安装驱动导致ubuntu开不了机

ubuntu系统,安装mmdeploy时想换nvidia驱动,换了之后按网上说的换cuda,重启后出问题,进不了系统,黑屏,闪烁之后也不出来字,出不来系统选择目录。

把主板上的纽扣电池拿下来放电,过几分钟后装上,系统能进系统选择界面了。

但进入到系统初始界面后就卡住,Ctrl+Fx一开始也会卡住,在started GNOME Display Manager这一行,重启几次后按Ctrl+Fx可以切换到其他tty,但时会闪烁一段时间,后来就好了可以登陆。

nvidia-smi也会有响应,但就是没有可视化界面。应该是nvidia驱动相关的问题。

ipmitool lan print 利用服务器工具远程可以看显示器画面

Set in Progress : Set Complete

Auth Type Support : NONE MD2 MD5 PASSWORD

Auth Type Enable : Callback : MD2 MD5 PASSWORD

: User : MD2 MD5 PASSWORD

: Operator : MD2 MD5 PASSWORD

: Admin : MD2 MD5 PASSWORD

: OEM : MD2 MD5 PASSWORD

IP Address Source : DHCP Address

IP Address : 192.168.8.11

Subnet Mask : 255.255.255.0

MAC Address : ac:1f:6b:e6:ce:bb

SNMP Community String : public

IP Header : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00

BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled

Default Gateway IP : 192.168.8.1

Default Gateway MAC : 00:00:00:00:00:00

Backup Gateway IP : 0.0.0.0

Backup Gateway MAC : 00:00:00:00:00:00

802.1q VLAN ID : Disabled

802.1q VLAN Priority : 0

RMCP+ Cipher Suites : 1,2,3,6,7,8,11,12

Cipher Suite Priv Max : XaaaXXaaaXXaaXX

: X=Cipher Suite Unused

: c=CALLBACK

: u=USER

: o=OPERATOR

: a=ADMIN

: O=OEM

Bad Password Threshold : 3

Invalid password disable: yes

Attempt Count Reset Int.: 300

User Lockout Interval : 300

cd /etc/X11/ 该目录下是与界面相关的内容

ls

app-defaults default-display-manager fonts xinit xorg.conf.backup Xreset Xresources Xsession.d xsm Xwrapper.config

cursors default-display-manager.dpkg-tmp rgb.txt xkb xrdp Xreset.d Xsession Xsession.options XvMCConfig

cat xorg.conf.backup

nvidia-xconfig: X configuration file generated by nvidia-xconfig

nvidia-xconfig: version 450.66

Section "ServerLayout"

Identifier "Layout0"

Screen 0 "Screen0" 0 0

InputDevice "Keyboard0" "CoreKeyboard"

InputDevice "Mouse0" "CorePointer"

EndSection

Section "Files"

EndSection

Section "InputDevice"

generated from default

Identifier "Mouse0"

Driver "mouse"

Option "Protocol" "auto"

Option "Device" "/dev/psaux"

Option "Emulate3Buttons" "no"

Option "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"

generated from default

Identifier "Keyboard0"

Driver "kbd"

EndSection

Section "Monitor"

Identifier "Monitor0"

VendorName "Unknown"

ModelName "Unknown"

Option "DPMS"

EndSection

Section "Device"

Identifier "Device0"

Driver "nvidia"

VendorName "NVIDIA Corporation"

EndSection

Section "Screen"

Identifier "Screen0"

Device "Device0"

Monitor "Monitor0"

DefaultDepth 24

SubSection "Display"

Depth 24

EndSubSection

EndSection

cat default-display-manager

/usr/sbin/gdm3

systemctl status lightdm

● lightdm.service - Light Display Manager

Loaded: loaded (/lib/systemd/system/lightdm.service; static; vendor preset: enabled)

Active: inactive (dead)

Docs: man:lightdm(1)

root@lthpc:/etc/X11# systemctl start lightdm

Job for lightdm.service failed because the control process exited with error code.

See "systemctl status lightdm.service" and "journalctl -xe" for details.

root@lthpc:/etc/X11# journalctl -xe

-- Unit lightdm.service has finished shutting down.

Dec 29 17:34:18 lthpc systemd[1]: Starting Light Display Manager...

-- Subject: Unit lightdm.service has begun start-up

-- Defined-By: systemd

-- Support: http://www.ubuntu.com/support

--

-- Unit lightdm.service has begun starting up.

Dec 29 17:34:18 lthpc systemd[1]: lightdm.service: Control process exited, code=exited status=1

Dec 29 17:34:18 lthpc systemd[1]: lightdm.service: Failed with result 'exit-code'.

Dec 29 17:34:18 lthpc systemd[1]: Failed to start Light Display Manager.

-- Subject: Unit lightdm.service has failed

-- Defined-By: systemd

-- Support: http://www.ubuntu.com/support

--

-- Unit lightdm.service has failed.

--

-- The result is RESULT.

Dec 29 17:34:19 lthpc systemd[1]: lightdm.service: Service hold-off time over, scheduling restart.

Dec 29 17:34:19 lthpc systemd[1]: lightdm.service: Scheduled restart job, restart counter is at 5.

-- Subject: Automatic restarting of a unit has been scheduled

-- Defined-By: systemd

-- Support: http://www.ubuntu.com/support

--

-- Automatic restarting of the unit lightdm.service has been scheduled, as the result for

-- the configured Restart= setting for the unit.

Dec 29 17:34:19 lthpc systemd[1]: Stopped Light Display Manager.

-- Subject: Unit lightdm.service has finished shutting down

-- Defined-By: systemd

-- Support: http://www.ubuntu.com/support

--

-- Unit lightdm.service has finished shutting down.

Dec 29 17:34:19 lthpc systemd[1]: lightdm.service: Start request repeated too quickly.

Dec 29 17:34:19 lthpc systemd[1]: lightdm.service: Failed with result 'exit-code'.

Dec 29 17:34:19 lthpc systemd[1]: Failed to start Light Display Manager.

-- Subject: Unit lightdm.service has failed

-- Defined-By: systemd

-- Support: http://www.ubuntu.com/support

--

-- Unit lightdm.service has failed.

--

-- The result is RESULT.

可视化界面起不来。

nvidia-uninstall 删一遍

sudo apt-get remove --purge nvidia*

--purge是完全卸载驱动程序,包括配置文件和依赖项;nvidia*表示卸载所有与nvidia相关的软件。

完事后sudo reboot。

wget https://cn.download.nvidia.cn/XFree86/Linux-x86_64/535.146.02/NVIDIA-Linux-x86_64-535.146.02.run

chmod a+x NVIDIA-Linux-x86_64-535.146.02.run

./NVIDIA-Linux-x86_64-535.146.02.run --no-opengl-files

--no-opengl-files

Would you like to register the kernel module souces with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later?

询问是否要使用DKMS注册内核模块,这样更新Linux内核后会自动生成新的模块,选择no

Would you like to run the nvidia-xconfigutility to automatically update your x configuration so that the NVIDIA x driver will be used when you restart x? Any pre-existing x confile will be backed up. 选择 Yes

df -h 查看系统存储情况

Filesystem Size Used Avail Use% Mounted on

udev 63G 0 63G 0% /dev

tmpfs 13G 2.5M 13G 1% /run

/dev/sda7 182G 153G 20G 89% /

tmpfs 63G 0 63G 0% /dev/shm

tmpfs 5.0M 4.0K 5.0M 1% /run/lock

tmpfs 63G 0 63G 0% /sys/fs/cgroup

/dev/sda5 943M 285M 593M 33% /boot

tmpfs 13G 0 13G 0% /run/user/1000

tmpfs 13G 4.0K 13G 1% /run/user/121

最终重装了下桌面 可以进了

sudo apt-get remove --purge nvidia-* # 卸载nvidia相关组件

sudo apt purge gdm gdm3 # 卸载gdm和gdm3

sudo apt install gdm3 ubuntu-desktop # 重新安装gdm3

systemctl restart gdm # 重新启动gdm3服务

或者 apt-get install --reinstall ubuntu-desktop

gdm3和lightdm切换:sudo dpkg-reconfigure gdm3

感谢这个好用

相关推荐
Lupino1 小时前
我把 OpenClaw 装到服务器上后,才明白它真正该装在哪里(实战复盘)
运维
蝎子莱莱爱打怪2 小时前
ESXi 强制断电后恢复CentOS7虚拟机避坑指南:解决重复注册&目录清理难题
linux·后端·程序员
xlp666hub1 天前
Leetcode第五题:用C++解决盛最多水的容器问题
linux·c++·leetcode
张宏2361 天前
原子操作 (基于Linux 应用层 C 语言)
linux
kymjs张涛2 天前
OpenClaw 学习小组:初识
android·linux·人工智能
程序设计实验室2 天前
经历分享,发现挖矿木马后,服务器快速备份与重装(腾讯云平台)
linux
Miku162 天前
OpenClaw-Linux+飞书官方Plugin安装指南
linux·人工智能·agent
Miku162 天前
OpenClaw 接入 QQ Bot 完整实践指南
linux·人工智能·agent
Yogurt_cry2 天前
[树莓派4B] 闲置近10年的爱普生 L310 打印机爆改无线打印机
linux·物联网·树莓派
爱吃橘子橙子柚子3 天前
3CPU性能排查总结(超详细)【Linux性能优化】
运维·cpu