【STM32+HAL库】---- 硬件IIC驱动0.96OLED

硬件开发板:STM32G0B1RET6
软件平台:cubemax+keil+VScode

内容原著声明

代码借鉴学习于以下文章:
STM32 使用硬件IIC驱动0.96寸4针IOLED显示器(HAL库)

1 新建cubemax工程

1.1 配置系统时钟RCC

1.2 配置引脚

1.3 导出工程

略...

2 代码

2.1 OLED_IIC_Config.h

c 复制代码
/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.h
 * @author zxr
 * @brief IIC和OLED基础配置头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef OLED_IIC_CONFIG_H
#define OLED_IIC_CONFIG_H

#include "main.h"
#include "stm32g0xx_hal.h"

#define  OLED_ADDRESS 		0x78	//OLED地址  默认0x78

//OLED命令控制宏
#define  	LEFT 			0x27
#define  	RIGHT 			0x26
#define  	UP 			0X29
#define  	DOWM			0x2A
#define  	ON			0xA7
#define  	OFF			0xA6


#define    	SCREEN_PAGE_NUM		(8)     //屏幕页数
#define    	SCREEN_PAGEDATA_NUM	(128)   //每页的数据个数
#define		SCREEN_COLUMN		(128)   //列数
#define  	SCREEN_ROW		(64)    //行数


void WriteCmd(unsigned char cmd);		//写命令
void WriteDat(unsigned char dat);		//写数据
void OLED_ON(void);				//开启OLED
void OLED_OFF(void);				//休眠OLED
void OLED_CLS(void);				//OLED清屏函数
void OLED_Init(void);				//OLED初始化函数
void OLED_RefreshRAM(void);			//更新数据缓冲区
void OLED_ClearRAM(void);			//清除数据缓冲区
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel);	//设置坐标像素点数据
void OLED_DisplayMode(unsigned char mode);	//屏幕内容取反显示
void OLED_IntensityControl(unsigned char intensity);//屏幕亮度调节
void OLED_Shift(unsigned char shift_num);	//全屏内容偏移指定距离
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction);	//屏幕内容水平方向滚动播放

#endif  /*OLED_IIC_CONFIG_H*/

2.2 OLED_IIC_Config.c

c 复制代码
/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.c
 * @author zxr
 * @brief IIC初始化配置和OLED屏幕的底层驱动
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#include "OLED_IIC_Config.h"
#include "i2c.h"
#include "MyDelay.h"

unsigned char  ScreenBuffer[SCREEN_PAGE_NUM][SCREEN_COLUMN];//定义屏幕的存储空间



/**
* @brief  向OLED寄存器地址写一个byte的数据
* @param  addr:寄存器地址
* @param  data:要写入的数据
* @retval 无
*/
void I2C_WriteByte(uint8_t addr, uint8_t data)
{
	extern I2C_HandleTypeDef hi2c1;
	HAL_I2C_Mem_Write(&hi2c1, OLED_ADDRESS, addr, I2C_MEMADD_SIZE_8BIT, &data, 1, 10);
}

/**
 * ************************************************************************
 * @brief 写命令函数
 * @param[in] cmd  写入的命令
 * ************************************************************************
 */
void WriteCmd(unsigned char cmd)
{
	I2C_WriteByte(0x00, cmd);
}

/**
 * ************************************************************************
 * @brief 写数据函数
 * @param[in] dat  写入的数据
 * ************************************************************************
 */
void WriteDat(unsigned char dat)
{
	I2C_WriteByte(0x40, dat);
}

/**
 * ************************************************************************
 * @brief 开启OLED
 * ************************************************************************
 */
void OLED_ON(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X14);  //开启电荷泵
	WriteCmd(0XAF);  //OLED唤醒
}

/**
 * ************************************************************************
 * @brief 休眠OLED
 * ************************************************************************
 */
void OLED_OFF(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X10);  //关闭电荷泵
	WriteCmd(0XAE);  //OLED休眠
}

/**
 * ************************************************************************
 * @brief OLED清屏函数
 * ************************************************************************
 */
void OLED_CLS(void)//清屏
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		WriteCmd(0xb0+m);	//page0-page1
		WriteCmd(0x00);		//low column start address
		WriteCmd(0x10);		//high column start address
		for(n=0;n<128;n++)
		{
			WriteDat(0x00);
		}
	}
}

/**
 * ************************************************************************
 * @brief OLED初始化函数
 * ************************************************************************
 */
void OLED_Init(void)
{
	WriteCmd(0xAE); //显示关闭
	WriteCmd(0x20);	//设置内存寻址模式
	WriteCmd(0x10);	//00,水平寻址模式;01,垂直寻址模式;10,页寻址模式(复位);11,无效
	WriteCmd(0xb0);	//设置页寻址模式的页起始地址,0-7
	WriteCmd(0xc8);	//设置COM输出扫描方向
	WriteCmd(0x00); //-设置低列地址
	WriteCmd(0x10); //-设置高列地址
	WriteCmd(0x40); //-设置起始行地址
	WriteCmd(0x81); //设置对比度控制寄存器
	WriteCmd(0xff); //亮度调节 0x00~0xff
	WriteCmd(0xa1); //设置段重新映射0到127
	WriteCmd(0xa6); //设置正常显示
	WriteCmd(0xa8); //设置复用比例(1到64)
	WriteCmd(0x3F); //
	WriteCmd(0xa4); //0xa4,输出遵循RAM内容;0xa5,输出忽略RAM内容
	WriteCmd(0xd3); //设置显示偏移
	WriteCmd(0x00); //不偏移
	WriteCmd(0xd5); //--set display clock divide ratio/oscillator frequency
	WriteCmd(0xf0); //--set divide ratio
	WriteCmd(0xd9); //--set pre-charge period
	WriteCmd(0x22); //
	WriteCmd(0xda); //--set com pins hardware configuration
	WriteCmd(0x12);
	WriteCmd(0xdb); //--set vcomh
	WriteCmd(0x20); //0x20,0.77xVcc
	WriteCmd(0x8d); //设置DC-DC使能
	WriteCmd(0x14); //
	WriteCmd(0xaf); //--turn on oled panel
	OLED_CLS();
}

/**
 * ************************************************************************
 * @brief 更新数据缓冲区
 * ************************************************************************
 */
void OLED_RefreshRAM(void)
{
	// 页寻址模式填充
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		WriteCmd(0xb0+m);		//设置页地址b0~b7
		WriteCmd(0x00);			//设置显示位置---列低地址00-0f
		WriteCmd(0x10);			//设置显示位置---列高地址10-1f
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			WriteDat(ScreenBuffer[m][n]);
		}
	} 
}

/**
 * ************************************************************************
 * @brief 清除数据缓冲区
 * ************************************************************************
 */
void OLED_ClearRAM(void)
{
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			ScreenBuffer[m][n] = 0x00;
		}
	}
}

/**
 * ************************************************************************
 * @brief 设置坐标像素点数据
 * 
 * @param[in] x  			起始点横坐标(x:0~127)
 * @param[in] y  			起始点纵坐标(y:0~63)
 * @param[in] set_pixel  	该点的数据  SET_PIXEL = 1, RESET_PIXEL = 0
 * 
 * ************************************************************************
 */
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		if(set_pixel){
				ScreenBuffer[y/8][x] |= (0x01 << (y%8));
		}  
		else{
				ScreenBuffer[y/8][x] &= ~(0x01 << (y%8));
		}
	}
}

/**
 * ************************************************************************
 * @brief 屏幕内容取反显示
 * 
 * @param[in] mode  开关
 * 					开	ON	0xA7	点亮全屏
 *  				关	OFF	0xA6	默认此模式,设置像素点亮
 * 
 * ************************************************************************
 */
void OLED_DisplayMode(unsigned char mode)
{
	WriteCmd(mode);
}

/**
 * ************************************************************************
 * @brief 屏幕亮度调节
 * 
 * @param[in] intensity  亮度大小(0~255),默认为0x7f
 * 
 * ************************************************************************
 */
void OLED_IntensityControl(unsigned char intensity)
{
	WriteCmd(0x81);
	WriteCmd(intensity);
}

/**
 * ************************************************************************
 * @brief 全屏内容偏移指定距离
 * 
 * @param[in] shift_num  偏移距离(0~63)
 * 
 * ************************************************************************
 */
void OLED_Shift(unsigned char shift_num)
{
	for(unsigned char i = 0; i < shift_num; i++)
		{
			WriteCmd(0xd3);//设置显示偏移,垂直向上偏移
			WriteCmd(i);//偏移量
			HAL_Delay(10);//延时时间
		}
}


/**
 * ************************************************************************
 * @brief 屏幕内容水平方向滚动播放
 * 
 * @param[in] start_page  	开始页数	(0~7)
 * @param[in] end_page  	结束页数	(0~7)
 * @param[in] direction  	滚动方向
 * 								左		LEFT	0x27
 * 								右		RIGHT	0x26
 * @note 在开始页数和结束页数之间的内容才会滚动播放,且写命令顺序不得改变
 * ************************************************************************
 */
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction)
{
	WriteCmd(0x2e);  //关闭滚动

	WriteCmd(direction);//设置滚动方向
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(start_page);//设置开始页地址
	WriteCmd(0x05);//设置每个滚动步骤之间的时间间隔的帧频
	WriteCmd(end_page);//设置结束页地址
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(0xff);//虚拟字节设置,默认为0xff

	WriteCmd(0x2f);//开启滚动-0x2f,禁用滚动-0x2e,禁用需要重写数据
}

2.3 OLED_Function.h

c 复制代码
/**
 * ************************************************************************
 * 
 * @file OLED_Function.h
 * @author zxr
 * @brief OLED功能函数驱动头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef _OLED_FUNCTION_H_
#define _OLED_FUNCTION_H_

#include "OLED_IIC_Config.h"

//字符串显示函数
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize);
//中文汉字显示函数
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch);
//BMP图片显示函数
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[]);

#endif /* _OLED_FUNCTION_H_ */

2.4 OLED_Function.c

c 复制代码
#include "OLED_Function.h"
#include "OLED_Front.h"

/**
 * ************************************************************************
 * @brief 字符串显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	字符串(通过双引号引入)
 * @param[in] TextSize  字符大小(1:6*8 ;2:8*16)
 * 
 * ************************************************************************
 */
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) 
	{
		int32_t c = 0;
		unsigned char j = 0;
	
		switch(TextSize)
		{
			case 1:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 125 || (127-x < 6))//一行最大显示字符数:21字节显示,多出两列,不显示 || 剩余列小于6不能显示完整字符,换行显示
					{
						x = 0;
						y += 8;//换行显示
						if(63 - y < 8)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 6; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							OLED_SetPixel(x+m, y+n, (F6x8[c][m] >> n) & 0x01);
						}
					}
					x += 6;
					j++;
				}
			}break;
			case 2:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 127 || (127-x < 8))//16字节显示 || 剩余列小于8不能显示完整字符,换行显示
					{
						x = 0;
						y += 16;//换行显示
						if(63 - y < 16)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							for(unsigned char i = 0; i < 8; i++)
							{
								OLED_SetPixel(x+n, y+i+m*8, (F8X16[c][n+m*8] >> i) & 0x01);
							}
						}	
					}
					x += 8;
					j++;
				}
			}break;
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief 中文汉字显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	汉字字模库索引
 * 
 * @example OLED_ShowCN(0,0,"字");
 * ************************************************************************
 */
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch)
{
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		int32_t  len = 0,offset = sizeof(F16x16_CN[0].index);
		
		while(ch[len] != '\0')
		{
			if(x >= 127 || (127-x < 16))//8个汉字显示||剩余列小于16不能显示完整字符,换行显示
			{
				x = 0;
				y += 16;
				if(63 - y < 16)	// 不足以显示一行时不显示
					break;
			}
					
			//需要处理输入数据大于显示数据的问题
			for(unsigned char i = 0; i < sizeof(F16x16_CN)/sizeof(GB2312_CN); i++)
			{
				if(((F16x16_CN[i].index[0] == ch[len]) && (F16x16_CN[i].index[1] == ch[len+1]))){
						for(unsigned char m = 0; m < 2; m++)	//页
						{
							for(unsigned char n = 0; n < 16; n++) // 列
							{
								for(unsigned char j = 0; j < 8; j++)	// 行
								{
									OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
								}
							}
						}			
						x += 16;
						len += offset;
						break;
				}
				else if(F16x16_CN[i].index[0] == ch[len] && ch[len] == 0x20){
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 16; n++)
						{
							for(unsigned char j = 0; j < 8; j++)
							{
								OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
							}								
						}	
					}			
					x += 16; 
					len++;
					break;
				}
			}
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief BMP图片显示函数
 * 
 * @param[in] x0  	起始点横坐标(0~127)
 * @param[in] y0  	起始点纵坐标(0~63)
 * @param[in] L  	BMP图片宽度
 * @param[in] H  	BMP图片高度
 * @param[in] BMP  	图片取模地址
 * 
 * @example OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
 * ************************************************************************
 */
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[])
{
	if (x0 >= 0 && x0 < SCREEN_COLUMN && x0+L <= SCREEN_ROW &&\
		y0 >= 0 && y0 < SCREEN_COLUMN && y0+H <= SCREEN_ROW) {
		
		unsigned char *p = (unsigned char *)BMP;
		for(signed short int y = y0; y < y0+H; y+=8)
		{
			for(signed short int x = x0; x < x0+L; x++)
			{
				for(signed short int i = 0; i < 8; i++)
				{
					OLED_SetPixel(x, y+i, ((*p) >> i) & 0x01);
				}
				p++;
			}
		}
	}

	OLED_RefreshRAM();
}

2.5 OLED_Front.h

点击查看代码

c 复制代码
#ifndef _OLED_FRONT_H_
#define _OLED_FRONT_H_


/**
 * ************************************************************************
 * @brief 大小6*8的字符取模库
 * ************************************************************************
 */
static unsigned char F6x8[][6] =
{
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
	0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
	0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
	0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
	0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
	0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
	0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
	0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
	0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
	0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
	0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
	0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
	0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
	0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
	0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
	0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
	0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
	0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
	0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
	0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
	0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
	0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
	0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
	0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
	0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
	0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
	0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
	0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
	0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
	0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
	0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
	0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
	0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
	0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
	0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
	0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
	0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
	0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
	0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
	0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
	0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
	0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
	0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
	0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
	0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
	0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
	0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
	0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
	0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
	0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
	0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
	0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
	0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
	0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
	0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
	0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
	0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
	0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
	0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
	0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
	0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
	0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
	0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
	0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
	0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
	0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
	0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
	0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
	0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
	0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
	0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
	0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
	0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
	0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
	0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
	0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
	0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
	0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
	0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
	0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
	0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
	0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
	0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
	0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};


/**
 * ************************************************************************
 * @brief 大小为8*16的字符取模库
 * ************************************************************************
 */
static unsigned char F8X16[][16]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};





/**
 * ************************************************************************
 * @brief 汉字字模数据结构
 * index[] 汉字内码索引。使用UTF-8编码格式时为index[3];使用GB2312或GBK编码格式时为index[2];
 * encoder	点阵码数据
 * ************************************************************************
 */
typedef struct {     
    char index[2];                                             
    unsigned char encoder[32];                                             
}GB2312_CN;

/**
 * ************************************************************************
 * @brief GB2312_CN 16*16汉字字模库
 * 取模设置:共阴、列行式、逆向输出
 * 数组格式参照代码所示
 * ************************************************************************
 */
static GB2312_CN F16x16_CN[] = {

	{"嵌",
		0x80,0x80,0xEE,0x88,0x88,0x88,0xE8,0x8F,0x08,0x88,0x78,0x48,0x4E,0x40,0xC0,0x00,
		0x00,0x00,0x7F,0x24,0x24,0x24,0x7F,0x00,0x81,0x40,0x30,0x0F,0x30,0x41,0x80,0x00,
	},

	{"入",
		0x00,0x00,0x00,0x00,0x00,0x01,0xE2,0x1C,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x03,0x0C,0x30,0x40,0x80,0x80,0x00,
	},

	{"式",
		0x10,0x10,0x90,0x90,0x90,0x90,0x90,0x10,0x10,0xFF,0x10,0x10,0x11,0x16,0x10,0x00,
		0x00,0x20,0x60,0x20,0x3F,0x10,0x10,0x10,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00,
	},

	{"学",
		0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,
		0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,
	},

	{"习",
		0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
		0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,
	},

};




/**
 * ************************************************************************
 * @brief astronaut_x 太空人52*48系列(共10张)  图像取模 纵向取模,字节倒序
 * ************************************************************************
 */
static unsigned char astronaut_0[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xA0,0x60,0x60,0x60,0xA0,0xC0,0x40,0x40,0x80,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x10,0x00,0x00,0x30,0x0C,0x02,0x81,
	0xE0,0xF0,0xF8,0xFC,0xFC,0xFC,0xFC,0xFE,0xFC,0xFC,0xFC,0xF8,0xF8,0xF1,0xE2,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x40,0x00,0x0F,
	0x60,0x80,0x00,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x60,0x0F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x02,0x08,0x10,0x42,0x84,0x04,0x09,0x13,0x17,0x17,0x0F,0x1F,0x6F,
	0x1F,0x1F,0x1F,0x0F,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x44,0x48,0x90,0x62,0x98,
	0x00,0xE4,0x08,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x18,0x40,0x04,0x28,0x20,0x98,0xA4,0xA4,0x18,0x40,0x00,0x02,
	0x00,0x0A,0x04,0x03,0x0C,0xC0,0x00,0x40,0x80,0x01,0x04,0x00,0x00,0x00,0x00,0x00,
	0x00,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x08,0x10,
	0x42,0x00,0x08,0x38,0x48,0x05,0x24,0x1E,0x09,0x00,0x04,0x00,0x10,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	
};
static unsigned char astronaut_1[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,
	0xE4,0x60,0x20,0x20,0x20,0x00,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
	0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x8C,0xC2,0xE1,
	0xE3,0xF1,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x01,0x02,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFC,0x00,0x00,0xB0,0x70,0x4F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x87,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x3F,
	0x9F,0x1F,0x1F,0x0B,0x00,0x04,0x03,0x00,0x00,0x04,0x00,0x08,0x01,0x40,0x22,0x14,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x40,
	0x80,0x00,0x00,0x00,0x01,0x09,0x26,0xB0,0x20,0xC0,0xA0,0x80,0x00,0x41,0x08,0x05,
	0x00,0x08,0x05,0x03,0x08,0x80,0x00,0x00,0x00,0x01,0x04,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x00,0x80,0x08,0x08,0x29,0x26,0x0E,0x00,0x09,0x00,0x05,0x00,0x00,0x02,0x84,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_2[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x00,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB0,0x9C,0xCE,0xC7,
	0xC1,0xC1,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,
	0x30,0x81,0x02,0x04,0x10,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0xF0,0x00,0x00,
	0x00,0x00,0x00,0x80,0xEC,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x7F,0x93,0x10,0x08,0x04,0x04,0x03,0x00,0x00,0x10,0x21,0x40,0x82,0x44,0x28,0x10,
	0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x07,0x1C,0x70,0xA0,0xE0,0x80,0x02,0x92,0x12,0x00,0x00,
	0x10,0x09,0x06,0x03,0x08,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x01,
	0x04,0x00,0x08,0x08,0x2F,0x22,0x1E,0x00,0x09,0x00,0x05,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_3[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x8E,0x81,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xC4,
	0x30,0xC0,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xE0,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE2,0x2F,0x20,0x20,0x40,0x00,0x00,0x01,0x04,0x10,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x10,0xF0,0x10,0x08,0x04,0x04,0x03,0x20,0x42,0x06,0x0C,0x38,0xE0,0xC1,0x02,0x04,
	0x90,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x10,0x20,0x18,0xA4,0xA4,0x18,0x01,0x06,0x08,
	0x10,0x01,0x0D,0x07,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x00,0x04,0x18,0x24,0x22,0x11,0x01,0x08,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x80,0x00,0x06,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_4[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x40,0x44,
	0x24,0x24,0x20,0x22,0x20,0x20,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xEC,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x1B,0x04,
	0x18,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,
	0x7C,0xFC,0xF8,0xF8,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE0,0x1F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x07,0x07,0x0F,0x0F,0x1F,0x10,0x10,0x10,0x10,
	0x10,0xF0,0x90,0x08,0x38,0x74,0xC2,0x81,0x00,0x00,0x00,0x00,0x01,0x04,0x08,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x02,0x02,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x08,0x20,0x18,0x00,0x00,0x00,0x02,0x04,0x10,0x60,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x16,0x38,0x70,0xF0,0x83,0x8F,0x94,0x28,0x08,
	0x08,0x14,0xC6,0x19,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x30,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x04,0x04,0x28,0x04,0x23,0x03,0x11,0x0E,0x45,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_5[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x60,0x44,0xC4,0x84,0x08,0x10,0x20,0x4C,0x80,0x00,0x00,
	0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x30,0x1C,0x1E,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x02,0x05,0x0A,0x0C,
	0x30,0xC1,0x02,0x0C,0x10,0x60,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x05,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xF0,0x4F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x0C,0x08,0x10,0x10,0x10,0x00,0x30,0xA0,
	0x30,0xD0,0x08,0x04,0x02,0x02,0x01,0x00,0x00,0x03,0x06,0x1C,0x38,0xE1,0xE2,0x9C,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
	0x00,0x00,0x00,0x03,0x18,0x60,0x07,0x3E,0x28,0xB0,0xC0,0x80,0xA0,0x10,0x08,0x00,
	0x04,0x8A,0x04,0x03,0x0C,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x24,
	0x28,0x00,0x00,0x00,0x03,0x04,0x18,0x60,0x80,0x00,0x01,0x00,0x01,0x01,0x00,0x01,
	0x02,0x04,0x08,0x38,0x48,0x47,0x26,0x1E,0x09,0x09,0x04,0x02,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_6[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x60,0xA0,0x20,0x60,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x3F,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF8,0xC0,0x00,0x00,0x10,0x20,0x80,0x40,0x40,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x30,0xC0,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x03,0x07,0x87,0x6F,0x0F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x05,0x08,0x08,0x10,0x10,0x10,0x90,0x60,
	0x30,0x10,0x10,0x18,0x48,0x14,0x42,0x01,0x09,0x20,0x42,0x84,0x48,0x30,0x40,0x00,
	0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x08,0x10,0x40,0x00,0x00,0x01,0x84,0x89,0x64,0x0C,0x92,0x21,
	0x02,0x0C,0x01,0x0A,0xC0,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x00,
	0x01,0x02,0x04,0x39,0x4A,0x3C,0x22,0x12,0x01,0x08,0x07,0x00,0x00,0x00,0x00,0x00,
	0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_7[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xE0,0x60,0x60,0x20,0xA0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x0F,0x1F,
	0x1F,0x3F,0x3F,0xBF,0x7F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,
	0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x04,0x00,0x0E,0x14,0x18,0x10,0x90,0x60,0x20,
	0x30,0x90,0xD0,0x08,0x04,0x04,0x82,0x01,0x01,0x00,0x82,0x44,0x08,0x10,0xC0,0x00,
	0x00,0x00,0x00,0x00,0x01,0x04,0x0B,0x20,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x04,0x10,0x40,0x81,0x07,0x1C,0xB0,0xF0,0x01,0x8C,0x08,0x63,0x00,
	0x00,0x01,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x01,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x02,0x00,0x04,0x00,0x18,0x24,0x20,0x12,0x01,0x09,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_8[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0xC0,
	0x24,0x20,0x20,0x20,0xA0,0xC0,0xC4,0xC4,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x06,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x07,
	0x03,0x01,0x00,0xE0,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x03,0x1F,0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0xFF,0x8F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x04,0x04,0x08,0x00,0x10,0x18,0x18,0x10,0x20,
	0x10,0x10,0x11,0x09,0x05,0x04,0x03,0x00,0x00,0x00,0x03,0x04,0x0A,0xA4,0xE8,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x0C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x04,0x20,0x40,0x23,0x18,0x20,0x80,0x80,0x0A,0x41,0x09,0x00,
	0x00,0x08,0x84,0x03,0x08,0xA0,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x81,
	0x04,0x00,0x08,0x30,0x48,0x04,0x23,0x17,0x09,0x04,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,
	
};
static unsigned char astronaut_9[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x88,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x0E,0x07,
	0x02,0xC0,0xF0,0xF8,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x02,0x04,0x10,0x20,0x80,0x00,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x0F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x7F,0x8F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x04,0x08,0x00,0x10,0x11,0x11,0x23,0x23,
	0x13,0x13,0x93,0x0B,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x45,0x0A,0x64,0xC8,0x10,
	0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x10,0x40,0x01,0x24,0x10,0x40,0x14,0xA0,0x04,0x00,0x00,0x01,
	0x02,0x88,0x04,0x07,0xB0,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x01,0x02,0x02,0x01,0x01,0x02,
	0x04,0x00,0x08,0x30,0x48,0x45,0x26,0x1A,0x01,0x08,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};



#endif

3 功能验证

首先在main.c中引入头文件

c 复制代码
/* USER CODE BEGIN Includes */
#include "OLED_IIC_Config.h"
#include "OLED_Function.h"
#include "OLED_Front.h"
/* USER CODE END Includes */

随即根据要求在main函数中添加对应功能函数即可

3.1 显示英文字符

c 复制代码
int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowStr(0,16,"OLED-TEXT",2);
}

3.2 显示中文汉字

c 复制代码
int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
}

注意 】使用时应将编译器编码选项选择为GBK系列,否则编译报错,尤其注意通过keil修改后,再用vscode打开看见有乱码时,一定检查一下编译器的编码格式是否为GBK系列

3.3 显示内容垂直偏移指定距离

c 复制代码
int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,40,"OLED-TEXT",1);
  OLED_ShowChinese(0,48,"嵌");
  OLED_ShowChinese(16,48,"入");
  OLED_ShowChinese(32,48,"式");
  OLED_Shift(20);
}

3.4 显示内容水平循环滚动

c 复制代码
int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
  OLED_HorizontalShift(0,3,RIGHT);
}

3.3 显示BMP图片

c 复制代码
int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化

  while (1)
  {
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_1);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_2);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_3);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_4);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_5);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_6);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_7);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_8);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_9);
  }
}
相关推荐
kenwblack39 分钟前
STM32 SPI读取SD卡
stm32·单片机
兰_博1 小时前
51单片机驱动1602液晶显示
单片机·嵌入式硬件·51单片机
深圳市青牛科技实业有限公司 小芋圆1 小时前
开关电源特点、分类、工作方式
前端·科技·单片机·物联网·分类·数据挖掘·新能源
我qq不是451516521 小时前
单片机优先级
单片机·嵌入式硬件
相醉为友3 小时前
在开发嵌入式系统时,尤其是处理大数时,会遇到取值范围的问题。51单片机通常没有内建大整数支持,因此我们需要采用不同的方法来解决这一问题
单片机·嵌入式硬件·51单片机
1101 11014 小时前
STM32-笔记10-手写延时函数(SysTick)
笔记·stm32·单片机
极客小张4 小时前
基于STM32的智慧农业控制系统设计:python可视化、UART、I2C、TCP/HTTP技术
python·stm32·单片机·物联网·tcp/ip·毕业设计·课程设计
wenchm4 小时前
细说STM32F407单片机通过IIC读写EEPROM 24C02
stm32·单片机·嵌入式硬件
1101 11015 小时前
STM32-笔记14-排队控制系统
笔记·stm32·嵌入式硬件
最后一个bug6 小时前
rt-linux中使用mlockall与free的差异
linux·c语言·arm开发·单片机·嵌入式硬件·算法