Nacos适用Postgresql改造记录

sptan2025-12-14 10:46

从nacos官网fork出来，采用分支为v2.x-develop。

fork后的git地址：

github.com/sptan/nacos

添加postgresql依赖

在项目的xml文件中全局搜索mysql，有mysql 的地方就加上postgresql的驱动。

pom.xml

persistence/pom.xml

naming/pom.xml

这个好像不引人也行，不过本着让postgresql与mysql平级的待遇，就一块加上吧。

引入驱动后，代码变动情况如下：

nacos-persistence模块改造

在这个模块中搜索mysql，在mysql附近增加postgresql的常量。

外部DataSource目前固定为mysql，需要修改为可配置。

nacos-plugin模块改造

这是改动比较多的模块，需要加入postgresql对应的实现，我主要是从mysql复制过来的，差异比较大的主要是分页不同。

DataSourceConstant的代码：

TrustedPostgresqlFunctionEnum的代码

各个表的访问类的代码示例：

主要是记得以下几项修改：

  1. sql中的分页
  2. DataSource
  3. where.limit改为where.limitPG

各个实现类的都雷同。

这个要加一下，否则Map的实现类找不到postgresql的：

default-auth-plugin模块改造

  1. 添加postgresql适用的OFFSET_LIMIT常量
  1. 增加postgresql分页适配器
  1. 适配器工厂中增加postgresql分页适配器

在PG中建立nacos数据库及表

建表语句如下

sql 复制代码 
/*
 * Copyright 1999-2018 Alibaba Group Holding Ltd.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

-- ----------------------------
-- Table structure for config_info
-- ----------------------------
DROP TABLE IF EXISTS "his_config_info";
CREATE TABLE "his_config_info" (
  "id" int8 NOT NULL,
  "nid" bigserial NOT NULL,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "app_name" varchar(128) ,
  "content" text  NOT NULL,
  "md5" varchar(32) ,
  "gmt_create" timestamp(6) NOT NULL  DEFAULT '2010-05-05 00:00:00',
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text ,
  "src_ip" varchar(20) ,
  "op_type" char(10) ,
  "publish_type" varchar(128),
  "gray_name" varchar(128),
  "ext_info" text,
  "tenant_id" varchar(128) ,
  "encrypted_data_key" text  NOT NULL
)
;

COMMENT ON COLUMN "config_info"."id" IS 'id';
COMMENT ON COLUMN "config_info"."data_id" IS 'data_id';
COMMENT ON COLUMN "config_info"."content" IS 'content';
COMMENT ON COLUMN "config_info"."md5" IS 'md5';
COMMENT ON COLUMN "config_info"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "config_info"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "config_info"."src_user" IS 'source user';
COMMENT ON COLUMN "config_info"."src_ip" IS 'source ip';
COMMENT ON COLUMN "config_info"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "config_info"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "config_info" IS 'config_info';


-- ----------------------------
-- Table structure for config_info_aggr
-- ----------------------------
DROP TABLE IF EXISTS "config_info_aggr";
CREATE TABLE "config_info_aggr" (
  "id" bigserial NOT NULL,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(255)  NOT NULL,
  "datum_id" varchar(255)  NOT NULL,
  "content" text  NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "app_name" varchar(128) ,
  "tenant_id" varchar(128) 
)
;
COMMENT ON COLUMN "config_info_aggr"."id" IS 'id';
COMMENT ON COLUMN "config_info_aggr"."data_id" IS 'data_id';
COMMENT ON COLUMN "config_info_aggr"."group_id" IS 'group_id';
COMMENT ON COLUMN "config_info_aggr"."datum_id" IS 'datum_id';
COMMENT ON COLUMN "config_info_aggr"."content" IS '内容';
COMMENT ON COLUMN "config_info_aggr"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "config_info_aggr"."tenant_id" IS '租户字段';
COMMENT ON TABLE "config_info_aggr" IS '增加租户字段';

-- ----------------------------
-- Records of config_info_aggr
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for config_info_beta
-- ----------------------------
DROP TABLE IF EXISTS "config_info_beta";
CREATE TABLE "config_info_beta" (
  "id" bigserial NOT NULL,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "app_name" varchar(128) ,
  "content" text  NOT NULL,
  "beta_ips" varchar(1024) ,
  "md5" varchar(32) ,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text ,
  "src_ip" varchar(20) ,
  "tenant_id" varchar(128) ,
  "encrypted_data_key" text  NOT NULL
)
;
COMMENT ON COLUMN "config_info_beta"."id" IS 'id';
COMMENT ON COLUMN "config_info_beta"."data_id" IS 'data_id';
COMMENT ON COLUMN "config_info_beta"."group_id" IS 'group_id';
COMMENT ON COLUMN "config_info_beta"."app_name" IS 'app_name';
COMMENT ON COLUMN "config_info_beta"."content" IS 'content';
COMMENT ON COLUMN "config_info_beta"."beta_ips" IS 'betaIps';
COMMENT ON COLUMN "config_info_beta"."md5" IS 'md5';
COMMENT ON COLUMN "config_info_beta"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "config_info_beta"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "config_info_beta"."src_user" IS 'source user';
COMMENT ON COLUMN "config_info_beta"."src_ip" IS 'source ip';
COMMENT ON COLUMN "config_info_beta"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "config_info_beta"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "config_info_beta" IS 'config_info_beta';

-- ----------------------------
-- Records of config_info_beta
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for config_info_tag
-- ----------------------------
DROP TABLE IF EXISTS "config_info_tag";
CREATE TABLE "config_info_tag" (
  "id" bigserial NOT NULL,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "tenant_id" varchar(128) ,
  "tag_id" varchar(128)  NOT NULL,
  "app_name" varchar(128) ,
  "content" text  NOT NULL,
  "md5" varchar(32) ,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text ,
  "src_ip" varchar(20) 
)
;
COMMENT ON COLUMN "config_info_tag"."id" IS 'id';
COMMENT ON COLUMN "config_info_tag"."data_id" IS 'data_id';
COMMENT ON COLUMN "config_info_tag"."group_id" IS 'group_id';
COMMENT ON COLUMN "config_info_tag"."tenant_id" IS 'tenant_id';
COMMENT ON COLUMN "config_info_tag"."tag_id" IS 'tag_id';
COMMENT ON COLUMN "config_info_tag"."app_name" IS 'app_name';
COMMENT ON COLUMN "config_info_tag"."content" IS 'content';
COMMENT ON COLUMN "config_info_tag"."md5" IS 'md5';
COMMENT ON COLUMN "config_info_tag"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "config_info_tag"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "config_info_tag"."src_user" IS 'source user';
COMMENT ON COLUMN "config_info_tag"."src_ip" IS 'source ip';
COMMENT ON TABLE "config_info_tag" IS 'config_info_tag';

-- ----------------------------
-- Records of config_info_tag
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for config_tags_relation
-- ----------------------------
DROP TABLE IF EXISTS "config_tags_relation";
CREATE TABLE "config_tags_relation" (
  "id" bigserial NOT NULL,
  "tag_name" varchar(128)  NOT NULL,
  "tag_type" varchar(64) ,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "tenant_id" varchar(128) ,
  "nid" bigserial NOT NULL
)
;
COMMENT ON COLUMN "config_tags_relation"."id" IS 'id';
COMMENT ON COLUMN "config_tags_relation"."tag_name" IS 'tag_name';
COMMENT ON COLUMN "config_tags_relation"."tag_type" IS 'tag_type';
COMMENT ON COLUMN "config_tags_relation"."data_id" IS 'data_id';
COMMENT ON COLUMN "config_tags_relation"."group_id" IS 'group_id';
COMMENT ON COLUMN "config_tags_relation"."tenant_id" IS 'tenant_id';
COMMENT ON TABLE "config_tags_relation" IS 'config_tag_relation';

-- ----------------------------
-- Records of config_tags_relation
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for group_capacity
-- ----------------------------
DROP TABLE IF EXISTS "group_capacity";
CREATE TABLE "group_capacity" (
  "id" bigserial NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "quota" int4 NOT NULL,
  "usage" int4 NOT NULL,
  "max_size" int4 NOT NULL,
  "max_aggr_count" int4 NOT NULL,
  "max_aggr_size" int4 NOT NULL,
  "max_history_count" int4 NOT NULL,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL
)
;
COMMENT ON COLUMN "group_capacity"."id" IS '主键ID';
COMMENT ON COLUMN "group_capacity"."group_id" IS 'Group ID，空字符表示整个集群';
COMMENT ON COLUMN "group_capacity"."quota" IS '配额，0表示使用默认值';
COMMENT ON COLUMN "group_capacity"."usage" IS '使用量';
COMMENT ON COLUMN "group_capacity"."max_size" IS '单个配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "group_capacity"."max_aggr_count" IS '聚合子配置最大个数，，0表示使用默认值';
COMMENT ON COLUMN "group_capacity"."max_aggr_size" IS '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "group_capacity"."max_history_count" IS '最大变更历史数量';
COMMENT ON COLUMN "group_capacity"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "group_capacity"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "group_capacity" IS '集群、各Group容量信息表';

-- ----------------------------
-- Records of group_capacity
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for his_config_info
-- ----------------------------
DROP TABLE IF EXISTS "his_config_info";
CREATE TABLE "his_config_info" (
  "id" int8 NOT NULL,
  "nid" bigserial NOT NULL,
  "data_id" varchar(255)  NOT NULL,
  "group_id" varchar(128)  NOT NULL,
  "app_name" varchar(128) ,
  "content" text  NOT NULL,
  "md5" varchar(32) ,
  "gmt_create" timestamp(6) NOT NULL  DEFAULT '2010-05-05 00:00:00',
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text ,
  "src_ip" varchar(20) ,
  "op_type" char(10) ,
  "publish_type" varchar(128),
  "tenant_id" varchar(128) ,
  "encrypted_data_key" text  NOT NULL
)
;
COMMENT ON COLUMN "his_config_info"."app_name" IS 'app_name';
COMMENT ON COLUMN "his_config_info"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "his_config_info"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "his_config_info" IS '多租户改造';


-- ----------------------------
-- Table structure for permissions
-- ----------------------------
DROP TABLE IF EXISTS "permissions";
CREATE TABLE "permissions" (
  "role" varchar(50)  NOT NULL,
  "resource" varchar(512)  NOT NULL,
  "action" varchar(8)  NOT NULL
)
;

-- ----------------------------
-- Records of permissions
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for roles
-- ----------------------------
DROP TABLE IF EXISTS "roles";
CREATE TABLE "roles" (
  "username" varchar(50)  NOT NULL,
  "role" varchar(50)  NOT NULL
)
;

-- ----------------------------
-- Records of roles
-- ----------------------------
BEGIN;
INSERT INTO "roles" VALUES ('nacos', 'ROLE_ADMIN');
COMMIT;

-- ----------------------------
-- Table structure for tenant_capacity
-- ----------------------------
DROP TABLE IF EXISTS "tenant_capacity";
CREATE TABLE "tenant_capacity" (
  "id" bigserial NOT NULL,
  "tenant_id" varchar(128)  NOT NULL,
  "quota" int4 NOT NULL,
  "usage" int4 NOT NULL,
  "max_size" int4 NOT NULL,
  "max_aggr_count" int4 NOT NULL,
  "max_aggr_size" int4 NOT NULL,
  "max_history_count" int4 NOT NULL,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL
)
;
COMMENT ON COLUMN "tenant_capacity"."id" IS '主键ID';
COMMENT ON COLUMN "tenant_capacity"."tenant_id" IS 'Tenant ID';
COMMENT ON COLUMN "tenant_capacity"."quota" IS '配额，0表示使用默认值';
COMMENT ON COLUMN "tenant_capacity"."usage" IS '使用量';
COMMENT ON COLUMN "tenant_capacity"."max_size" IS '单个配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "tenant_capacity"."max_aggr_count" IS '聚合子配置最大个数';
COMMENT ON COLUMN "tenant_capacity"."max_aggr_size" IS '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "tenant_capacity"."max_history_count" IS '最大变更历史数量';
COMMENT ON COLUMN "tenant_capacity"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "tenant_capacity"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "tenant_capacity" IS '租户容量信息表';

-- ----------------------------
-- Records of tenant_capacity
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for tenant_info
-- ----------------------------
DROP TABLE IF EXISTS "tenant_info";
CREATE TABLE "tenant_info" (
  "id" bigserial NOT NULL,
  "kp" varchar(128)  NOT NULL,
  "tenant_id" varchar(128) ,
  "tenant_name" varchar(128) ,
  "tenant_desc" varchar(256) ,
  "create_source" varchar(32) ,
  "gmt_create" int8 NOT NULL,
  "gmt_modified" int8 NOT NULL
)
;
COMMENT ON COLUMN "tenant_info"."id" IS 'id';
COMMENT ON COLUMN "tenant_info"."kp" IS 'kp';
COMMENT ON COLUMN "tenant_info"."tenant_id" IS 'tenant_id';
COMMENT ON COLUMN "tenant_info"."tenant_name" IS 'tenant_name';
COMMENT ON COLUMN "tenant_info"."tenant_desc" IS 'tenant_desc';
COMMENT ON COLUMN "tenant_info"."create_source" IS 'create_source';
COMMENT ON COLUMN "tenant_info"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "tenant_info"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "tenant_info" IS 'tenant_info';

-- ----------------------------
-- Records of tenant_info
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for users
-- ----------------------------
DROP TABLE IF EXISTS "users";
CREATE TABLE "users" (
  "username" varchar(50)  NOT NULL,
  "password" varchar(500)  NOT NULL,
  "enabled" boolean NOT NULL
)
;

-- ----------------------------
-- Records of users
-- ----------------------------
BEGIN;
INSERT INTO "users" VALUES ('nacos', '$2a$10$EuWPZHzz32dJN7jexM34MOeYirDdFAZm2kuWj7VEOJhhZkDrxfvUu', TRUE);
COMMIT;

-- ----------------------------
-- Indexes structure for table config_info
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfo_datagrouptenant" ON "config_info" ("data_id","group_id","tenant_id");

-- ----------------------------
-- Primary Key structure for table config_info
-- ----------------------------
ALTER TABLE "config_info" ADD CONSTRAINT "config_info_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_aggr
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfoaggr_datagrouptenantdatum" ON "config_info_aggr" USING btree ("data_id","group_id","tenant_id","datum_id");

-- ----------------------------
-- Primary Key structure for table config_info_aggr
-- ----------------------------
ALTER TABLE "config_info_aggr" ADD CONSTRAINT "config_info_aggr_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_beta
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfobeta_datagrouptenant" ON "config_info_beta" USING btree ("data_id","group_id","tenant_id");

-- ----------------------------
-- Primary Key structure for table config_info_beta
-- ----------------------------
ALTER TABLE "config_info_beta" ADD CONSTRAINT "config_info_beta_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_tag
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfotag_datagrouptenanttag" ON "config_info_tag" USING btree ("data_id","group_id","tenant_id","tag_id");

-- ----------------------------
-- Primary Key structure for table config_info_tag
-- ----------------------------
ALTER TABLE "config_info_tag" ADD CONSTRAINT "config_info_tag_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_tags_relation
-- ----------------------------
CREATE INDEX "idx_tenant_id" ON "config_tags_relation" USING btree (
  "tenant_id"
);
CREATE UNIQUE INDEX "uk_configtagrelation_configidtag" ON "config_tags_relation" USING btree (
  "id",
  "tag_name",
  "tag_type"
);

-- ----------------------------
-- Primary Key structure for table config_tags_relation
-- ----------------------------
ALTER TABLE "config_tags_relation" ADD CONSTRAINT "config_tags_relation_pkey" PRIMARY KEY ("nid");

-- ----------------------------
-- Indexes structure for table group_capacity
-- ----------------------------
CREATE UNIQUE INDEX "uk_group_id" ON "group_capacity" USING btree (
  "group_id"
);

-- ----------------------------
-- Primary Key structure for table group_capacity
-- ----------------------------
ALTER TABLE "group_capacity" ADD CONSTRAINT "group_capacity_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table his_config_info
-- ----------------------------
CREATE INDEX "idx_did" ON "his_config_info" USING btree (
  "data_id"
);
CREATE INDEX "idx_gmt_create" ON "his_config_info" USING btree (
  "gmt_create"
);
CREATE INDEX "idx_gmt_modified" ON "his_config_info" USING btree (
  "gmt_modified"
);

-- ----------------------------
-- Primary Key structure for table his_config_info
-- ----------------------------
ALTER TABLE "his_config_info" ADD CONSTRAINT "his_config_info_pkey" PRIMARY KEY ("nid");

-- ----------------------------
-- Indexes structure for table permissions
-- ----------------------------
CREATE UNIQUE INDEX "uk_role_permission" ON "permissions" USING btree (
  "role",
  "resource",
  "action"
);

-- ----------------------------
-- Indexes structure for table roles
-- ----------------------------
CREATE UNIQUE INDEX "uk_username_role" ON "roles" USING btree (
  "username",
  "role"
);

-- ----------------------------
-- Indexes structure for table tenant_capacity
-- ----------------------------
CREATE UNIQUE INDEX "uk_tenant_id" ON "tenant_capacity" USING btree (
  "tenant_id"
);

-- ----------------------------
-- Primary Key structure for table tenant_capacity
-- ----------------------------
ALTER TABLE "tenant_capacity" ADD CONSTRAINT "tenant_capacity_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table tenant_info
-- ----------------------------
CREATE UNIQUE INDEX "uk_tenant_info_kptenantid" ON "tenant_info" USING btree (
  "kp",
  "tenant_id"
);

上面的SQL是官方的，莫名没有config_info_gray的表结构，我添加一个：

sql 复制代码 
-- auto-generated definition
create table config_info_gray
(
    id                 serial
        primary key,
    data_id            varchar(255)                           not null,
    group_id           varchar(128)                           not null,
    content            text                                   not null,
    md5                varchar(32)  default NULL::character varying,
    src_user           text,
    src_ip             varchar(100) default NULL::character varying,
    gmt_create         timestamp(3) default CURRENT_TIMESTAMP not null,
    gmt_modified       timestamp(3) default CURRENT_TIMESTAMP not null,
    app_name           varchar(128) default NULL::character varying,
    tenant_id          varchar(128) default ''::character varying,
    gray_name          varchar(128)                           not null,
    gray_rule          text                                   not null,
    encrypted_data_key varchar(256) default ''::character varying
);

comment on table config_info_gray is 'config_info_gray';

alter table config_info_gray
    owner to liupeng;

create unique index uk_configinfogray_datagrouptenantgray
    on config_info_gray (data_id, group_id, tenant_id, gray_name);

create index idx_configinfogray_dataid_gmt_modified
    on config_info_gray (data_id, gmt_modified);

create index idx_configinfogray_gmt_modified
    on config_info_gray (gmt_modified);

IDE中运行看效果

Nacos主类在nacos-console模块中

修改application.properties配置文件

ini 复制代码 
#
# Copyright 1999-2018 Alibaba Group Holding Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#*************** Spring Boot Related Configurations ***************#
### Default web context path:
server.servlet.contextPath=/nacos
### Include message field
server.error.include-message=ALWAYS
### Default web server port:
server.port=8848

#*************** Network Related Configurations ***************#
### If prefer hostname over ip for Nacos server addresses in cluster.conf:
# nacos.inetutils.prefer-hostname-over-ip=false

### Specify local server's IP:
# nacos.inetutils.ip-address=

#*************** Config Module Related Configurations ***************#
### Deprecated configuration property, it is recommended to use `spring.sql.init.platform` replaced.
#spring.datasource.platform=postgresql
# nacos.plugin.datasource.log.enabled=true
spring.sql.init.platform=postgresql
### Count of DB:
db.num=1

### Connect URL of DB:
# db.url.0=jdbc:mysql://127.0.0.1:3306/nacos?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true&useUnicode=true&useSSL=false&serverTimezone=UTC
# db.user=nacos
# db.password=nacos

db.url.0=jdbc:postgresql://127.0.0.1:5432/nacos
db.user=liupeng
db.password=123456

### Connection pool configuration: hikariCP
db.pool.config.driverClassName=org.postgresql.Driver
db.pool.config.connectionTimeout=30000
db.pool.config.validationTimeout=10000
db.pool.config.maximumPoolSize=20
db.pool.config.minimumIdle=2

### the maximum retry times for push
nacos.config.push.maxRetryTime=50

#*************** Naming Module Related Configurations ***************#
### Data dispatch task execution period in milliseconds:

### If enable data warmup. If set to false, the server would accept request without local data preparation:
# nacos.naming.data.warmup=true

### If enable the instance auto expiration, kind like of health check of instance:
# nacos.naming.expireInstance=true

nacos.naming.empty-service.auto-clean=true
nacos.naming.empty-service.clean.initial-delay-ms=50000
nacos.naming.empty-service.clean.period-time-ms=30000


#*************** CMDB Module Related Configurations ***************#
### The interval to dump external CMDB in seconds:
# nacos.cmdb.dumpTaskInterval=3600

### The interval of polling data change event in seconds:
# nacos.cmdb.eventTaskInterval=10

### The interval of loading labels in seconds:
# nacos.cmdb.labelTaskInterval=300

### If turn on data loading task:
# nacos.cmdb.loadDataAtStart=false
nacos.inetutils.ip-address=127.0.0.1
nacos.inetutils.prefer-ip-address=true

#*************** Metrics Related Configurations ***************#
### Metrics for prometheus
#management.endpoints.web.exposure.include=*

### Metrics for elastic search
management.metrics.export.elastic.enabled=false
#management.metrics.export.elastic.host=http://localhost:9200

### Metrics for influx
management.metrics.export.influx.enabled=false
#management.metrics.export.influx.db=springboot
#management.metrics.export.influx.uri=http://localhost:8086
#management.metrics.export.influx.auto-create-db=true
#management.metrics.export.influx.consistency=one
#management.metrics.export.influx.compressed=true

#*************** Access Log Related Configurations ***************#
### If turn on the access log:
server.tomcat.accesslog.enabled=true

### accesslog automatic cleaning time
server.tomcat.accesslog.max-days=30

### The access log pattern:
server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D %{User-Agent}i %{Request-Source}i

### The directory of access log:
server.tomcat.basedir=file:.


#*************** Access Control Related Configurations ***************#
### If enable spring security, this option is deprecated in 1.2.0:
#spring.security.enabled=false
### The ignore urls of auth, is deprecated in 1.2.0:
nacos.security.ignore.urls=/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-ui/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**

### The auth system to use, currently only 'nacos' and 'ldap' is supported:
nacos.core.auth.system.type=nacos

### If turn on auth system:
nacos.core.auth.enabled=true

### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
nacos.core.auth.caching.enabled=false

### Since 1.4.1, Turn on/off white auth for user-agent: nacos-server, only for upgrade from old version.
nacos.core.auth.enable.userAgentAuthWhite=false

### Since 1.4.1, worked when nacos.core.auth.enabled=true and nacos.core.auth.enable.userAgentAuthWhite=false.
### The two properties is the white list for auth and used by identity the request from other server.
nacos.core.auth.server.identity.key=nacos
nacos.core.auth.server.identity.value=nacos

### worked when nacos.core.auth.system.type=nacos
### The token expiration in seconds:
nacos.core.auth.plugin.nacos.token.cache.enable=false
nacos.core.auth.plugin.nacos.token.expire.seconds=18000
### The default token (Base64 string):
nacos.core.auth.plugin.nacos.token.secret.key=SecretKey012345678901234567890123456789012345678901234567890123456789
#nacos.core.auth.plugin.nacos.token.secret.key=

### worked when nacos.core.auth.system.type=ldap，{0} is Placeholder,replace login username
#nacos.core.auth.ldap.url=ldap://localhost:389
#nacos.core.auth.ldap.basedc=dc=example,dc=org
#nacos.core.auth.ldap.userDn=cn=admin,${nacos.core.auth.ldap.basedc}
#nacos.core.auth.ldap.password=admin
#nacos.core.auth.ldap.userdn=cn={0},dc=example,dc=org
#nacos.core.auth.ldap.filter.prefix=uid
#nacos.core.auth.ldap.case.sensitive=true
#nacos.core.auth.ldap.ignore.partial.result.exception=false

#*************** Control Plugin Related Configurations ***************#
# plugin type
#nacos.plugin.control.manager.type=nacos

# local control rule storage dir, default ${nacos.home}/data/connection and ${nacos.home}/data/tps
#nacos.plugin.control.rule.local.basedir=${nacos.home}

# external control rule storage type, if exist
#nacos.plugin.control.rule.external.storage=

#*************** Config Change Plugin Related Configurations ***************#
# webhook
#nacos.core.config.plugin.webhook.enabled=false
# It is recommended to use EB https://help.aliyun.com/document_detail/413974.html
#nacos.core.config.plugin.webhook.url=http://localhost:8080/webhook/send?token=***
# The content push max capacity ,byte
#nacos.core.config.plugin.webhook.contentMaxCapacity=102400

# whitelist
#nacos.core.config.plugin.whitelist.enabled=false
# The import file suffixs
#nacos.core.config.plugin.whitelist.suffixs=xml,text,properties,yaml,html
# fileformatcheck,which validate the import file of type and content
#nacos.core.config.plugin.fileformatcheck.enabled=false

#*************** Istio Related Configurations ***************#
### If turn on the MCP server:
nacos.istio.mcp.server.enabled=false



###*************** Add from 1.3.0 ***************###


#*************** Core Related Configurations ***************#

### set the WorkerID manually
# nacos.core.snowflake.worker-id=

### Member-MetaData
# nacos.core.member.meta.site=
# nacos.core.member.meta.adweight=
# nacos.core.member.meta.weight=

### MemberLookup
### Addressing pattern category, If set, the priority is highest
# nacos.core.member.lookup.type=[file,address-server]
## Set the cluster list with a configuration file or command-line argument
# nacos.member.list=192.168.16.101:8847?raft_port=8807,192.168.16.101?raft_port=8808,192.168.16.101:8849?raft_port=8809
## for AddressServerMemberLookup
# Maximum number of retries to query the address server upon initialization
# nacos.core.address-server.retry=5
## Server domain name address of [address-server] mode
# address.server.domain=jmenv.tbsite.net
## Server port of [address-server] mode
# address.server.port=8080
## Request address of [address-server] mode
# address.server.url=/nacos/serverlist

#*************** JRaft Related Configurations ***************#

### Sets the Raft cluster election timeout, default value is 5 second
# nacos.core.protocol.raft.data.election_timeout_ms=5000
### Sets the amount of time the Raft snapshot will execute periodically, default is 30 minute
# nacos.core.protocol.raft.data.snapshot_interval_secs=30
### raft internal worker threads
# nacos.core.protocol.raft.data.core_thread_num=8
### Number of threads required for raft business request processing
# nacos.core.protocol.raft.data.cli_service_thread_num=4
### raft linear read strategy. Safe linear reads are used by default, that is, the Leader tenure is confirmed by heartbeat
# nacos.core.protocol.raft.data.read_index_type=ReadOnlySafe
### rpc request timeout, default 5 seconds
# nacos.core.protocol.raft.data.rpc_request_timeout_ms=5000
### enable to support prometheus service discovery
#nacos.prometheus.metrics.enabled=true

#*************** TLS Configuration ***************#
#nacos.remote.server.rpc.tls.enableTls=true
#nacos.remote.server.rpc.tls.certChainFile=file:{path of cert}
#nacos.remote.server.rpc.tls.certPrivateKey=file:{path of private key}

打包

运行测试没有问题后，可以打包了。

复制代码 
mvn clean -Prelease-nacos  install -U -DskipTests

生成好的包可以在这里下载

链接: pan.baidu.com/s/1DaV2Q8kt... 提取码: rrsa

相关推荐
okseekw5 小时前
Java网络编程从入门到实战：吃透三要素，玩转CS/BS架构
java·后端·http
我是你们的明哥5 小时前
A*（A-Star）算法详解：智能路径规划的核心技术
后端·算法
喷火龙8号5 小时前
JWT 认证方案深度对比：单 Token 扩展刷新 vs 双 Token 验证
后端·设计模式·架构
曾富贵5 小时前
【Prisma】NestJS 集成与核心链路解析
数据库·后端
起风了___5 小时前
Flask生产级模板：统一返回、日志、异常、JSON编解码，开箱即用可扩展
后端·python
我是你们的明哥5 小时前
从 N 个商品中找出总价最小的 K 个方案
后端·算法
骑着bug的coder5 小时前
第4讲:现代SQL高级特性——窗口函数与CTE
后端
Dwzun5 小时前
基于SpringBoot+Vue的农产品销售系统【附源码+文档+部署视频+讲解)
数据库·vue.js·spring boot·后端·毕业设计
y1y1z5 小时前
Spring Security教程
java·后端·spring
热门推荐
01GitHub 镜像站点02【超详细教程】手把手教你从微软官网免费下载Windows 10官方原版ISO镜像（2025最新版）03【AutoGLM部署】本地私有化部署AI手机Agent04UV安装并设置国内源05Open-AutoGLM Windows 安装部署教程06Linux下V2Ray安装配置指南07BongoCat - 跨平台键盘猫动画工具08安娜的档案(Anna’s Archive) 镜像网站/国内最新可访问入口（持续更新）09Cursor 又偷偷更新，这个功能太实用：Visual Editor for Cursor Browser10Windows 11 官方系统安装与重装完整教程（2025年最新版）