💥💥💞💞欢迎来到本博客❤️❤️💥💥
****🏆博主优势：🌞🌞🌞博客内容尽量做到思维缜密，逻辑清晰，为了方便读者。
⛳️**座右铭：**行百里者，半于九十。
📋📋📋++本文目录如下：++🎁🎁🎁
目录
[💥1 概述](#💥1 概述)
[📚2 运行结果](#📚2 运行结果)
[🎉3 参考文献](#🎉3 参考文献)
[🌈4 Matlab代码实现](#🌈4 Matlab代码实现)
💥1 概述
空间匹配滤波器（Spatial Matched Filter）是一种用于信号处理的滤波器。它的原理是通过将输入信号与预先存储的参考信号进行相关运算，从而增强目标信号并抑制噪声。空间匹配滤波器在雷达、声纳等领域广泛应用，用于目标检测、目标跟踪等任务。
锥形最佳波束成形器（Conical Beamformer）是一种用于信号处理的波束成形器。它通过调整传感器阵列中各个传感器的权重，使得阵列对特定方向的信号响应最大化，从而实现对目标信号的增强。锥形最佳波束成形器在无线通信、声纳等领域常用于信号接收和目标定位。
非锥形最佳波束成形器（Non-Conical Beamformer）是一种波束成形器的变种。与锥形最佳波束成形器不同的是，非锥形最佳波束成形器可以实现对多个目标信号的增强，而不仅仅是单个方向的信号。非锥形最佳波束成形器在多目标检测和定位等任务中具有重要应用。
样本矩阵反演（Sample Matrix Inversion）是一种用于信号处理的方法。它通过对接收到的信号进行采样和矩阵运算，估计信号源的位置和强度。样本矩阵反演在无线通信、雷达等领域常用于信号定位和信号源分离。
以上这些方法在阵列信号处理中都有广泛的研究和应用，它们可以提高信号的质量和可靠性，从而提升系统性能。
📚 2 运行结果
部分代码：
% We illustrate the use of tapers with the spatial matched filter for the extraction
% of a radar signal in the presence of a jamming interference source using a ULA with M = 20
% elements with \\lambda/2 spacing. The desired radar signal is known as a target and is
% present for only one sample in time. Here the target signal is at time sample (range gate)
% n = 100 and is at \\phi_s = 0\^{\\circ} with an array SNR of 20 dB. The jammer transmits a
% high-power, uncorrelated waveform (white noise). The angle of the jammer is \\phi_i = 20\^{\\circ}
% and its strength is 40 dB. The additive, sensor thermal noise has unit power (0 dB).
%
% Copyright 2016 - 2026, Ilias S. Konsoulas.
%% Workspace Initialization.
clc; clear; close all;
%% Signal Definitions.
M = 20; % Number of Array Elements.
N = 200; % Number of Signal Samples.
n = 1:N; % Sample Index Vector.
lambda = 1; % Incoming Signal Wavelength in (m).
d = lambda/2; % Interelement Distance in (m).
SNR = 20; % target volatege signal array SNR in dBs.
INR = 40; % interference array SNR in dBs.
phi_s = 0; % target azimuth angle in degrees.
phi_i = 20; % interference azimuth angle in degrees.
u_s = (d/lambda)*sin(phi_s*pi/180); % Target Normalized Spatial Frequency.
u_si = (d/lambda)*sin(phi_i*pi/180); % Jammer Normalized Spatial Frequency.
s = zeros(M,N);
s(:,100) = 10^(SNR/20)*exp(-1i*2*pi*u_s*(0:M-1).')/sqrt(M);
% Uncorrelated unit power thermal noise samples drawn from a complex Gaussian distribution
w = (randn(M,N)+1i*randn(M,N))/sqrt(2);
% The interference (jammer) vector is generated by:
% v_i = exp(-1i*pi*[0:M-1]'*sin(phi_i*pi/180))/sqrt(M); mentioned in the book is wrong.
v_i = exp(-1i*2*pi*u_si*(0:M-1).')/sqrt(M);
i_x = 10^(INR/20)*v_i*(randn(1,N)+1i*randn(1,N))/sqrt(2);
%The three signals are added to produce the overall array signal
x = s + i_x + w;
% Two beamformers (steered to phi = 0.) are applied to the resulting array returns: a spatial matched
% filter and a tapered beamformer with a -50-dB sidelobe level. The resulting beamformer output
% signals are shown in Figure 11.15. The spatial matched filter is unable to reduce the jammer
% sufficiently to observe the target signal at n = 100. However, the tapered beamformer is able
% to attenuate the jammer signal below the thermal noise level and the target is easily extracted.
% The target signal is approximately 18.5 dB with the -1.5 dB loss due to the tapering loss in (11.2.24).
%% Spatial Matched Filter or Steering Vector Beamformer.
c_mf = exp(-1i*2*pi*u_s*(0:M-1).')/sqrt(M);
% Spatial Dolph-Chebychev Window of length M = 20 with -50 dB sidelobe attenuation:
w = chebwin(M,50);
% Compute the Combined Taper by taking the Hadamard product:
c_mft = c_mf.*w;
% Normalize the combined taper vector:
🎉3 参考文献
部分理论来源于网络，如有侵权请联系删除。
1\]罗日成,李卫国,李成榕.基于阵列信号处理的变压器内局部放电源多目标定位方法\[J\].电网技术, 2006, 30(1):5.DOI:10.3321/j.issn:1000-3673.2006.01.013. \[2\]张小飞,汪飞,徐大专.阵列信号处理的理论和应用\[M\].国防工业出版社,2010. \[3\]罗景青,保铮.雷达阵列信号处理技术的新发现(一)\[J\].现代雷达, 1993, 15(2):11.DOI:CNKI:SUN:XDLD.0.1993-02-015. \[4\]马友科,宋万杰,吴顺君,等.基于多DSP的雷达阵列信号处理系统\[J\].雷达科学与技术, 2009, 7(2):4.DOI:10.3969/j.issn.1672-2337.2009.02.008. ## [🌈](https://mp.weixin.qq.com/mp/appmsgalbum?__biz=Mzk0MDMzNzYwOA==&action=getalbum&album_id=2591810113208958977#wechat_redirect "🌈")****4 Matlab代码实现****