xsct xsdb 调试寄存器

提示符 xsdb xsct 通用；

老版本的vivado vitis 可能没有
复制代码
****** Xilinx Software Commandline Tool (XSCT) v2022.1.0
  **** SW Build 303 on 2022-04-13-17:42:48
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.


xsct% cd {C:\work_folder\case\case00441451}
xsct% pwd
C:/work_folder/case/case00441451
xsct% ls
WARNING: [Common 17-259] Unknown Tcl command 'ls' sending command to the OS shell for execution. It is recommended to use 'exec' to send the command to the OS shell.
design_1_wrapper.pdi
xsct% connect
attempting to launch hw_server

****** Xilinx hw_server v2022.1
  **** Build date : Apr 18 2022 at 16:02:36
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.

INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application



****** Xilinx hw_server v2022.1

  **** Build date : Apr 18 2022 at 16:02:36

    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.



INFO: hw_server application started

INFO: Use Ctrl-C to exit hw_server application




INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121



tcfchan#0
xsct% ta
  1  Versal xcvc1902
     2  RPU (PS POR is active)
        3  Cortex-R5 #0 (PS POR is active)
        4  Cortex-R5 #1 (PS POR is active)
     5  APU (FPD domain isolation)
        6  Cortex-A72 #0 (FPD domain isolation)
        7  Cortex-A72 #1 (FPD domain isolation)
     8  PPU
        9  MicroBlaze PPU (Sleeping after reset)
    10  PSM
    11  PMC
    12  PL
 13  DPC
xsct% ta 1
xsct% ta
  1* Versal xcvc1902
     2  RPU (PS POR is active)
        3  Cortex-R5 #0 (PS POR is active)
        4  Cortex-R5 #1 (PS POR is active)
     5  APU (FPD domain isolation)
        6  Cortex-A72 #0 (FPD domain isolation)
        7  Cortex-A72 #1 (FPD domain isolation)
     8  PPU
        9  MicroBlaze PPU (Sleeping after reset)
    10  PSM
    11  PMC
    12  PL
 13  DPC
xsct% device program design_1_wrapper.pdi
100%    1MB   1.4MB/s  00:01
xsct% ta
  1* Versal xcvc1902
     2  RPU (Reset)
        3  Cortex-R5 #0 (RPU PGE Reset)
        4  Cortex-R5 #1 (RPU PGE Reset)
     5  APU
        6  Cortex-A72 #0 (Power On Reset)
        7  Cortex-A72 #1 (Power On Reset)
     8  PPU
        9  MicroBlaze PPU (Sleeping)
    10  PSM
       14  MicroBlaze PSM (Sleeping)
    11  PMC
    12  PL
 13  DPC
xsct% ta 6
xsct% ta
  1  Versal xcvc1902
     2  RPU (Reset)
        3  Cortex-R5 #0 (RPU PGE Reset)
        4  Cortex-R5 #1 (RPU PGE Reset)
     5  APU
        6* Cortex-A72 #0 (Power On Reset)
        7  Cortex-A72 #1 (Power On Reset)
     8  PPU
        9  MicroBlaze PPU (Sleeping)
    10  PSM
       14  MicroBlaze PSM (Sleeping)
    11  PMC
    12  PL
 13  DPC
xsct% rst -processor
WARNING: If the reset is being triggered after powering on the device,
         write bootloop at reset vector address (0xffff0000), or use
         -clear-registers option, to avoid unpredictable behavior.
         Further warnings will be suppressed
WARNING: Default system will be activated before triggering reset.
         Use skip-activate-subsystem to skip this.
         Further warnings will be suppressed
Info: Cortex-A72 #0 (target 6) Stopped at 0xffff0000 (Reset Catch)
xsct% ta
  1  Versal xcvc1902
     2  RPU
        3  Cortex-R5 #0 (Halted)
        4  Cortex-R5 #1 (Lock Step Mode)
     5  APU
        6* Cortex-A72 #0 (Reset Catch, EL3(S)/A64)
        7  Cortex-A72 #1 (Power On Reset)
     8  PPU
        9  MicroBlaze PPU (Sleeping)
    10  PSM
       14  MicroBlaze PSM (Sleeping)
    11  PMC
    12  PL
 13  DPC
xsct% mwr -force 0x20100000000 0x12345678
xsct% mrd -force 0x20100000000
     20100000000:   12345678

xsct%