温湿度采集及OLED显示

划水的达达鸭2024-06-24 10:59

目录

软件I2C和硬件I2C

"I2C"代表Inter-Integrated Circuit，是一种用于在数字电路之间进行通信的串行通信协议。软件I2C和硬件I2C是两种实现这种协议的方式。

软件I2C是通过软件来模拟I2C通信协议的实现方式。在这种情况下，微控制器的GPIO引脚被用作数据线和时钟线，通过编程控制这些引脚的状态来模拟I2C通信协议。软件I2C的实现通常比较灵活，但由于依赖于处理器的速度和其他因素，可能在速度和稳定性方面存在一定限制。

硬件I2C则是使用专门的硬件模块来实现I2C通信协议。这些硬件模块通常集成在微控制器或其他芯片中，能够更快速、更稳定地进行I2C通信。硬件I2C通常具有更高的性能和可靠性，但可能在灵活性方面受到一定限制。

选择软件I2C还是硬件I2C取决于具体的应用需求。如果需要更高的性能和稳定性，通常会选择硬件I2C。如果需要更大的灵活性，软件I2C可能是更好的选择。

每隔2秒钟采集一次温湿度数据，显示到OLED上，同时通过串口发送到上位机的"串口助手"软件

主函数main.c:

c 复制代码 
#include "delay.h"
#include "usart.h"
#include "bsp_i2c.h"

int main(void)
{	
	delay_init();     //ÑÓʱº¯Êý³õʼ>>¯	  
	uart_init(115200);	 //´®¿Ú³õʼ>>¯Îª115200
	IIC_Init();
		while(1)
	{
		printf("¿ªÊ¼²âÁ¿£¬ÇëÉԵȣº");
		read_AHT20_once();
		delay_ms(1500);
  }
}

把以下代码和主函数main.c放到一起:

usart.c

c 复制代码 
#include "sys.h"
#include "usart.h"

//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
// 	 
//Èç¹ûʹÓÃucos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É.
#if SYSTEM_SUPPORT_UCOS
#include "includes.h"					//ucos ʹÓÃ	  
#endif
//	 
//STM32¿ª·¢°å
//´®¿Ú1³õʼ>>¯		   
// 	  
//
//¼ÓÈëÒÔÏ´úÂë,Ö§³Öprintfº¯Êý,¶ø²>>ÐèҪѡÔñuse MicroLIB	  
#if 1
#pragma import(__use_no_semihosting)             
//±ê×¼¿âÐèÒªµÄÖ§³Öº¯Êý                 
struct __FILE 
{ 
	int handle; 

}; 

FILE __stdout;       
//¶¨Òå_sys_exit()ÒÔ±ÜÃâʹÓðëÖ÷>>úģʽ    
void _sys_exit(int x) 
{ 
	x = x; 
} 
//Öض¨Òåfputcº¯Êý 
int fputc(int ch, FILE *f)
{      
	while((USART1->SR&0X40)==0);//Ñ­>>··¢ËÍ,Ö±µ½·¢ËÍÍê±Ï   
    USART1->DR = (u8) ch;      
	return ch;
}
#endif 

/*ʹÓÃmicroLibµÄ·½·¨*/
 /* 
int fputc(int ch, FILE *f)
{
	USART_SendData(USART1, (uint8_t) ch);

	while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET) {}	
   
    return ch;
}
int GetKey (void)  { 

    while (!(USART1->SR & USART_FLAG_RXNE));

    return ((int)(USART1->DR & 0x1FF));
}
*/
 
#if EN_USART1_RX   //Èç¹ûʹÄÜÁ˽ÓÊÕ
//´®¿Ú1ÖжϷþÎñ³ÌÐò
//×¢Òâ,¶ÁÈ¡USARTx->SRÄܱÜÃâĪÃûÆäÃîµÄ´íÎó   	
u8 USART_RX_BUF[USART_REC_LEN];     //½ÓÊÕ>>º³å,×î´óUSART_REC_LEN¸ö×Ö½Ú.
//½ÓÊÕ״̬
//bit15£¬	½ÓÊÕÍê³É±êÖ¾
//bit14£¬	½ÓÊÕµ½0x0d
//bit13~0£¬	½ÓÊÕµ½µÄÓÐЧ×Ö½ÚÊýÄ¿
u16 USART_RX_STA=0;       //½ÓÊÕ״̬±ê¼Ç	  
  
void uart_init(u32 bound){
    //GPIO¶Ë¿ÚÉèÖÃ
  GPIO_InitTypeDef GPIO_InitStructure;
	USART_InitTypeDef USART_InitStructure;
	NVIC_InitTypeDef NVIC_InitStructure;
	 
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE);	//ʹÄÜUSART1£¬GPIOAʱÖÓ
     //USART1_TX   PA.9
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; //PA.9
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;	//¸´ÓÃÍÆÍìÊä³ö
    GPIO_Init(GPIOA, &GPIO_InitStructure);
   
    //USART1_RX	  PA.10
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;//¸¡¿ÕÊäÈë
    GPIO_Init(GPIOA, &GPIO_InitStructure);  

   //Usart1 NVIC ÅäÖÃ

    NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=3 ;//ÇÀÕ¼ÓÅÏȼ¶3
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;		//×ÓÓÅÏȼ¶3
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;			//IRQͨµÀʹÄÜ
	NVIC_Init(&NVIC_InitStructure);	//¸ù¾ÝÖ¸¶¨µÄ²ÎÊý³õʼ>>¯VIC¼Ä´æÆ÷
  
   //USART ³õʼ>>¯ÉèÖÃ

	USART_InitStructure.USART_BaudRate = bound;//Ò>>°ãÉèÖÃΪ9600;
	USART_InitStructure.USART_WordLength = USART_WordLength_8b;//×Ö³¤Îª8Î>>Êý¾Ý¸ñʽ
	USART_InitStructure.USART_StopBits = USART_StopBits_1;//Ò>>¸öÍ£Ö¹Î>>
	USART_InitStructure.USART_Parity = USART_Parity_No;//ÎÞÆæżУÑéÎ>>
	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//ÎÞÓ²¼þÊý¾ÝÁ÷¿ØÖÆ
	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;	//ÊÕ·¢Ä£Ê½

    USART_Init(USART1, &USART_InitStructure); //³õʼ>>¯´®¿Ú
    USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);//¿ªÆôÖжÏ
    USART_Cmd(USART1, ENABLE);                    //ʹÄÜ´®¿Ú 

}

void USART1_IRQHandler(void)                	//´®¿Ú1ÖжϷþÎñ³ÌÐò
	{
	u8 Res;
#ifdef OS_TICKS_PER_SEC	 	//Èç¹ûʱÖÓ½ÚÅÄÊý¶¨ÒåÁË,˵Ã÷ҪʹÓÃucosIIÁË.
	OSIntEnter();    
#endif
	if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)  //½ÓÊÕÖжÏ(½ÓÊÕµ½µÄÊý¾Ý±ØÐëÊÇ0x0d 0x0a½áβ)
		{
		Res =USART_ReceiveData(USART1);//(USART1->DR);	//¶ÁÈ¡½ÓÊÕµ½µÄÊý¾Ý
		
		if((USART_RX_STA&0x8000)==0)//½ÓÊÕδÍê³É
			{
			if(USART_RX_STA&0x4000)//½ÓÊÕµ½ÁË0x0d
				{
				if(Res!=0x0a)USART_RX_STA=0;//½ÓÊÕ´íÎó,ÖØпªÊ¼
				else USART_RX_STA|=0x8000;	//½ÓÊÕÍê³ÉÁË 
				}
			else //>>¹Ã>>ÊÕµ½0X0D
				{	
				if(Res==0x0d)USART_RX_STA|=0x4000;
				else
					{
					USART_RX_BUF[USART_RX_STA&0X3FFF]=Res ;
					USART_RX_STA++;
					if(USART_RX_STA>(USART_REC_LEN-1))USART_RX_STA=0;//½ÓÊÕÊý¾Ý´íÎó,ÖØпªÊ¼½ÓÊÕ	  
					}		 
				}
			}   		 
     } 
#ifdef OS_TICKS_PER_SEC	 	//Èç¹ûʱÖÓ½ÚÅÄÊý¶¨ÒåÁË,˵Ã÷ҪʹÓÃucosIIÁË.
	OSIntExit();  											 
#endif
} 
#endif

usart.h

c 复制代码 
#ifndef __USART_H
#define __USART_H
#include "stdio.h"	
#include "sys.h" 

//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
//	 
//STM32¿ª·¢°å
//´®¿Ú1³õʼ>>¯		   

#define USART_REC_LEN  			200  	//¶¨Òå×î´ó½ÓÊÕ×Ö½ÚÊý 200
#define EN_USART1_RX 			1		    //ʹÄÜ£¨1£©/½ûÖ¹£¨0£©´®¿Ú1½ÓÊÕ
	  	
extern u8  USART_RX_BUF[USART_REC_LEN]; //½ÓÊÕ>>º³å,×î´óUSART_REC_LEN¸ö×Ö½Ú.Ä©×Ö½ÚΪ>>>>Ðзû 
extern u16 USART_RX_STA;         		//½ÓÊÕ״̬±ê¼Ç	
//Èç¹ûÏë´®¿ÚÖжϽÓÊÕ£¬Çë²>>ҪעÊÍÒÔϺ궨Òå
void uart_init(u32 bound);
#endif

bsp_i2c.c

c 复制代码 
#include "bsp_i2c.h"
#include "delay.h"

uint8_t   ack_status=0;
uint8_t   readByte[6];
uint8_t   AHT20_status=0;

uint32_t  H1=0;  //Humility
uint32_t  T1=0;  //Temperature

uint8_t  AHT20_OutData[4];
uint8_t  AHT20sendOutData[10] = {0xFA, 0x06, 0x0A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF};

void IIC_Init(void)
{					     
	GPIO_InitTypeDef GPIO_InitStructure;
	RCC_APB2PeriphClockCmd(	RCC_APB2Periph_GPIOB, ENABLE );	
	   
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP ;   //ÍÆÍìÊä³ö
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_Init(GPIOB, &GPIO_InitStructure);
 
	IIC_SCL=1;
	IIC_SDA=1;
 
}
//²úÉúIICÆðʼÐźÅ
void IIC_Start(void)
{
	SDA_OUT();     //sdaÏßÊä³ö
	IIC_SDA=1;	  	  
	IIC_SCL=1;
	delay_us(4);
 	IIC_SDA=0;//START:when CLK is high,DATA change form high to low 
	delay_us(4);
	IIC_SCL=0;//ǯסI2C×ÜÏߣ¬×¼±¸·¢ËÍ>>ò½ÓÊÕÊý¾Ý 
}	  
//²úÉúIICÍ£Ö¹ÐźÅ
void IIC_Stop(void)
{
	SDA_OUT();//sdaÏßÊä³ö
	IIC_SCL=0;
	IIC_SDA=0;//STOP:when CLK is high DATA change form low to high
 	delay_us(4);
	IIC_SCL=1; 
	IIC_SDA=1;//·¢ËÍI2C×ÜÏß½áÊøÐźÅ
	delay_us(4);							   	
}
//µÈ´ýÓ¦´ðÐźŵ½À´
//·µ>>ØÖµ£º1£¬½ÓÊÕÓ¦´ðʧ°Ü
//        0£¬½ÓÊÕÓ¦´ð³É¹¦
u8 IIC_Wait_Ack(void)
{
	u8 ucErrTime=0;
	SDA_IN();      //SDAÉèÖÃΪÊäÈë  
	IIC_SDA=1;delay_us(1);	   
	IIC_SCL=1;delay_us(1);	 
	while(READ_SDA)
	{
		ucErrTime++;
		if(ucErrTime>250)
		{
			IIC_Stop();
			return 1;
		}
	}
	IIC_SCL=0;//ʱÖÓÊä³ö0 	   
	return 0;  
} 
//²úÉúACKÓ¦´ð
void IIC_Ack(void)
{
	IIC_SCL=0;
	SDA_OUT();
	IIC_SDA=0;
	delay_us(2);
	IIC_SCL=1;
	delay_us(2);
	IIC_SCL=0;
}
//²>>²úÉúACKÓ¦´ð		    
void IIC_NAck(void)
{
	IIC_SCL=0;
	SDA_OUT();
	IIC_SDA=1;
	delay_us(2);
	IIC_SCL=1;
	delay_us(2);
	IIC_SCL=0;
}					 				     
//IIC·¢ËÍÒ>>¸ö×Ö½Ú
//·µ>>Ø´Ó>>úÓÐÎÞÓ¦´ð
//1£¬ÓÐÓ¦´ð
//0£¬ÎÞÓ¦´ð			  
void IIC_Send_Byte(u8 txd)
{                        
    u8 t;   
		SDA_OUT(); 	    
    IIC_SCL=0;//À­µÍʱÖÓ¿ªÊ¼Êý¾Ý´<<Êä
    for(t=0;t<8;t++)
    {              
        IIC_SDA=(txd&0x80)>>7;
        txd<<=1; 	  
		delay_us(2);   //¶ÔTEA5767ÕâÈý¸öÑÓʱ¶¼ÊDZØÐëµÄ
		IIC_SCL=1;
		delay_us(2); 
		IIC_SCL=0;	
		delay_us(2);
    }	 
} 	    
//¶Á1¸ö×Ö½Ú£¬ack=1ʱ£¬·¢ËÍACK£¬ack=0£¬·¢ËÍnACK   
u8 IIC_Read_Byte(unsigned char ack)
{
	unsigned char i,receive=0;
	SDA_IN();//SDAÉèÖÃΪÊäÈë
  for(i=0;i<8;i++ )
	{
    IIC_SCL=0; 
    delay_us(2);
		IIC_SCL=1;
    receive<<=1;
    if(READ_SDA)receive++;   
		delay_us(1); 
  }					 
	if (!ack)
			IIC_NAck();//·¢ËÍnACK
	else
			IIC_Ack(); //·¢ËÍACK   
	return receive;
}
 
void IIC_WriteByte(uint16_t addr,uint8_t data,uint8_t device_addr)
{
	IIC_Start();  
	
	if(device_addr==0xA0) //eepromµØÖ·´óÓÚ1×Ö½Ú
		IIC_Send_Byte(0xA0 + ((addr/256)<<1));//·¢Ë͸ߵØÖ·
	else
		IIC_Send_Byte(device_addr);	    //·¢Æ÷¼þµØÖ·
	IIC_Wait_Ack(); 
	IIC_Send_Byte(addr&0xFF);   //·¢Ë͵͵ØÖ·
	IIC_Wait_Ack(); 
	IIC_Send_Byte(data);     //·¢ËÍ×Ö½Ú							   
	IIC_Wait_Ack();  		    	   
  IIC_Stop();//²úÉúÒ>>¸öÍ£Ö¹Ìõ¼þ 
	if(device_addr==0xA0) //
		delay_ms(10);
	else
		delay_us(2);
}
 
uint16_t IIC_ReadByte(uint16_t addr,uint8_t device_addr,uint8_t ByteNumToRead)  //¶Á¼Ä´æÆ÷>>ò¶ÁÊý¾Ý
{	
		uint16_t data;
		IIC_Start();  
		if(device_addr==0xA0)
			IIC_Send_Byte(0xA0 + ((addr/256)<<1));
		else
			IIC_Send_Byte(device_addr);	
		IIC_Wait_Ack();
		IIC_Send_Byte(addr&0xFF);   //·¢Ë͵͵ØÖ·
		IIC_Wait_Ack(); 
 
		IIC_Start();  	
		IIC_Send_Byte(device_addr+1);	    //·¢Æ÷¼þµØÖ·
		IIC_Wait_Ack();
		if(ByteNumToRead == 1)//LM75ζÈÊý¾ÝΪ11bit
		{
			data=IIC_Read_Byte(0);
		}
		else
			{
				data=IIC_Read_Byte(1);
				data=(data<<8)+IIC_Read_Byte(0);
			}
		IIC_Stop();//²úÉúÒ>>¸öÍ£Ö¹Ìõ¼þ	    
		return data;
}

/**********
*ÉÏÃ沿·ÖΪIO¿ÚÄ£¿éI2CÅäÖÃ
*
*´ÓÕâÒÔÏ¿ªÊ¼ÎªAHT20µÄÅäÖÃI2C
*º¯ÊýÃûÓÐIICºÍI2CµÄÇø±ð£¬Çë×¢Ò⣡£¡£¡£¡£¡
*
*2020/2/23×îºóÐÞ¸ÄÈÕÆÚ
*
***********/
void  read_AHT20_once(void)
{
	delay_ms(10);

	reset_AHT20();
	delay_ms(10);

	init_AHT20();
	delay_ms(10);

	startMeasure_AHT20();
	delay_ms(80);

	read_AHT20();
	delay_ms(5);
}

void  reset_AHT20(void)
{

	I2C_Start();

	I2C_WriteByte(0x70);
	ack_status = Receive_ACK();
	if(ack_status) printf("1");
	else printf("1-n-");
	I2C_WriteByte(0xBA);
	ack_status = Receive_ACK();
		if(ack_status) printf("2");
	else printf("2-n-");
	I2C_Stop();

	/*
	AHT20_OutData[0] = 0;
	AHT20_OutData[1] = 0;
	AHT20_OutData[2] = 0;
	AHT20_OutData[3] = 0;
	*/
}

void  init_AHT20(void)
{
	I2C_Start();

	I2C_WriteByte(0x70);
	ack_status = Receive_ACK();
	if(ack_status) printf("3");
	else printf("3-n-");	
	I2C_WriteByte(0xE1);
	ack_status = Receive_ACK();
	if(ack_status) printf("4");
	else printf("4-n-");
	I2C_WriteByte(0x08);
	ack_status = Receive_ACK();
	if(ack_status) printf("5");
	else printf("5-n-");
	I2C_WriteByte(0x00);
	ack_status = Receive_ACK();
	if(ack_status) printf("6");
	else printf("6-n-");
	I2C_Stop();
}

void  startMeasure_AHT20(void)
{
	//------------
	I2C_Start();

	I2C_WriteByte(0x70);
	ack_status = Receive_ACK();
	if(ack_status) printf("7");
	else printf("7-n-");
	I2C_WriteByte(0xAC);
	ack_status = Receive_ACK();
	if(ack_status) printf("8");
	else printf("8-n-");
	I2C_WriteByte(0x33);
	ack_status = Receive_ACK();
	if(ack_status) printf("9");
	else printf("9-n-");
	I2C_WriteByte(0x00);
	ack_status = Receive_ACK();
	if(ack_status) printf("10");
	else printf("10-n-");
	I2C_Stop();
}

void read_AHT20(void)
{
	uint8_t   i;

	for(i=0; i<6; i++)
	{
		readByte[i]=0;
	}

	//-------------
	I2C_Start();

	I2C_WriteByte(0x71);
	ack_status = Receive_ACK();
	readByte[0]= I2C_ReadByte();
	Send_ACK();

	readByte[1]= I2C_ReadByte();
	Send_ACK();

	readByte[2]= I2C_ReadByte();
	Send_ACK();

	readByte[3]= I2C_ReadByte();
	Send_ACK();

	readByte[4]= I2C_ReadByte();
	Send_ACK();

	readByte[5]= I2C_ReadByte();
	SendNot_Ack();
	//Send_ACK();

	I2C_Stop();

	//--------------
	if( (readByte[0] & 0x68) == 0x08 )
	{
		H1 = readByte[1];
		H1 = (H1<<8) | readByte[2];
		H1 = (H1<<8) | readByte[3];
		H1 = H1>>4;

		H1 = (H1*1000)/1024/1024;

		T1 = readByte[3];
		T1 = T1 & 0x0000000F;
		T1 = (T1<<8) | readByte[4];
		T1 = (T1<<8) | readByte[5];

		T1 = (T1*2000)/1024/1024 - 500;

		AHT20_OutData[0] = (H1>>8) & 0x000000FF;
		AHT20_OutData[1] = H1 & 0x000000FF;

		AHT20_OutData[2] = (T1>>8) & 0x000000FF;
		AHT20_OutData[3] = T1 & 0x000000FF;
	}
	else
	{
		AHT20_OutData[0] = 0xFF;
		AHT20_OutData[1] = 0xFF;

		AHT20_OutData[2] = 0xFF;
		AHT20_OutData[3] = 0xFF;
		printf("ʧ°ÜÁË");

	}
	printf("\r\n");
	printf("ζÈ:%d%d.%d",T1/100,(T1/10)%10,T1%10);
	printf("ʪ¶È:%d%d.%d",H1/100,(H1/10)%10,H1%10);
	printf("\r\n");
}

uint8_t  Receive_ACK(void)
{
	uint8_t result=0;
	uint8_t cnt=0;

	IIC_SCL = 0;
	SDA_IN(); 
	delay_us(4);

	IIC_SCL = 1;
	delay_us(4);

	while(READ_SDA && (cnt<100))
	{
		cnt++;
	}

	IIC_SCL = 0;
	delay_us(4);

	if(cnt<100)
	{
		result=1;
	}
	return result;
}

void  Send_ACK(void)
{
	SDA_OUT();
	IIC_SCL = 0;
	delay_us(4);

	IIC_SDA = 0;
	delay_us(4);

	IIC_SCL = 1;
	delay_us(4);
	IIC_SCL = 0;
	delay_us(4);

	SDA_IN();
}

void  SendNot_Ack(void)
{
	SDA_OUT();
	IIC_SCL = 0;
	delay_us(4);

	IIC_SDA = 1;
	delay_us(4);

	IIC_SCL = 1;
	delay_us(4);

	IIC_SCL = 0;
	delay_us(4);

	IIC_SDA = 0;
	delay_us(4);
}


void I2C_WriteByte(uint8_t  input)
{
	uint8_t  i;
	SDA_OUT();
	for(i=0; i<8; i++)
	{
		IIC_SCL = 0;
		delay_ms(5);

		if(input & 0x80)
		{
			IIC_SDA = 1;
			//delaymm(10);
		}
		else
		{
			IIC_SDA = 0;
			//delaymm(10);
		}

		IIC_SCL = 1;
		delay_ms(5);

		input = (input<<1);
	}

	IIC_SCL = 0;
	delay_us(4);

	SDA_IN();
	delay_us(4);
}	


uint8_t I2C_ReadByte(void)
{
	uint8_t  resultByte=0;
	uint8_t  i=0, a=0;

	IIC_SCL = 0;
	SDA_IN();
	delay_ms(4);

	for(i=0; i<8; i++)
	{
		IIC_SCL = 1;
		delay_ms(3);

		a=0;
		if(READ_SDA)
		{
			a=1;
		}
		else
		{
			a=0;
		}

		//resultByte = resultByte | a;
		resultByte = (resultByte << 1) | a;

		IIC_SCL = 0;
		delay_ms(3);
	}

	SDA_IN();
	delay_ms(10);

	return   resultByte;
}


void  set_AHT20sendOutData(void)
{
	/* --------------------------
	 * 0xFA 0x06 0x0A temperature(2 Bytes) humility(2Bytes) short Address(2 Bytes)
	 * And Check (1 byte)
	 * -------------------------*/
	AHT20sendOutData[3] = AHT20_OutData[0];
	AHT20sendOutData[4] = AHT20_OutData[1];
	AHT20sendOutData[5] = AHT20_OutData[2];
	AHT20sendOutData[6] = AHT20_OutData[3];

//	AHT20sendOutData[7] = (drf1609.shortAddress >> 8) & 0x00FF;
//	AHT20sendOutData[8] = drf1609.shortAddress  & 0x00FF;

//	AHT20sendOutData[9] = getXY(AHT20sendOutData,10);
}

void  I2C_Start(void)
{
	SDA_OUT();
	IIC_SCL = 1;
	delay_ms(4);

	IIC_SDA = 1;
	delay_ms(4);
	IIC_SDA = 0;
	delay_ms(4);

	IIC_SCL = 0;
	delay_ms(4);
}

void  I2C_Stop(void)
{
	SDA_OUT();
	IIC_SDA = 0;
	delay_ms(4);

	IIC_SCL = 1;
	delay_ms(4);

	IIC_SDA = 1;
	delay_ms(4);
}

bsp_i2c.h

c 复制代码 
#ifndef __BSP_I2C_H
#define __BSP_I2C_H

#include "sys.h"
#include "delay.h"
#include "usart.h"
//ʹÓÃIIC1 ¹ÒÔØM24C02,OLED,LM75AD,HT1382    PB6,PB7
 
#define SDA_IN()  {GPIOB->CRL&=0X0FFFFFFF;GPIOB->CRL|=(u32)8<<28;}
#define SDA_OUT() {GPIOB->CRL&=0X0FFFFFFF;GPIOB->CRL|=(u32)3<<28;}
 
//IO²Ù×÷º¯Êý	 
#define IIC_SCL    PBout(6) //SCL
#define IIC_SDA    PBout(7) //SDA	 
#define READ_SDA   PBin(7)  //ÊäÈëSDA 


//IICËùÓвÙ×÷º¯Êý
void IIC_Init(void);                //³õʼ>>¯IICµÄIO¿Ú				 
void IIC_Start(void);				//·¢ËÍIIC¿ªÊ¼ÐźÅ
void IIC_Stop(void);	  			//·¢ËÍIICÍ£Ö¹ÐźÅ
void IIC_Send_Byte(u8 txd);			//IIC·¢ËÍÒ>>¸ö×Ö½Ú
u8 IIC_Read_Byte(unsigned char ack);//IIC¶ÁÈ¡Ò>>¸ö×Ö½Ú
u8 IIC_Wait_Ack(void); 				//IICµÈ´ýACKÐźÅ
void IIC_Ack(void);					//IIC·¢ËÍACKÐźÅ
void IIC_NAck(void);				//IIC²>>·¢ËÍACKÐźÅ
 
void IIC_WriteByte(uint16_t addr,uint8_t data,uint8_t device_addr);
uint16_t IIC_ReadByte(uint16_t addr,uint8_t device_addr,uint8_t ByteNumToRead);//¼Ä´æÆ÷µØÖ·£¬Æ÷¼þµØÖ·£¬Òª¶ÁµÄ×Ö½ÚÊý  


void  read_AHT20_once(void);
void  reset_AHT20(void);
void  init_AHT20(void);	
void  startMeasure_AHT20(void);
void  read_AHT20(void);
uint8_t  Receive_ACK(void);
void  Send_ACK(void);
void  SendNot_Ack(void);
void I2C_WriteByte(uint8_t  input);
uint8_t I2C_ReadByte(void);	
void  set_AHT20sendOutData(void);
void  I2C_Start(void);
void  I2C_Stop(void);
#endif

delay.c

c 复制代码 
#include "delay.h"
#include "sys.h"

//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
// 	 
//Èç¹ûʹÓÃucos,Ôò°üÀ¨ÏÂÃæµÄÍ·Îļþ¼´¿É.
#if SYSTEM_SUPPORT_UCOS
#include "includes.h"					//ucos ʹÓÃ	  
#endif
//	 
//STM32¿ª·¢°å
//ʹÓÃSysTickµÄÆÕͨ¼ÆÊýģʽ¶ÔÑÓ³Ù½øÐйÜÀí
//°üÀ¨delay_us,delay_ms
// 	 
static u8  fac_us=0;//usÑÓʱ±¶³ËÊý
static u16 fac_ms=0;//msÑÓʱ±¶³ËÊý
#ifdef OS_CRITICAL_METHOD 	//Èç¹ûOS_CRITICAL_METHOD¶¨ÒåÁË,˵Ã÷ʹÓÃucosIIÁË.
//systickÖжϷþÎñº¯Êý,ʹÓÃucosʱÓõ½
void SysTick_Handler(void)
{				   
	OSIntEnter();		//½øÈëÖжÏ
    OSTimeTick();       //µ÷ÓÃucosµÄʱÖÓ·þÎñ³ÌÐò               
    OSIntExit();        //´¥·¢ÈÎÎñÇÐ>>>>ÈíÖжÏ
}
#endif

//³õʼ>>¯ÑÓ³Ùº¯Êý
//µ±Ê¹ÓÃucosµÄʱºò,´Ëº¯Êý>>á³õʼ>>¯ucosµÄʱÖÓ½ÚÅÄ
//SYSTICKµÄʱÖӹ̶¨ÎªHCLKʱÖÓµÄ1/8
//SYSCLK:ϵͳʱÖÓ
void delay_init()	 
{

#ifdef OS_CRITICAL_METHOD 	//Èç¹ûOS_CRITICAL_METHOD¶¨ÒåÁË,˵Ã÷ʹÓÃucosIIÁË.
	u32 reload;
#endif
	SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK_Div8);	//Ñ¡ÔñÍⲿʱÖÓ  HCLK/8
	fac_us=SystemCoreClock/8000000;	//ΪϵͳʱÖÓµÄ1/8  
	 
#ifdef OS_CRITICAL_METHOD 	//Èç¹ûOS_CRITICAL_METHOD¶¨ÒåÁË,˵Ã÷ʹÓÃucosIIÁË.
	reload=SystemCoreClock/8000000;		//ÿÃëÖӵļÆÊý´ÎÊý µ¥Î>>ΪK	   
	reload*=1000000/OS_TICKS_PER_SEC;//¸ù¾ÝOS_TICKS_PER_SECÉ趨Òç³öʱ¼ä
							//reloadΪ24Î>>¼Ä´æÆ÷,×î´óÖµ:16777216,ÔÚ72MÏÂ,Ô¼ºÏ1.86s×óÓÒ	
	fac_ms=1000/OS_TICKS_PER_SEC;//´ú±íucos¿ÉÒÔÑÓʱµÄ×îÉÙµ¥Î>>	   
	SysTick->CTRL|=SysTick_CTRL_TICKINT_Msk;   	//¿ªÆôSYSTICKÖжÏ
	SysTick->LOAD=reload; 	//ÿ1/OS_TICKS_PER_SECÃëÖжÏÒ>>´Î	
	SysTick->CTRL|=SysTick_CTRL_ENABLE_Msk;   	//¿ªÆôSYSTICK    
#else
	fac_ms=(u16)fac_us*1000;//·ÇucosÏÂ,´ú±íÿ¸ömsÐèÒªµÄsystickʱÖÓÊý   
#endif
}								    

#ifdef OS_CRITICAL_METHOD	//ʹÓÃÁËucos
//ÑÓʱnus
//nusΪҪÑÓʱµÄusÊý.		    								   
void delay_us(u32 nus)
{		
	u32 ticks;
	u32 told,tnow,tcnt=0;
	u32 reload=SysTick->LOAD;	//LOADµÄÖµ	    	 
	ticks=nus*fac_us; 			//ÐèÒªµÄ½ÚÅÄÊý	  		 
	tcnt=0;
	told=SysTick->VAL;        	//¸Õ½øÈëʱµÄ¼ÆÊýÆ÷Öµ
	while(1)
	{
		tnow=SysTick->VAL;	
		if(tnow!=told)
		{	    
			if(tnow<told)tcnt+=told-tnow;//ÕâÀï×¢ÒâÒ>>ÏÂSYSTICKÊÇÒ>>¸öµÝ¼õµÄ¼ÆÊýÆ÷¾Í¿ÉÒÔÁË.
			else tcnt+=reload-tnow+told;	    
			told=tnow;
			if(tcnt>=ticks)break;//ʱ¼ä³¬¹ý/µÈÓÚÒªÑÓ³ÙµÄʱ¼ä,ÔòÍ˳ö.
		}  
	}; 									    
}
//ÑÓʱnms
//nms:ÒªÑÓʱµÄmsÊý
void delay_ms(u16 nms)
{	
	if(OSRunning==TRUE)//Èç¹ûosÒѾ­ÔÚÅÜÁË	    
	{		  
		if(nms>=fac_ms)//ÑÓʱµÄʱ¼ä´óÓÚucosµÄ×îÉÙʱ¼äÖÜÆÚ 
		{
   			OSTimeDly(nms/fac_ms);//ucosÑÓʱ
		}
		nms%=fac_ms;				//ucosÒѾ­ÎÞ·¨ÌṩÕâôСµÄÑÓʱÁË,²ÉÓÃÆÕͨ·½Ê½ÑÓʱ    
	}
	delay_us((u32)(nms*1000));	//ÆÕͨ·½Ê½ÑÓʱ,´ËʱucosÎÞ·¨Æô¶¯µ÷¶È.
}
#else//²>>ÓÃucosʱ
//ÑÓʱnus
//nusΪҪÑÓʱµÄusÊý.		    								   
void delay_us(u32 nus)
{		
	u32 temp;	    	 
	SysTick->LOAD=nus*fac_us; //ʱ¼ä¼ÓÔØ	  		 
	SysTick->VAL=0x00;        //Çå¿Õ¼ÆÊýÆ÷
	SysTick->CTRL|=SysTick_CTRL_ENABLE_Msk ;          //¿ªÊ¼µ¹Êý	 
	do
	{
		temp=SysTick->CTRL;
	}
	while(temp&0x01&&!(temp&(1<<16)));//µÈ´ýʱ¼äµ½´ï   
	SysTick->CTRL&=~SysTick_CTRL_ENABLE_Msk;       //¹Ø±Õ¼ÆÊýÆ÷
	SysTick->VAL =0X00;       //Çå¿Õ¼ÆÊýÆ÷	 
}
//ÑÓʱnms
//×¢ÒânmsµÄ·¶Î§
//SysTick->LOADΪ24Î>>¼Ä´æÆ÷,ËùÒÔ,×î´óÑÓʱΪ:
//nms<=0xffffff*8*1000/SYSCLK
//SYSCLKµ¥Î>>ΪHz,nmsµ¥Î>>Ϊms
//¶Ô72MÌõ¼þÏÂ,nms<=1864 
void delay_ms(u16 nms)
{	 		  	  
	u32 temp;		   
	SysTick->LOAD=(u32)nms*fac_ms;//ʱ¼ä¼ÓÔØ(SysTick->LOADΪ24bit)
	SysTick->VAL =0x00;           //Çå¿Õ¼ÆÊýÆ÷
	SysTick->CTRL|=SysTick_CTRL_ENABLE_Msk ;          //¿ªÊ¼µ¹Êý  
	do
	{
		temp=SysTick->CTRL;
	}
	while(temp&0x01&&!(temp&(1<<16)));//µÈ´ýʱ¼äµ½´ï   
	SysTick->CTRL&=~SysTick_CTRL_ENABLE_Msk;       //¹Ø±Õ¼ÆÊýÆ÷
	SysTick->VAL =0X00;       //Çå¿Õ¼ÆÊýÆ÷	  	    
} 
#endif

delay.h

c 复制代码 
#ifndef __DELAY_H
#define __DELAY_H 			   
#include "sys.h"
//	 
//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
//ʹÓÃSysTickµÄÆÕͨ¼ÆÊýģʽ¶ÔÑÓ³Ù½øÐйÜÀí
//°üÀ¨delay_us,delay_ms
// 	 
void delay_init(void);
void delay_ms(u16 nms);
void delay_us(u32 nus);

#endif

sys.c

c 复制代码 
#include "sys.h"

//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
//	 
//STM32¿ª·¢°å
//ϵͳÖжϷÖ×éÉèÖÃ>>¯		   
//********************************************************************************  
void NVIC_Configuration(void)
{
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);	//ÉèÖÃNVICÖжϷÖ×é2:2Î>>ÇÀÕ¼ÓÅÏȼ¶£¬2Î>>ÏìÓ¦ÓÅÏȼ¶
}

sys.h

c 复制代码 
#ifndef __SYS_H
#define __SYS_H	
#include "stm32f10x.h"
//	 
//STM32F103ºËÐÄ°åÀý³Ì
//¿âº¯Êý°æ±¾Àý³Ì
/********** mcudev.taobao.com ³öÆ·  ********/
// 	 
//0,²>>Ö§³Öucos
//1,Ö§³Öucos
#define SYSTEM_SUPPORT_UCOS		0		//¶¨ÒåϵͳÎļþ¼ÐÊÇ·ñÖ§³ÖUCOS
																	    
	 
//Î>>´ø²Ù×÷,ʵÏÖ51ÀàËƵÄGPIO¿ØÖƹ¦ÄÜ
//¾ßÌåʵÏÖ˼Ïë,²Î¿¼<<CM3ȨÍþÖ¸ÄÏ>>µÚÎåÕÂ(87Ò³~92Ò³).
//IO¿Ú²Ù×÷ºê¶¨Òå
#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2)) 
#define MEM_ADDR(addr)  *((volatile unsigned long  *)(addr)) 
#define BIT_ADDR(addr, bitnum)   MEM_ADDR(BITBAND(addr, bitnum)) 
//IO¿ÚµØÖ·Ó³Éä
#define GPIOA_ODR_Addr    (GPIOA_BASE+12) //0x4001080C 
#define GPIOB_ODR_Addr    (GPIOB_BASE+12) //0x40010C0C 
#define GPIOC_ODR_Addr    (GPIOC_BASE+12) //0x4001100C 
#define GPIOD_ODR_Addr    (GPIOD_BASE+12) //0x4001140C 
#define GPIOE_ODR_Addr    (GPIOE_BASE+12) //0x4001180C 
#define GPIOF_ODR_Addr    (GPIOF_BASE+12) //0x40011A0C    
#define GPIOG_ODR_Addr    (GPIOG_BASE+12) //0x40011E0C    

#define GPIOA_IDR_Addr    (GPIOA_BASE+8) //0x40010808 
#define GPIOB_IDR_Addr    (GPIOB_BASE+8) //0x40010C08 
#define GPIOC_IDR_Addr    (GPIOC_BASE+8) //0x40011008 
#define GPIOD_IDR_Addr    (GPIOD_BASE+8) //0x40011408 
#define GPIOE_IDR_Addr    (GPIOE_BASE+8) //0x40011808 
#define GPIOF_IDR_Addr    (GPIOF_BASE+8) //0x40011A08 
#define GPIOG_IDR_Addr    (GPIOG_BASE+8) //0x40011E08 
 
//IO¿Ú²Ù×÷,Ö>>¶Ôµ¥Ò>>µÄIO¿Ú!
//È·±£nµÄֵСÓÚ16!
#define PAout(n)   BIT_ADDR(GPIOA_ODR_Addr,n)  //Êä³ö 
#define PAin(n)    BIT_ADDR(GPIOA_IDR_Addr,n)  //ÊäÈë 

#define PBout(n)   BIT_ADDR(GPIOB_ODR_Addr,n)  //Êä³ö 
#define PBin(n)    BIT_ADDR(GPIOB_IDR_Addr,n)  //ÊäÈë 

#define PCout(n)   BIT_ADDR(GPIOC_ODR_Addr,n)  //Êä³ö 
#define PCin(n)    BIT_ADDR(GPIOC_IDR_Addr,n)  //ÊäÈë 

#define PDout(n)   BIT_ADDR(GPIOD_ODR_Addr,n)  //Êä³ö 
#define PDin(n)    BIT_ADDR(GPIOD_IDR_Addr,n)  //ÊäÈë 

#define PEout(n)   BIT_ADDR(GPIOE_ODR_Addr,n)  //Êä³ö 
#define PEin(n)    BIT_ADDR(GPIOE_IDR_Addr,n)  //ÊäÈë

#define PFout(n)   BIT_ADDR(GPIOF_ODR_Addr,n)  //Êä³ö 
#define PFin(n)    BIT_ADDR(GPIOF_IDR_Addr,n)  //ÊäÈë

#define PGout(n)   BIT_ADDR(GPIOG_ODR_Addr,n)  //Êä³ö 
#define PGin(n)    BIT_ADDR(GPIOG_IDR_Addr,n)  //ÊäÈë

void NVIC_Configuration(void);

#endif

把usart.c，bsp_i2c.c，delay.c，sys.c加到keil工程文件中后，把产生的hex文件烧录到stm32中，打开串口调试助手，即可看到实验结果。

相关推荐
蓝斯49713 小时前
从.到实现一个Windows上的虚拟hid键盘设备
windows·单片机·计算机外设
熙芯XiChip14 小时前
硬实时与软实时RTOS核心区别
嵌入式硬件
伟大的前程14 小时前
unsigned int 定义的变量 在 电脑的 64 位系统中 和 32 位 cortex-m0 和 8 位的 51 单片机
单片机·嵌入式硬件
小渔村的拉线工15 小时前
1.HPM6E80 解析芯片整体工作原理和存储架构
单片机·嵌入式硬件·mcu·架构·hpm6e80
熙芯XiChip16 小时前
CAN与CANopen的本质区别
单片机
lilihewo16 小时前
Altium Designer 封装库的创建（分享pcb 3D封装库）
嵌入式硬件·51单片机
神罚天下ET17 小时前
典型arm位单片机启动流程(从上电到main.c)
c语言·arm开发·单片机
碧海银沙音频科技研究院18 小时前
蓝牙耳机使用WSDF5361锂保芯片进入船运模式实现方法
嵌入式硬件·算法
Zevalin爱灰灰18 小时前
模拟信号链电路——基于TL431的电压基准电路
单片机·嵌入式硬件
csdn杰哥19 小时前
瑞萨单片机开发教程[二十七] DTC 外部中断触发传输实验
单片机·嵌入式硬件·mongodb·瑞萨·ra6m5
热门推荐
01如何新建文件夹？ 电脑新建文件夹的4种方法02GitHub 镜像站点03国内可直接用、免费额度/永久免费的大模型API清单（含 SiliconFlow、火山、阿里、智谱、百度、Kimi、DeepSeek、DMXAPI 等）0400 Debian字符界面如何支持中文05微信历史版本含下载地址（ Windows PC | 安卓 | MAC ）及设置微信不更新062026 国产 AI 大模型横评：DeepSeek、通义千问、Kimi、文心一言、星火、豆包谁更能打？07AI 编程 IDE 全景解析 2026：Agent 全面接管开发链路082026年7月AI圈大地震：GPT-5.6被政府限制、Claude入驻Slack、Anthropic自研芯片09Agnes AI 免费 API 接入指南：文本、生图、生视频，一套接口全免费102026 年 AI 大模型 & AI 编程工具实战全总结