3572_a16_3566_A11_A9等解决机器接电池或者插DC电源上电的时候不要立马开机，要通过电源按键按下之后才开机

liu_sir_2026-08-09 17:03

3566_A19 解决机器接电池或者插DC电源上电的时候不要立马开机，要通过电源按键按下之后才开机

diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

index fb47c15..4bbc4d1 100644

--- a/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

@@ -323,6 +323,9 @@

pmic-reset-func = <0>;

/* not save the PMIC_POWER_EN register in uboot */

not-save-power-en = <1>;

  • /* XHF CUSTOM shutdown VSYS (VCC3V3_SYS) in PWR_OFF mode,

  • * so VDC divider loses power -> no auto power-on after poweroff */

  • vsys-off-shutdown;

vcc1-supply = <&vcc3v3_sys>;

vcc2-supply = <&vcc3v3_sys>;

diff --git a/u-boot/drivers/power/pmic/rk8xx.c b/u-boot/drivers/power/pmic/rk8xx.c

index 64c48f8..0b858f7 100644

--- a/u-boot/drivers/power/pmic/rk8xx.c

+++ b/u-boot/drivers/power/pmic/rk8xx.c

@@ -834,6 +834,42 @@ static int rk8xx_probe(struct udevice *dev)

}

printf("\n");

  • /* ============================================================

  • * XHF CUSTOM Power-on source gate for RK809

  • * Only allow boot when powered on by PWRON key press.

  • * - ON_SOURCE(0xF5) bit7 (0x80): PWRON key -> boot normally

  • * - ON_SOURCE(0xF5) bit6 (0x40): PLUG_IN -> shutdown

  • * (DC/battery plugged in triggers auto power-on)

  • * - Verified by experiment 2026-08-07:

  • * power key boot -> 0x80, DC plug boot -> 0x40

  • * Runs after PMIC init (I2C ready). pmic_shutdown() triggers

  • * DEV_OFF; PMIC powers off all rails -> CPU dies here.

  • * ============================================================ */

  • if (on_source && off_source &&

  • device_is_compatible(dev, "rockchip,rk809")) {

  • uint8_t on_val = 0;

  • ret = rk8xx_read(dev, on_source, &on_val, 1);

  • if (ret) {

  • printf("%s: read ON_SOURCE(0x%02x) failed, ret=%d\n",

  • func, on_source, ret);

  • } else {

  • /* Only PWRON key (bit7) is allowed to boot */

  • if (!(on_val & 0x80)) {

  • printf("PMIC: on=0x%02x (no PWRON key), power off!\n",

  • on_val);

  • pmic_shutdown(dev);

  • /* pmic_shutdown() should not return.

  • * If it does, stall here instead of booting. */

  • while (1)

  • ;

  • } else {

  • printf("PMIC: on=0x%02x (PWRON key), boot OK\n",

  • on_val);

  • }

  • }

  • }

if (pwron_key) {

ret = rk8xx_read(dev, pwron_key, &value, 1);

if (ret)

3566_A11解决机器接电池或者插DC电源上电的时候不要立马开机，要通过电源按键按下之后才开机

diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

index f91deb8..6e2a598 100644

--- a/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3566-box-demo-v10.dtsi

@@ -246,6 +246,9 @@

pmic-reset-func = <0>;

/* not save the PMIC_POWER_EN register in uboot */

not-save-power-en = <1>;

  • /* XHF CUSTOM shutdown VSYS (VCC3V3_SYS) in PWR_OFF mode,

  • * so VDC divider loses power -> no auto power-on after poweroff */

  • vsys-off-shutdown;

vcc1-supply = <&vcc3v3_sys>;

vcc2-supply = <&vcc3v3_sys>;

diff --git a/u-boot/drivers/power/pmic/rk8xx.c b/u-boot/drivers/power/pmic/rk8xx.c

index e361015..9eb1b95 100644

--- a/u-boot/drivers/power/pmic/rk8xx.c

+++ b/u-boot/drivers/power/pmic/rk8xx.c

@@ -408,6 +408,10 @@ static int rk8xx_ofdata_to_platdata(struct udevice *dev)

val = dev_read_u32_default(dev, "not-save-power-en", 0);

rk8xx->not_save_power_en = val;

  • /* XHF CUSTOM vsys-off-shutdown: power off VSYS in PWR_OFF mode

  • * (prevents auto power-on ~5min after software poweroff) */

  • rk8xx->sys_can_sd = dev_read_bool(dev, "vsys-off-shutdown");

return 0;

}

@@ -541,6 +545,26 @@ static int rk8xx_probe(struct udevice *dev)

lp_act_msk = RK8XX_LP_ACTION_MSK;

init_data = rk817_init_reg;

init_data_num = ARRAY_SIZE(rk817_init_reg);

  • /* XHF CUSTOM whether the system voltage can be shutdown in PWR_off mode */

  • if (priv->sys_can_sd) {

  • ret = rk8xx_read(dev, RK817_PMIC_CHRG_TERM, &value, 1);

  • if (ret)

  • return ret;

  • value |= 0x80;

  • ret = rk8xx_write(dev, RK817_PMIC_CHRG_TERM, &value, 1);

  • if (ret)

  • return ret;

  • } else {

  • ret = rk8xx_read(dev, RK817_PMIC_CHRG_TERM, &value, 1);

  • if (ret)

  • return ret;

  • value &= 0x7f;

  • ret = rk8xx_write(dev, RK817_PMIC_CHRG_TERM, &value, 1);

  • if (ret)

  • return ret;

  • }

/* judge whether save the PMIC_POWER_EN register */

if (priv->not_save_power_en)

break;

@@ -601,6 +625,42 @@ static int rk8xx_probe(struct udevice *dev)

}

printf("\n");

  • /* ============================================================

  • * XHF CUSTOM Power-on source gate for RK809

  • * Only allow boot when powered on by PWRON key press.

  • * - ON_SOURCE(0xF5) bit7 (0x80): PWRON key -> boot normally

  • * - ON_SOURCE(0xF5) bit6 (0x40): PLUG_IN -> shutdown

  • * (DC/battery plugged in triggers auto power-on)

  • * - Verified by experiment 2026-08-07:

  • * power key boot -> 0x80, DC plug boot -> 0x40

  • * Runs after PMIC init (I2C ready). pmic_shutdown() triggers

  • * DEV_OFF; PMIC powers off all rails -> CPU dies here.

  • * ============================================================ */

  • if (on_source && off_source &&

  • device_is_compatible(dev, "rockchip,rk809")) {

  • uint8_t on_val = 0;

  • ret = rk8xx_read(dev, on_source, &on_val, 1);

  • if (ret) {

  • printf("%s: read ON_SOURCE(0x%02x) failed, ret=%d\n",

  • func, on_source, ret);

  • } else {

  • /* Only PWRON key (bit7) is allowed to boot */

  • if (!(on_val & 0x80)) {

  • printf("PMIC: on=0x%02x (no PWRON key), power off!\n",

  • on_val);

  • pmic_shutdown(dev);

  • /* pmic_shutdown() should not return.

  • * If it does, stall here instead of booting. */

  • while (1)

  • ;

  • } else {

  • printf("PMIC: on=0x%02x (PWRON key), boot OK\n",

  • on_val);

  • }

  • }

  • }

if (pwron_key) {

ret = rk8xx_read(dev, pwron_key, &value, 1);

if (ret)

diff --git a/u-boot/include/power/rk8xx_pmic.h b/u-boot/include/power/rk8xx_pmic.h

index aa51e88..a491835 100644

--- a/u-boot/include/power/rk8xx_pmic.h

+++ b/u-boot/include/power/rk8xx_pmic.h

@@ -209,6 +209,7 @@ enum {

#define RK817_PMIC_SYS_CFG1 0xf1

#define RK817_PMIC_SYS_CFG3 0xf4

#define RK817_GPIO_INT_CFG 0xfe

+#define RK817_PMIC_CHRG_TERM 0xe6

#define RK8XX_ON_SOURCE 0xae

#define RK8XX_OFF_SOURCE 0xaf

@@ -287,6 +288,7 @@ struct rk8xx_priv {

uint8_t sleep_pin;

uint8_t rst_fun;

int not_save_power_en;

  • int sys_can_sd;

};

int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt);

3572_a16 解决机器接电池或者插DC电源上电的时候不要立马开机，要通过电源按键按下之后才开机

diff --git a/u-boot/drivers/power/pmic/rk8xx.c b/u-boot/drivers/power/pmic/rk8xx.c

index a5e97ea..d6829c5 100755

--- a/u-boot/drivers/power/pmic/rk8xx.c

+++ b/u-boot/drivers/power/pmic/rk8xx.c

@@ -1003,6 +1003,41 @@ static int rk8xx_probe(struct udevice *dev)

}

printf("\n");

  • /* ============================================================

  • * XHF CUSTOM Power-on source gate for RK806/RK809

  • * Only allow boot when powered on by PWRON key press.

  • * - ON_SOURCE bit7 (0x80): PWRON key -> boot normally

  • * - ON_SOURCE bit6 (0x40): VDC/DC/battery plugged in -> shutdown

  • * Verified on RK3572 (RK806) 2026-08-08:

  • * DC plug boot -> 0x40, battery boot -> 0x40, PWRON -> 0x80

  • * Runs after PMIC init (I2C ready). pmic_shutdown() triggers

  • * DEV_OFF; PMIC powers off all rails -> CPU dies here.

  • * ============================================================ */

  • if (on_source && off_source &&

  • device_is_compatible(dev, "rockchip,rk806")) {

  • uint8_t on_val = 0;

  • ret = rk8xx_read(dev, on_source, &on_val, 1);

  • if (ret) {

  • printf("%s: read ON_SOURCE(0x%02x) failed, ret=%d\n",

  • func, on_source, ret);

  • } else {

  • /* Only PWRON key (bit7) is allowed to boot */

  • if (!(on_val & 0x80)) {

  • printf("PMIC: on=0x%02x (no PWRON key), power off!\n",

  • on_val);

  • pmic_shutdown(dev);

  • /* pmic_shutdown() should not return.

  • * If it does, stall here instead of booting. */

  • while (1)

  • ;

  • } else {

  • printf("PMIC: on=0x%02x (PWRON key), boot OK\n",

  • on_val);

  • }

  • }

  • }

if (pwron_key) {

ret = rk8xx_read(dev, pwron_key, &value, 1);

if (ret)

相关推荐
SelectDB26 分钟前
Doris Arrow Flight SQL 高速读取协议实战：与 Snowflake 客户端取数链路对照
大数据·数据库·数据分析
爱签AI电子合同1 小时前
电子合同全维度实测与选型指南
大数据·人工智能
AI办公探索者1 小时前
从SaaS到本地部署：大模型推理成本优化与8888元私有化方案的技术解析
大数据·人工智能
做运维的阿瑞1 小时前
云项目可观测性与成本治理：告警、日志、Dashboard 与预算标签
大数据·云原生·云计算·terraform
4SAPI2 小时前
多国产模型混合调度与企业级治理生产选型指南：4SAPI、硅基流动与 OpenRouter 的架构权衡
大数据·人工智能·架构·php
智购科技自动售货机厂家2 小时前
让AI经营自动售货机：从Project Vend看工具权限与业务规则~YH
大数据·服务器·单片机·嵌入式硬件·深度学习
数字新视界2 小时前
空调控制器AIRC800的智能化管理与应用实践
大数据·服务器·数据库·动环监控系统·动力与环境监控系统
isfox3 小时前
ReduceTask工作机制
大数据
蹄蹄4 小时前
从“一次性检测“到“年度服务“：检测机构收入结构变了，合同和应收账款也要跟着变
大数据·数据库·人工智能
YIN_尹4 小时前
【git原理与使用】git初识与安装
大数据·git·elasticsearch
热门推荐
01如何新建文件夹？ 电脑新建文件夹的4种方法02国内可直接用、免费额度/永久免费的大模型API清单（含 SiliconFlow、火山、阿里、智谱、百度、Kimi、DeepSeek、DMXAPI 等）03历年考研数学一、数学二、数学三真题试卷及答案PDF04GitHub 镜像站点05几个好用的ip纯净度检测网站06昇腾910B系列芯片完全指南：四款型号对比、服务器选型与大模型部署实战07苹果iPA游戏软件资源下载网站08蜘蛛磁力 搜索引擎大全，如何使用蜘蛛磁力查找磁力链接09CVE-2026-91403 高危漏洞预警：Java JSSE 信任链被攻破 全场景修复方案与Linux系统级彻底清理实操10微信历史版本含下载地址（ Windows PC | 安卓 | MAC ）及设置微信不更新