module top(
input wire sys_clk ,
input wire sys_rst_n ,
input wire [7:0] ad_data ,
output wire ds ,
output wire oe ,
output wire shcp ,
output wire stcp ,
output wire ad_clk
);
// 例化间连线
wire [15:0] volt_w ;
wire [19:00] data_w ;
assign data_w = {4'b0000,volt_w} ;
wire [05:00] point_w ;
assign point_w = 6'b001_000 ;
wire sign_w ;
wire seg_en_w ;
assign seg_en_w = 1'b1 ;
dig_volt dig_volt_insert(
.sys_clk ( sys_clk ) ,
.sys_rst_n ( sys_rst_n ) ,
.ad_data ( ad_data ) ,
.volt ( volt_w ) ,
.sign ( sign_w ) ,
.ad_clk ( ad_clk )
);
seg_595_dynamic seg_595_dynamic_insert(
.sys_clk ( sys_clk ) ,
.sys_rst_n ( sys_rst_n ) ,
.data ( data_w ) ,
.point ( point_w ) ,
.sign ( sign_w ) ,
.seg_en ( seg_en_w ) ,
.ds ( ds ) ,
.oe ( oe ) ,
.shcp ( shcp ) ,
.stcp ( stcp )
);
endmodule
module dig_volt(
input wire sys_clk ,
input wire sys_rst_n ,
input wire [7:0] ad_data ,
output reg [15:0] volt ,
output reg sign ,
output wire ad_clk
);
// reg signal define
reg cnt_ad_clk ;
reg ad_clk_reg ; // 四分频。
reg [19:0] cnt_1024 ;
reg sum_en ;
reg sum_en_reg1 ;
reg sum_en_reg2 ;
reg [19:0] sum_1024 ;
reg [19:0] data_medium ;
reg [19:0] data_n_fenmm;
reg [19:0] data_p_fenmm;
reg [28:0] data_n ;
reg [28:0] data_p ;
reg [15:0] volt_reg ;
// reg cnt_ad_clk ;
always @(posedge sys_clk or negedge sys_rst_n)
if(~sys_rst_n)
cnt_ad_clk <= 1'b0 ;
else
cnt_ad_clk <= cnt_ad_clk + 1'b1 ; // 溢出自动归零
// reg ad_clk_reg ;
always @(posedge sys_clk or negedge sys_rst_n)
if(~sys_rst_n)
ad_clk_reg <= 1'b0 ;
else if(cnt_ad_clk == 1'b1)
ad_clk_reg <= ~ad_clk_reg ;
// reg [19:0] cnt_1024 ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
cnt_1024 <= 20'd0 ;
else if(cnt_1024 == 20'd1025)
cnt_1024 <= cnt_1024 ;
else
cnt_1024 <= cnt_1024 + 1'b1 ;
// reg sum_en ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
sum_en <= 1'b0 ;
else if(cnt_1024 == 20'd1025)
sum_en <= 1'b1 ;
else
sum_en <= 1'b0 ;
// reg sum_en_reg1 ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
sum_en_reg1 <= 1'b0 ;
else
sum_en_reg1 <= sum_en ;
// reg sum_en_reg2 ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
sum_en_reg2 <= 1'b0 ;
else
sum_en_reg2 <= sum_en_reg1 ;
// reg [19:0] sum_1024 ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
sum_1024 <= 20'd0 ;
else if(cnt_1024 >= 20'd1 && cnt_1024 <= 20'd1024)
sum_1024 <= sum_1024 + ad_data ;
else
sum_1024 <= sum_1024 ;
// reg [19:0] data_medium ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
data_medium <= 20'd0 ;
else if(cnt_1024 == 20'd1025)
data_medium <= sum_1024 / 20'd1024 ;
else
data_medium <= data_medium ;
// reg [19:0] data_n_fenmm;
// reg [19:0] data_p_fenmm;
always @(posedge ad_clk_reg or negedge sys_rst_n) begin
if(~sys_rst_n) begin
data_n_fenmm <= 20'd0 ;
data_p_fenmm <= 20'd0 ;
end else begin
if(sum_en == 1'b1) begin
data_n_fenmm <= data_medium + 1'd1 ;
data_p_fenmm <= 20'd256 - data_medium;
end
end
end
// reg [28:0] data_n ;
// reg [28:0] data_p ;
always @(posedge ad_clk_reg or negedge sys_rst_n) begin
if(~sys_rst_n) begin
data_n <= 26'd0 ;
data_p <= 26'd0 ;
end else begin
if(sum_en_reg1 == 1'b1) begin
data_n <= 26'd40960000 / data_n_fenmm ;
data_p <= 26'd40960000 / data_p_fenmm ;
end else begin
data_n <= 26'd0 ;
data_p <= 26'd0 ;
end
end
end
// reg [15:0] volt_reg ;
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
volt_reg <= 16'd0 ;
else if(sum_en_reg2 == 1'b1 && ad_data >= data_medium)
volt_reg <= ((data_p * (ad_data - data_medium)) >> 4'd13) ;
else if(sum_en_reg2 == 1'b1 && ad_data < data_medium)
volt_reg <= ((data_n * (data_medium - ad_data)) >> 4'd13) ;
else
volt_reg <= 16'd0 ;
// reg [15:0] volt ,
always @(posedge ad_clk_reg or negedge sys_rst_n) begin
if(~sys_rst_n) begin
volt <= 16'd0 ;
end else begin
volt <= volt_reg ;
end
end
// sign
always @(posedge ad_clk_reg or negedge sys_rst_n)
if(~sys_rst_n)
sign <= 1'b0 ;
else if(sum_en_reg2 == 1'b1 && ad_data < data_medium) // 小于中值有符号位.
sign <= 1'b1 ;
else
sign <= 1'b0 ;
// wire ad_clk
assign ad_clk = ~ad_clk_reg ;
endmodule
`timescale 1ns/1ns
module test_top();
reg sys_clk ;
reg sys_rst_n ;
reg [7:0] ad_data ;
reg data_en ; // 当数据使能信号为低电平，ad_data == 125 ;高，把ad_data_reg 赋值给ad_data.
reg [7:0] ad_data_reg ; // 数据寄存。
wire ds ;
wire oe ;
wire shcp ;
wire stcp ;
wire ad_clk ;
top top_insert(
.sys_clk ( sys_clk ) ,
.sys_rst_n ( sys_rst_n ) ,
.ad_data ( ad_data ) ,
.ds ( ds ) ,
.oe ( oe ) ,
.shcp ( shcp ) ,
.stcp ( stcp ) ,
.ad_clk ( ad_clk )
);
parameter CYCLE = 20 ;
initial begin
sys_clk = 1'b1 ;
sys_rst_n <= 1'b0 ;
data_en <= 1'b0 ;
#(CYCLE * 10) ;
sys_rst_n <= 1'b1 ;
#(CYCLE * 4 * 5000) ;
data_en <= 1'b1 ;
end
always #(CYCLE / 2) sys_clk = ~sys_clk ;
// reg data_en ; // 当数据使能信号为低电平，ad_data == 125 ;高，把ad_data_reg 赋值给ad_data.
// reg [7:0] ad_data_reg ; // 数据寄存。
always @(posedge sys_clk or negedge sys_rst_n) begin
if(~sys_rst_n) begin
ad_data_reg <= 1'b0 ;
end else begin
ad_data_reg <= ad_data_reg + 1'b1 ;
end
end
// reg [7:0] ad_data ;
always @(posedge ad_clk or negedge sys_rst_n) begin
if(~sys_rst_n) begin
ad_data <= 1'b0 ;
end else begin
if(data_en == 1'b0) begin
ad_data <= 8'd125 ;
end else begin
ad_data <= ad_data_reg ;
end
end
end
endmodule
