编译和运行qemu-uboot-arm64单板的Armbian系统

xunknown2024-06-12 17:59

这篇文章ARM虚拟机安装OMV-CSDN博客遗留一个启动qemu-uboot-arm64单板Armbian镜像的问题，使用官方下载的镜像，会报错：

fatal: no kernel available

....

Failed to load '/vmlinuz'

......

bash 复制代码 
qemu-system-aarch64 -smp 8 -m 8G -machine virt -nographic -cpu cortex-a72 -bios Armbian_24.5.0-trunk.558_Qemu-uboot-arm64_noble_current_6.6.30_minimal.u-boot.bin -nic user,model=virtio-net-pci -drive if=none,media=disk,id=drive0,file=Armbian_24.5.0-trunk.558_Qemu-uboot-arm64_noble_current_6.6.30_minimal.img.qcow2,discard=unmap,detect-zeroes=unmap -device virtio-blk-pci,drive=drive0,bootindex=0


U-Boot 2023.10-armbian (Mar 14 2024 - 01:18:23 +0000)

DRAM:  8 GiB
Core:  51 devices, 14 uclasses, devicetree: board
Flash: 64 MiB
Loading Environment from Flash... *** Warning - bad CRC, using default environment

In:    pl011@9000000
Out:   pl011@9000000
Err:   pl011@9000000
Net:   eth0: virtio-net#32
Hit any key to stop autoboot:  0 
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning global bootmeth 'efi_mgr':
Scanning bootdev 'fw-cfg@9020000.bootdev':
fatal: no kernel available
No working controllers found
scanning bus for devices...
Scanning bootdev 'virtio-blk#33.bootdev':
  0  script       ready   virtio       1  virtio-blk#33.bootdev.par /boot/boot.scr
** Booting bootflow 'virtio-blk#33.bootdev.part_1' with script
Device 0: 1af4 VirtIO Block Device
            Type: Hard Disk
            Capacity: 54352.0 MB = 53.0 GB (111312896 x 512)
<DIR>       4096 .
<DIR>       4096 ..
<SYM>         28 Image
<SYM>         24 dtb
<SYM>         31 initrd.img
<SYM>         31 initrd.img.old
<SYM>         28 vmlinuz
<SYM>         28 vmlinuz.old
<DIR>       4096 dtb-6.6.30-current-arm64
           38518 boot.bmp
               0 .next
<SYM>         28 uInitrd
             906 boot.cmd
         6040282 System.map-6.6.30-current-arm64
             978 boot.scr
        48396294 uInitrd-6.6.30-current-arm64
          318803 config-6.6.30-current-arm64
        38134272 vmlinuz-6.6.30-current-arm64
        48396230 initrd.img-6.6.30-current-arm64
KERNEL LOAD ADDRESS: kernel_addr_r : 0x40400000
INITRD LOAD ADDRESS: ramdisk_addr_r: 0x44000000
FDT LOAD ADDRESS   : fdt_addr      : 0x40000000
Failed to load '/vmlinuz'
48396294 bytes read in 22 ms (2 GiB/s)
Bad Linux ARM64 Image magic!
Boot failed (err=-14)
BOOTP broadcast 1
DHCP client bound to address 10.0.2.15 (1 ms)
Scanning bootdev 'virtio-net#32.bootdev':
BOOTP broadcast 1
DHCP client bound to address 10.0.2.15 (0 ms)
*** Warning: no boot file name; using '0A00020F.img'
Using virtio-net#32 device
TFTP from server 10.0.2.2; our IP address is 10.0.2.15
Filename '0A00020F.img'.
Load address: 0x40400000
Loading: *
TFTP error: 'Access violation' (2)
Not retrying...
No more bootdevs
---  -----------  ------  --------  ----  ------------------------  ----------------
(1 bootflow, 1 valid)
=>

说明：上面的启动命令，参考config/boards/qemu-uboot-arm64.csc：

qemu-system-aarch64 -smp 8 -m 8G -machine virt -nographic -cpu cortex-a72 -bios Armbian_24.5.0-trunk.558_Qemu-uboot-arm64_noble_current_6.6.30_minimal.u-boot.bin -nic user,model=virtio-net-pci -drive if=none,media=disk,id=drive0,file=Armbian_24.5.0-trunk.558_Qemu-uboot-arm64_noble_current_6.6.30_minimal.img.qcow2,discard=unmap,detect-zeroes=unmap -device virtio-blk-pci,drive=drive0,bootindex=0

在网上找了好几轮，没有找到启动的方法，但是根据这篇文章Running self-build image on QEMU arm64 - Beginners - Armbian Community Forums

作者编译和启动qemu-uboot-arm64 Armbian镜像是没有问题的，因此考虑自己编译qemu-uboot-arm64镜像。

参考官网文档下载Armbian编译项目。

因为Armbian编译有系统要求，我使用了VirtualBox安装Ubuntu 22.04服务器虚拟机来编译（在Ubuntu 24.04系统上编译遇到Docker的问题无法编译，后续再研究）。

bash 复制代码 
apt-get -y install git
git clone --depth=1 --branch=main https://github.com/armbian/build
cd build
./compile.sh

按照上面的方式，选择uefi-arm64单板编译，可以成功编译出镜像并运行（运行uefi-arm64参考开头提到的OMV安装的文章）。

但是在编译qemu-uboot-arm64单板的时候遇到问题：u-boot的Makefile（https://raw.githubusercontent.com/u-boot/u-boot/4459ed60cb1e0562bc5b40405e2b4b9bbf766d57/Makefile）由于网络的原因一直无法下载成功。

bash 复制代码 
./compile.sh BOARD=qemu-uboot-arm64 BRANCH=current RELEASE=bookworm

解决办法：

编译命令增加UBOOT_MIRROR=gitee，将u-boot改为从gitee下载：

bash 复制代码 
./compile.sh BOARD=qemu-uboot-arm64 BRANCH=current RELEASE=bookworm UBOOT_MIRROR=gitee

但实际上执行这个命令，u-boot还是从github下载，而不是预期的gitee。

一番跟踪代码之后，发现是UBOOT_MIRROR没有生效，再修改config/sources/families/include/uefi_common.inc文件，把BOOTSOURCE改为"${MAINLINE_UBOOT_SOURCE}"：

bash 复制代码 
[192.168.2.108] alpha@mascot.x ~/workspace/armbian/build $ git diff
diff --git a/config/sources/families/include/uefi_common.inc b/config/sources/families/include/uefi_common.inc
index a58f794..a783b07 100644
--- a/config/sources/families/include/uefi_common.inc
+++ b/config/sources/families/include/uefi_common.inc
@@ -47,7 +47,8 @@ if [[ "${QEMU_UBOOT_BOOTCONFIG}" != "" ]]; then
 
        declare -g BOOTDIR="qemu-uboot-${LINUXFAMILY}"
        declare -g BOOTBRANCH='tag:v2023.10'
-       declare -g BOOTSOURCE='https://github.com/u-boot/u-boot' # Gotta set this again, it is unset by grub extension
+       #declare -g BOOTSOURCE='https://github.com/u-boot/u-boot' # Gotta set this again, it is unset by grub extension
+       declare -g BOOTSOURCE="${MAINLINE_UBOOT_SOURCE}"
 
        declare -g BOOTCONFIG="${QEMU_UBOOT_BOOTCONFIG}"
        add_packages_to_image spice-vdagent qemu-guest-agent # Nice-to-have packages for running under qemu

再次执行上面的编译命令（或者下面更完整的编译命令），终于u-boot可以从gitee下载，可以顺利编译出qemu-uboot-arm64单板镜像（中途有出错，重新编译就可以了）：

bash 复制代码 
./compile.sh build BOARD=qemu-uboot-arm64 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=bookworm UBOOT_MIRROR=gitee

并且可以运行：

bash 复制代码 
qemu-system-aarch64 -smp 8 -m 8G -machine virt -nographic -cpu cortex-a72 -bios Qemu-uboot-arm64/Armbian-unofficial_24.8.0-trunk_Qemu-uboot-arm64_bookworm_current_6.6.32.u-boot.bin -nic user,model=virtio-net-pci -drive if=none,media=disk,id=drive0,file=Qemu-uboot-arm64/Armbian-unofficial_24.8.0-trunk_Qemu-uboot-arm64_bookworm_current_6.6.32.img.qcow2,discard=unmap,detect-zeroes=unmap -device virtio-blk-pci,drive=drive0,bootindex=0


U-Boot 2023.10-armbian (May 20 2024 - 00:43:01 +0000)

DRAM:  8 GiB
Core:  51 devices, 14 uclasses, devicetree: board
Flash: 64 MiB
Loading Environment from Flash... *** Warning - bad CRC, using default environment

In:    pl011@9000000
Out:   pl011@9000000
Err:   pl011@9000000
Net:   eth0: virtio-net#32
Hit any key to stop autoboot:  0 
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning global bootmeth 'efi_mgr':
Scanning bootdev 'fw-cfg@9020000.bootdev':
fatal: no kernel available
No working controllers found
scanning bus for devices...
Scanning bootdev 'virtio-blk#33.bootdev':
  0  script       ready   virtio       1  virtio-blk#33.bootdev.par /boot/boot.scr
** Booting bootflow 'virtio-blk#33.bootdev.part_1' with script
Device 0: 1af4 VirtIO Block Device
            Type: Hard Disk
            Capacity: 55240.0 MB = 53.9 GB (113131520 x 512)
<DIR>       4096 .
<DIR>       4096 ..
<SYM>         28 Image
<SYM>         24 dtb
<DIR>       4096 dtb-6.6.32-current-arm64
           38518 boot.bmp
               0 .next
<SYM>         28 uInitrd
             906 boot.cmd
         6064562 System.map-6.6.32-current-arm64
             978 boot.scr
        94944593 uInitrd-6.6.32-current-arm64
          324676 config-6.6.32-current-arm64
        38226432 vmlinuz-6.6.32-current-arm64
        94944529 initrd.img-6.6.32-current-arm64
KERNEL LOAD ADDRESS: kernel_addr_r : 0x40400000
INITRD LOAD ADDRESS: ramdisk_addr_r: 0x44000000
FDT LOAD ADDRESS   : fdt_addr      : 0x40000000
38226432 bytes read in 7 ms (5.1 GiB/s)
94944593 bytes read in 21 ms (4.2 GiB/s)
## Loading init Ramdisk from Legacy Image at 44000000 ...
   Image Name:   uInitrd
   Created:      2024-06-04  15:54:47 UTC
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    94944529 Bytes = 90.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 40000000
   Booting using the fdt blob at 0x40000000
Working FDT set to 40000000
   Loading Ramdisk to fa574000, end fffffd11 ... OK
   Loading Device Tree to 00000000fa471000, end 00000000fa573fff ... OK
Working FDT set to fa471000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 6.6.32-current-arm64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Sat May 25 14:22:56 UTC 2024
[    0.000000] KASLR enabled

参考：

编译Armbian：

Building Armbian - Armbian Documentation

GitHub - armbian/build: Armbian Linux build framework generates custom Debian or Ubuntu image for x86, aarch64, riscv64 & armhf

Running self-build image on QEMU arm64 - Beginners - Armbian Community Forums

Running self-build image on QEMU arm64：Running self-build image on QEMU arm64 - Beginners - Armbian Community Forums
https://github.com/armbian/build/issues/5168

qemu-uboot-arm64编译失败解决：

https://github.com/armbian/build/issues/5168

相关推荐
ldinvicible6 分钟前
How to run Flutter on an Embedded Device
linux
YRr YRr1 小时前
解决Ubuntu 20.04上编译OpenCV 3.2时遇到的stdlib.h缺失错误
linux·opencv·ubuntu
认真学习的小雅兰.1 小时前
如何在Ubuntu上利用Docker和Cpolar实现Excalidraw公网访问高效绘图——“cpolar内网穿透”
linux·ubuntu·docker
zhou周大哥1 小时前
linux 安装 ffmpeg 视频转换
linux·运维·服务器
不想起昵称9292 小时前
Linux SHELL脚本中的变量与运算
linux
the丶only2 小时前
单点登录平台Casdoor搭建与使用，集成gitlab同步创建删除账号
linux·运维·服务器·docker·gitlab
枫叶红花3 小时前
【Linux系统编程】：信号（2）——信号的产生
linux·运维·服务器
_微风轻起3 小时前
linux下网络编程socket&select&epoll的底层实现原理
linux·网络
WANGWUSAN664 小时前
Python高频写法总结！
java·linux·开发语言·数据库·经验分享·python·编程
热门推荐
01〔AI 绘画〕Stable Diffusion 之 解决绘制多人或面部很小的人物时面部崩坏问题 篇02YOLOv8训练好模型后，追加轮数继续训练、或者提前终止训练，缩减训练轮数03玄机平台应急响应—webshell查杀04机器人编程怎么入门？05HCIA-datacom数通题库和录播视频资料06Docker 夺命连环 15 问07SQL 主从数据库实时备份08校验 GPT-4 真实性的三个经典问题：快速区分 GPT-3.5 与 GPT-4，并提供免费测试网站09(欧拉)openEuler系统添加网卡文件配置流程、(欧拉)openEuler系统手动配置ipv6地址流程、(欧拉)openEuler系统网络管理说明10VSCode插件 —— Cody AI （免费AI助手！）