Arduino - Keypad 键盘

蔚蓝慕2024-06-29 17:32

Arduino - Keypad

Arduino - Keypad

The keypad is widely used in many devices such as door lock, ATM, calculator...

键盘广泛应用于门锁、ATM、计算器等多种设备中。

In this tutorial, we will learn:

在本教程中，我们将学习：

  • How to use keypad 3x4 and keypad 4x4 with Arduino.
    如何将键盘 3x4 和键盘 4x4 与 Arduino 一起使用。
  • How to read value from keypad 3x4 and keypad 4x4 with Arduino.
    如何使用 Arduino 从键盘 3x4 和键盘 4x4 读取值。
  • How to verify the password inputted from keypad
    如何验证从键盘输入的密码

About Keypad 关于键盘

The keypad is a set of buttons arranged in rows and columns (called matrix). Each button is called key

键盘是一组按行和列排列的按钮（称为矩阵）。每个按钮都称为键

Keypad has various types. Two popular types for DIY projects are keypad 3x4 (12 keys) and keypad 4x4 (16 keys).

键盘有多种类型。DIY 项目的两种流行类型是键盘 3x4（12 键）和键盘 4x4（16 键）。

Pinout 引脚排列

Keypad pins are divided into two groups: row and column.

键盘引脚分为两组：行和列。

Keypad 3x4 has 7 pins: 4 row-pins (R1, R2, R3, R4) and 3 column-pin (C1, C2, C3).

键盘 3x4 有 7 个引脚：4 个排引脚（R1、R2、R3、R4）和 3 列引脚（C1、C2、C3）。

Keypad 4x4 has 8 pins: 4 row-pins (R1, R2, R3, R4) and 4 column-pin (C1, C2, C3, C4).

键盘 4x4 有 8 个引脚：4 个排引脚（R1、R2、R3、R4）和 4 列引脚（C1、C2、C3、C4）。

How It Works 它是如何工作的

This section is the in-depth knowledge. DON'T worry if you don't understand. Ignore this section if it overloads you, and come back in another day. Keep reading the next sections.

本节是深入的知识。如果您不明白，请不要担心。如果它使您超负荷，请忽略此部分，并在另一天再回来。继续阅读下一节。

The process of detecting the key pressing is called scanning keypad.

检测按键的过程称为扫描键盘。

It is called "scanning" because it checks one key by one key.

它被称为"扫描"，因为它逐个键检查一个键。

Row-pins are connected to Arduino's output pins

Row-pin连接到Arduino的输出引脚

Column pins are connected to Arduino's input pins (INPUT_PULLUP, in this state, the value of the input pin is HIGH if the key is not pressed).

列引脚连接到Arduino的输入引脚（INPUT_PULLUP，在此状态下，如果未按下该键，则输入引脚的值为HIGH）。

For each row: 对于每一行：

  • Sets all row-pins is HIGH .
    将所有行引脚设置为高电平。
  • Sets only the current row-pin to LOW .
    仅将当前行引脚设置为低电平。
  • Reads the state of each column.
    读取每列的状态。
    • If a column-pin is HIGH ⇒ key at (row, column) is NOT pressed.
      如果列引脚为高电平，则不按下 （行、列） 处⇒键。
    • If a column-pin is LOW ⇒ key at (row, column) is pressed.
      如果列引脚为低电平，则按下 （行、列） 处⇒键。
  • Repeats the above process for the next row-pins.
    对下一个行引脚重复上述过程。

※ NOTE THAT: ※ 注意事项：

The above is one of the methods to scan keypad. We can invert all HIGH to LOW and all LOW to HIGH to scan keypad.

以上是扫描键盘的方法之一。我们可以将所有高电平反转为低电平，将所有低电平反转为高电平以扫描键盘。

Why does keypad is arranged and connected as a matrix? This makes the scanning process complicated. Why do not use each key as an independent button, then the state of the key is simply determined by reading the state of a button?

为什么键盘是以矩阵的形式排列和连接的？这使得扫描过程变得复杂。为什么不把每个键都当成一个独立的按钮，那么键的状态就是通过读取一个按钮的状态来确定的呢？

⇒ As we know, an independent button requires one Arduino's pin and GND . Let's take keypad 4x4 as an example. If we each key as an independent button, it requires 16 Arduino pin for 16 keys plus GND pin. If we arranged a connected key in matrix form, we just need to use 8 Arduino's pin, so we can save Arduino's pin. In short, the answer is: to save the Arduino pins.

⇒ 众所周知，一个独立的按钮需要一个Arduino的引脚和GND。让我们以键盘 4x4 为例。如果我们每个按键作为一个独立的按钮，它需要 16 个 Arduino 引脚用于 16 个按键加上 GND 引脚。如果我们以矩阵形式排列一个连接的密钥，我们只需要使用 8 个 Arduino 的引脚，这样我们就可以保存 Arduino 的引脚。简而言之，答案是：保存Arduino引脚。

Wiring Diagram 接线图

This image is created using Fritzing. Click to enlarge image

此图像是使用 Fritzing 创建的。点击放大图片

How To Program For Keypad 如何为键盘编程

Thanks to Keypad library, using keypad with Arduino is a piece of cake, no matter whether you understand how the keypad works or not.

多亏了键盘库，无论您是否了解键盘的工作原理，使用带有 Arduino 的键盘都是小菜一碟。

Arduino Code Arduino代码

Keypad 3x4 键盘 3x4

#include <Keypad.h>

const int ROW_NUM = 4; //four rows
const int COLUMN_NUM = 3; //three columns

char keys[ROW_NUM][COLUMN_NUM] = {
  {'1','2','3'},
  {'4','5','6'},
  {'7','8','9'},
  {'*','0','#'}
};

byte pin_rows[ROW_NUM] = {9, 8, 7, 6}; //connect to the row pinouts of the keypad
byte pin_column[COLUMN_NUM] = {5, 4, 3}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), pin_rows, pin_column, ROW_NUM, COLUMN_NUM );

void setup(){
  Serial.begin(9600);
}

void loop(){
  char key = keypad.getKey();

  if (key){
    Serial.println(key);
  }
}

Keypad 4x4 键盘 4x4

#include <Keypad.h>

const int ROW_NUM = 4; //four rows
const int COLUMN_NUM = 4; //four columns

char keys[ROW_NUM][COLUMN_NUM] = {
  {'1','2','3', 'A'},
  {'4','5','6', 'B'},
  {'7','8','9', 'C'},
  {'*','0','#', 'D'}
};

byte pin_rows[ROW_NUM] = {9, 8, 7, 6}; //connect to the row pinouts of the keypad
byte pin_column[COLUMN_NUM] = {5, 4, 3, 2}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), pin_rows, pin_column, ROW_NUM, COLUMN_NUM );

void setup(){
  Serial.begin(9600);
}

void loop(){
  char key = keypad.getKey();

  if (key){
    Serial.println(key);
  }
}

Quick Steps 快速步骤

  • Navigate to the Libraries icon on the left bar of the Arduino IDE.
    导航到 Arduino IDE 左侧栏上的 Libraries 图标。
  • Search "keypad" , then find the keypad library by Mark Stanley, Alexander Brevig
    搜索"键盘"，然后找到 Mark Stanley、Alexander Brevig 的键盘库
  • Click Install button to install keypad library.
    单击"安装"按钮安装键盘库。
  • Copy the above code and open with Arduino IDE
    复制上面的代码并使用Arduino IDE打开
  • Click Upload button on Arduino IDE to upload code to Arduino
    单击Arduino IDE上的"上传"按钮，将代码上传到Arduino
  • Open Serial Monitor 开放式串行监视器
  • Press some keys on keypad
    按键盘上的一些键
  • See the result in Serial Monitor
    在串行监视器中查看结果

Keypad and Password 键盘和密码

A popular application of keypad is the password input. In this application, we specify two special keys:

键盘的一个流行应用是密码输入。在此应用程序中，我们指定了两个特殊键：

  • A key to start/re-start the password input. For example, key ""
    用于启动/重新启动密码输入的密钥。例如，键"    "
  • A key to terminate the password input. For example, key "#"
    用于终止密码输入的键。例如，键"#"

The password will be a string that contains the remaining keys, except for two selected special keys.

密码将是一个字符串，其中包含其余密钥，但两个选定的特殊密钥除外。

When a key is pressed.

按下某个键时。

  • If the key is NOT neither "" nor "#", append the key to the user's input password string.
    如果密钥既不是"    "也不是"#"，则将密钥追加到用户的输入密码字符串中。
  • If the key is "#", compare the user's input password string with the password to determine the input password is correct or not, and then clear the user's input password string
    如果密钥为"#"，则将用户的输入密码字符串与密码进行比较，以确定输入密码是否正确，然后清除用户的输入密码字符串
  • If the key is "", clear the user's input password string
    如果密钥为"    "，请清除用户的输入密码字符串

Keypad - Password Code 键盘 - 密码代码

/*

 * Created by ArduinoGetStarted.com
   *
 * This example code is in the public domain
   *
 * Tutorial page: https://arduinogetstarted.com/tutorials/arduino-keypad
   */

#include <Keypad.h>

const int ROW_NUM = 4; //four rows
const int COLUMN_NUM = 3; //three columns

char keys[ROW_NUM][COLUMN_NUM] = {
  {'1','2','3'},
  {'4','5','6'},
  {'7','8','9'},
  {'*','0','#'}
};

byte pin_rows[ROW_NUM] = {9, 8, 7, 6}; //connect to the row pinouts of the keypad
byte pin_column[COLUMN_NUM] = {5, 4, 3}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), pin_rows, pin_column, ROW_NUM, COLUMN_NUM );

const String password = "1234"; // change your password here
String input_password;

void setup(){
  Serial.begin(9600);
  input_password.reserve(32); // maximum input characters is 33, change if needed
}

void loop(){
  char key = keypad.getKey();

  if (key){
    Serial.println(key);

    if(key == '*') {
      input_password = ""; // clear input password
    } else if(key == '#') {
      if(password == input_password) {
        Serial.println("password is correct");
        // DO YOUR WORK HERE
        
      } else {
        Serial.println("password is incorrect, try again");
      }

      input_password = ""; // clear input password
    } else {
      input_password += key; // append new character to input password string
    }
  }
}
  • Run above code 运行上述代码
  • Open Serial Monitor 开放式串行监视器
  • Press "123456" keys and press "#"
    按"123456"键，按"#"
  • Press "1234" keys and press "#"
    按"1234"键，按"#"
  • See the result on Serial Monitor
    在串行监视器上查看结果

Video Tutorial 视频教程

We are considering to make the video tutorials. If you think the video tutorials are essential, please subscribe to our YouTube channel to give us motivation for making the videos.

我们正在考虑制作视频教程。如果您认为视频教程是必不可少的，请订阅我们的 YouTube 频道，为我们制作视频提供动力。

Additional Knowledge 其他知识

Challenge Yourself 挑战自我

  • Display the pressed key of the keypad on LCD. Hint: Refer to Arduino - LCD
    在 LCD 上显示键盘的按键。提示：请参阅Arduino - LCD
  • Make a door lock with password protection using the keypad.
    使用键盘制作带有密码保护的门锁。
相关推荐
阿昊真人3 天前
Arduino HC05 蓝牙模块 实现手机与单片机下发通讯(遥控)
单片机·arduino
Frank学习路上10 天前
【Arduino】ESP8266获取NTP时间及连接MQTT实现远程控制示例
c++·mqtt·arduino·esp8266
玖玖玖梦23 天前
使用ESP32通过Arduino IDE点亮1.8寸TFT显示屏
单片机·arduino·tft显示屏
zhangrelay24 天前
Arduinio mega 2560习题-填空、选择和判断-7-键盘和LCD显示
arduino
qdprobot1 个月前
ESP32桌面天气摆件加文心一言AI大模型对话Mixly图形化编程STEAM创客教育
网络·人工智能·百度·文心一言·arduino
tundra381 个月前
esp8266外控LED灯颜色调节亮度
arduino
ice小游1 个月前
使用ATmega328p芯片制作Arduino Uno R3开发板
嵌入式硬件·arduino·开发板·芯片·atmega328p
e调布鲁斯2 个月前
esp32cam+Arduino IDE在编译时提示找不到 esp_camera.h 的解决办法
esp32·arduino
ourkix2 个月前
arduino uno R3更换328pb-au芯片，烧录bootloader
嵌入式硬件·arduino
IT永勇2 个月前
基于Arduino的LED亮灭按键控制
单片机·嵌入式硬件·arduino·电子设计·按键检测
热门推荐
01〔AI 绘画〕Stable Diffusion 之 解决绘制多人或面部很小的人物时面部崩坏问题 篇02ARM学习（31）编译器对overlay方式的支持03玄机平台应急响应—webshell查杀04DisplayPort AltMode On Type-c协议_Ver2.0(学习笔记)05校验 GPT-4 真实性的三个经典问题：快速区分 GPT-3.5 与 GPT-4，并提供免费测试网站06Docker 夺命连环 15 问076个主流的工业3D管道设计软件08基于大语言模型（LLM）的合成数据生成、策展和评估的综述09(欧拉)openEuler系统添加网卡文件配置流程、(欧拉)openEuler系统手动配置ipv6地址流程、(欧拉)openEuler系统网络管理说明10红米手机使用google play