# CentOS-Stream-BaseOS.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[baseos]
name=CentOS Stream $releasever - BaseOS
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=BaseOS&infra=$infra
baseurl=http://mirrors.tencentyun.com/$contentdir/$stream/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
2.CentOS-Stream-AppStream.repo
perl复制代码
# CentOS-Stream-AppStream.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[appstream]
name=CentOS Stream $releasever - AppStream
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=AppStream&infra=$infra
baseurl=http://mirrors.tencentyun.com/$contentdir/$stream/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
exclude=cloud-init
3.CentOS-Stream-HighAvailability.repo
perl复制代码
# CentOS-Stream-HighAvailability.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[ha]
name=CentOS Stream $releasever - HighAvailability
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=HighAvailability&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
4.CentOS-Stream-RealTime.repo
perl复制代码
# CentOS-Stream-RealTime.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[rt]
name=CentOS Stream $releasever - RealTime
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=RT&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/RT/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
5.CentOS-Stream-Media.repo
perl复制代码
# CentOS-Stream-Media.repo
#
# You can use this repo to install items directly off the installation media.
# Verify your mount point matches one of the below file:// paths.
[media-baseos]
name=CentOS Stream $releasever - Media - BaseOS
baseurl=file:///media/CentOS/BaseOS
file:///media/cdrom/BaseOS
file:///media/cdrecorder/BaseOS
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[media-appstream]
name=CentOS Stream $releasever - Media - AppStream
baseurl=file:///media/CentOS/AppStream
file:///media/cdrom/AppStream
file:///media/cdrecorder/AppStream
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
6.CentOS-Stream-ResilientStorage.repo
perl复制代码
# CentOS-Stream-ResilientStorage.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[resilientstorage]
name=CentOS Stream $releasever - ResilientStorage
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=ResilientStorage&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
7.CentOS-Stream-Debuginfo.repo
perl复制代码
# CentOS-Stream-Debuginfo.repo
#
# All debug packages are merged into a single repo, split by basearch, and are
# not signed.
[debuginfo]
name=CentOS Stream $releasever - Debuginfo
baseurl=http://debuginfo.centos.org/$stream/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
8.CentOS-Stream-PowerTools.repo
perl复制代码
# CentOS-Stream-PowerTools.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[powertools]
name=CentOS Stream $releasever - PowerTools
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=PowerTools&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/PowerTools/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial