Android kernel 配置docker

levengeo2024-09-07 8:38

修改配置

c 复制代码 
vim common/arch/arm64/configs/xxx_defconfig
CONFIG_NAMESPACES=y
CONFIG_NET_NS=y
CONFIG_PID_NS=y
CONFIG_IPC_NS=y
CONFIG_UTS_NS=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_SCHED=y
CONFIG_CPUSETS=y
CONFIG_MEMCG=y
CONFIG_KEYS=y
CONFIG_VETH=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_NETFILTER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MARK=y
CONFIG_IP_NF_NAT=y
CONFIG_NF_NAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_CGROUP_BPF=y
CONFIG_USER_NS=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_CGROUP_PIDS=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_VS=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_RR=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_VXLAN=y CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_CRYPTO=y CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_GHASH=y CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_ALGO=y
CONFIG_INET_ESP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_IPVLAN=y
CONFIG_MACVLAN=y
CONFIG_DUMMY=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_AUFS_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_OVERLAY_FS=y

编译内核烧录

检测脚本

c 复制代码 
#!/usr/bin/env sh
set -e

EXITCODE=0

# bits of this were adapted from lxc-checkconfig
# see also https://github.com/lxc/lxc/blob/lxc-1.0.2/src/lxc/lxc-checkconfig.in

possibleConfigs="
	/proc/config.gz
	/boot/config-$(uname -r)
	/usr/src/linux-$(uname -r)/.config
	/usr/src/linux/.config
"

if [ $# -gt 0 ]; then
	CONFIG="$1"
else
	: "${CONFIG:=/proc/config.gz}"
fi

if ! command -v zgrep > /dev/null 2>&1; then
	zgrep() {
		zcat "$2" | grep "$1"
	}
fi

useColor=true
if [ "$NO_COLOR" = "1" ] || [ ! -t 1 ]; then
	useColor=false
fi
kernelVersion="$(uname -r)"
kernelMajor="${kernelVersion%%.*}"
kernelMinor="${kernelVersion#$kernelMajor.}"
kernelMinor="${kernelMinor%%.*}"

is_set() {
	zgrep "CONFIG_$1=[y|m]" "$CONFIG" > /dev/null
}
is_set_in_kernel() {
	zgrep "CONFIG_$1=y" "$CONFIG" > /dev/null
}
is_set_as_module() {
	zgrep "CONFIG_$1=m" "$CONFIG" > /dev/null
}

color() {
	# if stdout is not a terminal, then don't do color codes.
	if [ "$useColor" = "false" ]; then
		return 0
	fi
	codes=
	if [ "$1" = 'bold' ]; then
		codes='1'
		shift
	fi
	if [ "$#" -gt 0 ]; then
		code=
		case "$1" in
			# see https://en.wikipedia.org/wiki/ANSI_escape_code#Colors
			black) code=30 ;;
			red) code=31 ;;
			green) code=32 ;;
			yellow) code=33 ;;
			blue) code=34 ;;
			magenta) code=35 ;;
			cyan) code=36 ;;
			white) code=37 ;;
		esac
		if [ "$code" ]; then
			codes="${codes:+$codes;}$code"
		fi
	fi
	printf '\033[%sm' "$codes"
}
wrap_color() {
	text="$1"
	shift
	color "$@"
	printf '%s' "$text"
	color reset
	echo
}

wrap_good() {
	echo "$(wrap_color "$1" white): $(wrap_color "$2" green)"
}
wrap_bad() {
	echo "$(wrap_color "$1" bold): $(wrap_color "$2" bold red)"
}
wrap_warning() {
	wrap_color >&2 "$*" red
}

check_flag() {
	if is_set_in_kernel "$1"; then
		wrap_good "CONFIG_$1" 'enabled'
	elif is_set_as_module "$1"; then
		wrap_good "CONFIG_$1" 'enabled (as module)'
	else
		wrap_bad "CONFIG_$1" 'missing'
		EXITCODE=1
	fi
}

check_flags() {
	for flag in "$@"; do
		printf -- '- '
		check_flag "$flag"
	done
}

check_command() {
	if command -v "$1" > /dev/null 2>&1; then
		wrap_good "$1 command" 'available'
	else
		wrap_bad "$1 command" 'missing'
		EXITCODE=1
	fi
}

check_device() {
	if [ -c "$1" ]; then
		wrap_good "$1" 'present'
	else
		wrap_bad "$1" 'missing'
		EXITCODE=1
	fi
}

if [ ! -e "$CONFIG" ]; then
	wrap_warning "warning: $CONFIG does not exist, searching other paths for kernel config ..."
	for tryConfig in $possibleConfigs; do
		if [ -e "$tryConfig" ]; then
			CONFIG="$tryConfig"
			break
		fi
	done
	if [ ! -e "$CONFIG" ]; then
		wrap_warning "error: cannot find kernel config"
		wrap_warning "  try running this script again, specifying the kernel config:"
		wrap_warning "    CONFIG=/path/to/kernel/.config $0 or $0 /path/to/kernel/.config"
		exit 1
	fi
fi

wrap_color "info: reading kernel config from $CONFIG ..." white
echo

echo 'Generally Necessary:'

printf -- '- '
if [ "$(stat -f -c %t /sys/fs/cgroup 2> /dev/null)" = '63677270' ]; then
	wrap_good 'cgroup hierarchy' 'cgroupv2'
	cgroupv2ControllerFile='/sys/fs/cgroup/cgroup.controllers'
	if [ -f "$cgroupv2ControllerFile" ]; then
		echo '  Controllers:'
		for controller in cpu cpuset io memory pids; do
			if grep -qE '(^| )'"$controller"'($| )' "$cgroupv2ControllerFile"; then
				echo "  - $(wrap_good "$controller" 'available')"
			else
				echo "  - $(wrap_bad "$controller" 'missing')"
			fi
		done
	else
		wrap_bad "$cgroupv2ControllerFile" 'nonexistent??'
	fi
	# TODO find an efficient way to check if cgroup.freeze exists in subdir
else
	cgroupSubsystemDir="$(sed -rne '/^[^ ]+ ([^ ]+) cgroup ([^ ]*,)?(cpu|cpuacct|cpuset|devices|freezer|memory)[, ].*$/ { s//\1/p; q }' /proc/mounts)"
	cgroupDir="$(dirname "$cgroupSubsystemDir")"
	if [ -d "$cgroupDir/cpu" ] || [ -d "$cgroupDir/cpuacct" ] || [ -d "$cgroupDir/cpuset" ] || [ -d "$cgroupDir/devices" ] || [ -d "$cgroupDir/freezer" ] || [ -d "$cgroupDir/memory" ]; then
		echo "$(wrap_good 'cgroup hierarchy' 'properly mounted') [$cgroupDir]"
	else
		if [ "$cgroupSubsystemDir" ]; then
			echo "$(wrap_bad 'cgroup hierarchy' 'single mountpoint!') [$cgroupSubsystemDir]"
		else
			wrap_bad 'cgroup hierarchy' 'nonexistent??'
		fi
		EXITCODE=1
		echo "    $(wrap_color '(see https://github.com/tianon/cgroupfs-mount)' yellow)"
	fi
fi

if [ "$(cat /sys/module/apparmor/parameters/enabled 2> /dev/null)" = 'Y' ]; then
	printf -- '- '
	if command -v apparmor_parser > /dev/null 2>&1; then
		wrap_good 'apparmor' 'enabled and tools installed'
	else
		wrap_bad 'apparmor' 'enabled, but apparmor_parser missing'
		printf '    '
		if command -v apt-get > /dev/null 2>&1; then
			wrap_color '(use "apt-get install apparmor" to fix this)'
		elif command -v yum > /dev/null 2>&1; then
			wrap_color '(your best bet is "yum install apparmor-parser")'
		else
			wrap_color '(look for an "apparmor" package for your distribution)'
		fi
		EXITCODE=1
	fi
fi

check_flags \
	NAMESPACES NET_NS PID_NS IPC_NS UTS_NS \
	CGROUPS CGROUP_CPUACCT CGROUP_DEVICE CGROUP_FREEZER CGROUP_SCHED CPUSETS MEMCG \
	KEYS \
	VETH BRIDGE BRIDGE_NETFILTER \
	IP_NF_FILTER IP_NF_MANGLE IP_NF_TARGET_MASQUERADE \
	NETFILTER_XT_MATCH_ADDRTYPE \
	NETFILTER_XT_MATCH_CONNTRACK \
	NETFILTER_XT_MATCH_IPVS \
	NETFILTER_XT_MARK \
	IP_NF_NAT NF_NAT \
	POSIX_MQUEUE
# (POSIX_MQUEUE is required for bind-mounting /dev/mqueue into containers)

if [ "$kernelMajor" -lt 4 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -lt 8 ]); then
	check_flags DEVPTS_MULTIPLE_INSTANCES
fi

if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 1 ]; then
	check_flags NF_NAT_IPV4
fi

if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 2 ]; then
	check_flags NF_NAT_NEEDED
fi
# check availability of BPF_CGROUP_DEVICE support
if [ "$kernelMajor" -ge 5 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -ge 15 ]); then
	check_flags CGROUP_BPF
fi

echo

echo 'Optional Features:'
{
	check_flags USER_NS
}
{
	check_flags SECCOMP
	check_flags SECCOMP_FILTER
}
{
	check_flags CGROUP_PIDS
}
{
	check_flags MEMCG_SWAP
	# Kernel v5.8+ removes MEMCG_SWAP_ENABLED.
	if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 8 ]; then
		CODE=${EXITCODE}
		check_flags MEMCG_SWAP_ENABLED
		# FIXME this check is cgroupv1-specific
		if [ -e /sys/fs/cgroup/memory/memory.memsw.limit_in_bytes ]; then
			echo "    $(wrap_color '(cgroup swap accounting is currently enabled)' bold black)"
			EXITCODE=${CODE}
		elif is_set MEMCG_SWAP && ! is_set MEMCG_SWAP_ENABLED; then
			echo "    $(wrap_color '(cgroup swap accounting is currently not enabled, you can enable it by setting boot option "swapaccount=1")' bold black)"
		fi
	else
		# Kernel v5.8+ enables swap accounting by default.
		echo "    $(wrap_color '(cgroup swap accounting is currently enabled)' bold black)"
	fi
}
{
	if is_set LEGACY_VSYSCALL_NATIVE; then
		printf -- '- '
		wrap_bad "CONFIG_LEGACY_VSYSCALL_NATIVE" 'enabled'
		echo "    $(wrap_color '(dangerous, provides an ASLR-bypassing target with usable ROP gadgets.)' bold black)"
	elif is_set LEGACY_VSYSCALL_EMULATE; then
		printf -- '- '
		wrap_good "CONFIG_LEGACY_VSYSCALL_EMULATE" 'enabled'
	elif is_set LEGACY_VSYSCALL_NONE; then
		printf -- '- '
		wrap_bad "CONFIG_LEGACY_VSYSCALL_NONE" 'enabled'
		echo "    $(wrap_color '(containers using eglibc <= 2.13 will not work. Switch to' bold black)"
		echo "    $(wrap_color ' "CONFIG_VSYSCALL_[NATIVE|EMULATE]" or use "vsyscall=[native|emulate]"' bold black)"
		echo "    $(wrap_color ' on kernel command line. Note that this will disable ASLR for the,' bold black)"
		echo "    $(wrap_color ' VDSO which may assist in exploiting security vulnerabilities.)' bold black)"
	# else Older kernels (prior to 3dc33bd30f3e, released in v4.40-rc1) do
	#      not have these LEGACY_VSYSCALL options and are effectively
	#      LEGACY_VSYSCALL_EMULATE. Even older kernels are presumably
	#      effectively LEGACY_VSYSCALL_NATIVE.
	fi
}

if [ "$kernelMajor" -lt 4 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -le 5 ]); then
	check_flags MEMCG_KMEM
fi

if [ "$kernelMajor" -lt 3 ] || ([ "$kernelMajor" -eq 3 ] && [ "$kernelMinor" -le 18 ]); then
	check_flags RESOURCE_COUNTERS
fi

if [ "$kernelMajor" -lt 3 ] || ([ "$kernelMajor" -eq 3 ] && [ "$kernelMinor" -le 13 ]); then
	netprio=NETPRIO_CGROUP
else
	netprio=CGROUP_NET_PRIO
fi

if [ "$kernelMajor" -lt 5 ]; then
	check_flags IOSCHED_CFQ CFQ_GROUP_IOSCHED
fi

check_flags \
	BLK_CGROUP BLK_DEV_THROTTLING \
	CGROUP_PERF \
	CGROUP_HUGETLB \
	NET_CLS_CGROUP $netprio \
	CFS_BANDWIDTH FAIR_GROUP_SCHED \
	IP_NF_TARGET_REDIRECT \
	IP_VS \
	IP_VS_NFCT \
	IP_VS_PROTO_TCP \
	IP_VS_PROTO_UDP \
	IP_VS_RR \
	SECURITY_SELINUX \
	SECURITY_APPARMOR

if ! is_set EXT4_USE_FOR_EXT2; then
	check_flags EXT3_FS EXT3_FS_XATTR EXT3_FS_POSIX_ACL EXT3_FS_SECURITY
	if ! is_set EXT3_FS || ! is_set EXT3_FS_XATTR || ! is_set EXT3_FS_POSIX_ACL || ! is_set EXT3_FS_SECURITY; then
		echo "    $(wrap_color '(enable these ext3 configs if you are using ext3 as backing filesystem)' bold black)"
	fi
fi

check_flags EXT4_FS EXT4_FS_POSIX_ACL EXT4_FS_SECURITY
if ! is_set EXT4_FS || ! is_set EXT4_FS_POSIX_ACL || ! is_set EXT4_FS_SECURITY; then
	if is_set EXT4_USE_FOR_EXT2; then
		echo "    $(wrap_color 'enable these ext4 configs if you are using ext3 or ext4 as backing filesystem' bold black)"
	else
		echo "    $(wrap_color 'enable these ext4 configs if you are using ext4 as backing filesystem' bold black)"
	fi
fi

echo '- Network Drivers:'
echo "  - \"$(wrap_color 'overlay' blue)\":"
check_flags VXLAN BRIDGE_VLAN_FILTERING | sed 's/^/    /'
echo '      Optional (for encrypted networks):'
check_flags CRYPTO CRYPTO_AEAD CRYPTO_GCM CRYPTO_SEQIV CRYPTO_GHASH \
	XFRM XFRM_USER XFRM_ALGO INET_ESP NETFILTER_XT_MATCH_BPF | sed 's/^/      /'
if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 3 ]; then
	check_flags INET_XFRM_MODE_TRANSPORT | sed 's/^/      /'
fi
echo "  - \"$(wrap_color 'ipvlan' blue)\":"
check_flags IPVLAN | sed 's/^/    /'
echo "  - \"$(wrap_color 'macvlan' blue)\":"
check_flags MACVLAN DUMMY | sed 's/^/    /'
echo "  - \"$(wrap_color 'ftp,tftp client in container' blue)\":"
check_flags NF_NAT_FTP NF_CONNTRACK_FTP NF_NAT_TFTP NF_CONNTRACK_TFTP | sed 's/^/    /'

# only fail if no storage drivers available
CODE=${EXITCODE}
EXITCODE=0
STORAGE=1

echo '- Storage Drivers:'
echo "  - \"$(wrap_color 'btrfs' blue)\":"
check_flags BTRFS_FS | sed 's/^/    /'
check_flags BTRFS_FS_POSIX_ACL | sed 's/^/    /'
[ "$EXITCODE" = 0 ] && STORAGE=0
EXITCODE=0

echo "  - \"$(wrap_color 'overlay' blue)\":"
check_flags OVERLAY_FS | sed 's/^/    /'
[ "$EXITCODE" = 0 ] && STORAGE=0
EXITCODE=0

echo "  - \"$(wrap_color 'zfs' blue)\":"
printf '    - '
check_device /dev/zfs
printf '    - '
check_command zfs
printf '    - '
check_command zpool
[ "$EXITCODE" = 0 ] && STORAGE=0
EXITCODE=0

EXITCODE=$CODE
[ "$STORAGE" = 1 ] && EXITCODE=1

echo

check_limit_over() {
	if [ "$(cat "$1")" -le "$2" ]; then
		wrap_bad "- $1" "$(cat "$1")"
		wrap_color "    This should be set to at least $2, for example set: sysctl -w kernel/keys/root_maxkeys=1000000" bold black
		EXITCODE=1
	else
		wrap_good "- $1" "$(cat "$1")"
	fi
}

echo 'Limits:'
check_limit_over /proc/sys/kernel/keys/root_maxkeys 10000
echo

exit $EXITCODE

检测结果

c 复制代码 
Generally Necessary:
--cgroup hierarchy: cgroupv2
  Controllers:
  - cpu: missing
  - cpuset: missing
  - io: missing
  - memory: missing
  - pids: available
--CONFIG_NAMESPACES: enabled
--CONFIG_NET_NS: enabled
--CONFIG_PID_NS: enabled
--CONFIG_IPC_NS: enabled
--CONFIG_UTS_NS: enabled
--CONFIG_CGROUPS: enabled
--CONFIG_CGROUP_CPUACCT: enabled
--CONFIG_CGROUP_DEVICE: enabled
--CONFIG_CGROUP_FREEZER: enabled
--CONFIG_CGROUP_SCHED: enabled
--CONFIG_CPUSETS: enabled
--CONFIG_MEMCG: enabled
--CONFIG_KEYS: enabled
--CONFIG_VETH: enabled
--CONFIG_BRIDGE: enabled
--CONFIG_BRIDGE_NETFILTER: enabled
--CONFIG_IP_NF_FILTER: enabled
--CONFIG_IP_NF_MANGLE: enabled
--CONFIG_IP_NF_TARGET_MASQUERADE: enabled
--CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled
--CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled
--CONFIG_NETFILTER_XT_MATCH_IPVS: enabled
--CONFIG_NETFILTER_XT_MARK: enabled
--CONFIG_IP_NF_NAT: enabled
--CONFIG_NF_NAT: enabled
--CONFIG_POSIX_MQUEUE: enabled
--CONFIG_CGROUP_BPF: enabled

Optional Features:
--CONFIG_USER_NS: enabled
--CONFIG_SECCOMP: enabled
--CONFIG_SECCOMP_FILTER: enabled
--CONFIG_CGROUP_PIDS: enabled
--CONFIG_MEMCG_SWAP: enabled
    (cgroup swap accounting is currently enabled)
--CONFIG_BLK_CGROUP: enabled
--CONFIG_BLK_DEV_THROTTLING: enabled
--CONFIG_CGROUP_PERF: enabled
--CONFIG_CGROUP_HUGETLB: missing
--CONFIG_NET_CLS_CGROUP: enabled
--CONFIG_CGROUP_NET_PRIO: enabled
--CONFIG_CFS_BANDWIDTH: enabled
--CONFIG_FAIR_GROUP_SCHED: enabled
--CONFIG_IP_NF_TARGET_REDIRECT: enabled
--CONFIG_IP_VS: enabled
--CONFIG_IP_VS_NFCT: enabled
--CONFIG_IP_VS_PROTO_TCP: enabled
--CONFIG_IP_VS_PROTO_UDP: enabled
--CONFIG_IP_VS_RR: enabled
--CONFIG_SECURITY_SELINUX: enabled
--CONFIG_SECURITY_APPARMOR: enabled
--CONFIG_EXT4_FS: enabled
--CONFIG_EXT4_FS_POSIX_ACL: enabled
--CONFIG_EXT4_FS_SECURITY: enabled
- Network Drivers:
  - "overlay":
    --CONFIG_VXLAN: enabled
    --CONFIG_BRIDGE_VLAN_FILTERING: missing
      Optional (for encrypted networks):
      --CONFIG_CRYPTO: enabled
      --CONFIG_CRYPTO_AEAD: enabled
      --CONFIG_CRYPTO_GCM: enabled
      --CONFIG_CRYPTO_SEQIV: enabled
      --CONFIG_CRYPTO_GHASH: enabled
      --CONFIG_XFRM: enabled
      --CONFIG_XFRM_USER: enabled
      --CONFIG_XFRM_ALGO: enabled
      --CONFIG_INET_ESP: enabled
      --CONFIG_NETFILTER_XT_MATCH_BPF: enabled
  - "ipvlan":
    --CONFIG_IPVLAN: enabled
  - "macvlan":
    --CONFIG_MACVLAN: enabled
    --CONFIG_DUMMY: enabled
  - "ftp,tftp client in container":
    --CONFIG_NF_NAT_FTP: enabled
    --CONFIG_NF_CONNTRACK_FTP: enabled
    --CONFIG_NF_NAT_TFTP: enabled
    --CONFIG_NF_CONNTRACK_TFTP: enabled
- Storage Drivers:
  - "btrfs":
    --CONFIG_BTRFS_FS: enabled
    --CONFIG_BTRFS_FS_POSIX_ACL: enabled
  - "overlay":
    --CONFIG_OVERLAY_FS: enabled
  - "zfs":
    - /dev/zfs: missing
    - zfs command: missing
    - zpool command: missing
相关推荐
长亭外的少年4 小时前
Kotlin 编译失败问题及解决方案：从守护进程到 Gradle 配置
android·开发语言·kotlin
意疏6 小时前
【Linux 篇】Docker 的容器之海与镜像之岛：于 Linux 系统内探索容器化的奇妙航行
linux·docker
墨鸦_Cormorant6 小时前
使用docker快速部署Nginx、Redis、MySQL、Tomcat以及制作镜像
redis·nginx·docker
Code_Artist6 小时前
Docker镜像加速解决方案：配置HTTP代理，让Docker学会科学上网！
docker·云原生·容器
建群新人小猿6 小时前
会员等级经验问题
android·开发语言·前端·javascript·php
1024小神7 小时前
tauri2.0版本开发苹果ios和安卓android应用，环境搭建和最后编译为apk
android·ios·tauri
wanmei0028 小时前
Dockerfile复制目录进入镜像里
docker
兰琛8 小时前
20241121 android中树结构列表（使用recyclerView实现）
android·gitee
inter_peng8 小时前
[Docker-显示所有容器IP] 显示docker-compose.yml中所有容器IP的方法
tcp/ip·docker·eureka
Linux运维日记8 小时前
k8s1.31版本最新版本集群使用容器镜像仓库Harbor
linux·docker·云原生·容器·kubernetes
热门推荐
01(欧拉)openEuler系统添加网卡文件配置流程、(欧拉)openEuler系统手动配置ipv6地址流程、(欧拉)openEuler系统网络管理说明02PyTorch机器学习实现液态神经网络03【HarmonyOS】HUAWEI DevEco Studio 下载地址汇总04玄机平台应急响应—webshell查杀05Coze扣子平台完整体验和实践（附国内和国际版对比）06Ubuntu 20.04使用Livox mid 360 测试 FAST_LIO07【目标跟踪】相机运动补偿08Unity中PICO实现 隔空取物 和 接触抓取物体09RAG 实践- Ollama+RagFlow 部署本地知识库10怎样让音频速度变慢？请跟随以下方法进行操作