STM32 F103C8T6学习笔记8:0.96寸单色OLED显示屏显示字符

使用STM32F103 C8T6 驱动0.96寸单色OLED显示屏:

OLED显示屏的驱动,在设计开发中OLED显示屏十分常见,因此今日学习一下。一篇文章从程序到显示都讲通。

文章提供源码、原理解释、测试工程下载,测试效果图展示。

目录

OLED驱动原理---IIC通信:

[SSD1306 单色 0.96 OLED 显示屏特性](#SSD1306 单色 0.96 OLED 显示屏特性)

程序理解与设计:

1.操作时序---写命令、写数据:

二、清屏命令:

三、初始化SSD1306显示:

四、开启与关闭指令:

五、OLED坐标设置:

六、常用ASCLL码字符字库:

七、字符显示函数:

程序设计:

测试效果:

测试工程下载:


OLED驱动原理---IIC通信:

这里是基础原理,可以大致浏览即可,有个基本印象:

下图为 0.96寸单色OLED,他们有四个针脚:VCC GND SCK SDA

前俩个就是供电的,后俩个是IIC通信接口,与单片机通信。

SSD1306 单色 0.96 OLED 显示屏特性

  • OLED显示屏可以从最大160度的各个角度观看。
  • 该显示器支持 3v 和 5v 电源,这使得它可以与 3.3V 和 5V 逻辑一起工作。
  • SSD1306驱动程序及其库使OLED可以通过简单的命令显示字符和位图。
  • 不同颜色的 OLED 也可供选择,甚至不同尺寸也可供选择。
  • 与 LCD 相比,OLED 显示屏尺寸更小,显示效果更好
    0.96 寸OLED显示屏所用的驱动IC为SSD1306;

其具有内部升压功能;所以在设计的时候不需要再专一设计升压电路;

当然了本屏也可以选用外部升压。

SSD1306的每页包含了128个字节,总共8页,这样刚好是 128*64 的点阵大小。

由上图可知,0.96寸OLED有八页,128列,每一页又有8小行:

对于一个0.96寸OLED,有8页(也可以称为8个水平扫描线)和128列。通过8页和128列,可以操作所有64x128个像素点。

第一步是控制页数:

OLED屏幕的每一页都是由一组水平扫描线构成的,每次只能显示一页。通过控制页数的切换,我们可以在屏幕上显示不同的内容。总共有8页,可以通过指令来切换到目标页。

第二步是控制列数:

在每一页上,OLED屏幕有128列。列数确定了水平方向的像素点位置。我们可以通过指令来选择在特定页上的目标列。

这样,我们可以通过控制页数和列数的组合来操作到所有64x128个像素点。可以根据需要在特定的页和列上显示图形、文字或其他内容。

程序理解与设计:

1.操作时序---写命令、写数据:

由上图可知,在通过IIC尝试控制OLED时,有俩个主要的操作:1.写数据0x40 2.写命令0x00

因此写指令与写数据的操作过程完全一致只是 写入指令与数据的寄存器不同,一个是0x00,一个是0x40,选择好了写入的寄存器是指令还是数据后,就能传递我们具体的指令或者数据了:

cpp 复制代码
/**********************************************
// IIC Write Command
**********************************************/
void Write_IIC_Command(unsigned char IIC_Command)
{
   IIC_Start();
   Write_IIC_Byte(0x78);            //Slave address,SA0=0
	IIC_Wait_Ack();	
   Write_IIC_Byte(0x00);			//write command
	IIC_Wait_Ack();	
   Write_IIC_Byte(IIC_Command); 
	IIC_Wait_Ack();	
   IIC_Stop();
}
/**********************************************
// IIC Write Data
**********************************************/
void Write_IIC_Data(unsigned char IIC_Data)
{
   IIC_Start();
   Write_IIC_Byte(0x78);			//D/C#=0; R/W#=0
	IIC_Wait_Ack();	
   Write_IIC_Byte(0x40);			//write data
	IIC_Wait_Ack();	
   Write_IIC_Byte(IIC_Data);
	IIC_Wait_Ack();	
   IIC_Stop();
}

二、清屏命令:

接下来讲解一下清屏命令,从这个命令我们可以初步明白一下:写命令与写数据具体代表什么,以及8页,128列,究竟是怎么操作的:

首先是整了一个写入函数,这个函数没有别的意思,就是整合了Write_IIC_Command()与Write_IIC_Data(),起到了有命令写命令,有数据写数据的效果,主要是方便后续程序编写,不管写数据还是命令,直接调用它就行了。

它有俩个参数:第一个参数dat是数据,第二个参数cmd就是选择这个dat数据是写入命令寄存器 的还是写入数据寄存器的。

期间还写了俩个宏定义,用来提醒自己,这里的步骤是写命令寄存器 的还是写数据寄存器的:

cpp 复制代码
#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据


void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
	if(cmd)
		{ Write_IIC_Data(dat);}
	else 
        { Write_IIC_Command(dat);}
}
cpp 复制代码
//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!	  
void OLED_Clear(void)  
{  
	u8 i,n;		    
	for(i=0;i<8;i++)  
	{  
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址(0~7)
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置---列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置---列高地址   
		for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); 
	} //更新显示
}

我们可以看到,整个函数一进入就是进行一个8次的循环,每次循环进入:

首先就会先选择哪一页需要清空,而OLED共有八页,因此需要循环八次来选择0~7这八个页号~

其次选择哪一列需要清空,因为这是个屏幕,我们使用平面直角坐标系里确定一个点来理解,如果OLED是横向显示的,前面的页就好比确定了Y坐标,这里的列就是确定了X坐标,这样,先确定了Y,再内套一个循环128次,依次选择一列上的X进行清空。

**综上:**这个函数总共是8*128个循环操作,才使得OLED全部清空~~~

三、初始化SSD1306显示:

这部分初始化分为单片机IIC引脚的初始化 、以及对SSD1306写入一些必要命令的初始化

在 单片机IIC引脚的初始化 方面不多说,而对SSD1306写入一些必要命令方面,我们可以通过我的注释看出,有对比度、反显等可以设置,具体写入什么进行设置可以百度,我这配的都是正常的通用设置:这种写命令,一般都是先写寄存器,在写数据设置:

cpp 复制代码
//初始化SSD1306					    
void OLED_Init(void)
{ 	
 	GPIO_InitTypeDef  GPIO_InitStructure;                  //定义初始化结构体
	
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);	 //使能APB2端口时钟
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7;	 //初始化B6,B7
 	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; 		   //推挽输出
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;      //速度50MHz
 	GPIO_Init(GPIOB, &GPIO_InitStructure);	               //初始化GPIOB
 	GPIO_SetBits(GPIOB,GPIO_Pin_6|GPIO_Pin_7);							

  delay_ms(100);                               
	
  OLED_WR_Byte(0xAE,OLED_CMD);//--display off                    关闭显示屏
	
	OLED_WR_Byte(0x00,OLED_CMD);//---set low column address        设置低列地址 
	OLED_WR_Byte(0x10,OLED_CMD);//---set high column address       设置高列地址
	
	OLED_WR_Byte(0x40,OLED_CMD);//--set start line address         设置起始行地址
	OLED_WR_Byte(0xB0,OLED_CMD);//--set page address               设置页地址
	
	OLED_WR_Byte(0x81,OLED_CMD); // contract control               设置对比度控制
	OLED_WR_Byte(0xFF,OLED_CMD);//--128                            对比度值设置为128
	
	OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap                设置段重映射
	OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverse               设置正常显示/反向显示
	OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)   设置多路复用比率(1到64)
	OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 duty                      设置Duty值为1/32
	OLED_WR_Byte(0xC8,OLED_CMD);//Com scan direction               设置COM扫描方向
	
	OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset              设置显示偏移
	OLED_WR_Byte(0x00,OLED_CMD);//                                 设置显示起始行
	
	OLED_WR_Byte(0xD5,OLED_CMD);//set osc division                 设置振荡器分频
	OLED_WR_Byte(0x80,OLED_CMD);//                                 设置振荡器分频值为80
	
	OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode off          设置区域颜色模式关闭
	OLED_WR_Byte(0x05,OLED_CMD);//                                 设置区域颜色模式值为05
	
	OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge Period            设置预充电周期
	OLED_WR_Byte(0xF1,OLED_CMD);//                                 设置预充电周期值为F1
	
	OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartion        设置COM引脚配置
	OLED_WR_Byte(0x12,OLED_CMD);//                                 设置COM引脚配置值为12
	
	OLED_WR_Byte(0xDB,OLED_CMD);//set Vcomh                        设置Vcomh
	OLED_WR_Byte(0x30,OLED_CMD);//                                 设置Vcomh值为30
	
	OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enable           设置充电泵使能
	OLED_WR_Byte(0x14,OLED_CMD);//                                 设置充电泵使能值为14
	
	OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel             打开显示屏
} 

四、开启与关闭指令:

这是OLED开启与关闭的函数,主要原理也是向它的寄存器写数据命令,可以快捷开启关闭OLED,一般程序初始化时会关闭OLED,防止乱显示,初始化完成后打开即可:

有时开机刷新比较慢,像素可能会一行一行刷出来,这时可以先调用 OLED_Display_Off(),在紧接着调用刷新显示的函数,然后在调用OLED_Display_On(),像素就不会一行一行刷出来了~~原理就是等他刷新显示的函数循环加载完成了,再整个打开OLED:

cpp 复制代码
//开启OLED显示    
void OLED_Display_On(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
	OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}
//关闭OLED显示     
void OLED_Display_Off(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
	OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}		

五、OLED坐标设置:

这是设置OLED显示绘制起点的函数,每种文字,图像都有占用的范围,比如宋体汉字,每个字一般占用16*16像素,而字母可以占用更少的像素区域~~:

cpp 复制代码
//坐标设置
void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 
    OLED_WR_Byte(0xb0+y,OLED_CMD);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f),OLED_CMD); 
} 

如图可以更直观理解一个中文字是怎么点亮的,小框代表一个中文字需要占用的像素区,大框就是OLED全部显示区,Y坐标代表页,X坐标代表列。

六、常用ASCLL码字符字库:

这是常用ASCLL码字符字库,分俩种大小:12*6以及16*8的字母:这个直接复制使用即可:

cpp 复制代码
//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:12*6
/************************************6*8的点阵************************************/
const unsigned char F6x8[][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

七、字符显示函数:

这是在指定位置显示一个字符的函数,X,Y是它的起始区域,chr就是该字符的ASCLL码,Size是选择它的显示占用像素点,16*8还是12*6(本质上是引用六中的常用字库);

cpp 复制代码
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示				 
//size:选择字体 16/12 
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{      	
	unsigned char c=0,i=0;	
		c=chr-' ';//得到偏移后的值			
		if(x>Max_Column-1){x=0;y=y+2;}
		if(Char_Size ==16)
			{
			OLED_Set_Pos(x,y);	
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
			OLED_Set_Pos(x,y+1);
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
			}
			else {	
				OLED_Set_Pos(x,y);
				for(i=0;i<6;i++)
				OLED_WR_Byte(F6x8[c][i],OLED_DATA);
				
			}
}

程序设计:

在坐标(0,0)处打印一个大写的A(16*8像素),

在坐标(12,0)处打印一个小写的b(12*6像素),

并全屏闪烁(每0.5秒)。

主函数代码:

之前 其余函数代码都一个个讲了,因此这里只贴出主函数代码:

cpp 复制代码
#include "main.h"

int main(void)
{	
	init_ALL();     //初始化所有函数
  while(1)
	{
		OLED_ShowChar(0,0,'A',16);
		OLED_ShowChar(12,0,'b',12);		
		
		OLED_Display_On();
		delay_ms(500);
		
		OLED_Display_Off();
  	delay_ms(500);
	}
}


//初始化所有函数:
void init_ALL(void)
{
	SysTick_Init(72);         //初始化滴答计时器
//	Timer2_Init();						//初始化定时器2
	i2c_GPIO_Config();	      //IIC初始化	
	OLED_Init();              //初始化OLED屏幕
	OLED_Clear();             //清空屏幕数据
}

测试效果:

测试工程下载:

https://download.csdn.net/download/qq_64257614/88232233?spm=1001.2014.3001.5503

相关推荐
zmd-zk1 小时前
flink学习(2)——wordcount案例
大数据·开发语言·学习·flink
Chef_Chen1 小时前
从0开始学习机器学习--Day33--机器学习阶段总结
人工智能·学习·机器学习
hopetomorrow2 小时前
学习路之压力测试--jmeter安装教程
学习·jmeter·压力测试
hopetomorrow2 小时前
学习路之PHP--使用GROUP BY 发生错误 SELECT list is not in GROUP BY clause .......... 解决
开发语言·学习·php
/**书香门第*/2 小时前
Cocos creator 3.8 支持的动画 7
学习·游戏·游戏引擎·游戏程序·cocos2d
美式小田3 小时前
单片机学习笔记 9. 8×8LED点阵屏
笔记·单片机·嵌入式硬件·学习
猫爪笔记3 小时前
前端:HTML (学习笔记)【2】
前端·笔记·学习·html
_不会dp不改名_3 小时前
HCIA笔记3--TCP-UDP-交换机工作原理
笔记·tcp/ip·udp
时光の尘3 小时前
C语言菜鸟入门·关键字·float以及double的用法
运维·服务器·c语言·开发语言·stm32·单片机·c
-一杯为品-3 小时前
【51单片机】程序实验5&6.独立按键-矩阵按键
c语言·笔记·学习·51单片机·硬件工程