目录
STM32作业设计
STM32作业实现(一)串口通信
STM32作业实现(二)串口控制led
STM32作业实现(三)串口控制有源蜂鸣器
STM32作业实现(四)光敏传感器
STM32作业实现(五)温湿度传感器dht11
STM32作业实现(六)闪存保存数据
STM32作业实现(七)OLED显示数据
STM32作业实现(八)触摸按键TPAD
STM32作业实现(九)驱动舵机
源码位置
开启IIC所需引脚(ssd1306)
编写ssd1306驱动文件
oled.h
c
#ifndef __OLED_H__
#define __OLED_H__
#include "stm32f1xx_hal.h" //链接HAL库
/**************************************
BMP图片声明
图片格式为二位数组，下标分别对应图片的宽和高：
BMP_xx[H/8][L];
**************************************/
extern const uint8_t BMP_Picture[32 / 8][32];
/* 设置坐标点的状态 */
typedef enum
{
SET_PIXEL = 0x01,
RESET_PIXEL = 0x00,
} PixelStatus;
/* 功能函数声明 */
// 写数据，硬件IIC使用
void HAL_I2C_WriteByte(uint8_t addr, uint8_t data);
// 写命令
void WriteCmd(uint8_t IIC_Command);
// 写数据
void WriteDat(uint8_t IIC_Data);
// 初始化OLED
void OLED_Init(void);
// 设置起始点坐标
void OLED_SetPos(unsigned char x, unsigned char y);
// 开启电荷泵
void OLED_ON(void);
// 关闭电荷泵
void OLED_OFF(void);
// 刷新缓冲区数据到GDDRAM
void OLED_RefreshRAM(void);
// 清除数据缓冲区OLED_RAM buffer
void OLED_ClearRAM(void);
// 全屏填充
void OLED_FullyFill(uint8_t fill_Data);
// 清屏
void OLED_FullyClear(void);
// 获得坐标像素点数据
PixelStatus OLED_GetPixel(int16_t x, int16_t y);
/* 显示指定字符和图片时需要手动刷新缓冲区到GDDRAM
* function list: OLED_ShowStr\OLED_ShowCN\OLED_Show_MixedCH\OLED_DrawBMP
*/
// 显示英文字符串
void OLED_ShowStr(unsigned char x, unsigned char y, unsigned char *ch, unsigned char TextSize);
// 显示整数用的
void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch, unsigned char j, unsigned char TextSize);
// 显示中文字符串
void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N);
// 全屏垂直滚动播放
void OLED_VerticalShift(void);
// 全屏水平滚动播放
void OLED_HorizontalShift(uint8_t direction);
// 全屏同时垂直和水平滚动播放
void OLED_VerticalAndHorizontalShift(uint8_t direction);
// 屏幕内容取反显示
void OLED_DisplayMode(uint8_t mode);
// 屏幕亮度调节
void OLED_IntensityControl(uint8_t intensity);
//--------------------------------------------------------------
// Prototype : void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[]);
// Calls :
// Parameters : x0,y0 -- 起始点坐标(x0:0~127, y0:0~7); x1,y1 -- 起点对角线(结束点)的坐标(x1:1~128,y1:1~8)
// Description : 显示BMP位图
//--------------------------------------------------------------
void OLED_DrawBMP(unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, unsigned char BMP[]);
#endifoled.c
c
#include "stm32f1xx_hal.h" //链接HAL库
#include "codetap.h" //字库文件
#include "oled.h" //声明
/* 控制宏 */
#define LEFT 0x27
#define RIGHT 0x26
#define UP 0X29
#define DOWM 0x2A
#define ON 0xA7
#define OFF 0xA6
/* IIC接口选择 */
#define IICx hi2c1
extern I2C_HandleTypeDef hi2c1; // HAL库使用，指定硬件IIC接口
// oled显示尺寸
uint16_t const displayWidth = 130;
uint16_t const displayHeight = 64;
/* OLED显存
[0]0 1 2 3 ... 127
[1]0 1 2 3 ... 127
[2]0 1 2 3 ... 127
[3]0 1 2 3 ... 127
[4]0 1 2 3 ... 127
[5]0 1 2 3 ... 127
[6]0 1 2 3 ... 127
[7]0 1 2 3 ... 127 */
static uint8_t OLED_RAM[8][130]; // 定义GDDRAM缓存区
/***************************************************
I2C总线传出数据函数：
addr : 要写入的地址（OLED的地址一般为0x40;指令地址为0x00）
data : 要写入的数据
***************************************************/
void HAL_I2C_WriteByte(uint8_t addr, uint8_t data)
{
uint8_t TxData[2] = {addr, data};
HAL_I2C_Master_Transmit(&IICx, 0X78, (uint8_t *)TxData, 2, 10);
}
/**************************************************************
Prototype : void WriteCmd(uint8_t IIC_Command)
Parameters : IIC_Command
return : none
Description : 写命令（通过HAL_I2C_WriteByte中的HAL_I2C_Master_Transmit
向0x00写入命令）
***************************************************************/
void WriteCmd(uint8_t IIC_Command)
{
HAL_I2C_WriteByte(0x00, IIC_Command);
}
/**************************************************************
Prototype : void WriteDat(uint8_t IIC_Data)
Parameters : IIC_Data
return : none
Description : 写数据（通过HAL_I2C_WriteByte中的HAL_I2C_Master_Transmit
向0x40写入数据）
***************************************************************/
void WriteDat(uint8_t IIC_Data)
{
HAL_I2C_WriteByte(0x40, IIC_Data);
}
/**************************************************************
Prototype : void OLED_Init(void)
Parameters : none
return : none
Description : 初始化OLED模块
***************************************************************/
void OLED_Init(void)
{
HAL_Delay(500); // HAL延时函数
WriteCmd(0xAE); // 关显示
WriteCmd(0x20); // 设置内存寻址模式
WriteCmd(0x10); // 00，水平寻址模式;01，垂直寻址模式;10，页面寻址模式(重置);11，无效
WriteCmd(0xb0); // 为页面寻址模式设置页面开始地址，0-7
WriteCmd(0x00); //---设置低列地址
WriteCmd(0x10); //---设置高列地址
WriteCmd(0xc8); // 设置COM输出扫描方向
WriteCmd(0x40); //--设置起始行地址
WriteCmd(0x81); //--set contrast control register
WriteCmd(0xff); // 亮度调节 0x00~0xff
WriteCmd(0xa1); //--设置段重新映射0到127
WriteCmd(0xa6); //--设置正常显示
WriteCmd(0xa8); //--设置复用比(1 ~ 64)
WriteCmd(0x3F); //
WriteCmd(0xa4); // 0xa4,输出遵循RAM内容;0xa5,Output忽略RAM内容
WriteCmd(0xd3); //-设置显示抵消
WriteCmd(0x00); //-not offset
WriteCmd(0xd5); //--设置显示时钟分频/振荡器频率
WriteCmd(0xf0); //--设置分率
WriteCmd(0xd9); //--设置pre-charge时期
WriteCmd(0x22); //
WriteCmd(0xda); //--设置com大头针硬件配置
WriteCmd(0x12);
WriteCmd(0xdb); //--设置vcomh
WriteCmd(0x20); // 0x20,0.77xVcc
WriteCmd(0x8d); //--设置DC-DC
WriteCmd(0x14); //
WriteCmd(0xaf); //--打开oled面板
OLED_FullyClear(); // 清屏
}
void OLED_SetPos(unsigned char x, unsigned char y) // 设置起始点坐标
{
WriteCmd(0xb0 + y); // y表示字符在哪一行，把0.96寸的屏幕分成0~7行，8个像素
// 为一行，总高度64个像素
WriteCmd(((x & 0xf0) >> 4) | 0x10); // x表示oled屏的行像素起点位置，表示每个矩阵的左上角坐标
WriteCmd((x & 0x0f) | 0x01);
}
/**************************************************************
Prototype : void OLED_ON(void)
Parameters : none
return : none
Description : 将OLED从休眠中唤醒
***************************************************************/
void OLED_ON(void)
{
WriteCmd(0X8D); // 设置电荷泵
WriteCmd(0X14); // 开启电荷泵
WriteCmd(0XAF); // OLED唤醒
}
/**************************************************************
Prototype : void OLED_OFF(void)
Parameters : none
return : none
Description : 让OLED休眠 -- 休眠模式下,OLED功耗不到10uA
***************************************************************/
void OLED_OFF(void)
{
WriteCmd(0X8D); // 设置电荷泵
WriteCmd(0X10); // 关闭电荷泵
WriteCmd(0XAE); // OLED休眠
}
/**************************************************************
Prototype : void OLED_RefreshRAM(void)
Parameters : none
return : none
Description : 全屏填充
***************************************************************/
void OLED_RefreshRAM(void)
{
// 页寻址模式填充
for (uint16_t m = 0; m < displayHeight / 8; m++)
{
WriteCmd(0xb0 + m); // 设置页地址b0~b7
WriteCmd(0x00); // 设置显示位置---列低地址00-0f
WriteCmd(0x10); // 设置显示位置---列高地址10-1f
for (uint16_t n = 0; n < displayWidth; n++)
{
WriteDat(OLED_RAM[m][n]);
}
}
}
/**************************************************************
Prototype : void OLED_ClearRAM(void)
Parameters : none
return : none
Description : 清除数据缓冲区
***************************************************************/
void OLED_ClearRAM(void)
{
for (uint16_t m = 0; m < displayHeight / 8; m++)
{
for (uint16_t n = 0; n < displayWidth; n++)
{
OLED_RAM[m][n] = 0x00;
}
}
}
/**************************************************************
Prototype : void OLED_Fill(uint8_t fill_Data)
Parameters : fill_Data 填充的1字节数据
return : none
Description : 全屏填充 0x00~0xff
***************************************************************/
void OLED_FullyFill(unsigned char fill_Data)
{
for (uint16_t m = 0; m < displayHeight / 8; m++)
{
for (uint16_t n = 0; n < displayWidth; n++)
{
OLED_RAM[m][n] = fill_Data;
}
}
OLED_RefreshRAM();
}
/**************************************************************
Prototype : void OLED_FullyClear(void)
Parameters : none
return : none
Description : 全屏清除
***************************************************************/
void OLED_FullyClear(void)
{
OLED_FullyFill(RESET_PIXEL);
}
/**************************************************************
Prototype : void OLED_GetPixel(int16_t x, int16_t y)
Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);
return : PixelStatus 像素点状态 SET_PIXEL = 1, RESET_PIXEL = 0
Description : 获得坐标像素点数据（对于0.96寸的屏幕来说，没啥用）
***************************************************************/
PixelStatus OLED_GetPixel(int16_t x, int16_t y)
{
if (OLED_RAM[y / 8][x] >> (y % 8) & 0x01)
return SET_PIXEL;
return RESET_PIXEL;
}
/**************************************************************
Prototype : void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch,
unsigned char s, unsigned char TextSize)
Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);
*ch -- 要显示的数字;
s----- 数字的位数
TextSize -- 字符大小(1:6*8 ; 2:8*16)
return : none
Description : 显示codetab.h中的ASCII字符,有6*8和8*16可选择
***************************************************************/
void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch, unsigned char s, unsigned char TextSize)
{
unsigned char c = 0, i = 0, j = 0;
switch (TextSize)
{
case 1:
{
while (s--)
{
c = (ch[j] + 16);
if (x > 126)
{
x = 0;
y++;
}
OLED_SetPos(x, y);
for (i = 0; i < 6; i++)
WriteDat(F6x8[c][i]);
x += 6;
j++;
}
}
break;
case 2:
{
while (s--)
{
c = (ch[j] + 16);
if (x > 120)
{
x = 0;
y++;
}
OLED_SetPos(x, y);
for (i = 0; i < 8; i++)
WriteDat(F8X16[c * 16 + i]);
OLED_SetPos(x, y + 1);
for (i = 0; i < 8; i++)
WriteDat(F8X16[c * 16 + i + 8]);
x += 8;
j++;
}
}
break;
}
}
/**************************************************************
Prototype : void OLED_ShowCN(int16_t x, int16_t y, uint8_t* n)
Parameters : x,y -- 起始点坐标(x:0~127, y:0~7);
N[]:汉字在codetab.h中的索引（就是第几行）
return : none
Description : 显示codetab.h中的汉字,16*16点阵
***************************************************************/
void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N)
{
unsigned char wm = 0;
unsigned int adder = 32 * N;
OLED_SetPos(x, y);
for (wm = 0; wm < 16; wm++)
{
WriteDat(F16x16[adder]);
adder += 1;
}
OLED_SetPos(x, y + 1);
for (wm = 0; wm < 16; wm++)
{
WriteDat(F16x16[adder]);
adder += 1;
}
}
/**************************************************************
Prototype : void OLED_FullyToggle(void)
Parameters : none
return : none
Description : 缓冲区数据取反后刷新到GDDRAM
***************************************************************/
void OLED_FullyToggle(void)
{
for (uint16_t m = 0; m < displayHeight / 8; m++)
{
for (uint16_t n = 0; n < displayWidth; n++)
{
OLED_RAM[m][n] = ~OLED_RAM[m][n];
}
}
OLED_RefreshRAM();
}
/****************************************************************
全屏垂直偏移,0->63方向
方向垂直向上,范围0-63
方向垂直向下,范围63-0
****************************************************************/
void OLED_VerticalShift(void)
{
for (uint8_t i = 0; i < displayHeight; i++)
{
WriteCmd(0xd3); // 设置显示偏移，0->63方向
WriteCmd(i); // 偏移量
HAL_Delay(40); // 延时时间
}
}
/****************************************************************
屏幕内容水平全屏滚动播放
左 LEFT 0x27
右 RIGHT 0x26
****************************************************************/
void OLED_HorizontalShift(uint8_t direction)
{
WriteCmd(direction); // 设置滚动方向
WriteCmd(0x00); // 虚拟字节设置，默认为0x00
WriteCmd(0x00); // 设置开始页地址
WriteCmd(0x05); // 设置每个滚动步骤之间的时间间隔的帧频
WriteCmd(0x07); // 设置结束页地址
WriteCmd(0x00); // 虚拟字节设置，默认为0x00
WriteCmd(0xff); // 虚拟字节设置，默认为0xff
WriteCmd(0x2f); // 开启滚动-0x2f，禁用滚动-0x2e，禁用需要重写数据
}
/****************************************************************
屏幕内容垂直水平全屏滚动播放
上 UP 0x29
下 DOWN 0x2A
****************************************************************/
void OLED_VerticalAndHorizontalShift(uint8_t direction)
{
WriteCmd(direction); // 设置滚动方向
WriteCmd(0x00); // 虚拟字节设置，默认为0x00
WriteCmd(0x00); // 设置开始页地址
WriteCmd(0x05); // 设置每个滚动步骤之间的时间间隔的帧频
WriteCmd(0x07); // 设置结束页地址
WriteCmd(0x01); // 垂直滚动偏移量
WriteCmd(0x2f); // 开启滚动-0x2f，禁用滚动-0x2e，禁用需要重写数据
}
/****************************************************************
屏幕内容取反显示
开 ON 0xA7
关 OFF 0xA6 默认此模式，设置像素点亮
****************************************************************/
void OLED_DisplayMode(uint8_t mode)
{
WriteCmd(mode);
}
/****************************************************************
屏幕亮度调节
intensity 0-255
默认为0x7f
****************************************************************/
void OLED_IntensityControl(uint8_t intensity)
{
WriteCmd(0x81);
WriteCmd(intensity);
}
void OLED_DrawBMP(unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, unsigned char BMP[]) // X0是图像的起始位置，y0是图像的起始行，X1是图像的宽度，Y1是图像的显示高度1~8；
{
unsigned int j = 0;
unsigned char x, y;
if (y1 % 8 == 0)
y = y1 / 8;
else
y = y1 / 8 + 1;
for (y = y0; y < y1; y++)
{
OLED_SetPos(x0, y);
for (x = x0; x < x1; x++)
{
WriteDat(BMP[j++]);
}
}
}
/************************************************************
Prototype : void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch,
unsigned char s, unsigned char TextSize)
Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);
*ch -- 要显示的ASCII字符,可以直接传递字符串;
TextSize -- 字符大小(1:6*8 ; 2:8*16)
return : none
Description : 显示codetab.h中的ASCII字符,有6*8和8*16可选择
***********************************************************/
void OLED_ShowStr(unsigned char x, unsigned char y, unsigned char *ch, unsigned char TextSize)
{
unsigned char c = 0, i = 0, j = 0;
switch (TextSize)
{
case 1:
{
while (ch[j] != '\0')
{
c = ch[j] - 32;
if (x > 126)
{
x = 0;
y++;
}
OLED_SetPos(x, y);
for (i = 0; i < 6; i++)
WriteDat(F6x8[c][i]);
x += 6;
j++;
}
}
break;
case 2:
{
while (ch[j] != '\0')
{
c = ch[j] - 32;
if (x > 120)
{
x = 0;
y++;
}
OLED_SetPos(x, y);
for (i = 0; i < 8; i++)
WriteDat(F8X16[c * 16 + i]);
OLED_SetPos(x, y + 1);
for (i = 0; i < 8; i++)
WriteDat(F8X16[c * 16 + i + 8]);
x += 8;
j++;
}
}
break;
}
}设计字模文件使用 PCtoLCD2002 软件
配置如下
字库文件
codetap.h
c
/***************************16*16的点阵字体取模方式：共阴------列行式------逆向输出*********/
const unsigned char F16x16[] =
{
0x40,0x40,0x42,0xCC,0x00,0x04,0xF4,0x94,0x94,0xFF,0x94,0x94,0xF4,0x04,0x00,0x00,
0x00,0x40,0x20,0x1F,0x20,0x48,0x44,0x42,0x41,0x5F,0x41,0x42,0x44,0x48,0x40,0x00,//速0
0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00,
0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00,//度1
0x40,0x40,0x42,0x44,0x58,0xC0,0x40,0x7F,0x40,0xC0,0x50,0x48,0x46,0x40,0x40,0x00,
0x80,0x80,0x40,0x20,0x18,0x07,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x78,0x00,//光2
0x00,0xFE,0x42,0x42,0x42,0xFE,0x00,0x42,0xA2,0x9E,0x82,0xA2,0xC2,0xBE,0x00,0x00,
0x80,0x6F,0x08,0x08,0x28,0xCF,0x00,0x00,0x2F,0xC8,0x08,0x08,0x28,0xCF,0x00,0x00,//照3
0x10,0x60,0x02,0x8C,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,
0x04,0x04,0x7E,0x01,0x44,0x48,0x50,0x7F,0x40,0x40,0x7F,0x50,0x48,0x44,0x40,0x00,//湿4
0x10,0x60,0x02,0x8C,0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,
0x04,0x04,0x7E,0x01,0x40,0x7E,0x42,0x42,0x7E,0x42,0x7E,0x42,0x42,0x7E,0x40,0x00,//温5
0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00,
0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00,//度6
};
/************************************6*8的点阵************************************/
const unsigned char F6x8[][6] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};