SS-MPAC (Simplified Sectorized MultiProbe Anechoic Chamber)

SS-MPAC (Simplified Sectorized MultiProbe Anechoic Chamber)

The concept of SS MPAC is to use multiple probes around UE as illulstrated below to emulate more realistic radio channel condition.

< R4-1706669 : Figure 2. Installed probes in the sector and UE >

The major motivation of SS MPAC is well described in R4-1706669 as follows :

  1. Real--time system performance assessment, i.e. while communicating

  2. Capable of emulating realistic radio channels, meaning with realistic angular distributions of waves, either irradiating EU or being radiated by it

  3. Up-- and downlink performance, or reception and response in multi--node configurations

相关推荐
limitless_peter1 天前
集成运算放大器(反向比例,同相比例)
嵌入式硬件·硬件工程
Be Legendary-CGK4 天前
三极管的基极为什么需要下拉电阻
单片机·嵌入式硬件·硬件工程
国科安芯4 天前
MCU外设初始化:为什么参数配置必须优先于使能
网络·单片机·嵌入式硬件·性能优化·硬件工程
针不戳202209265 天前
PFC是什么
嵌入式硬件·学习·硬件工程
无情的8866 天前
LVPECL、LVDS、LVTTL、LVCMOS四种逻辑电平标准的全面对比
硬件工程
粟米茶8 天前
差分放大电路的四种接法
硬件工程·硬件电路·三极管·运放
XINVRY-FPGA10 天前
XCKU115-2FLVB2104E AMD Xilinx Kintex UltraScale FPGA
嵌入式硬件·计算机视觉·fpga开发·云计算·硬件工程·dsp开发·fpga
XINVRY-FPGA10 天前
XCZU19EG-2FFVB1517I FPGA Xilinx AMD ZynqUltraScale+ MPSoC
arm开发·嵌入式硬件·fpga开发·硬件架构·硬件工程·dsp开发·fpga
谢工碎碎念11 天前
PCB工艺-四层板制作流程(简单了解下)
嵌入式硬件·物联网·硬件工程·iot·pcb工艺
码小文12 天前
Altium Designer 22使用笔记(4)---添加封装、ERC检查、PDF文档与BOM生成
笔记·嵌入式硬件·硬件工程·学习方法·硬件经验