] CPU features: detected: User Access Override
[ 3.726432] CPU features: detected: 32-bit EL0 Support
[ 3.726437] CPU features: detected: Common not Private translations
[ 3.726441] CPU features: detected: RAS Extension Support
[ 3.726446] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 3.726451] CPU features: detected: CRC32 instructions
[ 3.726455] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 3.726461] CPU features: detected: RCpc load-acquire (LDAPR)
[ 3.726537] CPU: All CPU(s) started at EL2
[ 3.727922] devtmpfs: initialized
[ 3.740717] Registered cp15_barrier emulation handler
[ 3.740725] Registered setend emulation handler
[ 3.740806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 3.740812] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 3.743710] pinctrl core: initialized pinctrl subsystem
[ 3.743851] regulator-dummy: no parameters, enabled
[ 3.743957] DMI not present or invalid.
[ 3.744164] NET: Registered protocol family 16
[ 3.745070] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 3.745174] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 3.745731] Registered FIQ tty driver
[ 3.745871] thermal_sys: Registered thermal governor 'fair_share'
[ 3.745874] thermal_sys: Registered thermal governor 'step_wise'
[ 3.745876] thermal_sys: Registered thermal governor 'user_space'
[ 3.745879] thermal_sys: Registered thermal governor 'power_allocator'
[ 3.746030] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 3.746063] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 3.746095] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[ 3.746127] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[ 3.746159] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[ 3.746190] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[ 3.746212] cpuidle: using governor menu
[ 3.746385] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 3.746506] ASID allocator initialised with 65536 entries
[ 3.747945] ramoops: dmesg-0 0x20000@0x0000000000110000
[ 3.747959] ramoops: console 0x80000@0x0000000000130000
[ 3.747971] ramoops: pmsg 0x50000@0x00000000001b0000
[ 3.748019] printk: console [ramoops-1] enabled
[ 3.748022] pstore: Registered ramoops as persistent store backend
[ 3.748024] ramoops: using 0xf0000@0x110000, ecc: 0
[ 3.799006] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[ 3.799276] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[ 3.799479] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[ 3.799735] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[ 3.799974] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[ 3.800004] rockchip-pinctrl pinctrl: probed pinctrl
[ 3.814305] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 3.814313] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ 3.814317] fiq_debugger_probe: could not install nmi irq handler
[ 3.814364] printk: console [ttyFIQ0] enabled
[ 3.814366] printk: bootconsole [uart8250] disabled
[ 3.814434] Registered fiq debugger ttyFIQ0
[ 3.814686] vcc12v_dcin: 12000 mV, enabled
[ 3.814764] reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
[ 3.814813] reg-fixed-voltage vcc4v0-sys: Looking up vin-supply from device tree
[ 3.814817] vcc4v0_sys: supplied by vcc12v_dcin
[ 3.814821] vcc12v_dcin: could not add device link regulator.2: -ENOENT
[ 3.814837] vcc4v0_sys: 4000 mV, enabled
[ 3.814898] reg-fixed-voltage vcc4v0-sys: vcc4v0_sys supplying 4000000uV
[ 3.814952] reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
[ 3.814956] vcc_1v1_nldo_s3: supplied by vcc4v0_sys
[ 3.814961] vcc4v0_sys: could not add device link regulator.3: -ENOENT
[ 3.814975] vcc_1v1_nldo_s3: 1100 mV, enabled
[ 3.815034] reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
[ 3.815078] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
[ 3.815082] vcc5v0_sys: supplied by vcc12v_dcin
[ 3.815085] vcc12v_dcin: could not add device link regulator.4: -ENOENT
[ 3.815099] vcc5v0_sys: 5000 mV, enabled
[ 3.815161] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[ 3.815304] vbus5v0_typec0: 5000 mV, disabled
[ 3.815358] reg-fixed-voltage vbus5v0-typec0: Looking up vin-supply from device tree
[ 3.815390] vbus5v0_typec0: supplied by vcc5v0_sys
[ 3.815425] reg-fixed-voltage vbus5v0-typec0: vbus5v0_typec0 supplying 5000000uV
[ 3.815498] vbus5v0_typec1: 5000 mV, disabled
[ 3.815547] reg-fixed-voltage vbus5v0-typec1: Looking up vin-supply from device tree
[ 3.815551] vbus5v0_typec1: supplied by vcc5v0_sys
[ 3.815578] reg-fixed-voltage vbus5v0-typec1: vbus5v0_typec1 supplying 5000000uV
[ 3.815626] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
[ 3.815630] vcc3v3_sys: supplied by vcc5v0_sys
[ 3.815634] vcc5v0_sys: could not add device link regulator.7: -ENOENT
[ 3.815653] vcc3v3_sys: 3300 mV, enabled
[ 3.815710] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[ 3.815754] reg-fixed-voltage vcc1v8-sys: Looking up vin-supply from device tree
[ 3.815758] vcc1v8_sys: supplied by vcc3v3_sys
[ 3.815761] vcc3v3_sys: could not add device link regulator.8: -ENOENT
[ 3.815776] vcc1v8_sys: 1800 mV, enabled
[ 3.815836] reg-fixed-voltage vcc1v8-sys: vcc1v8_sys supplying 1800000uV
[ 3.815880] reg-fixed-voltage vcc3v3_pcie30: Looking up vin-supply from device tree
[ 3.815884] vcc3v3_pcie30: supplied by vcc5v0_sys
[ 3.815887] vcc5v0_sys: could not add device link regulator.9: -ENOENT
[ 3.815901] vcc3v3_pcie30: 3300 mV, enabled
[ 3.815957] reg-fixed-voltage vcc3v3_pcie30: vcc3v3_pcie30 supplying 3300000uV
[ 3.816000] reg-fixed-voltage vcc3v3-pcie20: Looking up vin-supply from device tree
[ 3.816004] vcc3v3-pcie20: supplied by vcc5v0_sys
[ 3.816007] vcc5v0_sys: could not add device link regulator.10: -ENOENT
[ 3.816025] vcc3v3-pcie20: 3300 mV, enabled
[ 3.816085] reg-fixed-voltage vcc3v3-pcie20: vcc3v3-pcie20 supplying 3300000uV
[ 3.816136] reg-fixed-voltage vcc3v3-sdmmc: Looking up vin-supply from device tree
[ 3.816140] vcc3v3_sdmmc: supplied by vcc5v0_sys
[ 3.816144] vcc5v0_sys: could not add device link regulator.11: -ENOENT
[ 3.824666] vcc3v3_sdmmc: 3300 mV, enabled
[ 3.824737] reg-fixed-voltage vcc3v3-sdmmc: vcc3v3_sdmmc supplying 3300000uV
[ 3.824812] reg-fixed-voltage vcc-5g: Looking up vin-supply from device tree
[ 3.824817] vcc_5g_rst: supplied by vcc5v0_sys
[ 3.824820] vcc5v0_sys: could not add device link regulator.12: -ENOENT
[ 3.831341] vcc_5g_rst: 1800 mV, enabled
[ 3.831420] reg-fixed-voltage vcc-5g: vcc_5g_rst supplying 1800000uV
[ 3.831472] reg-fixed-voltage bt-wake: Looking up vin-supply from device tree
[ 3.831476] bt_wake: supplied by vcc5v0_sys
[ 3.831480] vcc5v0_sys: could not add device link regulator.13: -ENOENT
[ 3.831495] bt_wake: 1800 mV, enabled
[ 3.831554] reg-fixed-voltage bt-wake: bt_wake supplying 1800000uV
[ 3.831686] reg-fixed-voltage dsi0-en: Looking up vin-supply from device tree
[ 3.831691] dsi0_en: supplied by vcc5v0_sys
[ 3.831696] vcc5v0_sys: could not add device link regulator.14: -ENOENT
[ 3.831712] dsi0_en: 1800 mV, enabled
[ 3.831780] reg-fixed-voltage dsi0-en: dsi0_en supplying 1800000uV
[ 3.831851] reg-fixed-voltage dsi1-en: Looking up vin-supply from device tree
[ 3.831855] dsi1_en: supplied by vcc5v0_sys
[ 3.831858] vcc5v0_sys: could not add device link regulator.15: -ENOENT
[ 3.831874] dsi1_en: 1800 mV, enabled
[ 3.831939] reg-fixed-voltage dsi1-en: dsi1_en supplying 1800000uV
[ 3.832262] iommu: Default domain type: Translated
[ 3.832718] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
[ 3.832736] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.832993] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
[ 3.833007] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.833177] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
[ 3.833191] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.834430] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
[ 3.834445] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.834593] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
[ 3.834607] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.834704] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
[ 3.834718] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.834985] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
[ 3.835000] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.835273] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
[ 3.835287] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.835494] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply from device tree
[ 3.835508] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply property in node /power-management@fd8d8000/power-controller failed
[ 3.836215] SCSI subsystem initialized
[ 3.836230] libata version 3.00 loaded.
[ 3.836294] usbcore: registered new interface driver usbfs
[ 3.836308] usbcore: registered new interface driver hub
[ 3.836324] usbcore: registered new device driver usb
[ 3.836490] mc: Linux media interface: v0.10
[ 3.836500] videodev: Linux video capture interface: v2.00
[ 3.836527] pps_core: LinuxPPS API ver. 1 registered
[ 3.836530] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.836535] PTP clock support registered
[ 3.836804] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 3.836836] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 3.838285] Advanced Linux Sound Architecture Driver Initialized.
[ 3.838486] Bluetooth: Core ver 2.22
[ 3.838500] NET: Registered protocol family 31
[ 3.838502] Bluetooth: HCI device and connection manager initialized
[ 3.838506] Bluetooth: HCI socket layer initialized
[ 3.838511] Bluetooth: L2CAP socket layer initialized
[ 3.838517] Bluetooth: SCO socket layer initialized
[ 3.839777] rockchip-cpuinfo cpuinfo: SoC : 35881000
[ 3.839781] rockchip-cpuinfo cpuinfo: Serial : 13ef94500dc2e404
[ 3.840159] clocksource: Switched to clocksource arch_sys_counter
[ 4.136188] NET: Registered protocol family 2
[ 4.136305] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 4.138412] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 4.138541] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 4.138891] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 4.139647] TCP: Hash tables configured (established 65536 bind 65536)
[ 4.139700] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 4.139854] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 4.140066] NET: Registered protocol family 1
[ 4.140426] RPC: Registered named UNIX socket transport module.
[ 4.140429] RPC: Registered udp transport module.
[ 4.140431] RPC: Registered tcp transport module.
[ 4.140433] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.140877] PCI: CLS 0 bytes, default 64
[ 4.141864] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[ 4.142441] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[ 4.143302] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 4.146591] Initialise system trusted keyrings
[ 4.146693] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ 4.148953] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.149257] NFS: Registering the id_resolver key type
[ 4.149269] Key type id_resolver registered
[ 4.149272] Key type id_legacy registered
[ 4.149286] ntfs: driver 2.1.32 [Flags: R/O].
[ 4.149350] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 4.149448] fuse: init (API version 7.32)
[ 4.149601] SGI XFS with security attributes, no debug enabled
[ 4.171249] NET: Registered protocol family 38
[ 4.171254] Key type asymmetric registered
[ 4.171256] Asymmetric key parser 'x509' registered
[ 4.171271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 4.171274] io scheduler mq-deadline registered
[ 4.171276] io scheduler kyber registered
[ 4.171824] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[ 4.171947] rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
[ 4.172166] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[ 4.172521] rockchip-csi2-dphy csi2-dphy4: csi2 dphy4 probe successfully!
[ 4.172605] rockchip-csi2-dphy csi2-dphy5: csi2 dphy5 probe successfully!
[ 4.173970] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
[ 4.173978] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
[ 4.174022] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
[ 4.174028] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
[ 4.175334] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
[ 4.175341] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply property in node /syscon@fd5d8000/usb2-phy@8000/host-port failed
[ 4.176473] phy phy-fd5dc000.syscon:usb2-phy@c000.2: Looking up phy-supply from device tree
[ 4.176481] phy phy-fd5dc000.syscon:usb2-phy@c000.2: Looking up phy-supply property in node /syscon@fd5dc000/usb2-phy@c000/host-port failed
[ 4.177840] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up phy-supply from device tree
[ 4.177912] vcc5v0_sys: could not add device link phy-fd5d4000.syscon:usb2-phy@4000.3: -ENOENT
[ 4.177986] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply from device tree
[ 4.177992] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
[ 4.180119] phy phy-fee00000.phy.4: Looking up phy-supply from device tree
[ 4.180125] phy phy-fee00000.phy.4: Looking up phy-supply property in node /phy@fee00000 failed
[ 4.180284] phy phy-fee20000.phy.5: Looking up phy-supply from device tree
[ 4.180289] phy phy-fee20000.phy.5: Looking up phy-supply property in node /phy@fee20000 failed
[ 4.180486] phy phy-fee10000.phy.6: Looking up phy-supply from device tree
[ 4.180492] phy phy-fee10000.phy.6: Looking up phy-supply property in node /phy@fee10000 failed
[ 4.181062] phy phy-feda0000.phy.7: Looking up phy-supply from device tree
[ 4.181068] phy phy-feda0000.phy.7: Looking up phy-supply property in node /phy@feda0000 failed
[ 4.181193] phy phy-fedb0000.phy.8: Looking up phy-supply from device tree
[ 4.181198] phy phy-fedb0000.phy.8: Looking up phy-supply property in node /phy@fedb0000 failed
[ 4.181630] phy phy-fed60000.hdmiphy.9: Looking up phy-supply from device tree
[ 4.181635] phy phy-fed60000.hdmiphy.9: Looking up phy-supply property in node /hdmiphy@fed60000 failed
[ 4.182337] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[ 4.183383] phy phy-fed80000.phy.10: Looking up phy-supply from device tree
[ 4.183389] phy phy-fed80000.phy.10: Looking up phy-supply property in node /phy@fed80000/dp-port failed
[ 4.183423] phy phy-fed80000.phy.11: Looking up phy-supply from device tree
[ 4.183427] phy phy-fed80000.phy.11: Looking up phy-supply property in node /phy@fed80000/u3-port failed
[ 4.183737] phy phy-fed90000.phy.12: Looking up phy-supply from device tree
[ 4.183743] phy phy-fed90000.phy.12: Looking up phy-supply property in node /phy@fed90000/dp-port failed
[ 4.183777] phy phy-fed90000.phy.13: Looking up phy-supply from device tree
[ 4.183782] phy phy-fed90000.phy.13: Looking up phy-supply property in node /phy@fed90000/u3-port failed
[ 4.185464] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
[ 4.185472] rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree
[ 4.185487] rk-pcie fe190000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe190000 failed
[ 4.185495] rk-pcie fe190000.pcie: no vpcie3v3 regulator found
[ 4.185661] rk-pcie fe190000.pcie: IRQ msi not found
[ 4.185664] rk-pcie fe190000.pcie: use outband MSI support
[ 4.185667] rk-pcie fe190000.pcie: Missing *config* reg space
[ 4.185673] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
[ 4.185702] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000
[ 4.185722] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[ 4.185736] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[ 4.185744] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
[ 4.185746] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[ 4.185757] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
[ 4.185781] rk-pcie fe190000.pcie: Missing *config* reg space
[ 4.185805] rk-pcie fe190000.pcie: invalid resource
[ 4.185969] pwm-backlight backlight-dsi0: Looking up power-supply from device tree
[ 4.185976] pwm-backlight backlight-dsi0: Looking up power-supply property in node /backlight-dsi0 failed
[ 4.185983] pwm-backlight backlight-dsi0: supply power not found, using dummy regulator
[ 4.186020] rk-pcie fe170000.pcie: IRQ msi not found
[ 4.186023] rk-pcie fe170000.pcie: use outband MSI support
[ 4.186026] rk-pcie fe170000.pcie: Missing *config* reg space
[ 4.186032] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[ 4.186080] rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[ 4.186087] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[ 4.186094] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[ 4.186099] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[ 4.186122] rk-pcie fe170000.pcie: Missing *config* reg space
[ 4.186146] rk-pcie fe170000.pcie: invalid resource
[ 4.186180] pwm-backlight backlight-dsi1: Looking up power-supply from device tree
[ 4.186186] pwm-backlight backlight-dsi1: Looking up power-supply property in node /backlight-dsi1 failed
[ 4.186191] pwm-backlight backlight-dsi1: supply power not found, using dummy regulator
[ 4.186341] pwm-backlight backlight-edp1: Looking up power-supply from device tree
[ 4.186346] pwm-backlight backlight-edp1: Looking up power-supply property in node /backlight-edp1 failed
[ 4.186351] pwm-backlight backlight-edp1: supply power not found, using dummy regulator
[ 4.186510] mpp_service mpp-srv: unknown mpp version for missing VCS info
[ 4.186514] mpp_service mpp-srv: probe start
[ 4.188603] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[ 4.188811] mpp_vdpu2 fdb50400.vdpu: probe device
[ 4.188920] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[ 4.188927] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[ 4.189055] mpp_vdpu2 fdb50400.vdpu: probing finish
[ 4.189307] mpp_vepu2 jpege-ccu: probing start
[ 4.189311] mpp_vepu2 jpege-ccu: probing finish
[ 4.189457] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[ 4.189594] mpp_vepu2 fdba0000.jpege-core: probing start
[ 4.189708] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[ 4.189838] mpp_vepu2 fdba0000.jpege-core: probing finish
[ 4.189946] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[ 4.190086] mpp_vepu2 fdba4000.jpege-core: probing start
[ 4.190205] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[ 4.190336] mpp_vepu2 fdba4000.jpege-core: probing finish
[ 4.190432] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[ 4.190571] mpp_vepu2 fdba8000.jpege-core: probing start
[ 4.190679] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[ 4.190803] mpp_vepu2 fdba8000.jpege-core: probing finish
[ 4.190897] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[ 4.191036] mpp_vepu2 fdbac000.jpege-core: probing start
[ 4.191139] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[ 4.191264] mpp_vepu2 fdbac000.jpege-core: probing finish
[ 4.191619] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[ 4.191763] mpp-iep2 fdbb0000.iep: probe device
[ 4.191887] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 4.192010] mpp-iep2 fdbb0000.iep: probing finish
[ 4.192246] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[ 4.192459] mpp_jpgdec fdb90000.jpegd: probe device
[ 4.192699] mpp_jpgdec fdb90000.jpegd: probing finish
[ 4.193098] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[ 4.193156] mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
[ 4.193159] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[ 4.193253] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[ 4.193516] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[ 4.193641] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 4.193644] rkvdec2_init:1022: No niu aclk reset resource define
[ 4.193647] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 4.193649] rkvdec2_init:1025: No niu hclk reset resource define
[ 4.193665] mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
[ 4.193670] mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
[ 4.193678] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[ 4.193738] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[ 4.193740] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[ 4.193890] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[ 4.193893] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[ 4.193896] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[ 4.193898] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[ 4.193902] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[ 4.193906] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
[ 4.193909] mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
[ 4.193911] mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
[ 4.193914] mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
[ 4.193916] mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
[ 4.193919] mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
[ 4.193921] mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
[ 4.193924] mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
[ 4.193926] mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
[ 4.193929] mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
[ 4.193932] mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
[ 4.193960] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[ 4.194046] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[ 4.194266] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[ 4.194384] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 4.194387] rkvdec2_init:1022: No niu aclk reset resource define
[ 4.194390] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 4.194393] rkvdec2_init:1025: No niu hclk reset resource define
[ 4.194406] mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
[ 4.194411] mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
[ 4.194418] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[ 4.194460] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[ 4.194476] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[ 4.194656] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[ 4.194659] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[ 4.194662] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[ 4.194664] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[ 4.194668] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[ 4.194672] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
[ 4.194674] mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
[ 4.194677] mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
[ 4.194680] mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
[ 4.194683] mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
[ 4.194685] mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
[ 4.194688] mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
[ 4.194690] mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
[ 4.194693] mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
[ 4.194695] mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
[ 4.194698] mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
[ 4.194727] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[ 4.194973] mpp_rkvenc2 rkvenc-ccu: probing start
[ 4.194977] mpp_rkvenc2 rkvenc-ccu: probing finish
[ 4.195108] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[ 4.195267] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[ 4.195412] mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply from device tree
[ 4.195418] mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbd0000 failed
[ 4.195425] mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
[ 4.195441] rkvenc_init:1859: failed to add venc devfreq
[ 4.195469] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[ 4.195602] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[ 4.195682] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[ 4.195847] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[ 4.195971] mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply from device tree
[ 4.195976] mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbe0000 failed
[ 4.195983] mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
[ 4.195994] rkvenc_init:1859: failed to add venc devfreq
[ 4.196043] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[ 4.196174] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[ 4.196467] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
[ 4.196484] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
[ 4.196782] mpp_av1dec: Adding child /av1d@fdc70000
[ 4.197038] mpp_av1dec: register device av1d-master
[ 4.197056] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[ 4.197076] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[ 4.197083] mpp_av1dec av1d-master: Adding to iommu group 17
[ 4.197311] mpp_av1dec av1d-master: probing start
[ 4.197575] mpp_av1dec av1d-master: probing finish
[ 4.197611] mpp_service mpp-srv: probe success
[ 4.207809] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 4.207815] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 4.208742] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 4.208748] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 4.209688] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 4.209693] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 4.210268] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[ 4.210335] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[ 4.210392] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[ 4.210445] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[ 4.210499] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[ 4.211332] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 4.212209] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 4.212727] feb70000.serial: ttyS4 at MMIO 0xfeb70000 (irq = 105, base_baud = 1500000) is a 16550A
[ 4.213117] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 106, base_baud = 1500000) is a 16550A
[ 4.213402] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 107, base_baud = 1500000) is a 16550A
[ 4.214929] random: crng init done
[ 4.215990] rockchip-vop2 fdd90000.vop: Adding to iommu group 16
[ 4.227091] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[ 4.227099] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[ 4.227105] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[ 4.227111] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[ 4.227353] [drm] failed to init overlay plane Cluster0-win1
[ 4.227386] [drm] failed to init overlay plane Cluster1-win1
[ 4.227417] [drm] failed to init overlay plane Cluster2-win1
[ 4.227448] [drm] failed to init overlay plane Cluster3-win1
[ 4.238703] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc009124550)
[ 4.239258] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[ 4.239720] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0091327d8)
[ 4.239773] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[ 4.246145] panel-simple edp1-panel: Looking up power-supply from device tree
[ 4.246154] panel-simple edp1-panel: Looking up power-supply property in node /edp1-panel failed
[ 4.246167] panel-simple edp1-panel: supply power not found, using dummy regulator
[ 4.246599] panel-simple-dsi fde20000.dsi.0: Looking up power-supply from device tree
[ 4.246609] panel-simple-dsi fde20000.dsi.0: Looking up power-supply property in node /dsi@fde20000/panel@0 failed
[ 4.246616] panel-simple-dsi fde20000.dsi.0: supply power not found, using dummy regulator
[ 4.246808] panel-simple-dsi fde30000.dsi.0: Looking up power-supply from device tree
[ 4.246817] panel-simple-dsi fde30000.dsi.0: Looking up power-supply property in node /dsi@fde30000/panel@0 failed
[ 4.246834] panel-simple-dsi fde30000.dsi.0: supply power not found, using dummy regulator
[ 4.249835] brd: module loaded
[ 4.253041] loop: module loaded
[ 4.253230] zram: Added device: zram0
[ 4.253380] lkdtm: No crash points registered, enable through debugfs
[ 4.253543] system_heap: orders[0] = 6
[ 4.253546] system_heap: orders[1] = 4
[ 4.253548] system_heap: orders[2] = 0
[ 4.255980] rockchip-spi feb20000.spi: no high_speed pinctrl state
[ 4.257339] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[ 4.257480] rk806 spi2.0: ON: 0x40 OFF:0x0
[ 4.259558] rk806-regulator rk806-regulator.3.auto: Looking up vcc1-supply from device tree
[ 4.259628] vdd_gpu_s0: supplied by vcc5v0_sys
[ 4.259634] vcc5v0_sys: could not add device link regulator.16: -ENOENT
[ 4.260383] vdd_gpu_s0: 550 <--> 950 mV at 750 mV, enabled
[ 4.260738] rk806-regulator rk806-regulator.3.auto: Looking up vcc2-supply from device tree
[ 4.260745] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[ 4.260750] vcc5v0_sys: could not add device link regulator.17: -ENOENT
[ 4.260967] vdd_cpu_lit_s0: 550 <--> 950 mV at 750 mV, enabled
[ 4.261510] rk806-regulator rk806-regulator.3.auto: Looking up vcc3-supply from device tree
[ 4.261516] vdd_log_s0: supplied by vcc5v0_sys
[ 4.261521] vcc5v0_sys: could not add device link regulator.18: -ENOENT
[ 4.261775] vdd_log_s0: 675 <--> 750 mV at 750 mV, enabled
[ 4.262175] rk806-regulator rk806-regulator.3.auto: Looking up vcc4-supply from device tree
[ 4.262181] vdd_vdenc_s0: supplied by vcc5v0_sys
[ 4.262185] vcc5v0_sys: could not add device link regulator.19: -ENOENT
[ 4.262432] vdd_vdenc_s0: 550 <--> 950 mV at 750 mV, enabled
[ 4.262900] rk806-regulator rk806-regulator.3.auto: Looking up vcc5-supply from device tree
[ 4.262906] vdd_ddr_s0: supplied by vcc5v0_sys
[ 4.262910] vcc5v0_sys: could not add device link regulator.20: -ENOENT
[ 4.263157] vdd_ddr_s0: 675 <--> 900 mV at 850 mV, enabled
[ 4.263352] rk806-regulator rk806-regulator.3.auto: Looking up vcc6-supply from device tree
[ 4.263358] vdd2_ddr_s3: supplied by vcc5v0_sys
[ 4.263362] vcc5v0_sys: could not add device link regulator.21: -ENOENT
[ 4.263698] vdd2_ddr_s3: at 500 mV, enabled
[ 4.263971] vdd_2v0_pldo_s3: Bringing 2025000uV into 2000000-2000000uV
[ 4.264141] vdd_2v0_pldo_s3: ramp_delay not set
[ 4.264232] rk806-regulator rk806-regulator.3.auto: Looking up vcc7-supply from device tree
[ 4.264238] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[ 4.264243] vcc5v0_sys: could not add device link regulator.22: -ENOENT
[ 4.264496] vdd_2v0_pldo_s3: 2000 mV, enabled
[ 4.264775] vcc_3v3_s3: Bringing 3325000uV into 3300000-3300000uV
[ 4.264940] vcc_3v3_s3: ramp_delay not set
[ 4.265032] rk806-regulator rk806-regulator.3.auto: Looking up vcc8-supply from device tree
[ 4.265037] vcc_3v3_s3: supplied by vcc5v0_sys
[ 4.265042] vcc5v0_sys: could not add device link regulator.23: -ENOENT
[ 4.265297] vcc_3v3_s3: 3300 mV, enabled
[ 4.265629] rk806-regulator rk806-regulator.3.auto: Looking up vcc9-supply from device tree
[ 4.265635] vddq_ddr_s0: supplied by vcc5v0_sys
[ 4.265639] vcc5v0_sys: could not add device link regulator.24: -ENOENT
[ 4.265951] vddq_ddr_s0: at 500 mV, enabled
[ 4.266231] vcc_1v8_s3: Bringing 1825000uV into 1800000-1800000uV
[ 4.266395] vcc_1v8_s3: ramp_delay not set
[ 4.266487] rk806-regulator rk806-regulator.3.auto: Looking up vcc10-supply from device tree
[ 4.266493] vcc_1v8_s3: supplied by vcc5v0_sys
[ 4.266497] vcc5v0_sys: could not add device link regulator.25: -ENOENT
[ 4.266750] vcc_1v8_s3: 1800 mV, enabled
[ 4.267125] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[ 4.267186] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[ 4.267191] vcc_1v1_nldo_s3: could not add device link regulator.26: -ENOENT
[ 4.267449] vdd_0v75_s3: 750 mV, enabled
[ 4.267871] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[ 4.267877] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[ 4.267882] vcc_1v1_nldo_s3: could not add device link regulator.27: -ENOENT
[ 4.268133] vdd_ddr_pll_s0: 850 mV, enabled
[ 4.268472] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[ 4.268478] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 4.268482] vcc_1v1_nldo_s3: could not add device link regulator.28: -ENOENT
[ 4.268739] avdd_0v75_s0: 837 mV, enabled
[ 4.269079] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
[ 4.269084] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[ 4.269089] vcc_1v1_nldo_s3: could not add device link regulator.29: -ENOENT
[ 4.269341] vdd_0v85_s0: 850 mV, enabled
[ 4.269683] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
[ 4.269689] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 4.269693] vcc_1v1_nldo_s3: could not add device link regulator.30: -ENOENT
[ 4.269944] vdd_0v75_s0: 750 mV, enabled
[ 4.270367] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[ 4.270409] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 4.270414] vdd_2v0_pldo_s3: could not add device link regulator.31: -ENOENT
[ 4.270740] avcc_1v8_s0: 1800 mV, enabled
[ 4.271153] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[ 4.271161] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 4.271166] vdd_2v0_pldo_s3: could not add device link regulator.32: -ENOENT
[ 4.271495] vcc_1v8_s0: 1800 mV, enabled
[ 4.271834] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[ 4.271843] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[ 4.271847] vdd_2v0_pldo_s3: could not add device link regulator.33: -ENOENT
[ 4.272169] avdd_1v2_s0: 1200 mV, enabled
[ 4.272510] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
[ 4.272516] vcc_3v3_s0: supplied by vcc5v0_sys
[ 4.272520] vcc5v0_sys: could not add device link regulator.34: -ENOENT
[ 4.272771] vcc_3v3_s0: 3300 mV, enabled
[ 4.273118] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
[ 4.273124] vccio_sd_s0: supplied by vcc5v0_sys
[ 4.273128] vcc5v0_sys: could not add device link regulator.35: -ENOENT
[ 4.273353] vccio_sd_s0: 1800 <--> 3300 mV at 3300 mV, enabled
[ 4.273714] rk806-regulator rk806-regulator.3.auto: Looking up vcca-supply from device tree
[ 4.273720] pldo6_s3: supplied by vcc5v0_sys
[ 4.273725] vcc5v0_sys: could not add device link regulator.36: -ENOENT
[ 4.273946] pldo6_s3: 1800 mV, enabled
[ 4.274213] rk806 spi2.0: no sleep-setting state
[ 4.274217] rk806 spi2.0: no reset-setting pinctrl state
[ 4.274220] rk806 spi2.0: no dvs-setting pinctrl state
[ 4.275595] rockchip-spi feb20000.spi: probed, poll=0, rsd=0
[ 4.276646] CAN device driver interface
[ 4.278190] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.278193] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.278952] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[ 4.279088] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree
[ 4.279099] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed
[ 4.279115] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
[ 4.279120] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[ 4.279125] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x44).
[ 4.279129] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[ 4.279132] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[ 4.279140] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[ 4.279145] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[ 4.279149] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[ 4.279162] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[ 4.279381] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[ 4.279533] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 4.279538] rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5
[ 4.279542] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[ 4.279545] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[ 4.279549] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[ 4.279552] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[ 4.279586] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[ 4.279589] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 4.279594] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[ 4.279597] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[ 4.279601] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[ 4.391278] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.391283] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.412224] PPP generic driver version 2.4.2
[ 4.412300] PPP BSD Compression module registered
[ 4.412303] PPP Deflate Compression module registered
[ 4.412314] PPP MPPE Compression module registered
[ 4.412318] NET: Registered protocol family 24
[ 4.412352] usbcore: registered new interface driver catc
[ 4.412366] usbcore: registered new interface driver kaweth
[ 4.412369] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 4.412386] usbcore: registered new interface driver pegasus
[ 4.412400] usbcore: registered new interface driver rtl8150
[ 4.412418] usbcore: registered new interface driver r8152
[ 4.412435] usbcore: registered new interface driver asix
[ 4.412452] usbcore: registered new interface driver ax88179_178a
[ 4.412466] usbcore: registered new interface driver cdc_ether
[ 4.412480] usbcore: registered new interface driver cdc_eem
[ 4.412494] usbcore: registered new interface driver net1080
[ 4.412508] usbcore: registered new interface driver cdc_subset
[ 4.412523] usbcore: registered new interface driver zaurus
[ 4.412539] usbcore: registered new interface driver ipheth
[ 4.412557] usbcore: registered new interface driver cdc_ncm
[ 4.412572] usbcore: registered new interface driver cdc_mbim
[ 4.412579] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.2.14
[ 4.412598] usbcore: registered new interface driver GobiNet
[ 4.416834] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.416836] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.427514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.427522] ehci-pci: EHCI PCI platform driver
[ 4.427547] ehci-platform: EHCI generic platform driver
[ 4.429769] ehci-platform fc800000.usb: EHCI Host Controller
[ 4.429848] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[ 4.429909] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[ 4.440174] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[ 4.440268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.440273] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.440276] usb usb1: Product: EHCI Host Controller
[ 4.440279] usb usb1: Manufacturer: Linux 5.10.160 ehci_hcd
[ 4.440283] usb usb1: SerialNumber: fc800000.usb
[ 4.440505] hub 1-0:1.0: USB hub found
[ 4.440520] hub 1-0:1.0: 1 port detected
[ 4.442903] ehci-platform fc880000.usb: EHCI Host Controller
[ 4.442986] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[ 4.443040] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[ 4.443499] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.443501] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.453508] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[ 4.453590] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.453595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.453598] usb usb2: Product: EHCI Host Controller
[ 4.453601] usb usb2: Manufacturer: Linux 5.10.160 ehci_hcd
[ 4.453604] usb usb2: SerialNumber: fc880000.usb
[ 4.453805] hub 2-0:1.0: USB hub found
[ 4.453821] hub 2-0:1.0: 1 port detected
[ 4.454267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.454276] ohci-platform: OHCI generic platform driver
[ 4.454437] ohci-platform fc840000.usb: Generic Platform OHCI controller
[ 4.454515] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[ 4.454565] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[ 4.470166] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.470168] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.496832] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.496834] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.514252] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 4.514257] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.514260] usb usb3: Product: Generic Platform OHCI controller
[ 4.514263] usb usb3: Manufacturer: Linux 5.10.160 ohci_hcd
[ 4.514267] usb usb3: SerialNumber: fc840000.usb
[ 4.514469] hub 3-0:1.0: USB hub found
[ 4.514484] hub 3-0:1.0: 1 port detected
[ 4.514769] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[ 4.514848] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[ 4.514894] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[ 4.574254] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 4.574259] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.574262] usb usb4: Product: Generic Platform OHCI controller
[ 4.574265] usb usb4: Manufacturer: Linux 5.10.160 ohci_hcd
[ 4.574268] usb usb4: SerialNumber: fc8c0000.usb
[ 4.574473] hub 4-0:1.0: USB hub found
[ 4.574489] hub 4-0:1.0: 1 port detected
[ 4.575143] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 4.575222] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
[ 4.575297] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
[ 4.575320] xhci-hcd xhci-hcd.4.auto: irq 145, io mem 0xfcd00000
[ 4.575457] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.575461] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.575464] usb usb5: Product: xHCI Host Controller
[ 4.575467] usb usb5: Manufacturer: Linux 5.10.160 xhci-hcd
[ 4.575471] usb usb5: SerialNumber: xhci-hcd.4.auto
[ 4.575668] hub 5-0:1.0: USB hub found
[ 4.575683] hub 5-0:1.0: 1 port detected
[ 4.575826] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 4.575895] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
[ 4.575902] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[ 4.575934] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.575988] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 4.575992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.575995] usb usb6: Product: xHCI Host Controller
[ 4.575998] usb usb6: Manufacturer: Linux 5.10.160 xhci-hcd
[ 4.576001] usb usb6: SerialNumber: xhci-hcd.4.auto
[ 4.576196] hub 6-0:1.0: USB hub found
[ 4.576210] hub 6-0:1.0: 1 port detected
[ 4.576439] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[ 4.576446] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 4.576524] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
[ 4.576611] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
[ 4.576632] xhci-hcd xhci-hcd.5.auto: irq 146, io mem 0xfc400000
[ 4.576768] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.576773] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.576776] usb usb7: Product: xHCI Host Controller
[ 4.576779] usb usb7: Manufacturer: Linux 5.10.160 xhci-hcd
[ 4.576782] usb usb7: SerialNumber: xhci-hcd.5.auto
[ 4.576989] hub 7-0:1.0: USB hub found
[ 4.577006] hub 7-0:1.0: 1 port detected
[ 4.577146] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 4.577213] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
[ 4.577220] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 4.577249] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.577300] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 4.577304] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.577307] usb usb8: Product: xHCI Host Controller
[ 4.577310] usb usb8: Manufacturer: Linux 5.10.160 xhci-hcd
[ 4.577313] usb usb8: SerialNumber: xhci-hcd.5.auto
[ 4.577509] hub 8-0:1.0: USB hub found
[ 4.577523] hub 8-0:1.0: 1 port detected
[ 4.577726] usbcore: registered new interface driver cdc_acm
[ 4.577730] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.577752] usbcore: registered new interface driver cdc_wdm
[ 4.577912] usbcore: registered new interface driver uas
[ 4.577983] usbcore: registered new interface driver usb-storage
[ 4.578020] usbcore: registered new interface driver usbserial_generic
[ 4.578031] usbserial: USB Serial support registered for generic
[ 4.578051] usbcore: registered new interface driver cp210x
[ 4.578060] usbserial: USB Serial support registered for cp210x
[ 4.578102] usbcore: registered new interface driver ftdi_sio
[ 4.578111] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4.578227] usbcore: registered new interface driver keyspan
[ 4.578238] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 4.578246] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 4.578256] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 4.578264] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 4.578287] usbcore: registered new interface driver option
[ 4.578296] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.578470] usbcore: registered new interface driver oti6858
[ 4.578479] usbserial: USB Serial support registered for oti6858
[ 4.578498] usbcore: registered new interface driver pl2303
[ 4.578507] usbserial: USB Serial support registered for pl2303
[ 4.578537] usbcore: registered new interface driver qcserial
[ 4.578545] usbserial: USB Serial support registered for Qualcomm USB modem
[ 4.578580] usbcore: registered new interface driver sierra
[ 4.578589] usbserial: USB Serial support registered for Sierra USB modem
[ 4.579173] usbcore: registered new interface driver usbtouchscreen
[ 4.580250] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
[ 4.580524] i2c /dev entries driver
[ 4.584131] rk860-regulator 0-0042: Looking up vin-supply from device tree
[ 4.584140] vdd_cpu_big0_s0: supplied by vcc4v0_sys
[ 4.584146] vcc4v0_sys: could not add device link regulator.37: -ENOENT
[ 4.588243] vdd_cpu_big0_s0: 550 <--> 1050 mV at 800 mV, enabled
[ 4.592749] rk860-regulator 0-0043: Looking up vin-supply from device tree
[ 4.592755] vdd_cpu_big1_s0: supplied by vcc4v0_sys
[ 4.592760] vcc4v0_sys: could not add device link regulator.38: -ENOENT
[ 4.596842] vdd_cpu_big1_s0: 550 <--> 1050 mV at 800 mV, enabled
[ 4.601924] rk860-regulator 1-0042: Looking up vin-supply from device tree
[ 4.601931] vdd_npu_s0: supplied by vcc4v0_sys
[ 4.601936] vcc4v0_sys: could not add device link regulator.39: -ENOENT
[ 4.606038] vdd_npu_s0: 550 <--> 950 mV at 800 mV, enabled
[ 4.608265] pca953x 2-0023: Looking up vcc-supply from device tree
[ 4.608274] pca953x 2-0023: Looking up vcc-supply property in node /i2c@feaa0000/tca6424@23 failed
[ 4.608288] pca953x 2-0023: supply vcc not found, using dummy regulator
[ 4.608348] pca953x 2-0023: using AI
[ 4.613120] pca953x 2-0023: failed writing register
[ 4.618785] Goodix-TS 2-0014: Looking up AVDD28-supply from device tree
[ 4.618794] Goodix-TS 2-0014: Looking up AVDD28-supply property in node /i2c@feaa0000/gt9xx@14 failed
[ 4.618807] Goodix-TS 2-0014: supply AVDD28 not found, using dummy regulator
[ 4.618868] Goodix-TS 2-0014: Looking up VDDIO-supply from device tree
[ 4.618875] Goodix-TS 2-0014: Looking up VDDIO-supply property in node /i2c@feaa0000/gt9xx@14 failed
[ 4.618885] Goodix-TS 2-0014: supply VDDIO not found, using dummy regulator
[ 4.714945] Goodix-TS 2-0014: i2c test failed attempt 1: -6
[ 4.744868] Goodix-TS 2-0014: i2c test failed attempt 2: -6
[ 4.770165] Goodix-TS 2-0014: I2C communication failure: -6
[ 4.770649] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 4.880210] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 4.880248] edt_ft5x06: probe of 5-0038 failed with error -110
[ 4.983540] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 4.983664] Goodix-TS 5-0014: Looking up AVDD28-supply from device tree
[ 4.983682] Goodix-TS 5-0014: Looking up AVDD28-supply property in node /i2c@fead0000/gt9xx@14 failed
[ 4.983715] Goodix-TS 5-0014: supply AVDD28 not found, using dummy regulator
[ 4.983854] Goodix-TS 5-0014: Looking up VDDIO-supply from device tree
[ 4.983871] Goodix-TS 5-0014: Looking up VDDIO-supply property in node /i2c@fead0000/gt9xx@14 failed
[ 4.983899] Goodix-TS 5-0014: supply VDDIO not found, using dummy regulator
[ 5.180198] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 5.180212] Goodix-TS 5-0014: i2c test failed attempt 1: -110
[ 5.310192] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 5.310206] Goodix-TS 5-0014: i2c test failed attempt 2: -110
[ 5.336857] Goodix-TS 5-0014: I2C communication failure: -110
[ 5.337135] Goodix-TS: probe of 5-0014 failed with error -110
[ 5.440196] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 5.440211] rtc-pcf8563 5-0051: pcf8563_write_block_data: err=-110 addr=0e, data=03
[ 5.440219] rtc-pcf8563 5-0051: pcf8563_probe: write error
[ 5.440287] rtc-pcf8563: probe of 5-0051 failed with error -5
[ 5.543537] rk3x-i2c fead0000.i2c: timeout, ipd: 0x00, state: 3
[ 5.543615] rtc-rx8010: probe of 5-0032 failed with error -110
[ 5.544557] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 5.547592] vm149c 3-000c: probing...
[ 5.547602] vm149c 3-000c: driver version: 00.01.00
[ 5.547611] vm149c 3-000c: could not get module rockchip,vcm-max-current from dts!
[ 5.547619] vm149c 3-000c: could not get module rockchip,vcm-start-current from dts!
[ 5.547627] vm149c 3-000c: could not get module rockchip,vcm-rated-current from dts!
[ 5.547635] vm149c 3-000c: could not get module rockchip,vcm-step-mode from dts!
[ 5.547673] vm149c 3-000c: probing successful
[ 5.547762] vm149c 4-000c: probing...
[ 5.547771] vm149c 4-000c: driver version: 00.01.00
[ 5.547779] vm149c 4-000c: could not get module rockchip,vcm-max-current from dts!
[ 5.547787] vm149c 4-000c: could not get module rockchip,vcm-start-current from dts!
[ 5.547795] vm149c 4-000c: could not get module rockchip,vcm-rated-current from dts!
[ 5.547803] vm149c 4-000c: could not get module rockchip,vcm-step-mode from dts!
[ 5.547830] vm149c 4-000c: probing successful
[ 5.550084] rkcifhw fdce0000.rkcif: Adding to iommu group 15
[ 5.550910] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[ 5.551140] rkcif rkcif-mipi-lvds: Adding to iommu group 15
[ 5.551174] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a
[ 5.551288] rkcif rkcif-mipi-lvds: attach to cif hw node
[ 5.551298] rkcif rkcif-mipi-lvds: rkcif wait line 0
[ 5.551307] : terminal subdev does not exist
[ 5.551314] : terminal subdev does not exist
[ 5.551320] : terminal subdev does not exist
[ 5.551326] : terminal subdev does not exist
[ 5.551333] : get_remote_sensor: video pad[0] is null
[ 5.551339] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.551348] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.551354] : get_remote_sensor: video pad[0] is null
[ 5.551360] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.551367] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.551373] : get_remote_sensor: video pad[0] is null
[ 5.551379] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.551386] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.551392] : get_remote_sensor: video pad[0] is null
[ 5.551398] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.551405] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.553302] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified
[ 5.553484] rkcif rkcif-mipi-lvds1: Adding to iommu group 15
[ 5.553542] rkcif rkcif-mipi-lvds1: rkcif driver version: v00.01.0a
[ 5.553658] rkcif rkcif-mipi-lvds1: attach to cif hw node
[ 5.553667] rkcif rkcif-mipi-lvds1: rkcif wait line 0
[ 5.553675] : terminal subdev does not exist
[ 5.553681] : terminal subdev does not exist
[ 5.553687] : terminal subdev does not exist
[ 5.553693] : terminal subdev does not exist
[ 5.553700] : get_remote_sensor: video pad[0] is null
[ 5.553706] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.553714] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.553720] : get_remote_sensor: video pad[0] is null
[ 5.553725] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.553733] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.553738] : get_remote_sensor: video pad[0] is null
[ 5.553744] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.553751] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.553757] : get_remote_sensor: video pad[0] is null
[ 5.553763] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.553770] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.555579] rkcif rkcif-mipi-lvds1: No memory-region-thunderboot specified
[ 5.555763] rkcif rkcif-mipi-lvds2: Adding to iommu group 15
[ 5.555796] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a
[ 5.555903] rkcif rkcif-mipi-lvds2: attach to cif hw node
[ 5.555912] rkcif rkcif-mipi-lvds2: rkcif wait line 0
[ 5.555919] : terminal subdev does not exist
[ 5.555926] : terminal subdev does not exist
[ 5.555932] : terminal subdev does not exist
[ 5.555938] : terminal subdev does not exist
[ 5.555944] : get_remote_sensor: video pad[0] is null
[ 5.555950] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.555958] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.555964] : get_remote_sensor: video pad[0] is null
[ 5.555970] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.555977] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.555983] : get_remote_sensor: video pad[0] is null
[ 5.555988] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.555996] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.556002] : get_remote_sensor: video pad[0] is null
[ 5.556007] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.556014] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.557841] rkcif rkcif-mipi-lvds2: No memory-region-thunderboot specified
[ 5.558423] rkcif rkcif-mipi-lvds4: Adding to iommu group 15
[ 5.558457] rkcif rkcif-mipi-lvds4: rkcif driver version: v00.01.0a
[ 5.558565] rkcif rkcif-mipi-lvds4: attach to cif hw node
[ 5.558573] rkcif rkcif-mipi-lvds4: rkcif wait line 0
[ 5.558581] : terminal subdev does not exist
[ 5.558588] : terminal subdev does not exist
[ 5.558594] : terminal subdev does not exist
[ 5.558600] : terminal subdev does not exist
[ 5.558606] : get_remote_sensor: video pad[0] is null
[ 5.558612] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.558620] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.558626] : get_remote_sensor: video pad[0] is null
[ 5.558632] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.558639] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.558645] : get_remote_sensor: video pad[0] is null
[ 5.558650] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.558658] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.558664] : get_remote_sensor: video pad[0] is null
[ 5.558669] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.558676] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.560577] rkcif rkcif-mipi-lvds4: No memory-region-thunderboot specified
[ 5.560755] rkcif rkcif-mipi-lvds5: Adding to iommu group 15
[ 5.560787] rkcif rkcif-mipi-lvds5: rkcif driver version: v00.01.0a
[ 5.560902] rkcif rkcif-mipi-lvds5: attach to cif hw node
[ 5.560911] rkcif rkcif-mipi-lvds5: rkcif wait line 0
[ 5.560919] : terminal subdev does not exist
[ 5.560925] : terminal subdev does not exist
[ 5.560931] : terminal subdev does not exist
[ 5.560937] : terminal subdev does not exist
[ 5.560943] : get_remote_sensor: video pad[0] is null
[ 5.560949] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.560957] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.560963] : get_remote_sensor: video pad[0] is null
[ 5.560969] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.560976] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.560982] : get_remote_sensor: video pad[0] is null
[ 5.560988] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.560995] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.561001] : get_remote_sensor: video pad[0] is null
[ 5.561006] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.561014] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[ 5.562885] rkcif rkcif-mipi-lvds5: No memory-region-thunderboot specified
[ 5.565448] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.565459] rockchip-mipi-csi2: Async registered subdev
[ 5.565473] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds!
[ 5.565773] rkcif rkcif-mipi-lvds1: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.565783] rockchip-mipi-csi2: Async registered subdev
[ 5.565797] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds1!
[ 5.566091] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.566102] rockchip-mipi-csi2: Async registered subdev
[ 5.566129] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
[ 5.566957] rkcif rkcif-mipi-lvds4: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.566968] rockchip-mipi-csi2: Async registered subdev
[ 5.566992] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds4!
[ 5.567368] rkcif rkcif-mipi-lvds5: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.567380] rockchip-mipi-csi2: Async registered subdev
[ 5.567405] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds5!
[ 5.568200] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
[ 5.568541] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
[ 5.568552] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
[ 5.568561] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
[ 5.568776] rkisp_hw fdcb0000.rkisp: no find phandle sram
[ 5.569506] rkisp rkisp0-vir0: rkisp driver version: v02.02.01
[ 5.569641] rkisp rkisp0-vir0: No memory-region-thunderboot specified
[ 5.569783] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[ 5.571282] rkisp rkisp0-vir1: rkisp driver version: v02.02.01
[ 5.571410] rkisp rkisp0-vir1: No memory-region-thunderboot specified
[ 5.571544] rkisp rkisp0-vir1: Entity type for entity rkisp-isp-subdev was not initialized!
[ 5.575990] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
[ 5.576026] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5
[ 5.576616] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
[ 5.578304] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
[ 5.578344] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
[ 5.578623] usbcore: registered new interface driver uvcvideo
[ 5.578629] USB Video Class driver (1.1.1)
[ 5.581498] pwm-fan pwm-fan: Looking up fan-supply from device tree
[ 5.581513] pwm-fan pwm-fan: Looking up fan-supply property in node /pwm-fan failed
[ 5.582995] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[ 5.583262] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 5.583377] Bluetooth: HCI UART driver ver 2.3
[ 5.583385] Bluetooth: HCI UART protocol H4 registered
[ 5.583391] Bluetooth: HCI UART protocol ATH3K registered
[ 5.583465] usbcore: registered new interface driver bfusb
[ 5.583565] usbcore: registered new interface driver btusb
[ 5.584074] cpu cpu0: Looking up cpu-supply from device tree
[ 5.585053] cpu cpu0: bin=0
[ 5.585251] cpu cpu0: leakage=8
[ 5.585297] cpu cpu0: Looking up cpu-supply from device tree
[ 5.586848] cpu cpu0: pvtm=1373
[ 5.587107] cpu cpu0: pvtm-volt-sel=0
[ 5.587175] cpu cpu0: Looking up cpu-supply from device tree
[ 5.587455] cpu cpu0: Looking up mem-supply from device tree
[ 5.587812] cpu cpu4: Looking up cpu-supply from device tree
[ 5.589895] cpu cpu4: bin=0
[ 5.590087] cpu cpu4: leakage=7
[ 5.590130] cpu cpu4: Looking up cpu-supply from device tree
[ 5.596851] cpu cpu4: pvtm=1575
[ 5.601065] cpu cpu4: pvtm-volt-sel=0
[ 5.601156] cpu cpu4: Looking up cpu-supply from device tree
[ 5.601781] cpu cpu4: Looking up mem-supply from device tree
[ 5.602467] cpu cpu6: Looking up cpu-supply from device tree
[ 5.604517] cpu cpu6: bin=0
[ 5.604708] cpu cpu6: leakage=7
[ 5.604752] cpu cpu6: Looking up cpu-supply from device tree
[ 5.611525] cpu cpu6: pvtm=1584
[ 5.615745] cpu cpu6: pvtm-volt-sel=0
[ 5.615835] cpu cpu6: Looking up cpu-supply from device tree
[ 5.616460] cpu cpu6: Looking up mem-supply from device tree
[ 5.619053] cpu cpu0: avs=0
[ 5.621588] cpu cpu4: avs=0
[ 5.623960] cpu cpu6: avs=0
[ 5.624363] cpu cpu0: EM: OPP:816000 is inefficient
[ 5.624372] cpu cpu0: EM: OPP:600000 is inefficient
[ 5.624609] cpu cpu0: EM: created perf domain
[ 5.624696] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[ 5.625803] cpu cpu4: EM: OPP:816000 is inefficient
[ 5.625814] cpu cpu4: EM: OPP:600000 is inefficient
[ 5.626160] cpu cpu4: EM: created perf domain
[ 5.626238] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 5.635257] cpu cpu6: EM: OPP:816000 is inefficient
[ 5.635264] cpu cpu6: EM: OPP:600000 is inefficient
[ 5.635487] cpu cpu6: EM: created perf domain
[ 5.636129] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 5.650520] sdhci: Secure Digital Host Controller Interface driver
[ 5.650524] sdhci: Copyright(c) Pierre Ossman
[ 5.650527] Synopsys Designware Multimedia Card Interface Driver
[ 5.651468] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.652162] dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
[ 5.652174] dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
[ 5.652345] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[ 5.652376] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[ 5.652390] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[ 5.652445] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 88,32 bit host data width,256 deep fifo
[ 5.652575] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
[ 5.652601] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply property in node /mmc@fe2c0000 failed
[ 5.652651] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
[ 5.653318] dwmmc_rockchip fe2c0000.mmc: Got CD GPIO
[ 5.653698] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 5.653735] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 5.653756] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
[ 5.653783] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
[ 5.654831] cryptodev: driver 1.12 loaded.
[ 5.654887] hid: raw HID events driver (C) Jiri Kosina
[ 5.655226] usbcore: registered new interface driver usbhid
[ 5.655232] usbhid: USB HID core driver
[ 5.662735] rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
[ 5.662818] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
[ 5.662839] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
[ 5.676573] optee: probing for conduit method.
[ 5.676589] optee: revision 3.13 (7f1ea6d6)
[ 5.676986] optee: dynamic shared memory is enabled
[ 5.677089] optee: initialized driver
[ 5.681192] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.694833] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[ 5.733192] mmc0: Host Software Queue enabled
[ 5.733213] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 5.734173] mmcblk0: mmc0:0001 A3A561 57.6 GiB
[ 5.734443] mmcblk0boot0: mmc0:0001 A3A561 partition 1 4.00 MiB
[ 5.734703] mmcblk0boot1: mmc0:0001 A3A561 partition 2 4.00 MiB
[ 5.735116] mmcblk0rpmb: mmc0:0001 A3A561 partition 3 16.0 MiB, chardev (236:0)
[ 5.739322] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 5.756458] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply from device tree
[ 5.756490] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply property in node /power-management@fd8d8000/power-controller failed
[ 5.780405] rk3x-i2c fec90000.i2c: timeout, ipd: 0x00, state: 3
[ 5.780421] nau8822 7-001a: Failed to issue reset: -110
[ 5.780581] nau8822: probe of 7-001a failed with error -110
[ 5.786428] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
[ 5.786465] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
[ 5.791571] debugfs: File 'Capture' in directory 'dapm' already present!
[ 5.794384] input: rockchip,dp1 rockchip,dp1 as /devices/platform/dp1-sound/sound/card0/input1
[ 5.798358] IPVS: Registered protocols ()
[ 5.798401] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 5.798564] IPVS: ipvs loaded.
[ 5.798960] Initializing XFRM netlink socket
[ 5.799494] NET: Registered protocol family 10
[ 5.800699] Segment Routing with IPv6
[ 5.800833] NET: Registered protocol family 17
[ 5.800860] NET: Registered protocol family 15
[ 5.800919] Bridge firewalling registered
[ 5.800927] can: controller area network core
[ 5.800982] NET: Registered protocol family 29
[ 5.800989] can: raw protocol
[ 5.800999] can: broadcast manager protocol
[ 5.801013] can: netlink gateway - max_hops=1
[ 5.801604] Bluetooth: RFCOMM TTY layer initialized
[ 5.801621] Bluetooth: RFCOMM socket layer initialized
[ 5.801645] Bluetooth: RFCOMM ver 1.11
[ 5.801661] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.801668] Bluetooth: BNEP filters: protocol multicast
[ 5.801680] Bluetooth: BNEP socket layer initialized
[ 5.801687] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.801698] Bluetooth: HIDP socket layer initialized
[ 5.801745] [BT_RFKILL]: Enter rfkill_rk_init
[ 5.801751] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 5.802832] Key type dns_resolver registered
[ 5.804745] Loading compiled-in X.509 certificates
[ 5.805794] pstore: Using crash dump compression: deflate
[ 5.806195] rga3_core0 fdb60000.rga: Adding to iommu group 2
[ 5.806489] rga: rga3_core0, irq = 34, match scheduler
[ 5.807304] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[ 5.807380] rga: rga3_core0 probe successfully
[ 5.808045] rga3_core1 fdb70000.rga: Adding to iommu group 3
[ 5.808295] rga: rga3_core1, irq = 35, match scheduler
[ 5.808878] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[ 5.808955] rga: rga3_core1 probe successfully
[ 5.809651] rga: rga2, irq = 36, match scheduler
[ 5.810078] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[ 5.810094] rga: rga2 probe successfully
[ 5.810553] rga_iommu: IOMMU binding successfully, default mapping core[0x1]
[ 5.810763] rga: Module initialized. v1.2.27
[ 5.824639] vendor storage:20190527 ret = 0
[ 5.849984] reg-fixed-voltage pcie20-avdd0v85: Looking up vin-supply from device tree
[ 5.850329] pcie20_avdd0v85: supplied by vdd_0v85_s0
[ 5.850351] vdd_0v85_s0: could not add device link regulator.40: -ENOENT
[ 5.850698] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
[ 5.850777] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
[ 5.851028] mali fb000000.gpu: Kernel DDK version g18p0-01eac0
[ 5.851150] mali fb000000.gpu: Looking up mali-supply from device tree
[ 5.851163] pcie20_avdd0v85: 850 mV, enabled
[ 5.851554] mali fb000000.gpu: Looking up mem-supply from device tree
[ 5.851798] reg-fixed-voltage pcie20-avdd0v85: pcie20_avdd0v85 supplying 850000uV
[ 5.851807] mali fb000000.gpu: Looking up mali-supply from device tree
[ 5.851852] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 5.851863] vdd_gpu_s0: Failed to create debugfs directory
[ 5.851878] mali fb000000.gpu: Looking up mem-supply from device tree
[ 5.851917] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 5.851927] vdd_gpu_s0: Failed to create debugfs directory
[ 5.852160] reg-fixed-voltage pcie20-avdd1v8: Looking up vin-supply from device tree
[ 5.852334] mali fb000000.gpu: Looking up mali-supply from device tree
[ 5.852339] pcie20_avdd1v8: supplied by avcc_1v8_s0
[ 5.852356] avcc_1v8_s0: could not add device link regulator.41: -ENOENT
[ 5.852391] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 5.852401] vdd_gpu_s0: Failed to create debugfs directory
[ 5.852929] mali fb000000.gpu: bin=0
[ 5.853140] mali fb000000.gpu: leakage=11
[ 5.853209] mali fb000000.gpu: Looking up mali-supply from device tree
[ 5.858411] pcie20_avdd1v8: 1800 mV, enabled
[ 5.858544] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[ 5.859628] reg-fixed-voltage pcie20-avdd1v8: pcie20_avdd1v8 supplying 1800000uV
[ 5.859930] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
[ 5.859967] pcie30_avdd1v8: supplied by avcc_1v8_s0
[ 5.859984] avcc_1v8_s0: could not add device link regulator.42: -ENOENT
[ 5.860251] mali fb000000.gpu: pvtm=821
[ 5.864711] pcie30_avdd1v8: 1800 mV, enabled
[ 5.865036] mali fb000000.gpu: pvtm-volt-sel=1
[ 5.868594] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
[ 5.868723] mali fb000000.gpu: avs=0
[ 5.868749] reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
[ 5.868818] pcie30_avdd0v75: supplied by avdd_0v75_s0
[ 5.868827] avdd_0v75_s0: could not add device link regulator.43: -ENOENT
[ 5.869411] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 5.873439] pcie30_avdd0v75: 750 mV, enabled
[ 5.874159] reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
[ 5.874279] mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
[ 5.874287] mali fb000000.gpu: falling back to closest match: r0p0 status 0
[ 5.874292] mali fb000000.gpu: Execution proceeding normally with fallback match
[ 5.874301] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[ 5.874358] mali fb000000.gpu: No priority control manager is configured
[ 5.874790] mali fb000000.gpu: No memory group manager is configured
[ 5.874823] mali fb000000.gpu: Protected memory allocator not available
[ 5.875085] rockchip-dmc dmc: Looking up center-supply from device tree
[ 5.875499] rockchip-dmc dmc: Looking up center-supply from device tree
[ 5.875527] vdd_ddr_s0: could not add device link dmc: -EEXIST
[ 5.875531] vdd_ddr_s0: Failed to create debugfs directory
[ 5.875939] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[ 5.876104] rockchip-dmc dmc: bin=0
[ 5.876289] rockchip-dmc dmc: leakage=27
[ 5.876310] rockchip-dmc dmc: leakage-volt-sel=0
[ 5.876320] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 5.876327] rockchip-dmc dmc: soc version=0, speed=0
[ 5.876346] rockchip-dmc dmc: opp_parse_supplies: Invalid number of elements in opp-microvolt property (6) with supplies (1)
[ 5.876353] rockchip-dmc dmc: _of_add_opp_table_v2: Failed to add OPP, -22
[ 5.876359] rockchip-dmc dmc: Invalid operating-points in device tree.
[ 5.876387] rockchip-dmc: probe of dmc failed with error -22
[ 5.876756] rockchip-csi2-dphy csi2-dcphy0: csi2 dphy0 probe successfully!
[ 5.877138] rockchip-csi2-dphy csi2-dcphy1: csi2 dphy1 probe successfully!
[ 5.877593] mali fb000000.gpu: Probed as mali0
[ 5.886432] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[ 5.886442] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[ 5.886451] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[ 5.886460] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[ 5.886956] [drm] failed to init overlay plane Cluster0-win1
[ 5.887010] [drm] failed to init overlay plane Cluster1-win1
[ 5.887062] [drm] failed to init overlay plane Cluster2-win1
[ 5.887115] [drm] failed to init overlay plane Cluster3-win1
[ 5.907114] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc009124550)
[ 5.908597] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[ 5.909899] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0091327d8)
[ 5.909958] rockchip-drm display-subsystem: bound fde20000.dsi (ops 0xffffffc009134ec8)
[ 5.910017] rockchip-drm display-subsystem: bound fde30000.dsi (ops 0xffffffc009134ec8)
[ 5.910100] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc0091352c8)
[ 5.910977] [drm:init_loader_memory] *ERROR* Reserved logo memory should be aligned as:0x1000, cureent is:start[0x00000000edf00000] size[0x000000000015fe40]
[ 6.058306] rockchip-drm display-subsystem: connector[DP-1] can't found any modes
[ 6.058530] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 6.059001] dwhdmi-rockchip fde80000.hdmi: i2c read err!
[ 6.059073] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 6.109285] rockchip-vop2 fdd90000.vop: [drm:vop2_setup_layer_mixer_for_vp] *ERROR* wait layer cfg done timeout: 0x75643102--0x75463102
[ 6.291875] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[ 6.295641] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[ 6.297170] input: adc-keys as /devices/platform/adc-keys/input/input2
[ 6.299007] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 6.306616] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 6.311981] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input3
[ 6.313329] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 6.314883] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 6.316947] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 6.318057] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 6.319478] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
[ 6.319504] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.319559] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
[ 6.319583] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.319631] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
[ 6.319654] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.320309] rkcif rkcif-mipi-lvds: clear unready subdev num: 1
[ 6.320316] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.320603] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.320618] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.320634] rkcif-mipi-lvds: Async subdev notifier completed
[ 6.320637] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.320647] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.320650] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP
[ 6.320656] rkcif rkcif-mipi-lvds1: clear unready subdev num: 1
[ 6.320660] rockchip-csi2-dphy1: No link between dphy and sensor
[ 6.320934] rockchip-csi2-dphy1: No link between dphy and sensor
[ 6.320946] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.320961] rkcif-mipi-lvds1: Async subdev notifier completed
[ 6.320965] rockchip-csi2-dphy1: No link between dphy and sensor
[ 6.320974] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.320977] rkcif-mipi-lvds1: There is not terminal subdev, not synchronized with ISP
[ 6.320983] rkcif rkcif-mipi-lvds2: clear unready subdev num: 1
[ 6.320988] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.321250] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.321262] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321277] rkcif-mipi-lvds2: Async subdev notifier completed
[ 6.321280] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.321289] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321292] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 6.321298] rkcif rkcif-mipi-lvds4: clear unready subdev num: 1
[ 6.321302] rockchip-csi2-dphy4: No link between dphy and sensor
[ 6.321567] rockchip-csi2-dphy4: No link between dphy and sensor
[ 6.321580] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321594] rkcif-mipi-lvds4: Async subdev notifier completed
[ 6.321598] rockchip-csi2-dphy4: No link between dphy and sensor
[ 6.321607] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321610] rkcif-mipi-lvds4: There is not terminal subdev, not synchronized with ISP
[ 6.321615] rkcif rkcif-mipi-lvds5: clear unready subdev num: 1
[ 6.321620] rockchip-csi2-dphy5: No link between dphy and sensor
[ 6.321881] rockchip-csi2-dphy5: No link between dphy and sensor
[ 6.321894] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321909] rkcif-mipi-lvds5: Async subdev notifier completed
[ 6.321912] rockchip-csi2-dphy5: No link between dphy and sensor
[ 6.321922] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321925] rkcif-mipi-lvds5: There is not terminal subdev, not synchronized with ISP
[ 6.321931] rockchip-csi2-dphy5: No link between dphy and sensor
[ 6.321947] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321951] rkcif-mipi-lvds5: There is not terminal subdev, not synchronized with ISP
[ 6.321957] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.321971] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.321974] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP
[ 6.321995] rockchip-csi2-dphy1: No link between dphy and sensor
[ 6.322009] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.322012] rkcif-mipi-lvds1: There is not terminal subdev, not synchronized with ISP
[ 6.322031] rockchip-csi2-dphy0: No link between dphy and sensor
[ 6.322044] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.322047] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[ 6.322065] rockchip-csi2-dphy4: No link between dphy and sensor
[ 6.322078] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 6.322081] rkcif-mipi-lvds4: There is not terminal subdev, not synchronized with ISP
[ 6.323088] RKNPU fdab0000.npu: Adding to iommu group 0
[ 6.323230] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[ 6.323323] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 6.323913] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[ 6.324428] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 6.324444] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 6.324456] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 6.324766] [drm] Initialized rknpu 0.8.8 20230428 for fdab0000.npu on minor 1
[ 6.325113] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
[ 6.325138] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.325215] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
[ 6.325239] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.325304] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
[ 6.325327] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.325453] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 6.325475] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 6.325479] vdd_npu_s0: Failed to create debugfs directory
[ 6.325942] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[ 6.325962] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 6.325966] vdd_npu_s0: Failed to create debugfs directory
[ 6.326515] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 6.326536] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 6.326540] vdd_npu_s0: Failed to create debugfs directory
[ 6.328160] RKNPU fdab0000.npu: RKNPU: bin=0
[ 6.328357] RKNPU fdab0000.npu: leakage=6
[ 6.328439] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 6.328479] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[ 6.335234] RKNPU fdab0000.npu: pvtm=813
[ 6.339435] RKNPU fdab0000.npu: pvtm-volt-sel=0
[ 6.341452] RKNPU fdab0000.npu: avs=0
[ 6.341724] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 6.352530] RKNPU fdab0000.npu: failed to find power_model node
[ 6.352545] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 6.352556] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[ 6.354724] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.357517] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 6.360285] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 6.360451] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.360880] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.360894] cfg80211: failed to load regulatory.db
[ 6.363068] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 6.363105] rockchip-suspend not set sleep-mode-config for mem-lite
[ 6.363114] rockchip-suspend not set wakeup-config for mem-lite
[ 6.363130] rockchip-suspend not set sleep-mode-config for mem-ultra
[ 6.363138] rockchip-suspend not set wakeup-config for mem-ultra
[ 6.366360] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:45:00', on 'Aug 23 2024'.
[ 6.366650] typec_fusb302 2-0022: Looking up vbus-supply from device tree
[ 6.366776] Mali:
[ 6.366778] Mali device driver loaded
[ 6.366785] rkisp rkisp0-vir0: clear unready subdev num: 1
[ 6.367043] rkisp0-vir0: Async subdev notifier completed
[ 6.367049] rkisp rkisp0-vir1: clear unready subdev num: 1
[ 6.367272] rkisp0-vir1: Async subdev notifier completed
[ 6.367278] ALSA device list:
[ 6.367282] #0: rockchip,dp1
[ 6.367285] #1: rockchip,hdmiin
[ 6.367288] #2: rockchip-hdmi0
[ 6.367581] typec_fusb302 5-0022: Looking up vbus-supply from device tree
[ 6.374653] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.374678] VFS: Mounted root (ext4 filesystem) on device 179:6.
[ 6.375126] devtmpfs: mounted
[ 6.379350] Freeing unused kernel memory: 6848K
[ 6.427324] Run /sbin/init as init process
[ 6.427336] with arguments:
[ 6.427344] /sbin/init
[ 6.427352] with environment:
[ 6.427360] HOME=/
[ 6.427368] TERM=linux
[ 6.427376] storagemedia=emmc
[ 6.520840] systemd[1]: System time before build time, advancing clock.
[ 6.530693] systemd[1]: Failed to find module 'autofs4'
[ 6.544767] systemd[1]: systemd 249.11-0ubuntu3.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 6.546364] systemd[1]: Detected architecture arm64.
[ 6.549964] systemd[1]: Hostname set to <ok3588>.
[ 6.553997] systemd[1]: Initializing machine ID from D-Bus machine ID.
[ 6.617775] systemd-fstab-generator[287]: Ignoring "noauto" option for root device
[ 6.957632] systemd[1]: Configuration file /lib/systemd/system/adb.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 6.975758] systemd[1]: Configuration file /lib/systemd/system/rkaiq_3A.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[ 7.004817] systemd[1]: Queued start job for default target Graphical Interface.
[ 7.005778] systemd[1]: Created slice Slice /system/modprobe.
[ 7.006237] systemd[1]: Created slice Slice /system/serial-getty.
[ 7.006465] systemd[1]: Created slice User and Session Slice.
[ 7.006616] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.006778] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 7.006926] systemd[1]: Reached target User and Group Name Lookups.
[ 7.007008] systemd[1]: Reached target Slice Units.
[ 7.007068] systemd[1]: Reached target Mounting snaps.
[ 7.007117] systemd[1]: Reached target Mounted snaps.
[ 7.007174] systemd[1]: Reached target Swaps.
[ 7.007236] systemd[1]: Reached target Local Verity Protected Volumes.
[ 7.007399] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.007614] systemd[1]: Listening on LVM2 poll daemon socket.
[ 7.007835] systemd[1]: Listening on multipathd control socket.
[ 7.008018] systemd[1]: Listening on Syslog Socket.
[ 7.008186] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.008326] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.012957] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 7.013068] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.013220] systemd[1]: Listening on Journal Socket.
[ 7.014147] systemd[1]: Listening on udev Control Socket.
[ 7.014277] systemd[1]: Listening on udev Kernel Socket.
[ 7.014411] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 7.014936] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.015517] systemd[1]: Mounting /sys/kernel/debug...
[ 7.016134] systemd[1]: Mounting Kernel Trace File System...
[ 7.017575] systemd[1]: Starting Journal Service...
[ 7.018863] systemd[1]: Starting Restore / save the current clock...
[ 7.019699] systemd[1]: Starting Set the console keyboard layout...
[ 7.019806] systemd[1]: Condition check resulted in Create List of Static Device Nodes being skipped.
[ 7.020559] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 7.020646] systemd[1]: Condition check resulted in LXD - agent being skipped.
[ 7.021457] systemd[1]: Starting Load Kernel Module configfs...
[ 7.022310] systemd[1]: Starting Load Kernel Module drm...
[ 7.023160] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 7.024092] systemd[1]: Starting Load Kernel Module fuse...
[ 7.025033] systemd[1]: Starting Enable Rockchip camera engine rkaiq...
[ 7.025251] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 7.027136] systemd[1]: Starting Load Kernel Modules...
[ 7.028182] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.029208] systemd[1]: Starting Coldplug All udev Devices...
[ 7.031311] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.031529] systemd[1]: Mounted /sys/kernel/debug.
[ 7.031674] systemd[1]: Mounted Kernel Trace File System.
[ 7.032014] systemd[1]: Finished Restore / save the current clock.
[ 7.035166] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[ 7.037163] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 7.037343] systemd[1]: Finished Load Kernel Module configfs.
[ 7.037932] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 7.038082] systemd[1]: Finished Load Kernel Module drm.
[ 7.038334] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 7.038468] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 7.038709] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 7.038835] systemd[1]: Finished Load Kernel Module fuse.
[ 7.039843] systemd[1]: Mounting FUSE Control File System...
[ 7.040624] systemd[1]: Mounting Kernel Configuration File System...
[ 7.041090] systemd[1]: Finished Load Kernel Modules.
[ 7.041356] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.042219] systemd[1]: Starting Device-Mapper Multipath Device Controller...
[ 7.043036] systemd[1]: Starting Platform Persistent Storage Archival...
[ 7.043943] systemd[1]: Starting Load/Save Random Seed...
[ 7.044730] systemd[1]: Starting Apply Kernel Variables...
[ 7.045546] systemd[1]: Starting Create System Users...
[ 7.045935] systemd[1]: Started Enable Rockchip camera engine rkaiq.
[ 7.046986] systemd[1]: Mounted FUSE Control File System.
[ 7.047560] systemd[1]: Mounted Kernel Configuration File System.
[ 7.053122] systemd[1]: Finished Platform Persistent Storage Archival.
[ 7.066554] systemd[1]: Finished Load/Save Random Seed.
[ 7.067097] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 7.070167] rk-pcie fe190000.pcie: PCIe Link Fail
[ 7.070171] rk-pcie fe190000.pcie: failed to initialize host
[ 7.083522] rk-pcie fe170000.pcie: PCIe Link Fail
[ 7.083533] rk-pcie fe170000.pcie: failed to initialize host
[ 7.089411] systemd[1]: Finished Create System Users.
[ 7.090347] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.091875] systemd[1]: Finished Apply Kernel Variables.
[ 7.093008] systemd[1]: Finished Set the console keyboard layout.
[ 7.103087] systemd[1]: rkaiq_3A.service: Deactivated successfully.
[ 7.109450] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 7.111523] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 7.112636] systemd[1]: Started Device-Mapper Multipath Device Controller.
[ 7.151516] systemd[1]: Started Journal Service.
[ 7.164275] systemd-journald[304]: Received client request to flush runtime journal.
[ 7.388513] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.388538] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.388539] stream_cif_mipi_id0: update sensor info failed -19
[ 7.388688] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.388698] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.388700] rkcif_tools_id2: update sensor info failed -19
[ 7.389105] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.389115] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.389117] stream_cif_mipi_id2: update sensor info failed -19
[ 7.389606] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.389614] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.389615] stream_cif_mipi_id1: update sensor info failed -19
[ 7.391839] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.391862] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.391864] rkcif_scale_ch3: update sensor info failed -19
[ 7.392149] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.392164] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.392165] rkcif_scale_ch0: update sensor info failed -19
[ 7.394502] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.394530] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.394532] stream_cif_mipi_id3: update sensor info failed -19
[ 7.394762] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.394796] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.394797] rkcif_scale_ch2: update sensor info failed -19
[ 7.397526] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.397545] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.397547] stream_cif_mipi_id0: update sensor info failed -19
[ 7.398882] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.398918] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.398919] stream_cif_mipi_id1: update sensor info failed -19
[ 7.401338] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.401358] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.401361] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.401364] rkcif_scale_ch1: update sensor info failed -19
[ 7.401373] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.401374] rkcif_scale_ch0: update sensor info failed -19
[ 7.401725] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.401740] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.401744] stream_cif_mipi_id2: update sensor info failed -19
[ 7.401816] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.401824] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.401826] stream_cif_mipi_id3: update sensor info failed -19
[ 7.402666] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.402676] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.402677] rkcif_scale_ch2: update sensor info failed -19
[ 7.402917] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.402925] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.402927] rkcif_tools_id0: update sensor info failed -19
[ 7.403217] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.403225] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.403227] rkcif_scale_ch3: update sensor info failed -19
[ 7.404066] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.404085] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.404087] rkcif_scale_ch1: update sensor info failed -19
[ 7.404689] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.404709] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.404710] rkcif_tools_id0: update sensor info failed -19
[ 7.405007] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.405017] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.405019] rkcif_tools_id1: update sensor info failed -19
[ 7.405246] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.405261] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.405263] rkcif_tools_id1: update sensor info failed -19
[ 7.406648] rockchip-csi2-dphy1: No link between dphy and sensor
[ 7.406663] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.406664] rkcif_tools_id2: update sensor info failed -19
[ 7.409325] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.409347] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.409348] stream_cif_mipi_id1: update sensor info failed -19
[ 7.409536] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.409547] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.409549] stream_cif_mipi_id2: update sensor info failed -19
[ 7.411247] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.411287] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.411290] stream_cif_mipi_id3: update sensor info failed -19
[ 7.412410] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.412425] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.412426] rkcif_scale_ch1: update sensor info failed -19
[ 7.413761] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.413790] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.413794] rkcif_scale_ch0: update sensor info failed -19
[ 7.416210] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.416236] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.416237] rkcif_tools_id2: update sensor info failed -19
[ 7.416808] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.416900] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.416902] stream_cif_mipi_id1: update sensor info failed -19
[ 7.417720] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.417740] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.417742] rkcif_tools_id0: update sensor info failed -19
[ 7.417862] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.417873] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.417874] rkcif_scale_ch2: update sensor info failed -19
[ 7.418045] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.418163] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.418165] stream_cif_mipi_id3: update sensor info failed -19
[ 7.418978] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.418993] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.418995] stream_cif_mipi_id0: update sensor info failed -19
[ 7.419440] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.419454] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.419455] stream_cif_mipi_id2: update sensor info failed -19
[ 7.420078] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.420092] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.420093] rkcif_scale_ch1: update sensor info failed -19
[ 7.420617] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.420639] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.420641] stream_cif_mipi_id0: update sensor info failed -19
[ 7.421565] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.421583] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.421585] rkcif_scale_ch0: update sensor info failed -19
[ 7.422711] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.422728] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.422730] rkcif_scale_ch3: update sensor info failed -19
[ 7.423288] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.423305] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.423307] rkcif_scale_ch2: update sensor info failed -19
[ 7.425383] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.425422] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.425426] rkcif_tools_id1: update sensor info failed -19
[ 7.425734] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.425750] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.425752] rkcif_tools_id0: update sensor info failed -19
[ 7.427581] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.427605] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.427606] rkcif_tools_id1: update sensor info failed -19
[ 7.427796] rockchip-csi2-dphy0: No link between dphy and sensor
[ 7.427806] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.427807] rkcif_scale_ch3: update sensor info failed -19
[ 7.429456] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.429478] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.429479] stream_cif_mipi_id1: update sensor info failed -19
[ 7.429655] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.429667] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.429668] stream_cif_mipi_id0: update sensor info failed -19
[ 7.431174] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.431194] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.431196] rkcif_scale_ch0: update sensor info failed -19
[ 7.432020] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.432038] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.432039] stream_cif_mipi_id3: update sensor info failed -19
[ 7.432216] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.432227] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.432229] stream_cif_mipi_id2: update sensor info failed -19
[ 7.433416] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.433437] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.433452] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 7.433454] rkcif_scale_ch3: update sensor info failed -19
[ 7.433997] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 7.434000] rkcif_tools_id0: update sensor info failed -19
[ 7.434268] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.434278] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.434280] rkcif_scale_ch1: update sensor info failed -19
[ 7.434626] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.434636] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.434638] rkcif_scale_ch2: update sensor info failed -19
[ 7.435121] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.435130] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 7.435131] rkcif_tools_id1: update sensor info failed -19
[ 7.439752] rockchip-csi2-dphy4: No link between dphy and sensor
[ 7.439773] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.439774] rkcif_tools_id2: update sensor info failed -19
[ 7.458797] rockchip-csi2-dphy5: No link between dphy and sensor
[ 7.458819] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 7.458820] rkcif_tools_id2: update sensor info failed -19
[ 7.631773] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[ 7.633753] EXT4-fs (mmcblk0p8): warning: mounting unchecked fs, running e2fsck is recommended
[ 7.633908] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
[ 7.633917] ext2 filesystem being mounted at /userdata supports timestamps until 2038 (0x7fffffff)
[ 7.635684] EXT4-fs (mmcblk0p7): mounting ext2 file system using the ext4 subsystem
[ 7.637769] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)
[ 7.637785] ext2 filesystem being mounted at /oem supports timestamps until 2038 (0x7fffffff)
[ 7.819568] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 1
[ 7.884481] EXT4-fs (mmcblk0p6): resizing filesystem from 1686272 to 3670016 blocks
[ 7.994808] EXT4-fs (mmcblk0p6): resized filesystem to 3670016
[ 8.047476] EXT4-fs (mmcblk0p8): resizing filesystem from 76822 to 11339768 blocks
[ 10.144296] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal not lock, tmds_clk_ratio:0
[ 10.144313] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing mu_st:0x0, scdc_st:0x0, dma_st10:0x10
[ 13.532175] EXT4-fs (mmcblk0p8): resized filesystem to 11339768
[ 13.753478] systemd-fstab-generator[729]: Ignoring "noauto" option for root device
[ 14.050133] file system registered
[ 14.064345] Mass Storage Function, version: 2009/09/11
[ 14.064352] LUN: removable file: (no medium)
[ 14.116840] read descriptors
[ 14.116850] read strings
[ 14.456841] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:02] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 14.458064] dwmac4: Master AXI performs any burst length
[ 14.458073] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 14.458082] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 14.458167] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 14.458299] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 14.837980] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838004] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.838005] stream_cif_mipi_id0: update sensor info failed -19
[ 14.838302] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838313] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.838314] stream_cif_mipi_id1: update sensor info failed -19
[ 14.838467] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838475] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.838477] rkcif_tools_id2: update sensor info failed -19
[ 14.838622] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838629] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.838630] stream_cif_mipi_id2: update sensor info failed -19
[ 14.838772] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838779] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.838780] stream_cif_mipi_id3: update sensor info failed -19
[ 14.838923] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.838930] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.838931] rkcif_scale_ch0: update sensor info failed -19
[ 14.839079] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.839085] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.839086] rkcif_scale_ch1: update sensor info failed -19
[ 14.839228] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.839233] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.839235] rkcif_scale_ch2: update sensor info failed -19
[ 14.839373] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.839379] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.839380] rkcif_scale_ch3: update sensor info failed -19
[ 14.839532] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.839537] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.839538] rkcif_tools_id0: update sensor info failed -19
[ 14.839674] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.839680] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.839681] rkcif_tools_id1: update sensor info failed -19
[ 14.839818] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.839831] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.839833] stream_cif_mipi_id0: update sensor info failed -19
[ 14.839970] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.839977] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.839978] stream_cif_mipi_id1: update sensor info failed -19
[ 14.840112] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840118] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.840119] stream_cif_mipi_id2: update sensor info failed -19
[ 14.840288] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840295] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.840296] stream_cif_mipi_id3: update sensor info failed -19
[ 14.840449] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840455] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.840457] rkcif_scale_ch0: update sensor info failed -19
[ 14.840599] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840605] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.840606] rkcif_scale_ch1: update sensor info failed -19
[ 14.840751] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840757] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.840757] rkcif_scale_ch2: update sensor info failed -19
[ 14.840898] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.840904] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.840905] rkcif_scale_ch3: update sensor info failed -19
[ 14.841048] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.841053] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.841055] rkcif_tools_id0: update sensor info failed -19
[ 14.841198] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.841203] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.841204] rkcif_tools_id1: update sensor info failed -19
[ 14.841355] rockchip-csi2-dphy1: No link between dphy and sensor
[ 14.841361] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.841362] rkcif_tools_id2: update sensor info failed -19
[ 14.841505] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.841520] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.841521] stream_cif_mipi_id0: update sensor info failed -19
[ 14.841658] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.841665] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.841666] stream_cif_mipi_id1: update sensor info failed -19
[ 14.841809] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.841816] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.841819] stream_cif_mipi_id2: update sensor info failed -19
[ 14.841961] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.841967] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.841968] stream_cif_mipi_id3: update sensor info failed -19
[ 14.842113] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842118] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.842120] rkcif_scale_ch0: update sensor info failed -19
[ 14.842266] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842271] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.842273] rkcif_scale_ch1: update sensor info failed -19
[ 14.842420] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842426] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.842427] rkcif_scale_ch2: update sensor info failed -19
[ 14.842576] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842582] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.842583] rkcif_scale_ch3: update sensor info failed -19
[ 14.842731] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842737] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.842738] rkcif_tools_id0: update sensor info failed -19
[ 14.842894] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.842899] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.842901] rkcif_tools_id1: update sensor info failed -19
[ 14.843060] rockchip-csi2-dphy0: No link between dphy and sensor
[ 14.843066] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.843067] rkcif_tools_id2: update sensor info failed -19
[ 14.843227] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.843241] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.843242] stream_cif_mipi_id0: update sensor info failed -19
[ 14.843383] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.843389] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.843391] stream_cif_mipi_id1: update sensor info failed -19
[ 14.843553] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.843565] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.843572] stream_cif_mipi_id2: update sensor info failed -19
[ 14.843730] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.843737] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.843738] stream_cif_mipi_id3: update sensor info failed -19
[ 14.843893] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.843900] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.843902] rkcif_scale_ch0: update sensor info failed -19
[ 14.844054] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844061] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.844062] rkcif_scale_ch1: update sensor info failed -19
[ 14.844220] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844227] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.844228] rkcif_scale_ch2: update sensor info failed -19
[ 14.844387] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844393] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.844394] rkcif_scale_ch3: update sensor info failed -19
[ 14.844556] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844563] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.844564] rkcif_tools_id0: update sensor info failed -19
[ 14.844726] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844732] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.844733] rkcif_tools_id1: update sensor info failed -19
[ 14.844899] rockchip-csi2-dphy4: No link between dphy and sensor
[ 14.844908] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.844910] rkcif_tools_id2: update sensor info failed -19
[ 14.845052] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845067] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.845072] stream_cif_mipi_id0: update sensor info failed -19
[ 14.845218] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845226] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.845227] stream_cif_mipi_id1: update sensor info failed -19
[ 14.845375] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845382] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.845383] stream_cif_mipi_id2: update sensor info failed -19
[ 14.845531] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845537] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.845538] stream_cif_mipi_id3: update sensor info failed -19
[ 14.845694] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845700] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.845701] rkcif_scale_ch0: update sensor info failed -19
[ 14.845865] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.845874] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.845875] rkcif_scale_ch1: update sensor info failed -19
[ 14.846040] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.846046] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.846047] rkcif_scale_ch2: update sensor info failed -19
[ 14.846219] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.846226] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 14.846227] rkcif_scale_ch3: update sensor info failed -19
[ 14.846398] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.846404] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 14.846405] rkcif_tools_id0: update sensor info failed -19
[ 14.846578] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.846587] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 14.846588] rkcif_tools_id1: update sensor info failed -19
[ 14.846770] rockchip-csi2-dphy5: No link between dphy and sensor
[ 14.846776] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 14.846777] rkcif_tools_id2: update sensor info failed -19
[ 14.860234] dma-pl330 fea30000.dma-controller: pl330_submit_req:1737 Try increasing mcbufsz (258/256)
[ 14.860238] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
[ 15.296616] dwc3 fc000000.usb: device reset
[ 15.362528] android_work: sent uevent USB_STATE=CONNECTED
[ 15.367061] android_work: sent uevent USB_STATE=CONFIGURED
[ 15.520812] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.520833] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.520835] stream_cif_mipi_id0: update sensor info failed -19
[ 15.520890] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.520895] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.520896] stream_cif_mipi_id1: update sensor info failed -19
[ 15.520950] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.520955] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.520956] rkcif_tools_id2: update sensor info failed -19
[ 15.521008] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521012] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.521014] stream_cif_mipi_id2: update sensor info failed -19
[ 15.521067] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521071] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.521073] stream_cif_mipi_id3: update sensor info failed -19
[ 15.521125] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521130] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.521131] rkcif_scale_ch0: update sensor info failed -19
[ 15.521185] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521190] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.521191] rkcif_scale_ch1: update sensor info failed -19
[ 15.521243] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521247] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.521248] rkcif_scale_ch2: update sensor info failed -19
[ 15.521302] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521306] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.521308] rkcif_scale_ch3: update sensor info failed -19
[ 15.521360] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521364] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.521366] rkcif_tools_id0: update sensor info failed -19
[ 15.521418] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.521422] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.521423] rkcif_tools_id1: update sensor info failed -19
[ 15.521478] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521490] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.521491] stream_cif_mipi_id0: update sensor info failed -19
[ 15.521543] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521547] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.521549] stream_cif_mipi_id1: update sensor info failed -19
[ 15.521602] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521607] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.521609] stream_cif_mipi_id2: update sensor info failed -19
[ 15.521662] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521666] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.521668] stream_cif_mipi_id3: update sensor info failed -19
[ 15.521722] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521726] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.521727] rkcif_scale_ch0: update sensor info failed -19
[ 15.521781] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521785] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.521786] rkcif_scale_ch1: update sensor info failed -19
[ 15.521838] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521842] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.521844] rkcif_scale_ch2: update sensor info failed -19
[ 15.521895] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521899] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.521901] rkcif_scale_ch3: update sensor info failed -19
[ 15.521954] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.521958] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.521959] rkcif_tools_id0: update sensor info failed -19
[ 15.522009] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.522013] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.522014] rkcif_tools_id1: update sensor info failed -19
[ 15.522066] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.522071] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.522072] rkcif_tools_id2: update sensor info failed -19
[ 15.522126] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522141] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.522142] stream_cif_mipi_id0: update sensor info failed -19
[ 15.522196] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522200] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.522201] stream_cif_mipi_id1: update sensor info failed -19
[ 15.522252] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522257] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.522258] stream_cif_mipi_id2: update sensor info failed -19
[ 15.522310] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522314] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.522315] stream_cif_mipi_id3: update sensor info failed -19
[ 15.522368] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522372] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.522373] rkcif_scale_ch0: update sensor info failed -19
[ 15.522425] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522430] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.522431] rkcif_scale_ch1: update sensor info failed -19
[ 15.522486] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522491] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.522492] rkcif_scale_ch2: update sensor info failed -19
[ 15.522544] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522548] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.522549] rkcif_scale_ch3: update sensor info failed -19
[ 15.522598] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522602] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.522604] rkcif_tools_id0: update sensor info failed -19
[ 15.522655] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522659] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.522660] rkcif_tools_id1: update sensor info failed -19
[ 15.522713] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.522717] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.522718] rkcif_tools_id2: update sensor info failed -19
[ 15.522772] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.522786] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.522787] stream_cif_mipi_id0: update sensor info failed -19
[ 15.522839] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.522843] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.522844] stream_cif_mipi_id1: update sensor info failed -19
[ 15.522896] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.522900] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.522901] stream_cif_mipi_id2: update sensor info failed -19
[ 15.522954] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.522958] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.522959] stream_cif_mipi_id3: update sensor info failed -19
[ 15.523012] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523016] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.523017] rkcif_scale_ch0: update sensor info failed -19
[ 15.523069] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523073] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.523075] rkcif_scale_ch1: update sensor info failed -19
[ 15.523126] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523130] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.523131] rkcif_scale_ch2: update sensor info failed -19
[ 15.523182] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523187] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.523188] rkcif_scale_ch3: update sensor info failed -19
[ 15.523238] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523243] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.523244] rkcif_tools_id0: update sensor info failed -19
[ 15.523296] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523300] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.523301] rkcif_tools_id1: update sensor info failed -19
[ 15.523353] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.523358] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.523359] rkcif_tools_id2: update sensor info failed -19
[ 15.523413] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523425] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.523426] stream_cif_mipi_id0: update sensor info failed -19
[ 15.523479] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523497] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.523498] stream_cif_mipi_id1: update sensor info failed -19
[ 15.523553] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523562] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.523567] stream_cif_mipi_id2: update sensor info failed -19
[ 15.523623] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523631] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.523637] stream_cif_mipi_id3: update sensor info failed -19
[ 15.523697] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523704] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.523711] rkcif_scale_ch0: update sensor info failed -19
[ 15.523760] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523765] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.523766] rkcif_scale_ch1: update sensor info failed -19
[ 15.523818] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523822] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.523824] rkcif_scale_ch2: update sensor info failed -19
[ 15.523878] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523882] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.523885] rkcif_scale_ch3: update sensor info failed -19
[ 15.523936] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523941] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.523942] rkcif_tools_id0: update sensor info failed -19
[ 15.523995] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.523999] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.524000] rkcif_tools_id1: update sensor info failed -19
[ 15.524053] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.524061] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.524065] rkcif_tools_id2: update sensor info failed -19
[ 15.528585] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528603] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.528605] stream_cif_mipi_id0: update sensor info failed -19
[ 15.528667] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528672] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.528673] stream_cif_mipi_id1: update sensor info failed -19
[ 15.528728] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528733] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.528735] rkcif_tools_id2: update sensor info failed -19
[ 15.528790] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528795] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.528796] stream_cif_mipi_id2: update sensor info failed -19
[ 15.528864] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528869] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.528870] stream_cif_mipi_id3: update sensor info failed -19
[ 15.528933] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.528938] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.528943] rkcif_scale_ch0: update sensor info failed -19
[ 15.528997] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529001] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.529002] rkcif_scale_ch1: update sensor info failed -19
[ 15.529053] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529057] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.529058] rkcif_scale_ch2: update sensor info failed -19
[ 15.529110] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529114] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.529115] rkcif_scale_ch3: update sensor info failed -19
[ 15.529166] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529182] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.529184] rkcif_tools_id0: update sensor info failed -19
[ 15.529250] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529254] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.529256] rkcif_tools_id1: update sensor info failed -19
[ 15.529310] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529324] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.529324] stream_cif_mipi_id0: update sensor info failed -19
[ 15.529378] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529383] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.529384] stream_cif_mipi_id1: update sensor info failed -19
[ 15.529435] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529439] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.529440] stream_cif_mipi_id2: update sensor info failed -19
[ 15.529491] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529495] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.529497] stream_cif_mipi_id3: update sensor info failed -19
[ 15.529549] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529553] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.529554] rkcif_scale_ch0: update sensor info failed -19
[ 15.529606] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529610] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.529611] rkcif_scale_ch1: update sensor info failed -19
[ 15.529662] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529666] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.529667] rkcif_scale_ch2: update sensor info failed -19
[ 15.529718] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529723] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.529724] rkcif_scale_ch3: update sensor info failed -19
[ 15.529774] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529779] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.529780] rkcif_tools_id0: update sensor info failed -19
[ 15.529832] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529837] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.529838] rkcif_tools_id1: update sensor info failed -19
[ 15.529889] rockchip-csi2-dphy1: No link between dphy and sensor
[ 15.529893] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.529894] rkcif_tools_id2: update sensor info failed -19
[ 15.529951] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.529965] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.529967] stream_cif_mipi_id0: update sensor info failed -19
[ 15.530019] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530024] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.530025] stream_cif_mipi_id1: update sensor info failed -19
[ 15.530078] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530082] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.530084] stream_cif_mipi_id2: update sensor info failed -19
[ 15.530135] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530142] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.530143] stream_cif_mipi_id3: update sensor info failed -19
[ 15.530213] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530225] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.530233] rkcif_scale_ch0: update sensor info failed -19
[ 15.530289] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530297] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.530303] rkcif_scale_ch1: update sensor info failed -19
[ 15.530359] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530368] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.530377] rkcif_scale_ch2: update sensor info failed -19
[ 15.530429] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530433] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.530435] rkcif_scale_ch3: update sensor info failed -19
[ 15.530487] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530491] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.530492] rkcif_tools_id0: update sensor info failed -19
[ 15.530543] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530547] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.530548] rkcif_tools_id1: update sensor info failed -19
[ 15.530601] rockchip-csi2-dphy0: No link between dphy and sensor
[ 15.530605] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.530606] rkcif_tools_id2: update sensor info failed -19
[ 15.530660] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530675] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.530679] stream_cif_mipi_id0: update sensor info failed -19
[ 15.530735] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530741] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.530745] stream_cif_mipi_id1: update sensor info failed -19
[ 15.530796] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530800] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.530801] stream_cif_mipi_id2: update sensor info failed -19
[ 15.530854] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530858] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.530859] stream_cif_mipi_id3: update sensor info failed -19
[ 15.530913] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530917] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.530918] rkcif_scale_ch0: update sensor info failed -19
[ 15.530971] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.530975] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.530976] rkcif_scale_ch1: update sensor info failed -19
[ 15.531027] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.531032] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.531033] rkcif_scale_ch2: update sensor info failed -19
[ 15.531085] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.531093] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.531095] rkcif_scale_ch3: update sensor info failed -19
[ 15.531146] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.531152] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.531153] rkcif_tools_id0: update sensor info failed -19
[ 15.531205] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.531210] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.531214] rkcif_tools_id1: update sensor info failed -19
[ 15.531266] rockchip-csi2-dphy4: No link between dphy and sensor
[ 15.531271] rkcif-mipi-lvds4: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.531272] rkcif_tools_id2: update sensor info failed -19
[ 15.531328] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531340] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.531341] stream_cif_mipi_id0: update sensor info failed -19
[ 15.531397] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531402] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.531403] stream_cif_mipi_id1: update sensor info failed -19
[ 15.531454] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531458] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.531459] stream_cif_mipi_id2: update sensor info failed -19
[ 15.531510] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531515] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.531516] stream_cif_mipi_id3: update sensor info failed -19
[ 15.531568] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531572] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.531573] rkcif_scale_ch0: update sensor info failed -19
[ 15.531626] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531630] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.531631] rkcif_scale_ch1: update sensor info failed -19
[ 15.531683] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531687] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.531688] rkcif_scale_ch2: update sensor info failed -19
[ 15.531739] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531743] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[ 15.531744] rkcif_scale_ch3: update sensor info failed -19
[ 15.531796] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531800] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[ 15.531801] rkcif_tools_id0: update sensor info failed -19
[ 15.531861] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531865] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[ 15.531866] rkcif_tools_id1: update sensor info failed -19
[ 15.531922] rockchip-csi2-dphy5: No link between dphy and sensor
[ 15.531926] rkcif-mipi-lvds5: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[ 15.531928] rkcif_tools_id2: update sensor info failed -19
[ 15.654920] mali fb000000.gpu: Loading Mali firmware 0x1010000
[ 15.656603] mali fb000000.gpu: Mali firmware git_sha: ee476db42870778306fa8d559a605a73f13e455c
[ 16.045451] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.062199] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.078875] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.095533] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.112195] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.128866] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.145530] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.162206] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.178871] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.195537] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.212205] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.228869] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.245529] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.262205] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.656519] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.728938] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 16.745490] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 17.900288] Freeing drm_logo memory: 1408K
[ 18.970561] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
[ 20.161379] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[ 20.572118] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.572153] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
root@ok3588:~#
[END] 2024/8/23 20:37:09