1、前言
在调试过程中，安装了很多依赖库，具体没有记录。关于kvm，也没理清具体有什么作用。本文仅记录，用QEMU成功的将OpenBMC跑起来的过程，做备忘，也供大家参考。
2、环境信息
VMware® Workstation 15 Pro
sunny@ubuntu:~$ uname -a
Linux ubuntu 5.4.0-150-generic #167~18.04.1-Ubuntu SMP Wed May 24 00:51:42 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux3、虚拟化设置
进入虚拟机：
1、查看是否支持虚拟化
sunny@ubuntu:~$ LC_ALL=C lscpu | grep Virtualization
Virtualization: VT-x
Virtualization type: full
2、查看核心数，应该大于0
sunny@ubuntu:~$ egrep -c '(vmx|svm)' /proc/cpuinfo
4
3、安装KVM，已经安装过
sunny@ubuntu:~$ sudo apt install qemu qemu-kvm virt-manager bridge-utils
[sudo] password for sunny:
Reading package lists... Done
Building dependency tree
Reading state information... Done
bridge-utils is already the newest version (1.5-15ubuntu1).
qemu-kvm is already the newest version (1:2.11+dfsg-1ubuntu7.42).
qemu is already the newest version (1:2.11+dfsg-1ubuntu7.42).
virt-manager is already the newest version (1:1.5.1-0ubuntu1.2).
The following packages were automatically installed and are no longer required:
gir1.2-goa-1.0 gir1.2-snapd-1
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3、重启虚拟机
sunny@ubuntu:~$ reboot
4、虚拟机起来后，将用户添加到适当的组中，启用并启动libvirt服务
sunny@ubuntu:~$ sudo useradd -g $USER libvirt
sunny@ubuntu:~$ sudo useradd -g $USER libvirt-kvm
sunny@ubuntu:~$ sudo systemctl enable libvirtd.service
sunny@ubuntu:~$ sudo systemctl start libvirtd.service
Synchronizing state of libvirtd.service with SysV service script with
/lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable libvirtd4、安装QENU
1、下载源码
sunny@ubuntu:~$ wget https://download.qemu.org/qemu-6.2.0.tar.xz
2、解压
sunny@ubuntu:~$ tar xvJf qemu-6.2.0.tar.xz
3、在下载目录新建文件夹build
sunny@ubuntu:~$ cd qemu-6.2.0
sunny@ubuntu:~$ mkdir build
sunny@ubuntu:~$ cd build
4、配置
sunny@ubuntu:~$ ../configure --enable-kvm --target-list=arm-softmmu
5、编译
sunny@ubuntu:~$ make
6、安装
sunny@ubuntu:~$ make install
7、查看是否安装成功
sunny@ubuntu:~$ qemu-system-arm --version
QEMU emulator version 6.2.0
Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers5、启动OpenBMC
启动并登录：（用户名/密码：root/0penBmc ，0penBmc 首字母是零）
./qemu-system-arm -m 256 -M romulus-bmc -nographic \
-drive file=./obmc-phosphor-image-romulus.static.mtd,format=raw,if=mtd \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443,hostfwd=udp:127.0.0.1:2623-:623,hostname=qemu
sunny@ubuntu:~$ qemu-system-arm -m 256 -M romulus-bmc -nographic -drive file=./obmc-phosphor-image-romulus.static.mtd,format=raw,if=mtd -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443,hostfwd=udp:127.0.0.1:2623-:623,hostname=qemu
qemu-system-arm: warning: nic ftgmac100.1 has no peer
U-Boot 2019.04 (Jan 28 2025 - 06:31:57 +0000)
SOC : AST2500-A1
RST : Power On
2nd Boot : Enable
LPC Mode : SIO:Enable : SuperIO-2e
Eth : MAC0: RMII/NCSI, , MAC1: RMII/NCSI,
Model: Romulus BMC
DRAM: 192 MiB (capacity:256 MiB, VGA:64 MiB, ECC:off)
MMC:
Loading Environment from SPI Flash... SF: Detected n25q256a with page size 256 Bytes, erase size 4 KiB, total 32 MiB
*** Warning - bad CRC, using default environment
In: serial@1e784000
Out: serial@1e784000
Err: serial@1e784000
Net: ftgmac100_probe - NCSI detected
Warning: ethernet@1e660000 (eth0) using random MAC address - be:b0:c8:9a:8c:85
eth0: ethernet@1e660000
Hit any key to stop autoboot: 0
...
romulus login: [ OK ] Started Hostname Service.
[ OK ] Finished Phosphor Sysfs - Add LED.
[ OK ] Finished Phosphor Sysfs - Add LED.
[ OK ] Finished Phosphor Sysfs - Add LED.
[ OK ] Finished Wait for /org/openbmc/control/power0.
[ OK ] Finished Wait for /xyz/openbmc_project/control/host0/auto_reboot.
[ OK ] Finished Wait for /xyz/openbmc_project/control/host0/boot/one_time.
[ OK ] Finished Wait for /xyz/openbmc_project/control/host0/boot.
[ OK ] Finished Wait for /xyz/openbmc_pro...control/host0/power_restore_policy.
[ OK ] Finished Wait for /xyz/openbmc_project/control/host0/restriction_mode.
[ OK ] Finished Wait for /xyz/openbmc_project/time/sync_method.
romulus login: root
Password:
root@romulus:~# pwd
/home/root
root@romulus:~# ps
PID USER VSZ STAT COMMAND
1 root 10896 S {systemd} /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [pool_workqueue_]
4 root 0 IW< [kworker/R-slub_]
5 root 0 IW< [kworker/R-netns]
6 root 0 IW [kworker/0:0-dev]
7 root 0 IW< [kworker/0:0H-kb]
8 root 0 IW [kworker/u2:0-ev]
9 root 0 IW< [kworker/R-mm_pe]
10 root 0 IW [rcu_tasks_rude_]
11 root 0 IW [rcu_tasks_trace]
12 root 0 SW [ksoftirqd/0]
13 root 0 SW [kdevtmpfs]
14 root 0 IW< [kworker/R-inet_]
15 root 0 SW [oom_reaper]
16 root 0 IW [kworker/u2:1-ev]
17 root 0 IW< [kworker/R-write]
18 root 0 IW< [kworker/R-kbloc]
19 root 0 SW [watchdogd]
20 root 0 IW [kworker/0:1-dev]
21 root 0 SW [kswapd0]
22 root 0 IW [kworker/0:2-dev]
23 root 0 IW [kworker/0:3-eve]
24 root 0 IW [kworker/0:4-eve]
25 root 0 SW [hwrng]
26 root 0 SW [card0-crtc0]
27 root 0 IW< [kworker/u3:0]
28 root 0 IW [kworker/u2:2-ev]
29 root 0 IW< [kworker/R-nbd0-]
30 root 0 IW< [kworker/R-nbd1-]
31 root 0 IW< [kworker/R-nbd2-]
32 root 0 IW< [kworker/R-nbd3-]
33 root 0 IW< [kworker/R-nbd4-]
34 root 0 IW< [kworker/R-nbd5-]
35 root 0 IW< [kworker/R-nbd6-]
36 root 0 IW< [kworker/R-nbd7-]
37 root 0 IW< [kworker/R-nbd8-]
38 root 0 IW< [kworker/R-nbd9-]
39 root 0 IW< [kworker/R-nbd10]
40 root 0 IW< [kworker/R-nbd11]
41 root 0 IW< [kworker/R-nbd12]
42 root 0 IW< [kworker/R-nbd13]
43 root 0 IW< [kworker/R-nbd14]
44 root 0 IW< [kworker/R-nbd15]
45 root 0 SW [irq/38-aspeed-v]
46 root 0 IW< [kworker/R-mld]
47 root 0 IW< [kworker/R-ipv6_]
89 root 0 SWN [jffs2_gcd_mtd5]
99 root 0 IW< [kworker/0:1H]
120 root 15644 S /usr/lib/systemd/systemd-journald
156 systemd- 7536 S /usr/lib/systemd/systemd-resolved
157 systemd- 16348 S /usr/lib/systemd/systemd-timesyncd
167 root 3844 S /usr/lib/systemd/systemd-udevd
174 systemd- 8800 S /usr/lib/systemd/systemd-networkd
220 messageb 6324 S /usr/bin/dbus-broker-launch --scope system --audit
222 messageb 2884 S dbus-broker --log 4 --controller 9 --machine-id d21f666aea624a3b8a37ba09a2631ee3 --max-bytes 536870912 --max-fds 40
223 avahi 4764 S avahi-daemon: running [romulus.local]
224 root 15296 S /usr/libexec/bmcwebd
225 root 2980 S /usr/sbin/klogd -n
226 root 2980 S /usr/sbin/syslogd -n
231 root 3820 S /usr/sbin/obmc-console-server --config /etc/obmc-console/server.ttyVUART0.conf ttyVUART0
233 root 6016 S phosphor-dump-monitor
235 root 13148 S /usr/bin/openpower-update-manager
236 root 3620 S btbridged
238 root 41696 S power_control.exe 3000 10
239 root 15044 S /usr/sbin/nscd
240 root 13828 S /usr/bin/phosphor-certificate-manager --endpoint truststore --path /etc/ssl/certs/authority --type authority --unit
242 root 14224 S /usr/bin/phosphor-certificate-manager --endpoint https --path /etc/ssl/certs/https/server.pem --type server --unit
245 root 14092 S /usr/bin/phosphor-certificate-manager --endpoint ldap --path /etc/nslcd/certs/cert.pem --type client --unit
248 root 6020 S /usr/bin/phosphor-gpio-monitor --path=/dev/input/by-path/platform-gpio-keys-event --key=135 --polarity=1 --target=i
260 root 18948 S /usr/bin/health-monitor
262 root 9448 S /usr/libexec/phosphor-led-sysfs/phosphor-ledcontroller
263 root 5512 S /usr/sbin/slpd
265 root 6584 S /usr/bin/phosphor-srvcfg-manager6、登录WEB
7、SSH登录
sunny@ubuntu:~$ ssh -p 2222 [email protected]
The authenticity of host '[127.0.0.1]:2222 ([127.0.0.1]:2222)' can't be established.
ECDSA key fingerprint is SHA256:1qMjJ+TbkvpF17Y8y/R9d+xVUE4lu0nN7YxZHNaQwhU.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '[127.0.0.1]:2222' (ECDSA) to the list of known hosts.
[email protected]'s password:
root@romulus:~# pwd
/home/root