ubuntu 22.04安装k8s高可用集群

文章目录

1.环境准备（所有节点）
- [1.1 关闭无用服务](#1.1 关闭无用服务)
- [1.2 环境和网络](#1.2 环境和网络)
- [1.3 apt源](#1.3 apt源)
- [1.4 系统优化](#1.4 系统优化)
- [1.5 安装nfs客户端](#1.5 安装nfs客户端)
[2. 装containerd（所有节点）](#2. 装containerd（所有节点）)
[3. master的高可用方案（master上操作）](#3. master的高可用方案（master上操作）)
- [3.1 安装以及配置haproxy（3master相同）](#3.1 安装以及配置haproxy（3master相同）)
- [3.2 keepalived](#3.2 keepalived)
[4. 核心组件安装（所有节点）](#4. 核心组件安装（所有节点）)
- [4.1 kubelet、kubeadm、kubectl安装](#4.1 kubelet、kubeadm、kubectl安装)
- [4.2 提前下载镜像（所有节点）【非必要】](#4.2 提前下载镜像（所有节点）【非必要】)
- [4.2 缺少一个镜像](#4.2 缺少一个镜像)
[5. 集群初始化](#5. 集群初始化)
- [5.1 主机名](#5.1 主机名)
- [5.2 初始化](#5.2 初始化)
- - 1）master-01
  - 2）其他master
  - 3）node节点
  - [4）检查](#4）检查)
- [5.3 网络安装](#5.3 网络安装)
[6. storageclass 的安装](#6. storageclass 的安装)

1.环境准备（所有节点）

服务器规划

类型	IP 地址	主机名
Master 1	10.10.239.155	k8s-master-01
Master 2	10.10.239.156	k8s-master-02
Master 3	10.10.239.161	k8s-master-03
虚拟IP	10.10.239.150	apiserver-vip

系统信息

shell 复制代码

root@cto-gpu-pro-n01:~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.5 LTS
Release:        22.04
Codename:       jammy

1.1 关闭无用服务

关闭交换分区

shell 复制代码

# sed -i "/swap/{s/^/#/g}" /etc/fstab
# swapoff -a

关闭防火墙

shell 复制代码

root@boe:~# ufw disable
root@boe:~# ufw status
Status: inactive

1.2 环境和网络

hostname

shell 复制代码

# hostname master-01
# vim /etc/hostmame

hosts

shell 复制代码

cat >> /etc/hosts << EOF
10.10.239.155 master-01
10.10.239.156 master-02
10.10.239.157 master-03
EOF

打开路由

shell 复制代码

# cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1 
net.bridge.bridge-nf-call-iptables = 1 
net.ipv4.ip_forward = 1 
EOF
# modprobe br_netfilter 
# echo br_netfilter | tee /etc/modules-load.d/k8s.conf
# sysctl -p /etc/sysctl.d/k8s.conf

加载内核模块

shell 复制代码

#cat > /etc/modules-load.d/ipvs.conf <<EOF 
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
nf_conntrack
EOF

# systemctl restart systemd-modules-load.service

验证结果如下：

shell 复制代码

root@boe:~# lsmod | grep '^ip_vs'
ip_vs_ftp              16384  0
ip_vs_sed              16384  0
ip_vs_nq               16384  0
ip_vs_fo               16384  0
ip_vs_sh               16384  0
ip_vs_dh               16384  0
ip_vs_lblcr            16384  0
ip_vs_lblc             16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  1338
ip_vs_wlc              16384  0
ip_vs_lc               16384  0
ip_vs                 176128  1366 ip_vs_wlc,ip_vs_rr,ip_vs_dh,ip_vs_lblcr,ip_vs_sh,ip_vs_fo,ip_vs_nq,ip_vs_lblc,ip_vs_wrr,ip_vs_lc,ip_vs_sed,ip_vs_ftp

1.3 apt源

apt源的配置文件

shell 复制代码

vim /etc/apt/sources.list

内容如下

yml 复制代码

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://archive.ubuntu.com/ubuntu/ jammy main restricted
# deb-src http://archive.ubuntu.com/ubuntu/ jammy main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://archive.ubuntu.com/ubuntu/ jammy-updates main restricted
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://archive.ubuntu.com/ubuntu/ jammy universe
# deb-src http://archive.ubuntu.com/ubuntu/ jammy universe
deb http://archive.ubuntu.com/ubuntu/ jammy-updates universe
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://archive.ubuntu.com/ubuntu/ jammy multiverse
# deb-src http://archive.ubuntu.com/ubuntu/ jammy multiverse
deb http://archive.ubuntu.com/ubuntu/ jammy-updates multiverse
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://archive.ubuntu.com/ubuntu/ jammy-backports main restricted universe multiverse
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-backports main restricted universe multiverse

deb http://archive.ubuntu.com/ubuntu/ jammy-security main restricted
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-security main restricted
deb http://archive.ubuntu.com/ubuntu/ jammy-security universe
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-security universe
deb http://archive.ubuntu.com/ubuntu/ jammy-security multiverse
# deb-src http://archive.ubuntu.com/ubuntu/ jammy-security multiverse

安装依赖工具（非必要）

shell 复制代码

apt install vim wget curl net-tools  bind9-utils socat ipvsadm ipset

vim: 用于安装 Vim 编辑器。

wget: 用于下载文件的命令行工具。

curl: 用于与服务器通信的命令行工具，常用于测试和下载数据。

net-tools: 包含一些基本的网络工具，如 ifconfig，netstat 等。

conntrack-tools: 包含用于管理和查看连接跟踪表的工具（如 conntrack）。

bind9-utils: 提供一些与 DNS 相关的工具，如 dig，nslookup 等。

socat: 用于处理网络和文件的双向数据流。

ipvsadm: 用于配置 IP 虚拟服务器（IPVS）。

ipset: 用于管理 IP 集合（用于防火墙等）。

缓存离线包（非必要）

用下边这个脚本可以把以上服务的依赖下载到本地

shell 复制代码

#!/bin/bash

PACKAGES="vim wget curl net-tools bind9-utils socat ipvsadm ipset"
mkdir -p ./deb-downloads
cd ./deb-downloads || exit

for pkg in $PACKAGES; do
  echo "正在处理 $pkg 及其依赖..."
  apt-rdepends "$pkg" | grep -v "^ " | grep -vE '^(debconf-2.0|perlapi-|libc6|libgcc-s1|linux-libc-dev|gcc-|gcc-|base-files)$' | sort -u | while read dep; do
    echo "下载 $dep ..."
    apt download "$dep" || echo "警告：无法下载 $dep"
  done
done

以后安装使用

shell 复制代码

sudo dpkg -i /usr/local/src/pkg-down/tools/deb-downloads/lib*.deb
sudo dpkg -i /usr/local/src/pkg-down/tools/deb-downloads/*.deb

1.4 系统优化

内核优化

shell 复制代码

# cat >>/etc/sysctl.conf <<EOF
net.ipv4.ip_forward = 1
vm.swappiness = 0
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog =  32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.ip_local_port_range = 1024  65535
EOF

# sysctl -p

句柄数

shell 复制代码

ulimit -n 655350

永修生效修改如下两个文件

shell 复制代码

# cat >>/etc/security/limits.conf <<EOF
* soft memlock unlimited
* hard memlock unlimited
* soft nofile 655350
* hard nofile 655350
* soft nproc 655350
* hard nproc 655350
EOF

shell 复制代码

vim /etc/systemd/system.conf
DefaultLimitNOFILE=655350

或者

shell 复制代码

echo ulimit -n 655350 >>/etc/profile

1.5 安装nfs客户端

以后storageClass需要用

shell 复制代码

apt install -y nfs-common

2. 装containerd（所有节点）

需要的工具

shell 复制代码

sudo apt install apt-transport-https ca-certificates software-properties-common

添加秘钥

shell 复制代码

curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg

添加apt源

shell 复制代码

echo "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

更新索引

shell 复制代码

apt update

安装containerd

shell 复制代码

apt install containerd.io

生产containerd配置文件

shell 复制代码

mkdir -p /etc/containerd
containerd config default | sudo tee /etc/containerd/config.toml

添加 SystemdCgroup = true

shell 复制代码

# sed -i '/containerd.runtimes.runc.options/a\ \ \ \ \ \ \ \ \ \ \ \ SystemdCgroup = true' /etc/containerd/config.toml

启动

shell 复制代码

systemctl start containerd
systemctl enable containerd

测试

shell 复制代码

ctr images pull docker.io/library/nginx:alpine

缓存安装包（非必要）

shell 复制代码

apt-rdepends containerd | grep -v "^ " | grep -vE '^(debconf-2.0|perlapi-|libc6|libgcc-s1|linux-libc-dev|gcc-|base-files)$' | sort -u | xargs -I{} sh -c 'echo 下载 {}; apt download {} || echo "警告：无法下载 {}"'

以后安装使用

shell 复制代码

sudo dpkg -i /usr/local/src/pkg-down/tools/deb-downloads/lib*.deb
sudo dpkg -i /usr/local/src/pkg-down/tools/deb-downloads/*.deb

3. master的高可用方案（master上操作）

3.1 安装以及配置haproxy（3master相同）

安装

shell 复制代码

# apt -y install haproxy

修改配置
修改/etc/haproxy/haproxy.cfg文件

yml 复制代码

global
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

defaults
    mode                    tcp
    log                     global
    retries                 3
    timeout connect         10s
    timeout client          1m
    timeout server          1m

frontend  kubernetes
        bind *:7443
        mode tcp
        default_backend kubernetes_master

backend kubernetes_master
    balance     roundrobin
    server master01 10.10.239.155:6443 check maxconn 2000
    server master02 10.10.239.156:6443 check maxconn 2000
    server master03 10.10.239.161:6443 check maxconn 2000

启动

shell 复制代码

# systemctl start haproxy
# systemctl enable haproxy

3.2 keepalived

1）master-01

安装

shell 复制代码

# apt -y install keepalived

修改配置文件
修改 /etc/keepalived/keepalived.conf，从节点按注释修改。

yml 复制代码

global_defs {
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   // vrrp_strict 
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state MASTER   #从节点为BACKUP
    interface ens4  #根据实际情况修改
    virtual_router_id 150 #不能和其他集群冲突
    priority 100   #master最高，根据情况修改  
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.10.239.150    #虚拟ip
    }
}

启动服务

shell 复制代码

# systemctl enable keepalived
# systemctl start keepalived

2）master-02

安装

shell 复制代码

# apt -y install keepalived

修改配置文件
修改 /etc/keepalived/keepalived.conf，从节点按注释修改。

yml 复制代码

global_defs {
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   // vrrp_strict 
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens4
    virtual_router_id 150
    priority 90 
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.10.239.150
    }
}

启动服务

shell 复制代码

# systemctl enable keepalived
# systemctl start keepalived

3）master-03

安装

shell 复制代码

# apt -y install keepalived

修改配置文件
修改 /etc/keepalived/keepalived.conf，从节点按注释修改。

yml 复制代码

global_defs {
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   // vrrp_strict 
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens4
    virtual_router_id 150
    priority 80 
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.10.239.150
    }
}

启动服务

shell 复制代码

# systemctl enable keepalived
# systemctl start keepalived

4. 核心组件安装（所有节点）

4.1 kubelet、kubeadm、kubectl安装

使得 apt 支持 ssl 传输

shell 复制代码

apt-get update && apt-get install -y apt-transport-https

加载秘钥

shell 复制代码

curl https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | apt-key add -

添加k8s镜像源

shell 复制代码

cat <<EOF >/etc/apt/sources.list.d/kubernetes.list
deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
EOF

apt安装

shell 复制代码

 apt-get install -y kubelet=1.23.17-00 kubeadm=1.23.17-00 kubectl=1.23.17-00

runtime

shell 复制代码

crictl config runtime-endpoint /run/containerd/containerd.sock

启动服务

shell 复制代码

systemctl daemon-reload
systemctl enable kubelet && systemctl start kubelet

4.2 提前下载镜像（所有节点）【非必要】

提前下载镜像

shell 复制代码

kubeadm config images pull --image-repository registry.aliyuncs.com/google_containers

结果

shell 复制代码

W0528 03:24:37.161961  250879 version.go:105] falling back to the local client version: v1.23.17
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.23.17
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.23.17
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.23.17
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.23.17
[config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.6
[config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.5.6-0
[config/images] Pulled registry.aliyuncs.com/google_containers/coredns:v1.8.6

4.2 缺少一个镜像

说明：集群中已经将需要的镜像改成阿里云镜像了，但是初始化的时候还是会需要检查registry.k8s.io/pause:3.8这个镜像，虽然pod启动时实际用到的仍是阿里云的pause:3.8镜像

拉取镜像

缺少的这个镜像我提前推倒内网harbor了

shell 复制代码

ctr images pull harbocto.boe.com.cn/kubernetes/pause:3.8

打tag

shell 复制代码

ctr images tag harbocto.boe.com.cn/kubernetes/pause:3.8 registry.k8s.io/pause:3.8

查看结果

shell 复制代码

[root@cto-gpu-pro-m01 ~]# crictl images
IMAGE                                                    TAG                 IMAGE ID            SIZE
......
harbocto.boe.com.cn/kubernetes/pause                     3.8                 4873874c08efc       309kB
registry.k8s.io/pause                                    3.8                 4873874c08efc       309kB
......

5. 集群初始化

5.1 主机名

master-01

shell 复制代码

hostname k8s-master-01
echo "hostname k8s-master-01" > /etc/hostname

cat >> /etc/hosts <<EOF 
10.10.239.155 k8s-master-01
10.10.239.155 k8s-master-02
10.10.239.156 k8s-master-03
EOF

master-02

shell 复制代码

hostname k8s-master-02
echo "hostname k8s-master-02" > /etc/hostname

cat >> /etc/hosts <<EOF 
10.10.239.150 k8s-master-01
10.10.239.155 k8s-master-02
10.10.239.156 k8s-master-03
EOF

master-03

shell 复制代码

hostname k8s-master-04
echo "hostname k8s-master-04" > /etc/hostname

cat >> /etc/hosts <<EOF 
10.10.239.150 k8s-master-01
10.10.239.155 k8s-master-02
10.10.239.156 k8s-master-03
EOF

5.2 初始化

1）master-01

master 1

shell 复制代码

kubeadm init \
  --control-plane-endpoint "10.10.239.150:7443" \
  --upload-certs \
  --image-repository registry.aliyuncs.com/google_containers \
  --kubernetes-version v1.23.17 \
  --pod-network-cidr 10.244.0.0/16

输出

shell 复制代码

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 10.10.239.150:7443 --token 6877nh.cjqvl57r45g3pygo \
        --discovery-token-ca-cert-hash sha256:86774076430c354eb6114d703c5e05afdfbd1a2270edcd7b51117feb961719c9 \
        --control-plane --certificate-key 95555619210539f09ad585dd1a19ecbf8326180fd91a0827173b2339576c6adc

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.10.239.150:7443 --token 6877nh.cjqvl57r45g3pygo \
        --discovery-token-ca-cert-hash sha256:86774076430c354eb6114d703c5e05afdfbd1a2270edcd7b51117feb961719c9

kubectl 配置环境（按上边输出操作即可）

shell 复制代码

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

2）其他master

按上边的输出执行命令

shell 复制代码

  kubeadm join 10.10.239.150:7443 --token 6877nh.cjqvl57r45g3pygo \
        --discovery-token-ca-cert-hash sha256:86774076430c354eb6114d703c5e05afdfbd1a2270edcd7b51117feb961719c9 \
        --control-plane --certificate-key 95555619210539f09ad585dd1a19ecbf8326180fd91a0827173b2339576c6adc

kubectl 配置环境

shell 复制代码

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

3）node节点

shell 复制代码

kubeadm join 10.10.239.150:7443 --token 6877nh.cjqvl57r45g3pygo \
        --discovery-token-ca-cert-hash sha256:86774076430c354eb6114d703c5e05afdfbd1a2270edcd7b51117feb961719c9

4）检查

查看节点

shell 复制代码

root@k8s-master-01:~# kubectl get node -n kube-system
NAME            STATUS     ROLES                  AGE   VERSION
k8s-master-01   NotReady   control-plane,master   20m   v1.23.17
k8s-master-02   NotReady   control-plane,master   11m   v1.23.17
k8s-master-03   NotReady   control-plane,master   10m   v1.23.17

NotReady是因为我们没有设置状态

查看kube-system中pod

shell 复制代码

root@k8s-master-01:~# kubectl get pod -n kube-system
NAME                                    READY   STATUS    RESTARTS      AGE
coredns-6d8c4cb4d-flqtp                 0/1     Pending   0             20m
coredns-6d8c4cb4d-w8tc8                 0/1     Pending   0             20m
etcd-k8s-master-01                      1/1     Running   0             20m
etcd-k8s-master-02                      1/1     Running   0             11m
etcd-k8s-master-03                      1/1     Running   0             10m
kube-apiserver-k8s-master-01            1/1     Running   0             20m
kube-apiserver-k8s-master-02            1/1     Running   0             12m
kube-apiserver-k8s-master-03            1/1     Running   1 (10m ago)   10m
kube-controller-manager-k8s-master-01   1/1     Running   1 (11m ago)   20m
kube-controller-manager-k8s-master-02   1/1     Running   0             12m
kube-controller-manager-k8s-master-03   1/1     Running   0             9m53s
kube-proxy-2xnjx                        1/1     Running   0             11m
kube-proxy-jftx5                        1/1     Running   0             20m
kube-proxy-zpxv8                        1/1     Running   0             12m
kube-scheduler-k8s-master-01            1/1     Running   1 (11m ago)   20m
kube-scheduler-k8s-master-02            1/1     Running   0             12m
kube-scheduler-k8s-master-03            1/1     Running   0             9m45s

5.3 网络安装

有很多选择，

一般小集群我选择 flannel，见《flannel网络的安装和删除》

大的集群选择calico，见《calico网络安装和删除》

6. storageclass 的安装

安装
见文档《K8S对象-StorageClass》
FAQ
《【FAQ】1.21创建PV报错》

ubuntu 22.04安装k8s高可用集群

文章目录

1.环境准备（所有节点）

1.1 关闭无用服务

1.2 环境和网络

1.3 apt源

1.4 系统优化

1.5 安装nfs客户端

2. 装containerd（所有节点）

3. master的高可用方案（master上操作）

3.1 安装以及配置haproxy（3master相同）

3.2 keepalived

1）master-01

2）master-02

3）master-03

4. 核心组件安装（所有节点）

4.1 kubelet、kubeadm、kubectl安装

4.2 提前下载镜像（所有节点）【非必要】

4.2 缺少一个镜像

5. 集群初始化

5.1 主机名

5.2 初始化

1）master-01

2）其他master

3）node节点

4） 检查

5.3 网络安装

6. storageclass 的安装

4）检查