STM32_HAL_RTC_实现获取日期

1思路

使用hal库的函数获取时间和日期,在使用sprintf()函数将数据转换为字符

用UART将数据传出

2main.h的源码

cpp 复制代码
/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "rtc.h"
#include "usart.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "stdio.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_RTC_Init();
  MX_USART1_UART_Init();
  /* USER CODE BEGIN 2 */
	RTC_TimeTypeDef stime={0};//时间的结构体//存储时间
	char data_shijian [30];//存储数据
	RTC_DateTypeDef sDate={0};//时间的结构体//存储时间
	char data1_shijian [30];//存储数据
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
		HAL_RTC_GetTime(&hrtc,&stime,RTC_FORMAT_BIN);//获取时间
		sprintf(data_shijian,"时间为:%02d : %02d : %02d ",stime.Hours,stime.Minutes,stime.Seconds);
		HAL_UART_Transmit(&huart1,(uint8_t*)data_shijian,sizeof(data_shijian),20);
		HAL_Delay(1000);
		HAL_RTC_GetDate(&hrtc,&sDate,RTC_FORMAT_BIN);//日期
		sprintf(data_shijian, "日期为:%02d - %02d - %02d - %02d", 2000+sDate.Year, sDate.Month, sDate.Date, sDate.WeekDay);
		HAL_UART_Transmit(&huart1,(uint8_t*)data_shijian,sizeof(data_shijian),20);
		HAL_Delay(1000);
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE|RCC_OSCILLATORTYPE_LSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC;
  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
相关推荐
杰克逊的日记9 天前
MCU编程
单片机·嵌入式硬件
Python小老六9 天前
单片机测ntc热敏电阻的几种方法(软件)
数据库·单片机·嵌入式硬件
懒惰的bit9 天前
STM32F103C8T6 学习笔记摘要(四)
笔记·stm32·学习
HX科技9 天前
STM32给FPGA的外挂FLASH进行升级
stm32·嵌入式硬件·fpga开发·flash·fpga升级
Suagrhaha9 天前
驱动入门的进一步深入
linux·嵌入式硬件·驱动
国科安芯9 天前
基于ASP4644多通道降压技术在电力监测系统中集成应用与发展前景
嵌入式硬件·硬件架构·硬件工程
Li Zi9 天前
STM32 ADC(DMA)双缓冲采集+串口USART(DMA)直接传输12位原始数据到上位机显示并保存WAV格式音频文件 收藏住绝对实用!!!
经验分享·stm32·单片机·嵌入式硬件
进击的程序汪9 天前
触摸屏(典型 I2C + Input 子系统设备)从设备树解析到触摸事件上报
linux·网络·嵌入式硬件
damo王9 天前
Zephyr 系统深入解析:SoC 支持包结构与中断调度器调优实践
单片机·嵌入式硬件·zephyr
逼子格9 天前
硬件工程师笔试面试高频考点汇总——(2025版)
单片机·嵌入式硬件·面试·硬件工程·硬件工程师·硬件工程师真题·硬件工程师面试