基于PowerWord的储能在主动配电网中的仿真研究

摘要

主动配电网是智能配电网技术发展的高级阶段,分布式储能是主动配电网的重要组成部分,分布式储能的应用对主动配电网的规划、运行、网络拓扑、故障处理和保护、可再生能源电源的协调优化等方面带来不容忽视的影响,针对这一现状,本文提出了储能在主动配电网中的仿真研究,并以此为基础对研究了基于PowerWord的储能在主动配电网中的仿真研究方法。

由于储能电池成本高、使用寿命相对较短,因此需要研究了目前储能技术的发展及数学模型。对不同储能技术运行特性进行梳理总结的基础上明确了储能对于主动配电网的关键作用,重点从控制策略与规划配置两个方面对储能在配电网中的研究现状进行了评述并指出了后续研究应进一步关注的问题;本文还探讨了储能的数学模型和经济性分析模型,重点分析了将储能应用于主动配电网中的可行性。

关键词:主动配电网;PowerWord;储能系统;仿真

Abstract

Active power distribution network is the advanced stage of intelligent distribution network technology development, distributed energy storage is an important component of the active power distribution network, the application of the distributed energy storage on the active power distribution network planning, operation, network topology, fault handling, and protection, renewable energy power coordinated optimization of nots allow to ignore effects, aimed at the status quo, In this paper, the simulation research of energy storage in active distribution network is proposed, and based on this, the simulation research method of energy storage in active distribution network based on PowerWord is studied.

Due to the high cost and relatively short service life of energy storage batteries, it is necessary to study the development and mathematical model of current energy storage technology. On the basis of summarizing the operation characteristics of different energy storage technologies, the key role of energy storage in active distribution network is clarified, and the research status of energy storage in distribution network is reviewed from two aspects of control strategy and planning and configuration, and the problems that should be paid more attention to in future research are pointed out. This paper also discusses the mathematical model and economic analysis model of energy storage, focusing on the feasibility of using energy storage in active distribution network.

Keywords: Active distribution network; PowerWord. Energy storage system; The simulation

目录

[摘要....................................................................................... I](#摘要....................................................................................... I)

[Abstract.............................................................................. II](#Abstract.............................................................................. II)

[第一章 绪论........................................................................ 1](#第一章 绪论........................................................................ 1)

[1.1研究课题背景.......................................................... 1](#1.1研究课题背景.......................................................... 1)

[1.2课题研究现状.......................................................... 2](#1.2课题研究现状.......................................................... 2)

[1.2.1主动配电网现状与趋势................................. 2](#1.2.1主动配电网现状与趋势................................. 2)

[1.2.2电力储能技术研究现状................................. 3](#1.2.2电力储能技术研究现状................................. 3)

[1.3课题研究的意义...................................................... 3](#1.3课题研究的意义...................................................... 3)

[1.4本文的主要研究内容.............................................. 4](#1.4本文的主要研究内容.............................................. 4)

[第二章 储能系统及建模.................................................... 6](#第二章 储能系统及建模.................................................... 6)

[2.1储能技术的分类...................................................... 6](#2.1储能技术的分类...................................................... 6)

[2.2储能系统工作原理.................................................. 7](#2.2储能系统工作原理.................................................. 7)

[2.3储能系统建模.......................................................... 8](#2.3储能系统建模.......................................................... 8)

[2.3.1荷电状态模型................................................. 8](#2.3.1荷电状态模型................................................. 8)

[2.3.2储能经济性模型............................................. 9](#2.3.2储能经济性模型............................................. 9)

[第三章 储能系统在主动配电网中的应用...................... 11](#第三章 储能系统在主动配电网中的应用...................... 11)

[3.1主动配电网概述.................................................... 11](#3.1主动配电网概述.................................................... 11)

[3.2储能系统与主动配电网的关系............................ 12](#3.2储能系统与主动配电网的关系............................ 12)

[3.3储能系统在主动配电网中发挥的作用................ 13](#3.3储能系统在主动配电网中发挥的作用................ 13)

[第四章 基于 PowerWord 的储能在主动配电网中的建模仿真............... 15](#第四章 基于PowerWord的储能在主动配电网中的建模仿真............... 15)

[4.1 储能在主动配电网中的建模............................. 15](#4.1 储能在主动配电网中的建模............................. 15)

[4.2 储能在主动配电网中的仿真分析..................... 15](#4.2 储能在主动配电网中的仿真分析..................... 15)

[第五章总结........................................................................ 16](#第五章总结........................................................................ 16)

[参考文献............................................................................ 17](#参考文献............................................................................ 17)

[致 谢............................................................................ 19](#致 谢............................................................................ 19)

完整论文点击如下链接下载:

https://download.csdn.net/download/weixin_45905610/88493720

基于PowerWord的储能在主动配电网中的仿真研究资源-CSDN文库

相关推荐
老花眼猫2 分钟前
C语言绘图方法:(10)椭圆缩放旋转
c语言·经验分享·青少年编程·课程设计
Evand J4 小时前
【MATLAB例程】基于IMM-CKF的AOA+测距融合的二维移动目标跟踪定位
开发语言·matlab·目标跟踪
这个昵称不容易21 小时前
SpringBoot 医疗病历交互系统的设计与实现:192 个 Java 文件、256 个接口、22 张表,附真实运行截图
java·springboot·毕设
机器学习之心1 天前
物理信息神经网络与扩展物理信息神经网络(PINN/XPINN)求解功能梯度材料稳态—瞬态热传导,MATLAB代码
matlab·物理信息神经网络
这个昵称不容易1 天前
SpringBoot 医疗病历交互系统毕设:192 个 Java 文件、256 个接口、22 张表,附真实运行截图
java·springboot·毕设
FYKJ_20102 天前
springboot同人周边订单管理系统48955-计算机毕业设计、课程设计
java·javascript·vue.js·spring boot·django·php·课程设计
yuyuxun13 天前
协同过滤的校园二手物品智能推荐系统的设计与实现 毕业设计-附源码40082
javascript·vue.js·spring boot·python·数据分析·django·课程设计
神仙别闹4 天前
基于 Java GUI 贪心策略直接搜索算法和极大极小博弈树算法的智能人机博弈五子棋游戏
java·毕业设计·gui·贪心策略·极大极小博弈树
BYSJMG4 天前
计算机毕业设计选题推荐:【基于深度学习的车辆损坏严重程度评估方法研究】ResNet50 图像分类
人工智能·深度学习·目标检测·机器学习·计算机视觉·分类·课程设计
Evand J4 天前
【MATLAB例程,PMSM19】永磁同步电机(PMSM)基于多速率无迹卡尔曼滤波(UKF)的转速与转子位置估计。测量缺失、状态预测与恢复性能分析
开发语言·matlab·电机·ekf·卡尔曼·电机滤波