LoongArch 五级流水线实现

在单周期的基础上进行拆分成取指、译码、执行、访存、写回五级流水线。

mycpu_top.v
c 复制代码
`include "mycpu.h"

module id_stage(
    input                          clk           ,
    input                          reset         ,
    //allowin
    input                          es_allowin    ,
    output                         ds_allowin    ,
    //from fs
    input                          fs_to_ds_valid,
    input  [`FS_TO_DS_BUS_WD -1:0] fs_to_ds_bus  ,
    //to es
    output                         ds_to_es_valid,
    output [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus  ,
    //to fs
    output [`BR_BUS_WD       -1:0] br_bus        ,
    //to rf: for write back
    input  [`WS_TO_RF_BUS_WD -1:0] ws_to_rf_bus  

    //
    // output [ 4                 :0] WB_dest,EXE_dest,MEM_dest,

    // input                          es_load_op    ,
    // input  [31                 :0] EXE_result,MEM_result,WB_result
);
// wire         br_stall;        //增加
// wire         load_stall;
wire         br_taken;
reg          ds_valid   ;
wire [31:0]  br_target;



// assign br_bus       = {br_stall,br_taken,br_target};  //修改

wire        ds_ready_go;

wire [31                 :0] fs_pc;
reg  [`FS_TO_DS_BUS_WD -1:0] fs_to_ds_bus_r;
assign fs_pc = fs_to_ds_bus[31:0];

wire [31:0] ds_inst;
wire [31:0] ds_pc  ;
assign {ds_inst,
        ds_pc  } = fs_to_ds_bus_r;

wire        rf_we   ;
wire [ 4:0] rf_waddr;
wire [31:0] rf_wdata;
assign {rf_we   ,  //37:37
        rf_waddr,  //36:32
        rf_wdata   //31:0
       } = ws_to_rf_bus;



wire [11:0] alu_op;
wire        load_op;
wire        src1_is_pc;
wire        src2_is_imm;
wire        res_from_mem;
wire        gr_we;
wire        mem_we;
wire        src_reg_is_rd;
wire [ 4:0] dest;
wire [31:0] imm;
// wire [31:0] rs_value;
// wire [31:0] rt_value;
wire [31:0] rj_value,rkd_value;
wire [31:0] br_offs,jirl_offs;


wire [ 5:0] op_31_26;
wire [ 3:0] op_25_22;
wire [ 1:0] op_21_20;
wire [ 4:0] op_19_15;
wire [ 4:0] rd;
wire [ 4:0] rj;
wire [ 4:0] rk;
wire [11:0] i12;
wire [19:0] i20;
wire [15:0] i16;
wire [25:0] i26;

wire [63:0] op_31_26_d;
wire [15:0] op_25_22_d;
wire [ 3:0] op_21_20_d;
wire [31:0] op_19_15_d;

wire        inst_add_w;
wire        inst_sub_w;
wire        inst_slt;
wire        inst_sltu;
wire        inst_nor;
wire        inst_and;
wire        inst_or;
wire        inst_xor;
wire        inst_slli_w;
wire        inst_srli_w;
wire        inst_srai_w;
wire        inst_addi_w;
wire        inst_ld_w;
wire        inst_st_w;
wire        inst_jirl;
wire        inst_b;
wire        inst_bl;
wire        inst_beq;
wire        inst_bne;
wire        inst_lu12i_w;

wire        need_ui5;
wire        need_si12;
wire        need_si16;
wire        need_si20;
wire        need_si26;
wire        src2_is_4;

wire [ 4:0] rf_raddr1;
wire [31:0] rf_rdata1;
wire [ 4:0] rf_raddr2;
wire [31:0] rf_rdata2;

wire        rs_eq_rt;

assign br_bus       = {br_taken,br_target};

assign ds_to_es_bus = {alu_op      ,  //149:138
                       load_op     ,  //137:137
                       src1_is_pc  ,  //136:136
                       src2_is_imm ,  //135:135
                       gr_we       ,  //134:134
                       mem_we      ,  //133:133
                       dest        ,  //132:128
                       imm         ,  //127:96
                       rj_value    ,  //95 :64
                       rkd_value   ,  //63 :32
                       ds_pc          //31 :0
                      };

assign ds_ready_go    = ds_valid;
//lab4
// assign ds_ready_go    = ds_valid & ~rs_wait & ~rt_wait;
//lab5
// assign ds_ready_go    = ds_valid  & ~load_stall;
assign ds_allowin     = !ds_valid || ds_ready_go && es_allowin;
assign ds_to_es_valid = ds_valid && ds_ready_go;

always @(posedge clk ) begin
    if (reset) begin
        ds_valid <= 1'b0;
    end
    else if (ds_allowin) begin
        ds_valid <= fs_to_ds_valid;
    end
end
always @(posedge clk) begin
    if (fs_to_ds_valid && ds_allowin) begin
        fs_to_ds_bus_r <= fs_to_ds_bus;
    end
end

assign op_31_26  = ds_inst[31:26];
assign op_25_22  = ds_inst[25:22];
assign op_21_20  = ds_inst[21:20];
assign op_19_15  = ds_inst[19:15];

assign rd   = ds_inst[ 4: 0];
assign rj   = ds_inst[ 9: 5];
assign rk   = ds_inst[14:10];

assign i12  = ds_inst[21:10];
assign i20  = ds_inst[24: 5];
assign i16  = ds_inst[25:10];
assign i26  = {ds_inst[ 9: 0], ds_inst[25:10]};

decoder_6_64 u_dec0(.in(op_31_26 ), .out(op_31_26_d ));
decoder_4_16 u_dec1(.in(op_25_22 ), .out(op_25_22_d ));
decoder_2_4  u_dec2(.in(op_21_20 ), .out(op_21_20_d ));
decoder_5_32 u_dec3(.in(op_19_15 ), .out(op_19_15_d ));

assign inst_add_w  = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h00];
assign inst_sub_w  = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h02];
assign inst_slt    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h04];
assign inst_sltu   = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h05];
assign inst_nor    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h08];
assign inst_and    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h09];
assign inst_or     = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h0a];
assign inst_xor    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h0b];
assign inst_slli_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h01];
assign inst_srli_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h09];
assign inst_srai_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h11];
assign inst_addi_w = op_31_26_d[6'h00] & op_25_22_d[4'ha];
assign inst_ld_w   = op_31_26_d[6'h0a] & op_25_22_d[4'h2];
assign inst_st_w   = op_31_26_d[6'h0a] & op_25_22_d[4'h6];
assign inst_jirl   = op_31_26_d[6'h13];
assign inst_b      = op_31_26_d[6'h14];
assign inst_bl     = op_31_26_d[6'h15];
assign inst_beq    = op_31_26_d[6'h16];
assign inst_bne    = op_31_26_d[6'h17];
assign inst_lu12i_w= op_31_26_d[6'h05] & ~ds_inst[25];

assign alu_op[ 0] = inst_add_w | inst_addi_w | inst_ld_w | inst_st_w
                    | inst_jirl | inst_bl;
assign alu_op[ 1] = inst_sub_w;
assign alu_op[ 2] = inst_slt;
assign alu_op[ 3] = inst_sltu;
assign alu_op[ 4] = inst_and;
assign alu_op[ 5] = inst_nor;
assign alu_op[ 6] = inst_or;
assign alu_op[ 7] = inst_xor;
assign alu_op[ 8] = inst_slli_w;
assign alu_op[ 9] = inst_srli_w;
assign alu_op[10] = inst_srai_w;
assign alu_op[11] = inst_lu12i_w;

assign need_ui5   =  inst_slli_w | inst_srli_w | inst_srai_w;
assign need_si12  =  inst_addi_w | inst_ld_w | inst_st_w;
assign need_si16  =  inst_jirl | inst_beq | inst_bne;
assign need_si20  =  inst_lu12i_w;
assign need_si26  =  inst_b | inst_bl;
assign src2_is_4  =  inst_jirl | inst_bl;//看看是不是要加4.

assign imm = src2_is_4 ? 32'h4                      :
             need_si20 ? {i20[19:0], 12'b0}         :
/*need_ui5 || need_si12*/{{20{i12[11]}}, i12[11:0]} ;

assign br_offs = need_si26 ? {{ 4{i26[25]}}, i26[25:0], 2'b0} :
                             {{14{i16[15]}}, i16[15:0], 2'b0} ;
assign jirl_offs = {{14{i16[15]}}, i16[15:0], 2'b0};

assign load_op      = inst_ld_w;
assign src_reg_is_rd = inst_beq | inst_bne | inst_st_w ;

assign src1_is_pc    = inst_jirl | inst_bl;

assign src2_is_imm   = inst_slli_w |
                       inst_srli_w |
                       inst_srai_w |
                       inst_addi_w |
                       inst_ld_w   |
                       inst_st_w   |
                       inst_lu12i_w|
                       inst_jirl   |
                       inst_bl     ;


assign res_from_mem  = inst_ld_w;
assign dst_is_r1     = inst_bl;
//  是否需要写入通用寄存器
assign gr_we         = ~inst_st_w & ~inst_beq & ~inst_bne & ~inst_b;

assign mem_we        = inst_st_w;
//这里需要更改
assign dest          = dst_is_r1 ? 5'd01 : rd;
//阻塞
// assign dest         = dst_is_r31   ? 5'd31 :
//                       dst_is_rt    ? rt    : 
//                       inst_no_dest ? 5'd0  :  rd;

assign rf_raddr1 = rj;
assign rf_raddr2 = src_reg_is_rd ? rd :rk;
regfile u_regfile(
    .clk    (clk      ),
    .raddr1 (rf_raddr1),
    .rdata1 (rf_rdata1),
    .raddr2 (rf_raddr2),
    .rdata2 (rf_rdata2),
    .we     (rf_we    ),
    .waddr  (rf_waddr ),
    .wdata  (rf_wdata )
    );

assign rj_value  = rf_rdata1;
assign rkd_value = rf_rdata2;
//lab5
// assign rs_value = rs_wait ? (rs == EXE_dest? EXE_result:
//                             rs == MEM_dest?MEM_result:WB_result)
//                             : rf_rdata1;
// assign rt_value = rt_wait ? (rt == EXE_dest? EXE_result:
//                             rt == MEM_dest?MEM_result:WB_result)
//                             : rf_rdata2;

assign rj_eq_rd = (rj_value == rkd_value);
assign br_taken = (   inst_beq  &&  rj_eq_rd
                   || inst_bne  && !rj_eq_rd
                   || inst_jirl
                   || inst_bl
                   || inst_b
                ) && ds_valid;
assign br_target = (inst_beq || inst_bne || inst_bl || inst_b) ? (ds_pc + br_offs) :
                                                   /*inst_jirl*/ (rj_value + jirl_offs);
//lab4
// wire        src1_no_rs;//指令rs域非0,且不是从寄存器堆读rs
// wire        src2_no_rt;//指令rt域非0,且不是从寄存器堆读rt
// assign src1_no_rs   = 1'b0;
// assign src2_no_rt   = inst_addiu | load_op|inst_jal|inst_lui;

// wire        rs_wait,rt_wait;
// assign rs_wait      = ~src1_no_rs & (rs!=5'd0)
//                         & ( (rs==EXE_dest) | (rs==MEM_dest) | (rs==WB_dest));

// assign rt_wait      = ~src2_no_rt & (rt!=5'd0)
//                         & ( (rt==EXE_dest) | (rt==MEM_dest) | (rt==WB_dest));


// assign br_stall = br_taken & load_stall & {5{ds_valid}};  //增加        
// assign load_stall = (rs_wait & (rs == EXE_dest) & es_load_op ) ||
//                 (rt_wait & (rt == EXE_dest) & es_load_op );  


// wire        inst_no_dest;
// assign inst_no_dest = inst_beq|inst_bne|inst_jr|inst_sw;

endmodule
2. IF_stage.v
c 复制代码
`include "mycpu.h"

module if_stage(
    input                          clk            ,
    input                          reset          ,
    //allwoin
    input                          ds_allowin     ,
    //brbus
    input  [`BR_BUS_WD       -1:0] br_bus         ,
    //to ds
    output                         fs_to_ds_valid ,
    output [`FS_TO_DS_BUS_WD -1:0] fs_to_ds_bus   ,
    // inst sram interface
    output        inst_sram_en   ,
    output [ 3:0] inst_sram_we  ,
    output [31:0] inst_sram_addr ,
    output [31:0] inst_sram_wdata,
    input  [31:0] inst_sram_rdata
);

reg         fs_valid;//表示当前阶段是否有效
wire        fs_ready_go;
wire        fs_allowin; //并确定 IF 阶段是否接受取指令的请求
wire        to_fs_valid;//表示是否可以将指令传递到下一个阶段

// wire         pre_fs_ready_go;  //增加
// wire         br_stall;        //增加
// assign to_fs_valid      = ~reset && pre_fs_ready_go;//修改
// assign pre_fs_ready_go  = ~br_stall;  //增加


wire [31:0] seq_pc;
wire [31:0] nextpc;

wire        br_taken;
wire [31:0] br_target;
assign {br_taken,br_target} = br_bus;
// assign {br_stall,br_taken,br_target} = br_bus; //修改     分支预测
// assign inst_sram_en = to_fs_valid && fs_allowin && ~br_stall; //修改
wire [31:0] fs_inst;
reg  [31:0] fs_pc;
assign fs_to_ds_bus = {fs_inst ,
                       fs_pc   };

// pre-IF stage
assign to_fs_valid  = ~reset;
assign seq_pc       = fs_pc + 3'h4;
assign nextpc       = br_taken ? br_target : seq_pc; 

// IF stage
assign fs_ready_go    = 1'b1;
assign fs_allowin     = !fs_valid || (fs_ready_go && ds_allowin);
assign fs_to_ds_valid =  fs_valid && fs_ready_go;

always @(posedge clk) begin
    if (reset) begin
        fs_valid <= 1'b0;
    end
    else if (fs_allowin) begin
        fs_valid <= to_fs_valid;
    end

    if (reset) begin
        fs_pc <= 32'h1bfffffc;  //trick: to make nextpc be 0x1c000000 during reset 
    end
    else if (to_fs_valid && fs_allowin) begin
        fs_pc <= nextpc;
    end
end

assign inst_sram_en    = to_fs_valid && fs_allowin;
assign inst_sram_we   = 4'h0;
assign inst_sram_addr  = nextpc;
assign inst_sram_wdata = 32'b0;

assign fs_inst         = inst_sram_rdata;

endmodule
3. ID_stage
c 复制代码
`include "mycpu.h"

module id_stage(
    input                          clk           ,
    input                          reset         ,
    //allowin
    input                          es_allowin    ,
    output                         ds_allowin    ,
    //from fs
    input                          fs_to_ds_valid,
    input  [`FS_TO_DS_BUS_WD -1:0] fs_to_ds_bus  ,
    //to es
    output                         ds_to_es_valid,
    output [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus  ,
    //to fs
    output [`BR_BUS_WD       -1:0] br_bus        ,
    //to rf: for write back
    input  [`WS_TO_RF_BUS_WD -1:0] ws_to_rf_bus  

    //
    // output [ 4                 :0] WB_dest,EXE_dest,MEM_dest,

    // input                          es_load_op    ,
    // input  [31                 :0] EXE_result,MEM_result,WB_result
);
// wire         br_stall;        //增加
// wire         load_stall;
wire         br_taken;
reg          ds_valid   ;
wire [31:0]  br_target;



// assign br_bus       = {br_stall,br_taken,br_target};  //修改

wire        ds_ready_go;

wire [31                 :0] fs_pc;
reg  [`FS_TO_DS_BUS_WD -1:0] fs_to_ds_bus_r;
assign fs_pc = fs_to_ds_bus[31:0];

wire [31:0] ds_inst;
wire [31:0] ds_pc  ;
assign {ds_inst,
        ds_pc  } = fs_to_ds_bus_r;

wire        rf_we   ;
wire [ 4:0] rf_waddr;
wire [31:0] rf_wdata;
assign {rf_we   ,  //37:37
        rf_waddr,  //36:32
        rf_wdata   //31:0
       } = ws_to_rf_bus;



wire [11:0] alu_op;
wire        load_op;
wire        src1_is_pc;
wire        src2_is_imm;
wire        res_from_mem;
wire        gr_we;
wire        mem_we;
wire        src_reg_is_rd;
wire [ 4:0] dest;
wire [31:0] imm;
// wire [31:0] rs_value;
// wire [31:0] rt_value;
wire [31:0] rj_value,rkd_value;
wire [31:0] br_offs,jirl_offs;


wire [ 5:0] op_31_26;
wire [ 3:0] op_25_22;
wire [ 1:0] op_21_20;
wire [ 4:0] op_19_15;
wire [ 4:0] rd;
wire [ 4:0] rj;
wire [ 4:0] rk;
wire [11:0] i12;
wire [19:0] i20;
wire [15:0] i16;
wire [25:0] i26;

wire [63:0] op_31_26_d;
wire [15:0] op_25_22_d;
wire [ 3:0] op_21_20_d;
wire [31:0] op_19_15_d;

wire        inst_add_w;
wire        inst_sub_w;
wire        inst_slt;
wire        inst_sltu;
wire        inst_nor;
wire        inst_and;
wire        inst_or;
wire        inst_xor;
wire        inst_slli_w;
wire        inst_srli_w;
wire        inst_srai_w;
wire        inst_addi_w;
wire        inst_ld_w;
wire        inst_st_w;
wire        inst_jirl;
wire        inst_b;
wire        inst_bl;
wire        inst_beq;
wire        inst_bne;
wire        inst_lu12i_w;

wire        need_ui5;
wire        need_si12;
wire        need_si16;
wire        need_si20;
wire        need_si26;
wire        src2_is_4;

wire [ 4:0] rf_raddr1;
wire [31:0] rf_rdata1;
wire [ 4:0] rf_raddr2;
wire [31:0] rf_rdata2;

wire        rs_eq_rt;

assign br_bus       = {br_taken,br_target};

assign ds_to_es_bus = {alu_op      ,  //149:138
                       load_op     ,  //137:137
                       src1_is_pc  ,  //136:136
                       src2_is_imm ,  //135:135
                       gr_we       ,  //134:134
                       mem_we      ,  //133:133
                       dest        ,  //132:128
                       imm         ,  //127:96
                       rj_value    ,  //95 :64
                       rkd_value   ,  //63 :32
                       ds_pc          //31 :0
                      };

assign ds_ready_go    = ds_valid;
//lab4
// assign ds_ready_go    = ds_valid & ~rs_wait & ~rt_wait;
//lab5
// assign ds_ready_go    = ds_valid  & ~load_stall;
assign ds_allowin     = !ds_valid || ds_ready_go && es_allowin;
assign ds_to_es_valid = ds_valid && ds_ready_go;

always @(posedge clk ) begin
    if (reset) begin
        ds_valid <= 1'b0;
    end
    else if (ds_allowin) begin
        ds_valid <= fs_to_ds_valid;
    end
end
always @(posedge clk) begin
    if (fs_to_ds_valid && ds_allowin) begin
        fs_to_ds_bus_r <= fs_to_ds_bus;
    end
end

assign op_31_26  = ds_inst[31:26];
assign op_25_22  = ds_inst[25:22];
assign op_21_20  = ds_inst[21:20];
assign op_19_15  = ds_inst[19:15];

assign rd   = ds_inst[ 4: 0];
assign rj   = ds_inst[ 9: 5];
assign rk   = ds_inst[14:10];

assign i12  = ds_inst[21:10];
assign i20  = ds_inst[24: 5];
assign i16  = ds_inst[25:10];
assign i26  = {ds_inst[ 9: 0], ds_inst[25:10]};

decoder_6_64 u_dec0(.in(op_31_26 ), .out(op_31_26_d ));
decoder_4_16 u_dec1(.in(op_25_22 ), .out(op_25_22_d ));
decoder_2_4  u_dec2(.in(op_21_20 ), .out(op_21_20_d ));
decoder_5_32 u_dec3(.in(op_19_15 ), .out(op_19_15_d ));

assign inst_add_w  = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h00];
assign inst_sub_w  = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h02];
assign inst_slt    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h04];
assign inst_sltu   = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h05];
assign inst_nor    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h08];
assign inst_and    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h09];
assign inst_or     = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h0a];
assign inst_xor    = op_31_26_d[6'h00] & op_25_22_d[4'h0] & op_21_20_d[2'h1] & op_19_15_d[5'h0b];
assign inst_slli_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h01];
assign inst_srli_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h09];
assign inst_srai_w = op_31_26_d[6'h00] & op_25_22_d[4'h1] & op_21_20_d[2'h0] & op_19_15_d[5'h11];
assign inst_addi_w = op_31_26_d[6'h00] & op_25_22_d[4'ha];
assign inst_ld_w   = op_31_26_d[6'h0a] & op_25_22_d[4'h2];
assign inst_st_w   = op_31_26_d[6'h0a] & op_25_22_d[4'h6];
assign inst_jirl   = op_31_26_d[6'h13];
assign inst_b      = op_31_26_d[6'h14];
assign inst_bl     = op_31_26_d[6'h15];
assign inst_beq    = op_31_26_d[6'h16];
assign inst_bne    = op_31_26_d[6'h17];
assign inst_lu12i_w= op_31_26_d[6'h05] & ~ds_inst[25];

assign alu_op[ 0] = inst_add_w | inst_addi_w | inst_ld_w | inst_st_w
                    | inst_jirl | inst_bl;
assign alu_op[ 1] = inst_sub_w;
assign alu_op[ 2] = inst_slt;
assign alu_op[ 3] = inst_sltu;
assign alu_op[ 4] = inst_and;
assign alu_op[ 5] = inst_nor;
assign alu_op[ 6] = inst_or;
assign alu_op[ 7] = inst_xor;
assign alu_op[ 8] = inst_slli_w;
assign alu_op[ 9] = inst_srli_w;
assign alu_op[10] = inst_srai_w;
assign alu_op[11] = inst_lu12i_w;

assign need_ui5   =  inst_slli_w | inst_srli_w | inst_srai_w;
assign need_si12  =  inst_addi_w | inst_ld_w | inst_st_w;
assign need_si16  =  inst_jirl | inst_beq | inst_bne;
assign need_si20  =  inst_lu12i_w;
assign need_si26  =  inst_b | inst_bl;
assign src2_is_4  =  inst_jirl | inst_bl;//看看是不是要加4.

assign imm = src2_is_4 ? 32'h4                      :
             need_si20 ? {i20[19:0], 12'b0}         :
/*need_ui5 || need_si12*/{{20{i12[11]}}, i12[11:0]} ;

assign br_offs = need_si26 ? {{ 4{i26[25]}}, i26[25:0], 2'b0} :
                             {{14{i16[15]}}, i16[15:0], 2'b0} ;
assign jirl_offs = {{14{i16[15]}}, i16[15:0], 2'b0};

assign load_op      = inst_ld_w;
assign src_reg_is_rd = inst_beq | inst_bne | inst_st_w ;

assign src1_is_pc    = inst_jirl | inst_bl;

assign src2_is_imm   = inst_slli_w |
                       inst_srli_w |
                       inst_srai_w |
                       inst_addi_w |
                       inst_ld_w   |
                       inst_st_w   |
                       inst_lu12i_w|
                       inst_jirl   |
                       inst_bl     ;


assign res_from_mem  = inst_ld_w;
assign dst_is_r1     = inst_bl;
//  是否需要写入通用寄存器
assign gr_we         = ~inst_st_w & ~inst_beq & ~inst_bne & ~inst_b;

assign mem_we        = inst_st_w;
//这里需要更改
assign dest          = dst_is_r1 ? 5'd01 : rd;
//阻塞
// assign dest         = dst_is_r31   ? 5'd31 :
//                       dst_is_rt    ? rt    : 
//                       inst_no_dest ? 5'd0  :  rd;

assign rf_raddr1 = rj;
assign rf_raddr2 = src_reg_is_rd ? rd :rk;
regfile u_regfile(
    .clk    (clk      ),
    .raddr1 (rf_raddr1),
    .rdata1 (rf_rdata1),
    .raddr2 (rf_raddr2),
    .rdata2 (rf_rdata2),
    .we     (rf_we    ),
    .waddr  (rf_waddr ),
    .wdata  (rf_wdata )
    );

assign rj_value  = rf_rdata1;
assign rkd_value = rf_rdata2;
//lab5
// assign rs_value = rs_wait ? (rs == EXE_dest? EXE_result:
//                             rs == MEM_dest?MEM_result:WB_result)
//                             : rf_rdata1;
// assign rt_value = rt_wait ? (rt == EXE_dest? EXE_result:
//                             rt == MEM_dest?MEM_result:WB_result)
//                             : rf_rdata2;

assign rj_eq_rd = (rj_value == rkd_value);
assign br_taken = (   inst_beq  &&  rj_eq_rd
                   || inst_bne  && !rj_eq_rd
                   || inst_jirl
                   || inst_bl
                   || inst_b
                ) && ds_valid;
assign br_target = (inst_beq || inst_bne || inst_bl || inst_b) ? (ds_pc + br_offs) :
                                                   /*inst_jirl*/ (rj_value + jirl_offs);
//lab4
// wire        src1_no_rs;//指令rs域非0,且不是从寄存器堆读rs
// wire        src2_no_rt;//指令rt域非0,且不是从寄存器堆读rt
// assign src1_no_rs   = 1'b0;
// assign src2_no_rt   = inst_addiu | load_op|inst_jal|inst_lui;

// wire        rs_wait,rt_wait;
// assign rs_wait      = ~src1_no_rs & (rs!=5'd0)
//                         & ( (rs==EXE_dest) | (rs==MEM_dest) | (rs==WB_dest));

// assign rt_wait      = ~src2_no_rt & (rt!=5'd0)
//                         & ( (rt==EXE_dest) | (rt==MEM_dest) | (rt==WB_dest));


// assign br_stall = br_taken & load_stall & {5{ds_valid}};  //增加        
// assign load_stall = (rs_wait & (rs == EXE_dest) & es_load_op ) ||
//                 (rt_wait & (rt == EXE_dest) & es_load_op );  


// wire        inst_no_dest;
// assign inst_no_dest = inst_beq|inst_bne|inst_jr|inst_sw;

endmodule
4. EXE_stage
c 复制代码
`include "mycpu.h"

module exe_stage(
    input                          clk           ,
    input                          reset         ,
    //allowin
    input                          ms_allowin    ,
    output                         es_allowin    ,
    //from ds
    input                          ds_to_es_valid,
    input  [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus  ,
    //to ms
    output                         es_to_ms_valid,
    output [`ES_TO_MS_BUS_WD -1:0] es_to_ms_bus  ,
    // data sram interface
    output        data_sram_en   ,
    output [ 3:0] data_sram_we  ,
    output [31:0] data_sram_addr ,
    output [31:0] data_sram_wdata 
    // output [ 4:0] EXE_dest       ,

    // output        es_load_op     
    // output [31:0] EXE_result
);

reg         es_valid      ;
wire        es_ready_go   ;

reg  [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus_r;
wire [11:0] es_alu_op     ;
wire        es_load_op    ;
// wire        es_src1_is_sa ;  
wire        es_src1_is_pc ;
wire        es_src2_is_imm; 
// wire        es_src2_is_8  ;
wire        es_gr_we      ;
wire        es_mem_we     ;
wire [ 4:0] es_dest       ;
wire [31:0] es_imm        ;
wire [31:0] es_rj_value   ;
wire [31:0] es_rkd_value   ;
wire [31:0] es_pc         ;
assign {es_alu_op      ,  //149:138
        es_load_op     ,  //137:137
        es_src1_is_pc  ,  //136:136
        es_src2_is_imm ,  //135:135
        es_gr_we       ,  //134:134
        es_mem_we      ,  //133:133
        es_dest        ,  //132:128
        es_imm         ,  //127:96
        es_rj_value    ,  //95 :64
        es_rkd_value   ,  //63 :32
        es_pc          //31 :0
       } = ds_to_es_bus_r;

wire [31:0] es_alu_src1   ;
wire [31:0] es_alu_src2   ;
wire [31:0] es_alu_result ;

wire        es_res_from_mem;

assign es_res_from_mem = es_load_op;
assign es_to_ms_bus = {es_res_from_mem,  //70:70
                       es_gr_we       ,  //69:69
                       es_dest        ,  //68:64
                       es_alu_result  ,  //63:32
                       es_pc             //31:0
                      };

assign es_ready_go    = 1'b1;
assign es_allowin     = !es_valid || es_ready_go && ms_allowin;
assign es_to_ms_valid =  es_valid && es_ready_go;
always @(posedge clk) begin
    if (reset) begin
        es_valid <= 1'b0;
    end
    else if (es_allowin) begin
        es_valid <= ds_to_es_valid;
    end

    if (ds_to_es_valid && es_allowin) begin
        ds_to_es_bus_r <= ds_to_es_bus;
    end
end

// assign es_alu_src1 = es_src1_is_sa  ? {27'b0, es_imm[10:6]} : 
//                      es_src1_is_pc  ? es_pc[31:0] :
//                                       es_rs_value;
// assign es_alu_src2 = es_src2_is_imm ? {{16{es_imm[15]}}, es_imm[15:0]} : 
//                      es_src2_is_8   ? 32'd8 :
//                                       es_rt_value;
assign es_alu_src1 = es_src1_is_pc  ? es_pc[31:0] : es_rj_value;
assign es_alu_src2 = es_src2_is_imm ? es_imm : es_rkd_value;

alu u_alu(
    .alu_op     (es_alu_op    ),
    .alu_src1   (es_alu_src1  ),
    .alu_src2   (es_alu_src2  ),
    .alu_result (es_alu_result)
    );

assign data_sram_en    = 1'b1;
assign data_sram_we   = es_mem_we&&es_valid ? 4'hf : 4'h0;
assign data_sram_addr  = es_alu_result;
// assign data_sram_wdata = es_rt_value;可能需要改
assign data_sram_wdata = es_rkd_value;

// assign EXE_dest = es_dest & {5{es_valid}}; 
// assign EXE_result = es_alu_result;
endmodule
5. MEM_stage
c 复制代码
`include "mycpu.h"

module exe_stage(
    input                          clk           ,
    input                          reset         ,
    //allowin
    input                          ms_allowin    ,
    output                         es_allowin    ,
    //from ds
    input                          ds_to_es_valid,
    input  [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus  ,
    //to ms
    output                         es_to_ms_valid,
    output [`ES_TO_MS_BUS_WD -1:0] es_to_ms_bus  ,
    // data sram interface
    output        data_sram_en   ,
    output [ 3:0] data_sram_we  ,
    output [31:0] data_sram_addr ,
    output [31:0] data_sram_wdata 
    // output [ 4:0] EXE_dest       ,

    // output        es_load_op     
    // output [31:0] EXE_result
);

reg         es_valid      ;
wire        es_ready_go   ;

reg  [`DS_TO_ES_BUS_WD -1:0] ds_to_es_bus_r;
wire [11:0] es_alu_op     ;
wire        es_load_op    ;
// wire        es_src1_is_sa ;  
wire        es_src1_is_pc ;
wire        es_src2_is_imm; 
// wire        es_src2_is_8  ;
wire        es_gr_we      ;
wire        es_mem_we     ;
wire [ 4:0] es_dest       ;
wire [31:0] es_imm        ;
wire [31:0] es_rj_value   ;
wire [31:0] es_rkd_value   ;
wire [31:0] es_pc         ;
assign {es_alu_op      ,  //149:138
        es_load_op     ,  //137:137
        es_src1_is_pc  ,  //136:136
        es_src2_is_imm ,  //135:135
        es_gr_we       ,  //134:134
        es_mem_we      ,  //133:133
        es_dest        ,  //132:128
        es_imm         ,  //127:96
        es_rj_value    ,  //95 :64
        es_rkd_value   ,  //63 :32
        es_pc          //31 :0
       } = ds_to_es_bus_r;

wire [31:0] es_alu_src1   ;
wire [31:0] es_alu_src2   ;
wire [31:0] es_alu_result ;

wire        es_res_from_mem;

assign es_res_from_mem = es_load_op;
assign es_to_ms_bus = {es_res_from_mem,  //70:70
                       es_gr_we       ,  //69:69
                       es_dest        ,  //68:64
                       es_alu_result  ,  //63:32
                       es_pc             //31:0
                      };

assign es_ready_go    = 1'b1;
assign es_allowin     = !es_valid || es_ready_go && ms_allowin;
assign es_to_ms_valid =  es_valid && es_ready_go;
always @(posedge clk) begin
    if (reset) begin
        es_valid <= 1'b0;
    end
    else if (es_allowin) begin
        es_valid <= ds_to_es_valid;
    end

    if (ds_to_es_valid && es_allowin) begin
        ds_to_es_bus_r <= ds_to_es_bus;
    end
end

// assign es_alu_src1 = es_src1_is_sa  ? {27'b0, es_imm[10:6]} : 
//                      es_src1_is_pc  ? es_pc[31:0] :
//                                       es_rs_value;
// assign es_alu_src2 = es_src2_is_imm ? {{16{es_imm[15]}}, es_imm[15:0]} : 
//                      es_src2_is_8   ? 32'd8 :
//                                       es_rt_value;
assign es_alu_src1 = es_src1_is_pc  ? es_pc[31:0] : es_rj_value;
assign es_alu_src2 = es_src2_is_imm ? es_imm : es_rkd_value;

alu u_alu(
    .alu_op     (es_alu_op    ),
    .alu_src1   (es_alu_src1  ),
    .alu_src2   (es_alu_src2  ),
    .alu_result (es_alu_result)
    );

assign data_sram_en    = 1'b1;
assign data_sram_we   = es_mem_we&&es_valid ? 4'hf : 4'h0;
assign data_sram_addr  = es_alu_result;
// assign data_sram_wdata = es_rt_value;可能需要改
assign data_sram_wdata = es_rkd_value;

// assign EXE_dest = es_dest & {5{es_valid}}; 
// assign EXE_result = es_alu_result;
endmodule
6. WB_stage
c 复制代码
`include "mycpu.h"

module wb_stage(
    input                           clk           ,
    input                           reset         ,
    //allowin
    output                          ws_allowin    ,
    //from ms
    input                           ms_to_ws_valid,
    input  [`MS_TO_WS_BUS_WD -1:0]  ms_to_ws_bus  ,
    //to rf: for write back
    output [`WS_TO_RF_BUS_WD -1:0]  ws_to_rf_bus  ,
    //trace debug interface
    output [31:0] debug_wb_pc     ,
    output [ 3:0] debug_wb_rf_we ,
    output [ 4:0] debug_wb_rf_wnum,
    output [31:0] debug_wb_rf_wdata 
    // lab4
    // output [ 4:0] WB_dest         ,
    //lab5
    // output [31:0] WB_result
);
reg         ws_valid;
wire        ws_ready_go;

reg [`MS_TO_WS_BUS_WD -1:0] ms_to_ws_bus_r;
wire        ws_gr_we;
wire [ 4:0] ws_dest;
wire [31:0] ws_final_result;
wire [31:0] ws_pc;
assign {ws_gr_we       ,  //69:69
        ws_dest        ,  //68:64
        ws_final_result,  //63:32
        ws_pc             //31:0
       } = ms_to_ws_bus_r;

wire        rf_we;
wire [4 :0] rf_waddr;
wire [31:0] rf_wdata;
assign ws_to_rf_bus = {rf_we   ,  //37:37
                       rf_waddr,  //36:32
                       rf_wdata   //31:0
                      };

assign ws_ready_go = 1'b1;
assign ws_allowin  = !ws_valid || ws_ready_go;
always @(posedge clk) begin
    if (reset) begin
        ws_valid <= 1'b0;
    end
    else if (ws_allowin) begin
        ws_valid <= ms_to_ws_valid;
    end

    if (ms_to_ws_valid && ws_allowin) begin
        ms_to_ws_bus_r <= ms_to_ws_bus;
    end
end

assign rf_we    = ws_gr_we&&ws_valid;
assign rf_waddr = ws_dest;
assign rf_wdata = ws_final_result;

// debug info generate
assign debug_wb_pc       = ws_pc;
assign debug_wb_rf_we   = {4{rf_we}};
assign debug_wb_rf_wnum  = ws_dest;
assign debug_wb_rf_wdata = ws_final_result;

// assign WB_dest = ws_dest & {5{ws_valid}};
// assign WB_result = ws_final_result;
endmodule
相关推荐
fei_sun15 小时前
【Verilog】第一章作业
fpga开发·verilog
深圳市雷龙发展有限公司longsto16 小时前
基于FPGA(现场可编程门阵列)的SD NAND图片显示系统是一个复杂的项目,它涉及硬件设计、FPGA编程、SD卡接口、NAND闪存控制以及图像显示等多个方面
fpga开发
9527华安20 小时前
FPGA实现PCIE3.0视频采集转10G万兆UDP网络输出,基于XDMA+GTH架构,提供工程源码和技术支持
网络·fpga开发·udp·音视频·xdma·pcie3.0·万兆网
able陈21 小时前
为什么verilog中递归函数需要定义为automatic?
fpga开发
fei_sun21 小时前
【Verilog】第二章作业
fpga开发·verilog
碎碎思1 天前
如何使用 Vivado 从源码构建 Infinite-ISP FPGA 项目
fpga开发·接口隔离原则
江山如画,佳人北望1 天前
fpga-状态机的设计及应用
fpga开发
晓晓暮雨潇潇1 天前
Xilinx IP核(3)XADC IP核
fpga开发·vivado·xadc·ip核
CWNULT1 天前
AMD(Xilinx) FPGA配置Flash大小选择
fpga开发
碎碎思2 天前
很能体现FPGA硬件思维的一道面试题
fpga开发