30V/3A降压DCDC转换器CP8335封装可适用汽车系统

特点

● Wide Input Voltage Range: 6V ~ 30V

● Low RDS(ON) for Internal Switches

(Top/Bottom): 90mΩ/65 mΩ

● 3A output current capability

● 500kHz Switching Frequency Minimize the

External Components

● Internal 1.5-ms Soft-Start

● 0.6V/0.8V/0.925V Voltage Reference with ±0.8%

Accuracy

● Current Mode Control

● Pulse Skipping for Light-Load Efficiency

● Hic-cup Mode Output Short Circuit Protection

● Compact Package: ESOP8

● Protection

Under Voltage Protection (UVP)

Over Voltage Protection (OVP)

Over Current Protection (OCP)

Short Circuit Protection (SCP)

Over Thermal Protection (OTP)

应用

● Automotive Systems

● Network Terminal Equipment

● Security Monitoring Camera

● Printer Systems

● Industrial Power Systems

● Distributed Power Systems

概述

The CP8335 is synchronous converters with an

input-voltage range of 6V to 30V. It has an integrated

low-side switching FET that eliminates the need for

an external diode which reduces component count.

Efficiency is maximized through the integrated

90-mΩ and 65-mΩ MOSFETs, low IQ and pulse

skipping at light loads. Using the enable pin, the

shutdown supply current is reduced to 2μA. This

step-down (buck) converter provides accurate

regulation for a variety of loads with a well regulated

voltage reference that is 1.5% over temperature.

Cycle-by-cycle current limiting on the high-side

MOSFET protects the CP8335 in overload situations

and is enhanced by a low-side sourcing current limit

which prevents current runaway. A low-side sinking

current-limit turns off the low-side MOSFET to

prevent excessive reverse current.

Hiccup protection is triggered if the overcurrent

condition continues for longer than the preset time.

Thermal shutdown disables the device when the die

temperature exceeds the threshold and enables the

device again after the built-in thermal hiccup time.

外围电路设计

封装引脚定义


型号选择

相关推荐
傻啦嘿哟2 小时前
探索科技的边界:代理IP与汽车产业链的创新之旅
科技·tcp/ip·汽车
YisquareTech3 小时前
汽车零配件供应商如何通过EDI与主机厂生产采购流程结合
汽车·汽车edi
六六王19 小时前
文献×汽车 | 基于 ANSYS 的多级抛物线板簧系统分析
汽车·仿真·ansys·workbench·结构振动·有限元仿真
TMT星球1 天前
商汤绝影生成式AI汽车新品亮相上海车展,引领AI汽车创新潮流
人工智能·汽车
车载诊断技术1 天前
不同ECU(MCU/ZCU/CCU)其部署(实现)的功能存在差异
单片机·嵌入式硬件·架构·汽车·电子电器架构·软件定义汽车的电子/电气
国科安芯1 天前
面向高性能运动控制的MCU:架构创新、算法优化与应用分析
单片机·嵌入式硬件·安全·架构·机器人·汽车·risc-v
HiEV2 天前
最高支持高速L3商用,华为发布ADS 4智驾系统
自动驾驶·汽车
虹科Pico汽车示波器2 天前
汽车免拆诊断案例 | 2016款奔驰C200L车组合仪表上多个故障灯偶尔点亮
汽车·汽车示波器·can总线·汽修案例·波形诊断·通信总线·奔驰c200
天天爱吃肉82182 天前
电动汽车域控制器:技术深度解析与未来趋势展望
汽车
aiden:)2 天前
UML 状态图:以共享汽车系统状态图为例
汽车·软件工程·软件构建·uml